Content Server Supported Platforms

Hello,
Is content server supported on Either MaxDB 7.5 or SAPDB 7.3 and Suse SLES 9 or 10 on zSeries 64bit?
I've looked in service.sap.com/pam, but I'm still confused. When I download the pam sheet from /pam, I can see
different results !!!.
From pam sheet, SAP Content server 6.4 is supported
on Either MaxDB 7.5 or SAPDB 7.3 and Suse SLES 9 on
zSeries 64bit ! But I could not find this combination
when I go with service.sap.com/pam => SAP Technology
Components =>SAP CONTENT SERVER !
Which one is correct ?
Appreciate any help in this regards ...
Rgds,
Sheikh Saggaf

Hi there,
if I go to service.sap.com -> SAP Technology Components -> SAP CONTENT SERVER -> SAP CONTENT SERVER 6.40, I then have the following available for MaxDB:
LINUX SUSE SLES9/ZSERIES...
Which points to:
MAXDB 7.5 64-BIT LINUX SUSE SLES9/ZSERIES 64BIT 21.03.2007 Released 21.03.2007 Released
I indeed don't see a version of SAP DB (7.3) there for those exact platform/cpu specs.
Regards,
Roland

Similar Messages

WebDAV Access: SAP Content Server

Hello everyone,
I would like to use SAP Content Server to store the courses created in LSO Authoring Environment. (Client wants it this way...i have no clue why). Now in order to use SAP Content Server here, the content server must support WebDAV access. So does the content server support WebDAV, if yes -- how to enable it and how to browse it.
Thanks,
GLM

If the documents are stored in DMS with Content Server as the repository, you should be able to access them using the DMS connector to KM. This is a business package which, when installed, exposes document stored in DMS to KM as a KM repository. Then you can browse it like any other KM repository. There are a lot of posts in this forum and others about the DMS connector.
You can also try to enable WebDAV if you Content Server is using a MaxDB database.
http://help.sap.com/saphelp_nw04s/helpdata/en/42/068edfba705415e10000000a114cbd/frameset.htm
Andrew

LSO AE - Content Server how to?

Hello everyone,
I would like to use SAP Content Server to store the courses created in LSO Authoring Environment. (Client wants it this way...i have no clue why). Now in order to use SAP Content Server here, the content server must support WebDAV access. So does the content server support WebDAV, if yes -- how to enable it and how to browse it.
Thanks,
GLM

If you have WebDAV Interface to your content management system you can integrate the Learning Portal into your existing intranet, which means SAP Enterprise Learning can run without SAP Netweaver Portal.
WebDAV interfaces link the content management component with learning management software and the authoring environment.

What is the latest prod. supported MaxDB Version w. SAP Content Server 6.40

What is the most actual supportet MaxDB Version when using with SAP Contentserver 6.40?
In PAM Page 5 (of the Powerpoint) the official Version should be 7.5.
In "install and Upgrade" NW 7.0 there is the "NW 7.0 Presentation - MaxDB Release 7.6.03" available for Download and the "MaxDB RDBMS 7.7.06 Build 10 - Windows Server on x64 64bit "
Does that mean, that the 7.7 Version is official supported for Production?
Searched the Notest but found no answer for that.
Ulrich
... half an hour later ...
just found MAXDB 7.7 Installation which suggest the 7.7 is the latest official supported.
could that be the answer?
Ulrich
Edited by: Ulrich Neumann on Feb 2, 2010 12:39 PM

Hello Ulrich,
Please refer at SAP link http://service.sap.com/pam for full platform availability information of the new version. SAP Content Server is shipped with NetWeaver 2004s SR1.
< service.sap.com/pam -> SAP NetWeaver 04 -> Database Platforms -> Content Server
   Select in MAXDB section u201CWINDOWS SERVER...   u201C >
< according PAM :
MAXDB 7.6 64-BIT is released on WINDOWS SERVER 2003/X64 64BIT for
SAP CONTENT SERVER 6.40 >
As you know the SAP installation guide for Content server is available at::
service.sap.com/installations -> SAP Components
->SAP Content Server -> Release 6.40 and higher
< Installation - Standalone Engines >
For additional information and documentation please go at SAP link:
http://service.sap.com/ContentServer
-> FAQs SAP Content Server
Thank you and best regards, Natalia Khlopina

Help needed in building a demo mobile app for DRM support using Content server 4

Hi all,
I am building an application for the blackberry to support reading of pdf and ebuf content similar to Adobe Digital Editions with DRM support . I came to know about the Adobe RMSDK .
Following is my understanding regarding my implementation , please correct me if i am wrong:
The DRM implementation on a mobile device for Adobe should satisfy the following criteria:
1. The mobile device should have a application which uses the Adobe RMSDK.
2. The publisher or the server app should install and run the content server 4
3. An acsm file which contains the rights data should be saved stored at the adobe server and should be downloaded by the mobile client.
4. The urls in the acsm xml file will be used to fetch the content for the ebook.
I have the following querries:
1. Is there an implementation of the RMSDK for java to run on blackberry.
2. Is Adobe content server 4 free to install, if not do we have a test server for this purpose.
Thanks in advance for the help.

Hi Jim,
Thanks for your kind reply. I have some more querries
Suppose if we have a client implementation of the Adove RMSDK in java, please help answer these querries:
1. How do we connect to the cs4 server (what will be the flow of data, is there a documentaion regarding the protocol to be used between the mobile client and the cs4 server in order to communicate and fetch Rights protected ebuf and pdf data.
2. The link http://www.adobe.com/products/digitaleditions/library does not give me information of how to use this library to store by ebook data and fetch drm data from the mobile client and the protocol/communication followed.
3. How do i go forward in evaluating acs4( getting a test version of cs4 and using it ). We want to build a demo app in blackberry.
thanks
Amit

Does Oracle 8i or 9i server support solaris X86 platform ?

Can i install the Oracle 8i or 9i server on a intel PIII machine ?
thanks for answer !

I'm sure that Oracle8i server supports Solaris Intel Platform and Oracle9i doesn't support Solaris Intel Platform at this moment as I know.

Multilingual support in the content server

does ECM support multilingual content?
I can't find a component and i haven't found any reference to it in its documentation.
Do i have to create a "language" field myself or is there an option?
What about the workflow? For example, i have a website in 4 languages. Is it possible to configure a workflow where the content can only be published when all 4 languages are accept?
I really can't find option for multilingual content in the server.
Anybody know more about this?

hey Passero,
Content server do support multiple lingual content(i mean it can render and store). There is no language filed as of now, so you will need to create it for your own. You will need to customized workflow, you will need to maintain a relation between all the languages (some kind of pointer) so that you know wat different contents are the translations in different languages and know whether they are approved or not.
At the time of approving one you will als need to know the state of others. If you can pin-point your requirement i may be a little more help.
I hope i must have answered few of your queries.
regards,
sapan

SAP Content Server can be installed and supported on a Virtual Machine

Hi,
I would like to know if the SAP Content Server can be installed and supported on a Virtual Machine.
Are there any sap notes to support this.
Regards,
Rajiv

SAP support VMWARE
MAXDB support VMWARE.
you are free to go.
I would ask this question in the SAP on VMWARE group at Virtualization on Windows
close message here when you created the message in the proper forum.

Are there any Adobe's partners provide licensing and support for Adobe Content Server in Germany?

Hello,
My name is Quang from Vietnam . My company is interested about Content Server and I am looking for Adobe's partners that provide licensing Content Server (like Datalogics) in Germany. I have some friends there and I hope they can help. If you know any companies, please tell me.
Thank you

I would say that it was very funny to stay on Amsterdam, but i really can't remember so much of these days, jeje

SAP Content Server 6.40 on 32 or 64 bit OS?

Hi all,
Can anyone tell me if SAP Content Server 6.40 on NW 2004s with MaxDB 7.6 will run on Windows 2003 64 or 32 bit? I have installed in on a x64 bit 2003 server now, but there seems to be some issues. For starters, I get the following error message when I try to run "http://<hostname>:<portno.>/ContentServer/ContentServer.dll?serverInfo" as part of the post-processing when installing SAP Content Server 6.40:
%1 is not a valid Win32 application.
Does anyone have any ideas?
Regards,
Thomas

Hello,
Currently, SAP Content Server do not support on Windows 64 bit system.
Please install on 32 bit system.
SAP CONTENT SERVER 6.40 -> MAXDB -> <WINDOWS SERVER... >:
MAXDB 7.6 WINDOWS SERVER 2003/IA32 32BIT
If you are SAP customer, you will find more detailed information about
availability in the SAP Product Availability Matrix (PAM) at
http://service.sap.com/pam (This is the official source for all SAP
Netweaver-related availability information.)
http://service.sap.com/pam -> SAP NETWEAVER -> SAP NETWEAVER 20004S
-> Database Platforms -> Content Server -> MAXDB -> <WINDOWS SERVER... >
< See the SAP note 919225 for Windows IA32 system requirements.>
Thank you and best regards, Natalia Khlopina

Searching multiple Content Server Portlets

I am able to search single Content Server Portlet and get results using following lines of code.
IPTSession ptSession = new InProcSession();
ptSession.Connect(AppSettings.PTUserName(), AppSettings.PTPassword(), null);
IPTSearchRequest ptSearchRequest = ptSession.GetSearchRequest();
ptSearchRequest.SetSettings(PT_SEARCH_SETTING.PT_SEARCHSETTING_APPS, PT_SEARCH_APPS.PT_SEARCH_APPS_CONTENT);
ptSearchRequest.SetSettings(PT_SEARCH_SETTING.PT_SEARCHSETTING_ASSOC_PORTLET_ID, 10468);
IPTSearchQuery ptSearchQuery = ptSearchRequest.CreateBasicQuery(query, null);
IPTSearchResponse ptSearchResponse = ptSearchRequest.Search(ptSearchQuery);
return ptSearchResponse;
However Type Cast exception comes at run time when we pass array containing multiple Portlets ID although code gets compiled
IPTSession ptSession = new InProcSession();
ptSession.Connect(AppSettings.PTUserName(), AppSettings.PTPassword(), null);
IPTSearchRequest ptSearchRequest = ptSession.GetSearchRequest();
ptSearchRequest.SetSettings(PT_SEARCH_SETTING.PT_SEARCHSETTING_APPS, PT_SEARCH_APPS.PT_SEARCH_APPS_CONTENT);
int[][] ar = new int[2][];
int[] int1 = new int[]{ 0, 10468 };
int[] int2 =new int[]{ 0, 23757 };
ar[0] = int1;
ar[1] = int2;
ptSearchRequest.SetSettings(PT_SEARCH_SETTING.PT_SEARCHSETTING_ASSOC_PORTLET_ID, ar);
IPTSearchQuery ptSearchQuery = ptSearchRequest.CreateBasicQuery(query, null);
IPTSearchResponse ptSearchResponse = ptSearchRequest.Search(ptSearchQuery);
return ptSearchResponse;
It will be quite useful if anyone of you can help us if Plumtree API support this. Or else we need to build another layer to search each Portlet and merge results.
Platform Details:
Plumtree Portal 5.0.4
Content Server 6.1
Regards
Kishore GVK

Hi Praveen,
I have not done portal configuration for SAP DMS. But as per the link below, you can assign multiple SAP DMS repository managers which can refer to separate content servers.
http://help.sap.com/saphelp_dimp50/helpdata/EN/32/2a840d132af04fa2f0b31ebf3e8a78/content.htm
Wait for other expert comments if they can answer your query.
Regards
Amit

SAP Content Server 6.40 on 64 bit Windows

Hello,
As per PAM SAP Content Server 6.40 is supported on Windows but only on "WINDOWS SERVER 2003/IA32 32BIT" version.
So does it imply that content server is not supported on 64 bit Windows platform??
I also want to know about Windows Server 2008. Although it is not mentioned in PAM, is it supported for content server? Additionally I've checked SAP Note "1054740 - SAP System Installation on Windows Server 2008.txt" again which did not give any fair idea about Windows 2008 platform support.
Please throw some light on 64 bit windows support as well as for Windows 2008 platform support for content server (which implicitly has MAXDB as database).
Thanks & Regards,
Kashyap Shah
SAP Technology Consultant

Hy,
in PAM searching for the SAP Content Server 6.40 :
Is avaliable for x64 64 Bit and IA64 64-Bit
[https://websmp203.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=RELEASE&00200682500000002804=01200615320900001396&00200682500000003818=OS]
kind regards
Tom

SAP Content Server

Dear Experts,
I got problem in installing SAP Content Server 6.30 in Solaris 9 (Unix-SPARC 64bit). After discus with OSS they sugest to review the Apache installation, i try to follow the OSS note number 664384, but i confused with some error about the compilation, here is my compilation step :
1. We install gcc for solaris 9 from www.sunfreeware.com
2. In PATH we add PATH=/usr/bin:/opt/sfw/gcc-3/bin
3. run configure --prefix=/home/sapcs --enable-module=most --enable-shared=max
    i got error :
============================================================
    ./helpers/TestCompile: make: not found
++ doing sanity check on compiler and options+
** A test compilation with your Makefile configuration
** failed. The below error output from the compilation
** test will give you an idea what is failing. Note that
** Apache requires an ANSI C Compiler, such as gcc.
======== Error Output for sanity check ========
./helpers/TestCompile: make: not found
============= End of Error Report =============
4. Then we add PATH=/usr/bin:/usr/ccs/bin:/opt/sfw/gcc-3/bin and CFLAGS="-xarch=v9" (note 664384)
================================================
re run ./configure --prefix=/home/sapcs/ --enable-module=most --enable-shared=max
Configuring for Apache, Version 1.3.41
++ using installation path layout: Apache (config.layout)+
Creating Makefile
Creating Configuration.apaci in src
++ enabling mod_so for DSO support+
Creating Makefile in src
++ configured for Solaris 290 platform+
++ setting C compiler to gcc+
++ setting C pre-processor to gcc -E+
++ using "tr [a-z] [A-Z]" to uppercase+
++ checking for system header files+
++ adding selected modules+
    o rewrite_module uses ConfigStart/End
      disabling DBM support for mod_rewrite
      (perhaps you need to add -ldbm, -lndbm or -lgdbm to EXTRA_LIBS)
    o dbm_auth_module uses ConfigStart/End
++ using builtin Expat+
++ checking sizeof various data types+
++ doing sanity check on compiler and options+
** A test compilation with your Makefile configuration
** failed. The below error output from the compilation
** test will give you an idea what is failing. Note that
** Apache requires an ANSI C Compiler, such as gcc.
======== Error Output for sanity check ========
cd ..; gcc -DSOLARIS2=290 -DNO_DBM_REWRITEMAP -DUSE_EXPAT -I./lib/expat-lite -xarch=v9 `./apaci`     -o helpers/dummy helpers/dummy.c   -lsocket -lnsl -lpthread
gcc: language arch=v9 not recognized
ld: fatal: file helpers/dummy.c: unknown file type
ld: fatal: File processing errors. No output written to helpers/dummy
collect2: ld returned 1 exit status
*** Error code 1
make: Fatal error: Command failed for target `dummy'
============= End of Error Report =============
Aborting!
5. I tried to remove the env variable CFLAGS="-xarch=v9", and the result it successfuly installed then i tried to install SAP Content Server 6.30, the installation had been done suceesfully but when i tried to start apache, it can not load the mod_sapcs.so
Syntax error on line 205 of /home_sapcs/conf/httpd.conf:
Cannot load /home_sapcs/libexec/mod_sapcs.so into server: ld.so.1: httpd: fatal: /home_sapcs/libexec/mod_sapcs.so: wrong ELF class: ELFCLASS64
apachectl start: httpd could not be started
Do you have any idea with this problem? I really need advice for this.
Thanks in advance
Bagus

Hello Experts,
Please provide the solution, how the problem was resolved. Even I am getting following error right after installation of Content server when installation prompts to restart the server, when I try to stop apache on Solaris 10, it throws following error:
Syntax error on line 233 of /usr/local/apache2/conf/httpd.conf:
Cannot load /usr/local/apache2/modules/mod_sapcs2.so into server: ld.so.1: httpd: fatal: /usr/local/apache2/modules/mod_sapcs2.so: wrong ELF class: ELFCLASS64
I am facing this issue since very long now.
Please reply at earliest.
Thanks.
Regards,
Kashyap Shah

Installtion of SAP Content Server 6.40 on Solaris

We are planning to install the SAP Content Server 6.40 on Solaris10 release 09 on SPARC Server. I have gone through the installation guide as well.
Kindly confirm the below steps are correct, if I am not wrong.
1.     Pre-Requisities
u2022     Create Group and User.
u2022     Create file system system.
2.     Extraction of source code
u2022     sapcs:~$ gunzip < httpd-2.0.62.tar.gz | tar xvf u2013
3.     Configure APACHE Source to Solaris platform.
u2022     sapcs:~/httpd-2.0.52$ configure u2013prefix=/usr/users/sapcs u2013 --enable-mods-shared=most u2013with-mpm=prefork
u2022     Go to /conf Directory open the httpd.conf change user, group and Port.
u2022     $sapcs:~/bin$ apachectl start (start webserver)
u2022     $sapcs:~/bin$ apachectl restart
u2022     $sapcs:~/bin$ apachectl stop
u2022     Create soft link home
4.     install
u2022     sapcs:~/httpd-2.0.52$ make
u2022     sapcs:~/httpd-2.0.52$ make install
5.     Then start installation of SAP Content Server 6.40
u2022     ./sapinst (SAPinst from the Installation Master DVD)
Kindly let me know if i have missed any activities..
Regards,
Panu.

Hello,
Currently, SAP Content Server do not support on Windows 64 bit system.
Please install on 32 bit system.
SAP CONTENT SERVER 6.40 -> MAXDB -> <WINDOWS SERVER... >:
MAXDB 7.6 WINDOWS SERVER 2003/IA32 32BIT
If you are SAP customer, you will find more detailed information about
availability in the SAP Product Availability Matrix (PAM) at
http://service.sap.com/pam (This is the official source for all SAP
Netweaver-related availability information.)
http://service.sap.com/pam -> SAP NETWEAVER -> SAP NETWEAVER 20004S
-> Database Platforms -> Content Server -> MAXDB -> <WINDOWS SERVER... >
< See the SAP note 919225 for Windows IA32 system requirements.>
Thank you and best regards, Natalia Khlopina

SAP Content Server error

Hello colleagues,
I have this error when start the Content Server,
host:(/directory/apache/bin)(root)#./apachectl start
httpd: Syntax error on line 66 of /directory/apache/conf/httpd.conf: Cannot load modules/mod_sapcs22.so into
server: /directory/apache/modules/mod_sapcs22.so: undefined symbol: ap_log_error
Can you help me?
Thanks

Hi Reagan,
Execute the first parameter,
rgqaserp:(/sapcontreps/apache/modules)(root)#cat /sapcontreps/apache/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/sapcontreps/apache"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:logs
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 1090
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule sapcs_module modules/mod_sapcs22.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
#LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
LoadModule mime_module modules/mod_mime.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule info_module modules/mod_info.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
    AllowOverride none
    Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/sapcontreps/apache/htdocs"
<Directory "/sapcontreps/apache/htdocs">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   AllowOverride FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
    Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "logs/access_log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "logs/access_log" combined
</IfModule>
<IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "/sapcontreps/apache/cgi-bin/"
</IfModule>
<IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock cgisock
</IfModule>
# "/sapcontreps/apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/sapcontreps/apache/cgi-bin">
    AllowOverride None
    Options None
    Require all granted
</Directory>
<IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
<IfModule mod_sapcs.cpp>
AddModuleInfo ContentServer "SAP Content Server 640/0 (Prototype) (C) SAP AG 1998, 2001"
CSConfigPath /sapcontreps/conf/cs.conf
<Location /sapcs>
SetHandler sapcs_module
Allow from all
</Location>
<Location /ContentServer/ContentServer.dll>
SetHandler sapcs_module
Allow from all
</Location>
<Location /contentserver/contentserver.dll>
SetHandler sapcs_module
Allow from all
</Location>
</IfModule>
Second parameter,
rgdeverp:(/sapcontreps/apache/modules)(root)#ls -la /sapcontreps/apache/modules
total 5544
drwxrwxrwx 2 sapcs sapsys   4096 Jun 12 15:46 .
drwxrwxrwx 15 sapcs sapsys   4096 Jun 12 14:56 ..
-rwxrwxrwx 1 sapcs sapsys 13836 Jun 12 14:54 httpd.exp
lrwxrwxrwx 1 sapcs sapsys     34 Jun 12 15:46 libsapsecu.so -> /sapcontreps/modules/libsapsecu.so
-rwxrwxrwx 1 sapcs sapsys 34756 Jun 12 14:56 mod_access_compat.so
-rwxrwxrwx 1 sapcs sapsys 31861 Jun 12 14:56 mod_actions.so
-rwxrwxrwx 1 sapcs sapsys 44418 Jun 12 14:56 mod_alias.so
-rwxrwxrwx 1 sapcs sapsys 30426 Jun 12 14:56 mod_allowmethods.so
-rwxrwxrwx 1 sapcs sapsys 41605 Jun 12 14:56 mod_auth_basic.so
-rwxrwxrwx 1 sapcs sapsys 84126 Jun 12 14:56 mod_auth_digest.so
-rwxrwxrwx 1 sapcs sapsys 68399 Jun 12 14:56 mod_auth_form.so
-rwxrwxrwx 1 sapcs sapsys 30531 Jun 12 14:56 mod_authn_anon.so
-rwxrwxrwx 1 sapcs sapsys 36079 Jun 12 14:56 mod_authn_core.so
-rwxrwxrwx 1 sapcs sapsys 40100 Jun 12 14:56 mod_authn_dbd.so
-rwxrwxrwx 1 sapcs sapsys 32532 Jun 12 14:56 mod_authn_dbm.so
-rwxrwxrwx 1 sapcs sapsys 32359 Jun 12 14:56 mod_authn_file.so
-rwxrwxrwx 1 sapcs sapsys 49757 Jun 12 14:56 mod_authn_socache.so
-rwxrwxrwx 1 sapcs sapsys 61854 Jun 12 14:56 mod_authz_core.so
-rwxrwxrwx 1 sapcs sapsys 42581 Jun 12 14:56 mod_authz_dbd.so
-rwxrwxrwx 1 sapcs sapsys 35071 Jun 12 14:56 mod_authz_dbm.so
-rwxrwxrwx 1 sapcs sapsys 34704 Jun 12 14:56 mod_authz_groupfile.so
-rwxrwxrwx 1 sapcs sapsys 35256 Jun 12 14:56 mod_authz_host.so
-rwxrwxrwx 1 sapcs sapsys 30435 Jun 12 14:56 mod_authz_owner.so
-rwxrwxrwx 1 sapcs sapsys 30802 Jun 12 14:56 mod_authz_user.so
-rwxrwxrwx 1 sapcs sapsys 105072 Jun 12 14:56 mod_autoindex.so
-rwxrwxrwx 1 sapcs sapsys 34253 Jun 12 14:56 mod_buffer.so
-rwxrwxrwx 1 sapcs sapsys 192292 Jun 12 14:56 mod_cache.so
-rwxrwxrwx 1 sapcs sapsys 84567 Jun 12 14:56 mod_cache_disk.so
-rwxrwxrwx 1 sapcs sapsys 88616 Jun 12 14:56 mod_cache_socache.so
-rwxrwxrwx 1 sapcs sapsys 98717 Jun 12 14:56 mod_cgid.so
-rwxrwxrwx 1 sapcs sapsys 354271 Jun 12 14:56 mod_dav.so
-rwxrwxrwx 1 sapcs sapsys 189761 Jun 12 14:56 mod_dav_fs.so
-rwxrwxrwx 1 sapcs sapsys 59275 Jun 12 14:56 mod_dbd.so
-rwxrwxrwx 1 sapcs sapsys 35504 Jun 12 14:56 mod_dir.so
-rwxrwxrwx 1 sapcs sapsys 33559 Jun 12 14:56 mod_dumpio.so
-rwxrwxrwx 1 sapcs sapsys 31544 Jun 12 14:56 mod_env.so
-rwxrwxrwx 1 sapcs sapsys 40037 Jun 12 14:56 mod_expires.so
-rwxrwxrwx 1 sapcs sapsys 63988 Jun 12 14:56 mod_ext_filter.so
-rwxrwxrwx 1 sapcs sapsys 39211 Jun 12 14:56 mod_file_cache.so
-rwxrwxrwx 1 sapcs sapsys 52811 Jun 12 14:56 mod_filter.so
-rwxrwxrwx 1 sapcs sapsys 60936 Jun 12 14:56 mod_headers.so
-rwxrwxrwx 1 sapcs sapsys 158790 Jun 12 14:56 mod_include.so
-rwxrwxrwx 1 sapcs sapsys 66838 Jun 12 14:56 mod_info.so
-rwxrwxrwx 1 sapcs sapsys 36196 Jun 12 14:56 mod_lbmethod_bybusyness.so
-rwxrwxrwx 1 sapcs sapsys 36188 Jun 12 14:56 mod_lbmethod_byrequests.so
-rwxrwxrwx 1 sapcs sapsys 36192 Jun 12 14:56 mod_lbmethod_bytraffic.so
-rwxrwxrwx 1 sapcs sapsys 48496 Jun 12 14:56 mod_lbmethod_heartbeat.so
-rwxrwxrwx 1 sapcs sapsys 86665 Jun 12 14:56 mod_log_config.so
-rwxrwxrwx 1 sapcs sapsys 40163 Jun 12 14:56 mod_log_debug.so
-rwxrwxrwx 1 sapcs sapsys 31797 Jun 12 14:56 mod_logio.so
-rwxrwxrwx 1 sapcs sapsys 48254 Jun 12 14:56 mod_macro.so
-rwxrwxrwx 1 sapcs sapsys 54195 Jun 12 14:56 mod_mime.so
-rwxrwxrwx 1 sapcs sapsys 106526 Jun 12 14:56 mod_negotiation.so
-rwxrwxrwx 1 sapcs sapsys 291551 Jun 12 14:56 mod_proxy.so
-rwxrwxrwx 1 sapcs sapsys 171766 Jun 12 14:56 mod_proxy_ajp.so
-rwxrwxrwx 1 sapcs sapsys 108144 Jun 12 14:56 mod_proxy_balancer.so
-rwxrwxrwx 1 sapcs sapsys 54249 Jun 12 14:56 mod_proxy_connect.so
-rwxrwxrwx 1 sapcs sapsys 38536 Jun 12 14:56 mod_proxy_express.so
-rwxrwxrwx 1 sapcs sapsys 61607 Jun 12 14:56 mod_proxy_fcgi.so
-rwxrwxrwx 1 sapcs sapsys 112538 Jun 12 14:56 mod_proxy_ftp.so
-rwxrwxrwx 1 sapcs sapsys 114424 Jun 12 14:56 mod_proxy_http.so
-rwxrwxrwx 1 sapcs sapsys 56400 Jun 12 14:56 mod_proxy_scgi.so
-rwxrwxrwx 1 sapcs sapsys 55514 Jun 12 14:56 mod_proxy_wstunnel.so
-rwxrwxrwx 1 sapcs sapsys 32760 Jun 12 14:56 mod_ratelimit.so
-rwxrwxrwx 1 sapcs sapsys 40376 Jun 12 14:56 mod_remoteip.so
-rwxrwxrwx 1 sapcs sapsys 45091 Jun 12 14:56 mod_reqtimeout.so
-rwxrwxrwx 1 sapcs sapsys 37224 Jun 12 14:56 mod_request.so
-rwxrwxrwx 1 sapcs sapsys 171049 Jun 12 14:56 mod_rewrite.so
lrwxrwxrwx 1 sapcs sapsys     35 Jun 12 15:46 mod_sapcs22.so -> /sapcontreps/modules/mod_sapcs22.so
-rwxrwxrwx 1 sapcs sapsys 119242 Jun 12 14:56 mod_sed.so
-rwxrwxrwx 1 sapcs sapsys 57944 Jun 12 14:56 mod_session.so
-rwxrwxrwx 1 sapcs sapsys 32806 Jun 12 14:56 mod_session_cookie.so
-rwxrwxrwx 1 sapcs sapsys 47023 Jun 12 14:56 mod_session_dbd.so
-rwxrwxrwx 1 sapcs sapsys 44102 Jun 12 14:56 mod_setenvif.so
-rwxrwxrwx 1 sapcs sapsys 53976 Jun 12 14:56 mod_slotmem_shm.so
-rwxrwxrwx 1 sapcs sapsys 45214 Jun 12 14:56 mod_socache_dbm.so
-rwxrwxrwx 1 sapcs sapsys 35686 Jun 12 14:56 mod_socache_memcache.so
-rwxrwxrwx 1 sapcs sapsys 68519 Jun 12 14:56 mod_socache_shmcb.so
-rwxrwxrwx 1 sapcs sapsys 39669 Jun 12 14:56 mod_speling.so
-rwxrwxrwx 1 sapcs sapsys 63924 Jun 12 14:56 mod_status.so
-rwxrwxrwx 1 sapcs sapsys 43320 Jun 12 14:56 mod_substitute.so
-rwxrwxrwx 1 sapcs sapsys 33237 Jun 12 14:56 mod_unique_id.so
-rwxrwxrwx 1 sapcs sapsys 33466 Jun 12 14:56 mod_unixd.so
-rwxrwxrwx 1 sapcs sapsys 33615 Jun 12 14:56 mod_userdir.so
-rwxrwxrwx 1 sapcs sapsys 25961 Jun 12 14:56 mod_version.so
-rwxrwxrwx 1 sapcs sapsys 37707 Jun 12 14:56 mod_vhost_alias.so
But when stop or stat I have the error,
rgqaserp:(/sapcontreps/apache/bin)(root)#./apachectl start
httpd: Syntax error on line 66 of /sapcontreps/apache/conf/httpd.conf: Cannot load modules/mod_sapcs22.so into server: /sapcontreps/apache/modules/mod_sapcs22.so: ELF file data encoding not little-endian
Can you help me?
Thanks

Content Server Supported Platforms

Similar Messages

Maybe you are looking for