Content Server - Which SQL statements are running?

Hi sap lovers! Does anyone aware of which sql statements being run on the maxDB part when, e.g saving a document (or retrieving a document) (on the ABAP part) within our DMS landscape?
And at the whole, Is It possible to monitor sqls running on MAXDB, like we can see in ST04
-> Oracle Session
Regards,
Vladimir

You can find that out doing the following:
- on any ABAP system start DB59
- enter the data to connec to the content server database
- doubleclick on the made entry so you get in "DB50 for remote databases"
- switch on the command monitor
- then use the task manager and press on "running commands"
Markus

Similar Messages

BPC 7 MS: Which SQL statements are created for writing with input schedule?

Hi,
I wanted to know which SQL statements are created and executed if a user submits values using an Excel input schedule to an application.
When I check the correspoinding MS SQL server log files, I see that data is read from the three partitions belonging to the application and put into a temporary table, but I can't find anything about writing back to the application (presumably the WB partiton...) in the log.
There are some cryptic entries in the log file as well, but they are not human-readale... are there any BPC logfiles that could tell me which SQL statements are created and executed to write back the new values to the application? Thanks!

Hi,
As far as i know, when a user send data entry from an excel schedule, it will be written in the WB table of the application (for each application, you have 3 Data tables : WB, Fact2 and Fact).
I presume that the SQL statement may be an INSERT or UPDATE statement.
Technically, the update is done by the send governor service (hosted on your BPC application server).
There is no log that will show you the SQL Statement besides a SQL trace that you have to setup in SQL Server 2005 Manager Studio.
btw, the data are written in the Relationnal database but are read from the OLAP cube. The olap Cube is split in 3 partitions (ROLAP on WB table / and MOLAP on fact and fat2). Wich mean that every new entry in WB will be automatically "updated" in the cube.
Some DM packages can directly write data in fact2 table. In this case you need to reprocess the cube to get it loaded.

Which two statements are true about WHERE and HAVING clause ?

Which two statements are true about WHERE and HAVING clause ?
1. WHERE clause can be used to restict rows only
2.HAVING clause can be used to restrict groups only
3.HAVING clause can be used to restrict groups and rows
Plz help me in dis ques...which two will be correct...i think its 1 and 2...but not sure.

863180 wrote:
Plz help me in dis ques...which two will be correct...i think its 1 and 2...but not sure.If you are not sure then you do not fully understand HAVING.
SY.

Which SQL statement is he running?

I have some oracle processes which are consuming a big fraction of the CPU resources and the load is so big that no users can connect (except with connect / as sysdba). Knowing their PID (from the UNIX top command), and connecting internally on Oracle, is there a way to know which statements are currently being performed by these users?
NB: Database in question is Oracle 10g.

Just because users cannot connect does not mean the problem is a "load" problem.
What does v$session_wait show that connected sessions are waiting on? Are any sessions lock waited?
If there are lockwaited sessions are any of the Oracle rdbms background sessions involved in the lock problem?
In situations where people cannot connect or take five minutes to do so the problem usually comes down to improper configuration of the database, poor design of the most heavily hit section of an application, or your are especially lucky and have managed to hit a bug.
In the absence of a locking problem or every session waiting on the same resouce then a statspack for a short duration is worth a shot (providing it will run).
HTH -- Mark D Powell --

SQL Cluster 2008 RTM related issue- One of the Node is automatically disabiling the Agent XP's. However, all SQL Services are running

Hi All,
Please help. I am having a Prodution SQL 2008 RTM Cluster with two nodes-where node 1 works without any problem.However, if i failover to node 2-Agent xp's are disabled automatically. When i verify the SQL Services are node 2 are running fine.
Checked Agent.out file which did not give much info than below:
2012-09-09 08:00:12 - + [162] Internal request (from SetJobNextRunDate [reason: schedule will not run again]) to deactivate schedule 47
2012-09-15 06:50:30 - ? [131] SQLSERVERAGENT service stopping due to a stop request from a user, process, or the OS...
2012-09-15 06:50:41 - ? [098] SQLServerAgent terminated (normally)
I have verified that hardware and software of both nodes are identical. Still ,this issue persists always.
Please let me know the solution for this. it really pressurise on Production having one node active and other not active.
Harithasri

sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'Agent XPs', 1;
GO
RECONFIGURE
GO
Are the SQL Agent running under the same accounts?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Blog:
Large scale of database and data cleansing
MS SQL Consultants:
Improves MS SQL Database Performance

Error when generating the SQL statement while running the Query

Hello SDN Mates,
Am using three cubes in one infoset and build a query on that. Intially it was running fine, but now am getting error generating the SQL statement. Can you please throw some light on this. Your idea would be highly appreciated.
Thanks and Regards
Arun S

Hi Arun
is there any change in the objects (Check also the consistency of infoobject ) included in infoset, just make sure those are active, open the query in designer and check if no error/warning message are present
Thanks
Tripple k

Can we change/Modify BI server generated Sql query and run to fetch data

Hi,
My client is saying that there is an option to modify bi server generated sql query to fetch data from source.
question:As a request is made in presentation services, A dynamic sql query is generated and fetches data from source. all this is loggedin Nqlquery log..well can we change/modify the sql query generated and run modified sql query to fetch data from source. ., if so how? if not why?
Thanks in advance
Edited by: user10794468 on Jun 16, 2009 6:29 PM
Edited by: user10794468 on Aug 12, 2009 6:58 PM

Thank you so much for your reply..
..Can we also modify sql query generated by bi server to fetech data. the query's which we see in query log file..

Archival into content server - Which is a right forum??

All,
We are planning to use forms output to be archived into SAP Content Server running on MaxDB. Does anybody have any experience to share or point me to the right forum
> Can it perform well with 6-10 TB of potential data in the next 4-5 years
> Can documents be attached to the content (archive an invoice output and then scan a document and attach to the same invoice)
Thanks!!!
M

All,
We are planning to use forms output to be archived into SAP Content Server running on MaxDB. Does anybody have any experience to share or point me to the right forum
> Can it perform well with 6-10 TB of potential data in the next 4-5 years
> Can documents be attached to the content (archive an invoice output and then scan a document and attach to the same invoice)
Thanks!!!
M

Latency is very high when SELECT statements are running for LONG

We are a simple DOWN STREAM streams replication environment ( Archive log is shipped from source , CAPTURE & APPLY are running on destination DB).
Whenever there is a long running SELECT statement on TARGET the latency become very high.
SGA_MAX_SIZE = 8GB
STREAMS_POOL_SIZE=2GB
APPLY parallelism = 4
How can resolve this issue?

Is the log file shipped but not acknowledge? -- NO
Is the log file not shipped? -- It is shipped
Is the log file acknowledged by not applied? -- Yes...But Apply process was not stopped. it may be slow or waiting for something?
It is 10g Environment. I will run AWR.. But what should i look for in AWR?

How to find out which materialized views are running on the DB?

So I have a long list of MVs stored on the DB.
Is there a script to find out which MVs are being refreshed right now?
Help!
Thanks

Hi ,
You can use the following data dictionary view to get information on when Mview was last refreshed--
SQL> desc DBA_MVIEWS
Name                                                  Null?    Type
OWNER                                                 NOT NULL VARCHAR2(30)
MVIEW_NAME                                            NOT NULL VARCHAR2(30)
CONTAINER_NAME                                        NOT NULL VARCHAR2(30)
QUERY                                                          LONG
QUERY_LEN                                                      NUMBER(38)
UPDATABLE                                                      VARCHAR2(1)
UPDATE_LOG                                                     VARCHAR2(30)
MASTER_ROLLBACK_SEG                                            VARCHAR2(30)
MASTER_LINK                                                    VARCHAR2(128)
REWRITE_ENABLED                                                VARCHAR2(1)
REWRITE_CAPABILITY                                             VARCHAR2(9)
REFRESH_MODE                                                   VARCHAR2(6)
REFRESH_METHOD                                                 VARCHAR2(8)
BUILD_MODE                                                     VARCHAR2(9)
FAST_REFRESHABLE                                               VARCHAR2(18)
LAST_REFRESH_TYPE                                              VARCHAR2(8)
LAST_REFRESH_DATE                                              DATE
STALENESS                                                      VARCHAR2(19)
AFTER_FAST_REFRESH                                             VARCHAR2(19)
UNKNOWN_PREBUILT                                               VARCHAR2(1)
UNKNOWN_PLSQL_FUNC                                             VARCHAR2(1)
UNKNOWN_EXTERNAL_TABLE                                         VARCHAR2(1)
UNKNOWN_CONSIDER_FRESH                                         VARCHAR2(1)
UNKNOWN_IMPORT                                                 VARCHAR2(1)
UNKNOWN_TRUSTED_FD                                             VARCHAR2(1)
COMPILE_STATE                                                  VARCHAR2(19)
USE_NO_INDEX                                                   VARCHAR2(1)
STALE_SINCE                                                    DATE
SQL>

Can we use Selection Criteria Screen to tell Query which SQL script to run?

Dear All,
When I run this code, it gives me the screen below:
declare @ScanOp4 nvarchar (30)
set @ScanOp4=
/*select T3.U_ScanOp4 from [dbo].[@SCANNING] T3 where T3.U_ScanOp4*/ '[%0]'
I have used Tools -> Customization to define a UDT and UDF
Query - Selection Criteria
Invoice / Credit Note?            [----------------- ]
                                 (there's a drop-down arrow with 2 choices:
                                  Inv = Invoice
                                  CN = Credit Note
[OK]       [Cancel]
Now, I have 2 very similar queries; the only difference is that they use different tables because one is for
Purchases (OPCH/PCH1), and the other is for Credit Memos (ORPC/RPC1)
I want to put the above declaration together with my 2 queries all in a single query so that:
(a) If I select 'Invoice', the Invoice part is executed and only invoices are displayed,
(b) If I select 'Credit Note', the Credit Note part is executed and only Credit Notes are displayed.
Do you think such a Query is possible? If yes, please give me an idea how I can achieve it.
I don't want to use UNION ALL because one of my fields is a LINK field to which I have linked all PDF Scanned documents.
I want to preserve the links, since this is the reason I'm writing the query.
Thanks
Leon Lai
Here are my skeleton codes
1st Query: User selects 'Invoice' -
SELECT
T0.[TaxDate] AS 'Doc Dt',
T5.[TransType] AS 'Txn Type',
T0.[DocNum] AS 'Doc No.',
T0.[DocTotal] AS 'Amount'
FROM [dbo].[OPCH] T0
INNER JOIN [dbo].[PCH1] T1 ON T0.[DocEntry] = T1.[DocEntry]
INNER JOIN [dbo].[OJDT] T5 ON T0.[TransID] = T5.[TransID]
2nd Query: User selects 'Credit Note' -
SELECT
T0.[TaxDate] AS 'Doc Dt',
T5.[TransType] AS 'Txn Type',
T0.[DocNum] AS 'Doc No.',
T0.[DocTotal] AS 'Amount'
FROM [dbo].[ORPC] T0
INNER JOIN [dbo].[RPC1] T1 ON T0.[DocEntry] = T1.[DocEntry]
INNER JOIN [dbo].[OJDT] T5 ON T0.[TransID] = T5.[TransID]

Try this:
declare @ScanOp4 nvarchar (30)
set @ScanOp4=
/*select T3.U_ScanOp4 from [dbo].[@SCANNING] T3 where T3.U_ScanOp4*/ '[%0]'
If @ScanOp4='Inv'
SELECT
T0.[TaxDate] AS 'Doc Dt',
T5.[TransType] AS 'Txn Type',
T0.[DocNum] AS 'Doc No.',
T0.[DocTotal] AS 'Amount'
FROM [dbo].[OPCH] T0
INNER JOIN [dbo].[PCH1] T1 ON T0.[DocEntry] = T1.[DocEntry]
INNER JOIN [dbo].[OJDT] T5 ON T0.[TransID] = T5.[TransID]
If @ScanOp4='CN'
SELECT
T0.[TaxDate] AS 'Doc Dt',
T5.[TransType] AS 'Txn Type',
T0.[DocNum] AS 'Doc No.',
T0.[DocTotal] AS 'Amount'
FROM [dbo].[ORPC] T0
INNER JOIN [dbo].[RPC1] T1 ON T0.[DocEntry] = T1.[DocEntry]
INNER JOIN [dbo].[OJDT] T5 ON T0.[TransID] = T5.[TransID]

SQl query are running slow in comparison to oracle 8i

Hi everybody,
I have two systems one is Oracle 9i on Windows 2000 and
one is Oracle 8i running on Windows 2000. The database structure is the same. When I run the following qry in
Oracle 9i
SELECT COUNT (a.aint_ac_no) AS total_ac_no, adet_int_rate,
SUM (fun_max_cbal_bal (a.aint_ac_no,
a.aint_subsys_cd,
TO_DATE ('30/01/2009', 'DD/MM/YYYY')
) AS balance
FROM domst120 a, domst730 b
WHERE a.aint_interest_slab_cd = b.adet_srno
AND a.aint_subsys_cd = '137'
AND fun_max_cbal_bal (a.aint_ac_no,
a.aint_subsys_cd,
TO_DATE ('30/01/2009', 'DD/MM/YYYY')
) <> 0
AND a.aint_eff_date =
(SELECT MAX (c.aint_eff_date)
FROM domst120 c
WHERE a.aint_bank_cd = c.aint_bank_cd
AND a.aint_branch_cd = c.aint_branch_cd
AND a.aint_bank_cd = '857'
AND a.aint_branch_cd = '6'
AND a.aint_subsys_cd = c.aint_subsys_cd
AND a.aint_ac_no = c.aint_ac_no)
GROUP BY b.adet_int_rate
ORDER BY b.adet_int_rate
it takes 6 min to complete.
the same qry running in Oracle 8i takes 2 seconds
to complete.
The index structure is same in both systems also the tables
were analyzed with compute statistics.

What do you expect?! Oracle 9i and Oracle 8i are different particularly by optimizer cost-based(9i) and rule-based(8i) :)
what about both execution plans?

Setting a sql statement to run at a later time

Hello,
Is there a way to submit a sql but let it run at a later time? Maybe a sleep function? Thank you.

Hi Jafar,
We can also opt for the following utility :----
The DBMS_LOCK.sleep procedure in oracle is used to pause a program for the specified number of seconds. The time can be specified down to hundredths of a second:
BEGIN
DBMS_LOCK.sleep(seconds => 5.01);
END;
Cheers :)

Issue when stats are run

Hi All,
When we execute the stats we get the below error.Its a MSCS cluster enterpise portal oracle 10g
C:\Documents and Settings\ql0adm>brconnect -u ql0adm/<pwd> -c -f stats -t ora
dict_stats
BR0801I BRCONNECT 7.00 (44)
BR0252E Function NetShareGetInfo() failed for 'sapmnt' at location BrEnvProcess-
89
BR0253E errno 2310: This shared resource does not exist.
BR0806I End of BRCONNECT processing: ceehwaio.log 2010-10-11 16.18.54
BR0280I BRCONNECT time stamp: 2010-10-11 16.18.54
BR0804I BRCONNECT terminated with errors

>
Ambarish annapureddy wrote:
> HI Volker,
>
> You are a champ.I dont have anyother words to express.
> The issue got resolved.We gave SAPEXE and SAPMNT.We faced issue when we used ops$ then i used system user and it went through.Before closing the thread i want to know how did you get the note.Thanks a ton again.
Sorry,
I did not come across this for a while
Well it was not such an obvious search as for your message, but just from my memory of
installing on MSCS and that there was something special to the brtools. So that knowlegde
in behind, my search was "MSCS brtools" -> two hits -> one bingo
Volker

How do you tell which build you are running?

Build?
Renee
"MODERN PROGRAMMING is deficient in elementary ways BECAUSE of problems INTRODUCED by MODERN PROGRAMMING." Me

Thanks for info
Regards
Enis,

Content Server - Which SQL statements are running?

Similar Messages

Maybe you are looking for