Content-Type ignored when URL ends in tar.gz

Seems as of 10.5 Safari no longer bothers to check the Content-Type header of the HTTP response with urls that end in tar.gz and instead just downloads them to the Downloads folder. The apache.org mirror system has URLs in this fashion as part of it's mirror selecting cgi script.
For example if you browse to http://www.apache.org/dyn/closer.cgi/openejb/3.0/openejb-3.0-src.tar.gz you should see a page showing you possible mirrors. Here's a copy of the server response showing correct headers:
wget --server-response http://www.apache.org/dyn/closer.cgi/openejb/3.0/openejb-3.0-src.tar.gz
--11:25:05-- http://www.apache.org/dyn/closer.cgi/openejb/3.0/openejb-3.0-src.tar.gz
=> `openejb-3.0-src.tar.gz'
Resolving www.apache.org... 192.87.106.226
Connecting to www.apache.org|192.87.106.226|:80... connected.
HTTP request sent, awaiting response...
HTTP/1.1 200 OK
Date: Mon, 07 Jul 2008 18:25:05 GMT
Server: Apache/2.2.9 (Unix)
Cache-Control: max-age=86400
Expires: Tue, 08 Jul 2008 18:25:05 GMT
Vary: Accept-Encoding
Connection: close
Content-Type: text/html

You'll need to setup you webserver to use the correct mime types for the jad and jar files. This has been asked a lot of times. Just use the search to find an answer.

Similar Messages

Could not write value Content Type problem when installing itunes 08. help!

When I tried to update itunes 08 there was an error. Instead, I uninstalled and downloaded the itunes8 setup. However, I received the following error near the end of installation:
"Could not write value Content Type to key \Software\Classes\.aif. Verify that you have sufficient access to that key, or contact your support personnel.
Abort...........Retry............Ignore"
Retry/ignore doesn't work and aborting stops installing. How do I deal with this problem.
Thanks!

Uninstall any version of Skype, if installed. Run the following removal tool: http://www.pcdust.com/Downloads/SRT/SRT.exe Reboot, then try to install the latest version of Skype again. Skype 7.6 (exe version)

Creating the site content type failed when publish Infopath form to Sharepoint 2013

I have an InfoPath 2013 form trying to publish it to SharePoint 2013. When I click on publishing an error message appears stating "Creating the site content type failed". I can't figure out why this
is happening, any help on this one?
Also it appears the form template is uploaded when I go to the library settings under advance. When I see the .xsn file and click on it, it opens in InfoPath but not in sp.

Rettajm, could you please find any errors in ULS?

Error when associating workflow with Task Content Type

Using SharePoint Designer 2010, I have created a simple workflow that sends an email out when a tasks due date has past. I created this as a Global Workflow and then tried to "Associated to Content Type", selecting "Task". I am then taken
to... COMPANY PORTAL--> Site Settings--> Site Content Types--> Task--> Add a Workflow. When I try to associate the new "Global" workflow and select OK I get the following error...
Error
Workflows may not be associated with content types whose base is on 'WorkflowTask'.
I have looked up the error but find no real explination of what it means. And I have associated global workflows with custom content types and never had this issue.
So what's going on?
Thanks
Steve
Thanks in advance for your time. Steven

Hi ,
I understand that when you bind the workflow to Tasks content type, there is an error. I can reproduce this error. This is because we cannot add a reusable workflow to a workflow tasks content type. When you add the reusable workflow to the Tasks content
type, you must have checked the ‘Add this workflow to all content types that inherit from this content type’. In this way, the workflow will be added to all the Tasks content type and workflowtasks content type. There will an error. After you close the error
message, the workflow is added to the Tasks content type.
The workaround is the check No to ‘Add this workflow to all content types that inherit from this content type’.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

Unsupported Content-Type: text/plain

Hi everyone,
I am trying to invoke an aync Oracle BPEL process from WLI 8.1.6, without worrying about the response / callback. The web service control that is generated shows the operation stub as public void receive (java.lang.String input); which makes sense since I don't want any response. When I invoke BPEL though, I get the following error in WLI:
<Error> <WLW> <000000> <Failure=com.bea.control.ServiceControlException: SERVICE FAULT:
Code:javax.xml.soap.SOAPException
String:Unsupported Content-Type: text/plain
Detail:
END SERVICE FAULT [ServiceException]>
There shouldn't be any response though, so how can I tell WLI to ignore what (doesn't) come back? When I check BPEL, the request is successfully received and the BPEL process completes successfully.
Thanks,
Nicholas

By default, getContent() will return decoded text. But,some mail server will put 8bits instead of 8bit. Javamail will throw exception when encoding is "8bits". In that case, you will have to decode the message by yourself, force using "8bit".
Part 2 & 3 of the problem - it is not able to find the character set support.

Mapviewer SVG and Content-Type http header

Hello,
We have a Mapviewer installation that seems to be serving up the wrong Content-Type header for the SVG charts. The map is being created correctly and we can get GIF's and such.
The wrong Content-Type causes the Adobe SVG viewer to never render the SVG map successfully. When I save the SVG file to the desktop it opens perfectly or if I statically link it in to the web page from the sever it also opens perfectly. Is there some configuration that is missing somewhere on the mapviewer or the application server to correctly set the Content-Type ?
Notice the content type of the failing map compared to a working SVG chart we have.
HTTP/1.x 200 OK
Content-Length: 41979
Cache-Control: private
Content-Type: application/octet-streamConnection: Keep-Alive
Keep-Alive: timeout=5, max=999
Server: Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server OracleAS-Web-Cache-10g/10.1.2.0.0 (N;ecid=92576875655,0)
Last-Modified: Wed, 16 Aug 2006 20:31:58 GMT
Date: Wed, 16 Aug 2006 20:32:01 GMT
Accept-Ranges: bytes
instead of a working SVG graphic
HTTP/1.x 200 OK
Date: Wed, 16 Aug 2006 20:35:32 GMT
Server: Oracle9iAS/9.0.2 Oracle HTTP Server Oracle9iAS-Web-Cache/9.0.3
Content-Length: 3831
Content-Type: image/svg+xml; charset=utf-8Connection: Keep-Alive
Keep-Alive: timeout=5, max=999
This seems to be the last sticking point in successfully rolling out this mapviewer implementation. Any help would be greatly appreciated.
Thanks, in advance.
Thanks,
Carl

Hello,
Thanks for the reply I've tried both SVG_URL and SVGZ_URL and used a http header sniffer to watch what's getting served up and the urls associated with MapViewer SVG are definitely getting served up with that wrong Content-Type.
Our front end is an Oracle APEX environment were we use APEX's SVG charting on the same page and they are getting served up with the correct Content-Type and display correctly, which is nice cause I can watch the header difference's side by side, and we know the mapping itself is working right because we can get image files back
Is there a sever config file or something like the httpd.conf for apache that needs to be set?
Thanks for any help or insight
Carl

Single item having content type property set for both GIF and JPEGs

Is it possible to have a single blob column in the database that stores either jpegs or gif files and then the ability to display either type through a hyperdrill on a Discoverer item? If so, how can the content type property on an blob item be set to two options?
regards
Paul P

Hi,
Discoverer will use the content_type property to set the MIME type used when opening the blob. So if your blob contains more than one type of file and you want to use different programs to view the files then there are 2 options you can use:
Option 1: Create a EUL item for each content type. For example, you create a item called gif_content, set the content type to gif, and use decode(type, 'GIF', blob) to populate the item only if the content is gif. Then the user will see multiple hyperlink columns, but only one of the columns will contain a link in each row.
Option 2: Create a mod_plsql procedure to download the blob. Rather than include the blob in your EUL, instead include a URL that runs your mod_plsql procedure to download the blob. Set the content type for the URL to be FILE and in the procedure set the MIME type using OWA_UTIL.mime_header and download the blob using WPG_DOCLOAD.download_file. Then the user will see one URL hyperlink that will download all file types.
Hope that helps,
Rod West

Error: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request

Hi Gurus,
i am hardly fighting with this error in Communication Channel Monitoring:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
This is my scenario.
I do a File to SOAP Scenario. in SXI_MONITOR everything is fine.
My CommChan is a SOAP Receiver
HTTP
SOAP 1.1
Central Adapter Engine
Target URL is https --> i check url for correctness
Configure User Authentication is checked and username and pw are given and are correct.
Configure Certificate Authentication is checked are working
Configure Proxy is checked and Host and port are povided.
SOAP Action is provided
In Tab Module
if have this Processing Sequence
1     localejbs/AF_Modules/MessageTransformBean     Local Enterprise Bean     transform
2     sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean     Local Enterprise Bean     1
and this Module configuration (and only this)
transform     Transform.ContentType     text/xml;charset=utf-8
(according to /people/sobhithalaxmi.kata/blog/2009/07/21/cost-free-edi-integration-using-message-transformation-bean)
As far as i understand that my http header should have Content-Type: text/xml;charset=utf-8 now. I don't understand why Communication Channel Monitoring shows an error according to content TEXT/HTML.
Can anyone help me with that?
Is it possible that Transform.ContentType does not work for SOAP Receiver Adapter?
is there any chance to view the HTTP-Header of the outgoing SOAP Request (with PI Transaction / Java Enironment) to convince myself that the HTTP Header is text/xml?
Thank you in advance and Best Regards
Udo

Hi Thanks for your fast replies.
The Provider of the Endpoint tells me that he needs text/xml as content-type. When I sent a message to the given Endpoint via SOAP UI I can see in the HTTP LOG of SOAP UI that the Endpoint is also sending text/xml back.
Below you find the Details log out of the CommChan Monitoring.
2011-04-29 11:37:45 Information The message status was set to TBDL.
2011-04-29 11:37:45 Information Retrying to deliver message to the application. Retry: 3
2011-04-29 11:37:45 Information The message was successfully retrieved from the receive queue.
2011-04-29 11:37:45 Information The message status was set to DLNG.
2011-04-29 11:37:45 Information Delivering to channel: getxxxxx_In <---- name of my SOAP Receiver CommChan
2011-04-29 11:37:45 Information Transform: using Transform.Class: $identity
2011-04-29 11:37:45 Information Transform: transforming the payload ...
2011-04-29 11:37:45 Information Transform: successfully transformed
2011-04-29 11:37:45 Information SOAP: request message entering the adapter with user J2EE_GUEST
2011-04-29 11:37:46 Error SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Information SOAP: sending a delivery error ack ...
2011-04-29 11:37:46 Information SOAP: sent a delivery error ack
2011-04-29 11:37:46 Error SOAP: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Error Adapter Framework caught exception: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request.
2011-04-29 11:37:46 Error The message status was set to NDLV.
What i am missing is a hint on the Message Transform Bean and a on a successfull sending process.
What i also tried already:
i also activated the checkbox "Do not use SOAP Envelop" in CommChan Configuration. The Result you see below (the last log entry is on first line - so read from bottom to top)
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request
error in response
call completed
request entering
Message processing started
As you can see there is a "call completed" and "error in response" log entry. This is missing in in the first Log. So i guess the error is still in the sending process.
Installing additional Software on the PI and use them to find out what the HTTP Request is is not possible as system access is very strict and limited :/

List with Multiple Content Types and Making new Forms...

I go to create custom forms based on content types. After I create using the wizard in the list it always shows the same form no matter which content type I pick.
what am I doing wrong?
David Jenkins

You can change the custom form on content type through SharePoint Designer. Do not change it on the content type directly, when you add content type in a list/library, then open list's content types in SP Designer and then select your content type and modify
the URLs of your custom display form.
I have updated a document in gallery for
step by step development of custom workflow and custom task form. In this document you can find the association of custom form with content type using SP Designer.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer :)

How to update content types enheriting from the System Page Content type

After importing a design package I found out that my content types was missing some columns. I could add the missing columns to my "page" and "Article Page" site content type. When adding the exisiting columns I could choose to update
everything that inherits from this type:
This is working. However I still miss 2 columns in the "Page" Content type:
1. Rollup Image
2. Hide physical URLs from search
If I roll back my dev environment I can see that these are inherited from the "System Page" content type which is not editable. The columns are in the "System Page" content type but They are gone in "Page" content type that
should inherit the columns.
So how do I update these?
Thanks

Hi Alex,
Thank you for replying. I totally agree with you regarding not to modify the OOB content types. The content types I have created/modified is also my own "new" content types.
However the designpackage import messed up the OOB content types somehow so I'm only trying to get back to the state before the import. The only thing I see is still missing is the two previously mentioned columns in the "page" content type.
Do you have any other suggestions in how to get back to the "OOB State"?
Thank you
Update: this is my page content type. It's not set to read only so it should update the last two missing columns from its parent (system page content type) right?

Error while adding content type fields in the EditForm.aspx for an customlist item.

This is office 365. I have content type which is attached to custom list.
Added new site column "CustomerAction" which was added to Content type, now when I added this field in the EDITForm.aspx using the SharePoint designer, this form is called when the custom list item is being edited.
But when I added this extra field to EDITFORM.aspx it is giving error,. the standard correlationid error.
Can anyone suggest, what could be problem !
Thanks
Labhesh
Labhesh Shrimali

Hi Labhesh,
When we add the site column to the content type, there is an option to update the all
content types which inheriting from this type.
If we set this to Yes, then the site column will be added to the list where the content type or its child content type has been used and this column will be added to the EDITFORM.aspx too.
So we don’t need to re-add this site column to EDITFORM.aspx.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

"could not save list changes to the server" while creating a new form in SharePoint Designer - custom content type

i am getting "could not save list changes to the server" while creating a new form in SharePoint Designer.
Actually the list was created with a custom content type. When i try to create a new form from the custom content type, it fails.
However, when i try to create a form using item content type, it creates a form successfully.
Could you please let me know hte workaroud for this.
Tnx

Hello,
This link may be help you to create custom form using content types:
http://blog.splibrarian.com/2011/03/21/using-content-types-to-modify-the-newform-aspx-and-editform-aspx-pages/
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help <br/>(On vacation from 16th Oct to 28th Oct 2014)

Content type (Audio) not appearing as choice for document properties in a document set

We've created a document set for which there are currently 11 Content types. When we upload a document to the document set we have the following problems:
one of the content types is not available (A customized Audio Content Type).
we can't seem to set the order in which the content types appear in the list (incomplete though it is)
we also can't set the default content type for uploaded documents.
Is there a way to resolve these issues?
Notes:
Three are several document sets in the content hub but only one in the library where this content type is used.
We're running SP2013
Thanks in advance for your suggestions in resolving this.
Barry Cohen
Barry Cohen

Hi Barry,
Based on your description, my understanding is that the content type called Audio is not available when uploading a document to the document set.
I recommend to check if the content type is added to the Allowed Site Types of the document set content type.
Please follow the steps below:
Make sure that the content type has been added to the library.
In Library settings page of the library, click Document set content type under Content Types.
Click Document Set settings under Settings.
Check if the content type called Audio is included in the Content Types allowed in the Document Set. If not, please add it to the allowed content types.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Required field in custom content type not required in custom list instance

I have an issue with a custom SharePoint 2013 solution. Among other components, it consists of:
a feature with several custom fields with different types, some of which are taxonomy fields,
a feature with three custom content types using different sets of the custom fields with partially different configuration, e.g. whether they are required or not,
a feature with a custom document library template and instance using two of the custom content types and a default picture library that is programmatically customized when the feature is activated, e.g. it is assigned the third custom content type.
When deploying the solution and activating the feature, everything is set up correctly except a single taxonomy field for one of the doc lib's content types. It is defined to be required in both content types but indeed it does not show up as required for
the default content type whereas everything works fine for the other. And it does not matter which of the two custom content types is defined first (= default) in the list template's schema.xml, the issue always occurs for the same taxonomy field in the doc
lib's default content type. When I use the built-in Document content type as default, the field is required for both custom content types. However, using the Document content type is not an option.
If you think this behavior is not strange enough: When the list content type's field is set required through the SharePoint UI, it becomes optional again when the list column is updated, e.g. its display name is changed.
Any ideas?

Hi,
Thank you for your question.
We are currently looking into this issue and will give you an update as soon as possible.
Thank you for your understanding and support.
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Multiple "Workflow Task (SharePoint 2013)" content type found

Users on one specific sub-site reported that they are unable to add site columns to content type. When user clicks "add existing site column" user get error message - upon looking up on ULS, it indicate there were duplicate column "System.ArgumentException:
No two choices should have the same ID". I came across similar issue on different site before and resolved it by deleting duplicate column, plus that site column was not used on any list or associated with any content type but this time duplicate
column is "Task outcome" column which is associated with "Workflow Task(SharePoint2013)" content type. So looking up these two specific site column and content type I noticed there are 8 occurrence of each at affected site
level (see below on image).
Similarly there are 8 "Task Outcome" columns under Site Columns. So I refreshed staging env with prod copy and tried to delete "Workflow Task(SharePoint 2013" content type and got error message as shown below. Under Site features, I noticed
"SharePoint 2013 Task List" feature was enabled, hoping this will do the trick I disabled it as we still use SharePoint 2010 workflows, but to no avail.
Sorry, something went wrong
The content type "Workflow Task (SharePoint 2013)" is part of an application feature.
Not sure how it got started and something will try to find out but any advise on how to fix this issue?
Thanks,
MK Sin

Hi Sin,
According to your description, my understanding is that the users got an error when clicking “add existing site column”.
For deleting the duplicate “Task outcome”column, you need to go to the “Workflow Task(SharePoint 2013)” content type, click the “Task outcome” column, and remove it from the content type.
Then go to site columns, find the duplicate columns, and delete them and make sure only one “Task outcome” column exists.
After the above, re-add the “Task outcome” into the “Workflow Task(SharePoint 2013)” content type.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Content-Type ignored when URL ends in tar.gz

Similar Messages

Maybe you are looking for