Continuously playing music changing pages

I have created a website with Muse, great program!
I also have created a html embedded player and put it on the stramien page, thinking the player should be continuously playing when scrolling throug the website!
But when I change the page the player restart with its song!
How can I change this?
Greetings from Holland

There are few ideas you can use :
- Open the player in a pop-up window which should play audio continuously with different page navigation.
- Use frames, main frame for page and small frame for audio player
- Create single page site with scroll and anchors for different section of page, so that you don't have to open separate pages.
But if you want to continue with current setup , then you can try the suggestions mentioned here :
http://stackoverflow.com/questions/18479191/how-do-soundcloud-keep-music-playing-on-when-n avigating
http://stackoverflow.com/questions/15612120/how-do-i-make-an-audio-file-play-continuously- on-all-pages
Thanks,
Sanjit

Similar Messages

  • PDF video continues playing after leaving page

    Hi all,
    When I publish a video as a PDF, it plays through Adobe smoothly. However, when I click on a hyperlink within the PDF video linking to Youtube or somewhere externally, the PDF video keeps playing causing 2 audio stream overlapping.
    Is there a way to pause the Captivate PDF video after leaving the page to watch a Youtube video via hyperlink?
    Thanks in advance!

    Use an FLYPlayback component to stream the video and when you are about to leave the frame execute its stop() method

  • Itunes 11.1.3 goes unresponsive when but continues playing music since update

    After updating to iTunes 11.1.3 the player continues to go unresponsive.  Music and app itself continues to update and move like it is working, however none of the buttons function and itunes cannot be closed without force closing it.  This is new since the recent update.  On many occasions clicking anywhere no the app creates the system error sounds, and presents the spining rainbow wheel.  I am running the newest version of OSX 10.9 and it is completely up to date, on a macbook pro 13inch early 2011.  Any idea why this is occuring?

    Team,
    Can someone help here ?
    Thanks,
    Varun

  • My iTunes used to continue playing when i opened lid, now no more, pls help?

    itunes used to continue playing music once lid was opened, now not,..any help on thise would be appreciated?

    Portables that will not Power on.
    http://support.apple.com/kb/TS1365
    http://support.apple.com/kb/TS1713
    Go step by step.
    Note: Steps 5 and 6
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Reset SMC, hold the keys down for 20 seconds or more.
    Shut the computer down and try to start it 12 hours later.
    Best.

  • Spotify on iPhone continues playing after removing output device (f.e. headphone, airplay speaker)

    I like Spotify and the built-in playlists a lot! But since one of the last version, I annoys me from time to time. Hope you can fix this! Common situation: I stream music at home from Spotify App on iPhone to an airplay speaker. When leaving home and losing the connection to the airplay speaker, Spotify automatically stopped playing in former versions which was great and common to other music apps on the iPhone! Now, since one of the last updates, Spotify continues playing, f.e. on the iphone speaker, when the former speaker is no longer available, f.e. headphone or airplay speaker. Meaning, it continues playing in your pocket when leaving home. Other music apps stop playing when you remove the audio output. Which is the known and wanted behaviour on iOS. Another fancy thing:1. Stream music to an airplay speaker2. Plug in headphone, music continues on the headphone3. Remove headphone, music continues on the airplay speaker4. Remove airplay speaker or leave the network, music continues playing on the iPhone speaker Ugh. :/ The Apple Music App on iPhone for example stops playing when losing the output device (airplay, headphones, ...).It might be a feature in the Spotify App to keep music running but please offer a setting to keep iPhone standard to stop when removing speakers. Moreover, and this is really annoying, this new feature makes Spotify to continue playing even if the playlist has not been synchronised for offline playback. Means, it automatically eats your included cellular traffic when you leave your WiFi. :((( Could you please fix this? Or add a setting to not continue playing music on any output device radically? THANKS!

    This is really annoying me. Any solutions, Spotify?

  • How do I change the settings on my ipod so that it plays continuous music.  Right now, it plays the same song over and over, even if I select the shuffle icon.  It used to show the continuous play icon, it doesn't anymore.

    How do I change the settings on my ipod so that it plays continuous music.  Right now, it plays the same song over and over, even if I select the shuffle icon.  It used to show the continuous play icon, it doesn't anymore.

    Right click on a movie(in iTunes), and click "get info" then go to album artwork and add the artwork that you want...
    -Messymeese

  • I want to play music from my playlist when I am using slideshow of my pictures in Ipad,  but I can only choose ONE SINGLE song, and it continuously repeates itself.  Is there a way to play the complete playlist while showing my pictures?

    I want to play music from my playlist when I am using slideshow of my pictures in Ipad,  but I can only choose ONE SINGLE song, and it continuously repeates itself.  Is there a way to play the complete playlist while showing my pictures?

    You can start the playlist playing in the iPod app and then switch into the Photos app and start your (non-music) slideshow - as you've found out you can currently only select a single track in the Photos app. Whether that will change in iOS 5 I don't know, but you could try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

  • Recently can't play music samples on Amazon France and Germany via their usual 'Listen to all' button. Can only play samples individually. Message says roughly RealPlayer not installed on my naigator, but I've changed nothing and have RealPlayer on my PC

    Recently can't play music samples on Amazon France (and Germany, though they've now gone over to Flash, which seems to have fixed it after (re)installing Flash Player) via their usual 'Listen to all' button. Can only play samples individually. Message says roughly RealPlayer not installed on my navigator (see box below), but I've changed nothing and have always had RealPlayer on my PC at least. The 'Aid' page is useless in that it does not provide any links to sites from which one could download whatever it is Amazon Fr thinks one now needs.
    == URL of affected sites ==
    http://www.amazon.fr (e.g. http://www.amazon.fr/Je-Souviens-Tout-Juliette-Greco/dp/B001PU6T04/ref=sr_1_1?ie=UTF8&s=music&qid=1277978559&sr=1-1)

    Hello Neil.
    It has been reported by other uses that RealPlayer is having some compatibility problems with Firefox. I believe this is mostly notorious with RealPlayer Plugin Record Plugin, but it may be the same thing here. Please contact RealPlayer developers for support.

  • Unity Connection transfer to external number plays music on hold continuously.

    We found an issue when transfer external calls out of Unity Connection (9.0 and 9.1) that the Music on Hold continuously plays and never connects the call.  
    The outgoing calls are going out SIP.  The call does get placed and does connect to the external number but it is promptly dropped as the transfer does not complete.  The calling party only hears hold music.
    Through testing we found that this only happens when the call goes out SIP.  We also found that the issue is resolved when changing the Transfer Rules from Release to Switch to Supervise Transfer.  
    Would we need to change each User's Transfer Rules to Supervise Transfer or is there another way to release the transfer?  Is this a bug?

    Hi Jennifer,
    Your issue seems to be as below.
    Problem 2. Call is Connected and then Disconnected
    The call is connected and then it is disconnected. The call transfer is successful when an internal extension initiates the call whereas the call fails, if the calling side is from PSTN.
    Call Flow
    PSTN>H323 GW>CUCM>Unity Connection Call Handler (Any Caller Input - Transfer to Alternate Contact Number)>External Number or CTI RP with CFA to External Number.
    Core Issue/Call Flow Analysis
    Here is an analysis of the call flow and the common problem for a failed call transfer:
    The First call leg is a H323 Fast Start, from the Gateway to the CUCM. CUC receives the call and transfers the call back to CUCM. CUCM in turn places the first call on hold and initiates a new call to the PSTN.
    The second call leg is a H323 Slow start. Finally, when the call is answered, the CUCM or the Gateway does not send H245 capabilities. This causes a timeout and the call is disconnected.
    Solution
    By default, Wait for Far End H.245 Terminal Capability Set (TCS) check box is checked. As a result, CUCM expects the far-end H.245 TCS before it sends its H.245 TCS. If this checkbox is unchecked, CUCM must initiate capabilities exchange.
    In order to resolve this problem:
    Uncheck the Wait for Far End H.245 Terminal Capability Set (TCS) check box.
    Or
    Make a change on the gateway so that the gateway initiates capabilities exchange.
    Enter these commands in order to configure a change required on the gateway.
    conf t
        voice service voip
       h323
              h225 start-h245 on-connect
            exit
    Thanks,
    Nishant

  • HT1399 Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

    Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

    I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming.  So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on.  But the ipad is a different story.  I have the music and artist but not one playlist  I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this. 
    Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
    I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z.  Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac.  Which I do talk highly of all the time.  But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
    I have managed to get the Imac to fix this but for some reason the IOS devices do not.   Any ideas?
    Thanks Al

  • Playing music the screen freezes and if i want to make changes it will not let me.I go to restore factory settings and afterwards i am able to listen,view album covers,and change the type of music i want.Is there a better way to do this? Thx

    When playing music on my ipad the screen freezes and i am not able to view album covers or make any changes i am only able to hear what i selected.
    This is the third time it has happened since i updated to the new IOS 5.1. It never happened before.
    If i go to Summary and restore the ipad to the factory settings then i'm able to run it as normal.
    Is this a glitch in the new software,or a problem with my ipad?
    Thanks for any help

    Thanks Russ H and Ross H!
    I'm finding Multicam, combined with Compound Clips to be extrememly efficient.
    I started with 2 different video clips, along with 2 different audio clips.
    Layed out both clips side by side (visually, they are on top of each other on the timeline),and made that a single compound clip.
    Then I laid out both audio clips on top of each other on the timeline and made those a compound clip.
    So now I have
    2 original individual Video shots
    1 compound video shot of the 2 above side by side.
    2 original audio tracks
    1 compound audio track
    Next I made a multicam track, and added to it all 3 video shots (2 original + 1 compound) And I added the compound audio track. I set that audio track to be "the" track.
    It's just a little bit of setup, but really not that bad, and the ability to use the multicam feature to switch between shots, while keeping everything in sync is fantastic!
    - Jack

  • I cannot play music from my library on either my external drive or my laptop - keep getting same message "___ song (all of them) could not be used because the original file could not be found. I have tried changing the path in prefernces many times.

    I cannot play music from my libray on either my external drive or my laptop. I keep getting the same message - "___ song (all of them) could not be used because the original file could not be found. Would you like to locate it?" I have changed the path several times under preferences and it still won't recognize any songs from either my laptop hard drive or my external drive. I can't play any music at all.

    I think I've fixed this on my machine.  If you look in the ITunes folder there is a subfolder called Previous iTunes Libraries.  In my case for some reason this contained the one which had always worked and a new one was in the main  folder.  I closed iTunes, deleted the new one, and moved the old one back to the main folder, then opened iTunes.  It then rebuilt the library and it plays correctly.  Hope it works for you.

  • I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2)

    I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2) this happens with other music apps too. Please I need help!

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists. If it doesn't work, there isn;t much anyone here can do for you. It may be a physical problem with your speakers.

  • Audio from youtube video continues playing after i have left the page. please help. thanks

    im pretty new to mac and not sure if this is the norm or not but want to know how to turn it off if possible. if im watching a video on youtube and i click back or the youtube icon to go back to the home page the audio continues playing from the video. this stops when i playing another video or close the tab. not sure if its a setting somewhere that i cant find or some sort of glitch. thanks

    1. System Preferences >  Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
    2. Safari > Preferences > Privacy
        Press the button “ Remove All Website Data”.
    3. Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        "Develop" menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.

  • Why do my speakers not play music? I know they work because when I go I change my ringtone all the sounds play. I am not a very happy costumer right now and would like an answer to my problem. Thanks.

    Why do my speakers not play music? I know they work because when I go I change my ringtone all the sounds play. I am not a very happy costumer right now and would like an answer to my problem. Thanks.

    What happens when you play music? Do the hardware volume controls work when using the Music app?

Maybe you are looking for