Unable to get lightroom 2.7 to see new printer profile

I installed a new printer profile from ilford into my windows 7 system.  Photoshop cs3 shows it in the profiles, but lightroom only has my canon printer papers.  I am runing 64 bit mode.
Bart

Dorin,
Thanks a lot.  I didn't look in the pane but was jumping into the print itself.  The only thing strange now is that the new profile is not listed unless I check the "include display profiles".  The profile is installed as a ".icc" .  Is this correct?  Anyway I think you have solved my problem which was just me not looking in the right place.  Many thanks.
Bart
P.S. I should check as problem solved, but wanted you to answer the profile question if you can and didn't know if you would get this otherwise.

Similar Messages

  • I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled.  I got it to work one time on another network but not at home where I use Lightr

    I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled.  I got it to work one time on another network but not at home where I use Lightroom.

    Hi,
    could you please give us some info on what kind of network you have?
    Can other application communicate with the web?
    Thanks,
    Ignacio

  • Unable to sign up/enter prinder code for new printer?

    Unable to access eprintcenter.com to sign up & enter printer code for my new printer??

    Hello,
    It may be that you have a SnapFish.com account. Alot of long time customers of HP have SnapFish.com accounts and do not realize it. One of the printer software releases signed customers up automatically, and most people did not know, or forgot, because they never used it. Try going to SnapFish.com and using the forgot password link at the log in screen there. Once you have the password reset, go to ePrintCenter.com and use the SnapFish.com log in information to log in. If that does not help you may need to contact SnapFish.com directly to have them delete the account, or use a different email to register with.
    If you are getting an error message, let me know the error and I will see what I can find on it.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Unable to access time machine backups after creating new user profile

    Hi,
    I had visited the Genius Bar with some problems with iTunes not opening. The Genius had indicated that I likely had some corrupt files and that the easiest fix would be to create a new user profile... So we did...
    After transferring all my data over to the new profile and setting everything back up as I like I deleted the old (presumably corrupt) user profile. To my dismay I no longer have access to any of my time machine backups that were created prior to setting up my new user profile... They appear to still all be there. However, I am unable to select any of the dates prior to the new user profile's creation and the deletion of the old profile...
    Please help...
    Thank in advance,
    Des

    desbiss wrote:
    After transferring all my data over to the new profile and setting everything back up as I like I deleted the old (presumably corrupt) user profile. To my dismay I no longer have access to any of my time machine backups that were created prior to setting up my new user profile... They appear to still all be there. However, I am unable to select any of the dates prior to the new user profile's creation and the deletion of the old profile...
    That's correct. What you see in Time Machine's "Star Wars" display depends on what you have the Finder window set to. While looking at the new profile, you can't see any backups that were done before it existed.
    You're right, they're still there, for now, but are grayed-out in the timeline at the right, because what's in the Finder window wasn't backed-up then.
    If you select your internal HD or Computer Name in the sidebar, you'll be able to see those backups.
    But since they're for a different user, you won't be able to view inside that home folder or restore from it -- one user, even an Admin user, doesn't normally have access to a different user's data.
    It's doubtful, but you might be able to create a new user with exactly the same name as the one you deleted, log on to it, and see if the old backups appear.

  • Tired of getting On-Screen Message about aligning new print cartridges​.

    Hello, 
    I have an hp Deskjet 5440 Printer. Every few minutes I'm getting the message (on the monitor screen): "If you have just installed a new print cartridge it is recommended that you align it. Click on "Align" to align your new print cartridge."
    I use generic ink cartridges which the printer does not recognize so I never go through the alignment process.  I did not like using the alignment process even before I started  using generic cartridges because it seemed to be a waste of paper, ink, and time. So, whether I'm using generic or hp cartridges I'm getting the message - over & over & over. It really takes the fun out of using my computer. Can anyone tell me how to stop these #$%^* messages?
    Thank you,
    Bakwtr

    The way to stop the alignment messages is to complete the alignment process.  Regardless whether the cartridges are new or refilled the alignment process should be done. In addition to the alignment (necessary for best print quality, you may not care) the process also sets the correct operating energy for the printheads. This is important to get the best quality and also life from the cartridges.  The amount of ink used in the alignment is tiny, particularly compared to the ink that may be wasted if the printer is not using the correct printhead energy (and temperature).
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

    Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

    Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
    http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

  • Mac can't see new printer-told to Disable Airport Extreme Firewall and Mac Filtering...

    I have a new Epson WF-3520 AIO printer. I run Mac on OS X 10.5.7.  The printer appears to be properly set up to run wirelessly but it doesn't show up as a choice to be added to my list of available printers.  My Mac just doesn't see it.  After trying many things Epson's tech support told me to call Apple and find out how to disable the Airport Extreme's firewall as well as Mac Filtering.  I went into the Airport's utility and just got lost in knowing exactly what steps I need to take to do this.  Also, I'm somewhat dubious that this is really what needs to be done in the first place and I'm wondering if he simply wanted to get off the phone....  All advice welcome!  Thanks. Stephanie

    Forget it.... My suspicion was correct.  I was talking to an idiot.  Problem resolved by me.  Unrelated to Airport.
    Forgot to install a piece of software... duh!!!

  • Just got W 8.1 & IE 11. Have Lightroom 5.3  some of my printer profiles are gone on Epson 2880

    I recently bought a new computer with Windows 8.1 & Internet Explorer 11. My Lightroom 5.3 printer paper & color space profiles are gone

    John,
    In the case of the R800, 3.0 has been around for about one year. However, 3.09 was first posted to Epson Europe on 29 October 07 and 6 November 07 to Epson Oceania (Australia and New Zealand). The driver is supposed to be fully compatible with Leopard, but I have no way of checking. According to both Europe and Oceania, drivers for the remaining R series printers (1800, 1900 and 2400) are due out later this month.

  • Unable to install lightroom 3.6 error code 2753

    Had issues with my computer today (windows 7 64 bit) finally was able to get a restore point that would allow the machine to access windows and all the programs (including Photoshop CS5) were functional except lightroom 3.6. I was not able to have the windows un-installer remove lightroom so I had to go and do it manually. I downloaded another copy from Adobe. When I try to install I get the error code 2753. The file Lightroom.exe is not marked for installation. I checked the FAQ's and there was only one reference to that code but it refered to lightroom 2.0 software installation. I re-installed lightroom 2.6 with no problems and I tried installing the 3.6 software after installing the 2.6 version. I had no luck still receive the 2753 error code.  When I initially installed the 3.6 version on 12/4 there were not issues and the software worked with no problems. Any ideas / suggestions? Thank you.

    Hello Jeff, Thanks for the reply. What had occured was when I was working inside of Lightroom one of those balloon messages popped up making note of a hardware driver not working or missing, I really did not pay attention to be honest I thought it may have had something to do with the download of files off of the compact flash card. After downloading the files into lightroom I turned off the machine. Later on when I came back to work on the files the machine would not boot up into windows 7 instead a sort of chkdsk utility initiated, after it finished checking the disk I was given the option of going to a previous restore point, the first time it did not work. On the second try with a different restore point selected I was able to bring up windows. Everything was working except for the lightroom software. After running Registry Reviver and also optimizing the registry I still was unable to get lightroom to work.
    I decided to download another copy and re-install. Well the first trouble encountered was not being able to un-install the software from the control panel utility so I tried installing the software without the old software being removed, that is the first time I received the 2753 error code. I checked adobe.com FAQ page and the only mention about this code was in reference to the 2.X version. I tried the procedures there anyway. Still no success with the error code 2753 still coming up. I then decided to remove the software manually from the computer (only in windows, did not go through DOS or to regedit). I again ran Registry Reviver software  and tried installing the software again with no success still.
    Finally I decided to google the error code 2753 and review what was actually happening. Part of the instructions to clear the code required me to download some software that microsoft created (msicuu2) that would force the removal of the lightroom software from my machine (it was still showing up in the control panel un-install eventhough I removed it from the program file in windows). I again ran Registry Reviver and Optimized the registry, re-booted the machine gave it another try and this time I had success.
    I am happy to report that Lightroom is working without any problems. I cannot say with any certainty what caused the problem initially for all I know it could be just a case of SH's syndrome.
    I took note in your reply about the stability issue, I will pay more attention for now to see if there is a re-occurrence of this or a similar problem and then address it at that time. I would like to mention that I did not loose any photo files or have any files corrupted due to this problem........ so I am thinking more a windows problem as you alluded to in your reply than it being a Lightroom problem.

  • UK ATV 2 Unable to get Dolby Digital 5.1

    I have just replaced my Popcorn Hour with the new ATV2 as I was impressed with the form factor and the simple UI. However, I have been unable to get my Surround processor to see DD5.1 on the optical audio connection. I have seen a few comments on this forum about resetting but I have still not managed to get it to work...
    Should I be able to get DD5.1 when viewing HD trailers? Or are there any (possibly free) ATV 2 compatible audio/video tests I can download to test ?
    Thanks in advance,

    If I try this, for me it doesn't seem to work.
    To be more precise: What I do is transcoding my DVDs using Handbrake, using the "High PRofie", and then adjusting the audio tracks typically as follows:
    - track 1: english 5.1 --> encoder: AAC --> mixdown: Dolby  Pro Logic II;
    - track 2: english 5.1 --> encoder: AC3 Passthru --> mixdown: AC3 Passthru;
    - track 3: german 5.1 --> encoder: AAC --> mixdown: Dolby  Pro Logic II;
    - track 4: german 5.1 --> encoder: AC3 Passthru --> mixdown: AC3 Passthru;
    Now what I get is four language tracks when playing in iTunes or QuickTime: the two Dolby tracks are enabled and show up as "stereo" (ok, I guess from what I understand how Dolby Pro Logic works) and the two surround tracks grayed out (probably since there is no 5.1 system attached to my mac).
    However, when I play the file from my ATV2 it shows only two language tracvks (one German and one English) and from the sound qiuality it is definitely the "pseudo-5.1" coming from the stereo tracks mixed down as Dolby Pro Logic II.
    So I still do not know what to do to play "real" 5.1 sound via my ATV from ripped DVDs.

  • Unable to connect to HP Officejet Pro 8100 wireless printer: Unsuccesful Network Connection

    Unable to set up the wireless on my new printer.
    Error message:  Unsuccessful Network Connection.
    The printer was unable to install over the network.
    I have printed the diagnostic report (HP Network Configuaration Page).  There are no error comments on this page. 
    Under Wireless title, my correct WIFI isted under Network Name; however the status says disconnected.
    Under Diagnostic Results title; Connectivty - Connected - PASS
    Wireless - ON
    Wireless Working  - PASS
    Signal - Very Good
    I connected the USB cable as instructed in the wizard.  Does it have something to do with when to disconnect this cable?

    Hi,
    You dont have to fiddle around with the wireless channel and calling your isp and all, i install these every day to my customers, when i get any issues i follow these three methods, one of them works
    HP Printer Wireless Setup
    HP Automatic Wireless Configuration or (HP Auto Wireless Connect)  HP printer Wireless Setup, includes Auto Wireless Connect technology that allows connecting the printer to the wireless network automatically without having to connect any cables or enter wireless network settings such as wireless password or id. All new HP printers will have this capability during the software installation process. In some cases computers or the network configurations are compatible with HP Auto Wireless Connect. In these cases, an alternate wireless setup method will be offered. To be compatible with HP Auto Wireless Connect, the following conditions must be met: Your computer uses Windows Vista, Windows 7, Windows 8, Mac OS X 10.5 +. Your computer uses a wireless connection to your network and the operating system is in control of the wireless adapter so that the HP Software can retrieve the computer’s current network settings. Your computer is connected to your 802.11b/g/n wireless router over a 2.4 GHz connection.
    NOTE: HP Printers are currently not compatible with 802.11n 5.0 GHz networks.Your computer does not use a static static IP address. Your printer is in HP Auto Wireless Connect mode. The printer will be in this mode for one hour after it is first powered on during installation before it is connected to a network. If your printer has been powered on for more than one hour and the software has not yet tried to connect the printer to your wireless network, you can reset this mode by using the Restore Network Defaults option from the printer control panel. Refer to your printer documentation for how to perform Restore Network Defaults. Other environmental and technical factors may also affect whether HP Auto Wireless Connect is offered.
    If HP Auto Wireless Connect is offered during the installation of your printer, it is the recommended setup method. Part of the setup process requires your computer to be temporarily disconnected from your wireless network. During this time you will not have Internet access. Be sure to save any online work and/or downloads before continuing with this setup method. To use this option, install the software for your printer and follow the onscreen instructions. When prompted, select the “Network (Ethernet/Wireless)” connection type and then choose “Yes, send my wireless settings to the printer (recommended)”. That’s it! The HP software will do the rest. If HP Auto Wireless Connect is not offered during the software installation or if it is not successful, you will be guided to use another wireless setup method.WPS (Wi-Fi Protected Setup)WPS (Wi-Fi Protected Setup) – WPS has two modes to connect devices together over a wireless connection. One is called “pushbutton” and the other is called “PIN”. Pushbutton is by far the easiest method. We will describe how to connect using the WPS pushbutton method, but not the PIN method.
    For instructions on starting WPS on your printer consult your printer’s manual. However there are some conditions that need to be met in order to use WPS pushbutton mode:
    Both your printer and wireless router must support WPS pushbutton mode. Consult your printer and wireless router manuals. The wireless router must have a physical WPS pushbutton available. Your network must use WPA or WPA2 security. Most WPS wireless routers will not connect using the WPS method if WEP or no security is used.  Most WPS wireless routers will not connect using the WPS method if you are using the manufacturer’s default for the network name and no security.
    To connect your wireless printer to your wireless router using WPS. Start the WPS pushbutton mode on your printer. For instructions on starting WPS on your printer, consult your printer’s manual. Within 2 minutes, press the WPS button on your router.HP Printer Wireless Setup – The Wireless Setup WizardThe Wireless Setup Wizard, which you run from the printer’s control panel. Make sure you know your network name and your security password (WEP or WPA). On the printer’s control panel, press the Setup button and then select the Network menu. The Wireless Setup Wizard displays a list of wireless networks in the area. Note:  The Setup button may appear as a wrench icon. There are differences between product models. Select your wireless network’s name from the list. If you don’t see your wireless network listed, you can enter your network name manually by scrolling to the bottom of the list. If you enter the name manually it must be exact, including upper and lower case characters. Enter your WEP key or WPA passphrase. You must enter the key or passphrase exactly, including upper and lower case characters. Your printer should connect to your wireless network. If it does not connect, you are given the opportunity to print a Wireless Network Test report that will help you find out what may be wrong.USB Setup of WirelessUSB setup of wireless – Some HP wireless printers can use this wireless setup method during the printer software installation. During this process you’ll temporarily connect a USB cable between the computer and the printer. It’s important that you connect and disconnect the cable only when prompted by the software, which will guide you through connecting and configuring your printer’s wireless connection. In some cases the software may automatically find your wireless settings for you.To connect your wireless printer to your wireless router using USB setup of wireless, proceed to Installing Printer Software.
    Source:- http://hpprinter.techport45.com/hp-printer-wireless-setup/

  • Lightroom new download doesn't recognise my special printer profile

    I loved every second on the beta version of LIGHTROOM and happily used a special printer profile for Canon Pixma MP950.
    Now,I downloaded the new Lightroom and it doesn't recognize or accept my profile. Instead it uses a generic BJ Color Printer Profile 2000 or the profile for Canon MP 950(which I didn't like).
    The difference seems to be that previously I was able to select "colorsync" under "colorsync" during setup. Now the only option is "standard". If I choose "none" under "Color Correction" , the program chooses "BJ Color Printer Profile 2000". If I choose "Colorsync" the program gives me the "Canon MP950 PR!" profile.
    Could you ,please. advice me how to proceed. I was so satisfied with the beta and so disappointed with the new download.

    Okay, I have successfully printed a test page frm the printer itself. It did work correctly with my PC and connected to the PC network that I had previously set up, so I'm pretty sure that ther printer itself is good in terms of being able to print and also it's network capabilities. I also double checked the network password that I entered when I connected the printer to the time capsule network and it said that it did set up a connection point correctly. After I did this I tried to print something from the mac again and it simply isn't bringing up the printer details as already there, or when I try to add a new printer.
    So now I'm at a brick wall and have no idea how to get through / over / round it. Please help anyone.

  • Apple TV doesn't see new streamed content

    I've always had issues with getting the Apple TV to see new content that I've added to iTunes. I have a large library (much larger than the 160 GB option) so I have the Apple TV linked to my Mac Mini. Until recently, every time I added a show or movie to iTunes, I'd have to relaunch iTunes in order for the item to show up on the Apple TV. Inconvenient, but do-able.
    Starting at some point recently, the Apple TV will not see new content. I can reset iTunes, reset the computer, even reset the Apple TV, all to no avail. The only thing that has worked so far is to unlink the Mini and then re-link it. Everything then has to be reconnected, resynced, etc. Obviously this is not acceptable on a regular basis.
    Does anyone know how to force the Apple TV to update the list of media?
    Thanks in advance.

    forcing a Syncing works for me...
    from the menu *File > Sync +<your appleTV's name>+*
    OR
    click on the appleTV under devices and press Sync button in the lower right hand corner of the iTunes window.
    some things like metadata (movie ratings R, PG, G..) take time to be picked up by the appleTV but usually restarting the appleTV fixes this i.e. press and hold menu + down button until light blinks amber, then select language and resolution then select restart
    if sync isn't doing it you might have some bigger problems and restoring from factory (can be found in the menu above where you pressed restart), then re-upgrade might get rid of any cruft that might have done something nasty to you appleTV.
    sync should do it though...

  • I am unable to get same preview image colors in Bridge and Lightroom

    I am unable to get same file preview in Bridge and Lightroom. The Lightroom preview image (in both the Library and Develop) is more de-saturated. But the exported/saved jpegs match. If I try to match the Lightroom preview image to the Bridge preview image, the resulting Lightroom  export colors are off. I have tried this with images with no changes and with changes and the result is the same. I have Lightroom 5.6 and CR 8.6. I am using the latest version of Bridge.
    I contacted Adobe support and followed all instructions to try to fix but the problem remains. This comment was made after several solutions were tried, including updating Lightroom. :
    Adobe: there would be little difference in case of preview of Bridge CC and Lightroom 5. However, after exporting it would be same. Both use different technology at the background and work in a different way. The preview which you see in lightroom is not the actual image but incase of Bridge you see the actual image ( original ). That's the reason there is a color variation between previews.
    Me: But how can I then use the Lightroom preview to get accurate colors when processing a RAW file? If I do adjustments to the RAW file in Lightroom it looks different when exported. That doesn't seem to make sense when Lightroom is designed for photograhy
    Adobe: Please check in develop module of lightroom.
    Me: Nothing changes in the develop mode. The image looks the same as in the preview/Library mode.
    This screenshot shows the unmodified images in Develop (Lightroom) and ACR (Bridge). The color differences are significant.
    Lightroom exported jpeg file, unmodified from preview image in Develop (which looks like Bridge preview image not the Lightroom preview)
    Bridge saved jpeg file, unmodified from preview image in ACR
    Any suggestions on what I need to do to Lightroom to make it show accurate colors. If not, I don't see any point in using it to process files.
    Thanks, Marie

    Bridge is just a browser. It displays according to the embedded color profile but assumes sRGB for all untagged images.
    In Lightroom library previews use Adobe RGB and in Develop the working space is Pro Photo RGB.
    The real question is why use both Bridge and Lightroom. Stick to one, not both.

  • Lightroom 5.6 would not open. I only get a flash picture then I get an error message. See below message: [Window Title] Adobe Photoshop Lightroom 64-bit [Main Instruction] Adobe Photoshop Lightroom 64-bit does not work more [Content] there was a problem m

    Lightroom 5.6 would not open. I only get a flash picture then I get an error message. See below message: [Window Title] Adobe Photoshop Lightroom 64-bit [Main Instruction] Adobe Photoshop Lightroom 64-bit does not work more [Content] there was a problem making the program no longer work properly. The program is closed and there is a notification if a solution is available.

    I may have just solved my own problem. Right after posting this I googled bezel lightroom and found this: Flickr: Discussing The word 'bezel' appears in the taskbar. in Adobe Lightroom
    I changed the setting in the view menu and now everything appears to be working fine. I cannot explain why it stopped working before because I hadn't made any previous changes to the view options.
    Still am curious about the memory usage, though.

Maybe you are looking for