Contract report contains table veda and vdap

Hi Gurus,
I am stuck in a contract report where i need to use table veda and vbap.
selection screen contains
contract document no
contract start date
contract end date
material no
since veda table is dynamic table which changes when you create or delete entries in veda table therefore join is not possible.
please help
thanks

got answered.

Similar Messages

Help needed for report on tables vbak and vbap

Hello,
I needed help in one of my work issues, this is my first project and Iam still learning. kindly help.
I was asked to take erdat,vbeln,posnr from selection screen and compare it with the data already in tables vbap,vbak. If the data
already exists and exception needs to be raised saying that the 'data exists',but if the data is not present in the tables the
tables have to be updated. This has to be done using function module only.
Then I have to write a REPORT calling the above function module and finally displaying the number of records updated and the
list of them.
I have started writing a function module:
FUNCTION z_tableupdate.
""Local Interface:
*" IMPORTING
*"     VALUE(DATE) LIKE VBAK-ERDAT DEFAULT SY-DATUM
*"     VALUE(SALESORDERNO) LIKE VBAK-VBELN
*"     VALUE(ITEMNO) LIKE VBAP-POSNR
*" EXPORTING
*"     VALUE(EX_VBAP) LIKE VBAP STRUCTURE VBAP
*"     VALUE(SYS) LIKE SY-SYSID
*"     VALUE(EX_VBAK) LIKE VBAK STRUCTURE VBAK
*" EXCEPTIONS
*"      DATA_UPDATED
*"      DATA_EXISTS
SELECT * FROM vbak INTO vbak_wa WHERE erdat = date
                                    AND vbeln = salesorderno.
ENDSELECT.
SELECT * FROM vbap INTO vbap_wa WHERE posnr = itemno.
ENDSELECT.
IF sy-subrc EQ 0.
    ex_vbap = vbap_wa.
    ex_vbak = vbak_wa.
ELSE.
    RAISE data_exists.
ENDIF.
sys = sy-sysid.
ENDFUNCTION.
How is the above code for function module, will this work??
Now can I write a report to call the above function module and update the record?? if so, how to update ??? please help...Lots of thanks in advance.

Hi
Welcome to SDN forum
Whay can't you write a simple report in SE38.
why you are using Fun module
Nothing wrong in it.
But first become perfetc in reports in SE38 and then do using the fun modules
write a simple select statement like
SELECT AVBELN AERDAT BPOSNR BMATNR
INTO TABLE ITAB
FROM VBAK AS A JOIN VBAP ON
AVBELN = BVBELN
WHERE A~VBELN IN S_VBELN AND
             A~ERDAT IN S_ERDAT AND
             B~POSNR IN S_POSNR.
IF SY-SUBRC <> O.
WRITE: / 'No data found'.
ENDIF.
First write this in SE38 by defining a proper selection screen and internal tables
then do as fun module
see the doc for fun module
Function Modules;
Check this matter.
Function Modules are Global ABAP programs created by SAP for reusable purpose.they have IMPORT,EXPORT and TABLE parameters, and EXCEPTIONS to through when error occurs.
You can create them from TCode SE37.
Go through the following doc:
Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.
Function Module Interfaces
The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:
Syntax
... [IMPORTING parameters]
[EXPORTING parameters]
[CHANGING parameters]
[TABLES table_parameters]
[{RAISING|EXCEPTIONS} exc1 exc2 ...]
The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.
Interface parameters
The interface parameters are defined on the relevant tab pages in the Function Builder.
IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.
EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for 'pass by value' is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.
CHANGING parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.
TABLES parameters are table parameters. Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
Exceptions
The exception of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception are defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.
The addition RAISING is used to declare class-based exceptions that can be propagated from the function module to the caller. Exceptions in the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be explicitly declared, otherwise a propagation can lead to an interface violation. A violation of the interface leads to the treatable exception CX_SY_NO_HANDLER. Exceptions of the category CX_NO_CHECK are implicitly always declared. The declaration of exceptions of the category CX_STATIC_CHECK is statically checked in the syntax check. For exceptions of the category CX_DYNAMIC_CHECK, the check is not performed until runtime. In a function module in which class-based exceptions are declared with the RAISING addition, the statement CATCH SYSTEM-EXCEPTIONS cannot be used. Instead, the relevant treatable exceptions should be handled in a TRY control structure.
The addition EXCEPTIONS is used to define a list of non-class-based exceptions that can be triggered in the function module using the statements RAISE or MESSAGE RAISING. Exceptions defined in this way - as with formal parameters - are bound to the function module and cannot be propagated. If an exception of this type is triggered in a function module, and no return value has been assigned to it with the homonymous addition EXCEPTIONS of the CALL FUNCTION statement when the call was made, this leads to a runtime error.
Note
For new developments after release 6.10, SAP recommends that you work with class-based exceptions that are independent of the function module.
RFC is a technology which is used to access a functions (Modules) from
the remote systems.
If a function module is set as remote enabled which can be access from
the remote system via RFC.Eg: U can access the Remote enabled function modules in ur VB,Webdynpro,Java,Visual composer program.
A function module can be set as remote enabled by SE37->Go to ur FM->click the option Button "remote enabled".
But Normal function modules can not accessd from the remote system.
Good Example for RFC enabled function module is : BAPI(Business Application Programming Interface)
Note: All BAPIs are Remote enabled but not all remote enabled function modules are BAPI.
CALLING A FUNCTION MODULE:
1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"
--> Write the Corresponding FM name --> Hit Enter
2)The appropriate import ,export Parameters will be displayed in ur editor
3)Pass the Values Here.
Also check these links.
http://www.geocities.com/victorav15/sapr3/abapfun.html
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
See the following links:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
Regards
Anji

Report for daily production and daily sales

Can you any body Please let me know which fields we should pick to create custom report containing production qty and sales qty day wise for each material

Hi Veesh,
Whats the scenario you using there? i mean to ask
Discrete
REM
or
PP-PI
Thanks & Regards,
Abu Arbab

What is a table containing sales order and the contract it refers to

Hi,
I have a following problem (ECC6.0):
A sales order is created in VA03 and referenced to a contract. I need to locate the table or tables (or FM) which contains the information of the sales order number and the contract number.
Problem with VA03 is that I can see both numbers in the document flow screen; i.e. sales order (Doc.no) is xxxxx and the Preced.Doc field contains the contract number. However, this is only an ALV view. I cannot get anywhere from the program SAPMV75F.
I have checked table VBAK and it contains most of dat but not the link itself as it has any sales document. I need to have an entry containing the link between a given sales order (+item) and the contract.
Instead of creating with "Create with reference" and select Contract (which you need to refer to), the system is defined so that contract is used with a hierarchy customer. Debugging of creating did not help as the linking was conducted in the background without activation of debugging screen. I'm not an SD and no experience with contract.
Help is highly appreciated,
Pipsa

Hi,
The field VBAK-GUEBG is used for valid from and valid to date,
you can find the Preceding and Subsequent sales and distribution document under table 'VBFA'.
under SMOD, you can find below exit use for Contract data modification:
V45W0001 Function module exit for copying sales header data into
items.
This enhancement contains the user exit:
- EXIT_SAPLV45W_001
regards
Vivek.
Edited by: Vievk Vardhan on Jan 29, 2010 3:13 PM

Change item level field (in table VEDA) in Contract (VA41)

Hi freinds,
I am creating a Contract (VA41) & I want to change the value of "Contract validity period" (VEDA-VLAUFZ) in item level.
Anyone know any exit to do that ?
I have tried user exits in MV45AFZZ, but there was no appropriate one where I could change this value.
Enhancement V45W0001 also doesnt work for me.
Thanks & Regards,
Alin

Hi Liju
Have you tried using MV45AFZZ: userexit_move_field_to_vbak or userexit_move_field_to_vbap. I guess here both VEDA and XVEDA are available.
I couldnt try myself as contract data doesnt get populated in our system.
Kind Regards
Eswar

Report to display total and detail from table GLT0 and FBL3N

hi guys,
we have the requirement to show a report with total amount per GL account from table GLT0 and to as well display the detail from tcode FBL3N ..
shall i use normal report via SE38, if yes, what is the table that stores detail from FBL3N or does report painter support the above requirement..pls advice

use report SAPF070 as sample
(compare documentation!)
hope that helps
Andreas

Asigning Reports, specific tables and Url links to the Role

Hello Gurus,
could you please tell me the procedure of asigning Reports, specific tables and Url links in the role.actually i know the process of assigning T-Codes to the role but i dont know the procedure for reports and url links and tables...
i hope u people will respond positively.
Cheers.......
srinivas.korva

Hi Srinivas,
"i want to add only one particular table not all tables", you can do this using a Custom Transaction Code, the following are the steps to do it:
1) goto se93, give a unique name, say zxxx
2)Enter SE16 into the transaction field and select the flag the skip initial screen field:
3)On the lower portion of the screen, enter the following information:
Name of screen field: DATABROWSE-TABLENAME
Value: Enter the name of the table you want to browse with
4)save it.
5) Now add the transaction zxxx in th role, and assign it to the user.
With this, when user executes the transaction, he/she will be able to see only the perticular table you added.
"in PFCG what is the use of Exper mode for profile generation. what is the difference between general profile generation and expert mode profile generation".
Expert mode has 3 options:
1) Delete and recreate profile and authorizations---This will completely delete the old profile and add only the new once.
2) Edit old status----It will edit the old values
3) Read old status and merge with new data----This will add the new values aithout actually disturbing the old ones.
Hope it helps.
Please award points if it is useful.
Thanks & Regards,
Santosh

Table contain user name and tcode

Dear Experts,
Can you tell me which Table contained user name and tcode field?
Thanks and Best regards,
wilson

You need to be even more carefull with parameter transactions.
If SU24 is not maintained for them, PFCG will pull the proposals from the core transaction (via which the parameters are used in the skip screen feature...). If the core transaction has authority proposals for S_TCODE, then you will get those tcodes and their proposals as well.
A carefull choice of menu objects (not only limited to Tcodes), taking heed of SU24 defaults and tuning it to meet your needs is the key. But it requires organizational discipline and good training, otherwise rather dont use it for anything other than important objects which you want to control manually only, even if your business roles are a mess.
You can also restrict the authorizations of the security admins for example (as unpopular as that may sound... to segregate authorization concept development (SU24 etc), role building development (PFCG etc) and user administration (SU01 etc). Object S_USER_TCD also has a field called TCD...
There are also other objects (as Dipanjan has pointed out) which have TCD as a field of an object which is not S_TCODE. In addition to I_TCODE, Q_TCODE, P_TCODE, see also S_IDOCMONI for example.
To be honest I have given up on trying to find them all
The easiest solution is to use the menu and maintain SU24 when the transaction is configured or the application is developed and tested. That is what SAP does as well in SU22. It is more work upfront, but more sustainable in the long run.
If your users (and auditors) only see the menu (and use the SUIM --> Executable transactions) options, then you can get away with it in the short or even medium term. Latest when someone else need to maintain the roles they will hate it...
My 2 cents,
Julius

View Customization Table changes and Data table base changes in a report

Hi All,
How to view Customization Table changes and DAta table base changes in a report ,
Is it right transactions: SCU3 or RSVTPROT
Also plz let me know the concept of audit trial,
Thanks
SD

Hi,
Changes to master data objects must be captured for the For compliance purposes. The auditor allows you to be able to view and print an audit log of changes to master data objects for a chosen period. It is very common for external auditors to focus on what has changed from one year or quarter to the next to help determine the nature, extent, and population for testing. To configure and access your audit log, perform the actions listed with each of the following utilities.
Audit Trail is used to track the record changes.
The report RPUAUD00 gives all the changes done to the masterdata by any user anytime.
But, before using this audit trial, please ensure that the system hardware is well equipped as the audit trials activation would later become a performance issue as this would occupy a lot of space in the coming time.
Best Regards,
Venkat.

Printing a Table Control AND ALV grid from same report

Hello,
I am trying to figure out how to print the output of my report, which consist of a table control and a OO-driven ALV grid under it. i tried several possibilities but I only get the ALV in my spool....?
Answers will be rewarded !

Keep a break point in that method. Press print in the ALV, check it stops in the break point. If yes then you can use write statement, the values what ever u r writing it come in the print-out. If the control doesn't stop in the break point then there is some problem in the method declartion.
Check my code - I written every thing in the global declaration.
                      ALV Class Definition
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS:
        handle_top_of_list
            FOR EVENT print_top_of_list OF cl_gui_alv_grid,
        handle_end_of_list
            FOR EVENT print_end_of_list OF cl_gui_alv_grid.
ENDCLASS.                    "lcl_event_receiver DEFINITION
DATA: o_event_receiver   TYPE REF TO lcl_event_receiver.
                      ALV Class Implementation
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_top_of_list.
    DATA: lws_top1(20) TYPE c,
          lws_top2(150) TYPE c,
          lws_top3(150) TYPE c,
          lws_len_file TYPE i,
          lws_file(80) TYPE c,
          lws_file1(100) TYPE c,
          lws_file2(100) TYPE c,
          lws_file3(100) TYPE c.
    WRITE: / text-001.
*Date
    CONCATENATE text-008 ws_date INTO lws_top1 SEPARATED BY space.
    WRITE : /1 lws_top1.
Source File Name
    WRITE: / text-009.
    lws_len_file = STRLEN( p_upload ).
    IF lws_len_file < 80.
      MOVE p_upload TO lws_top2.
      WRITE : /1 lws_top2.
    ELSE.
      MOVE p_upload TO lws_file.
      MOVE p_upload+80(48) TO lws_file1.
      DO.
        IF lws_file+79(1) EQ '\'.
          EXIT.
        ELSE.
          CONCATENATE lws_file+79(1) lws_file2 INTO lws_file2.
          SHIFT lws_file RIGHT.
        ENDIF.
      ENDDO.
      IF lws_file2 IS INITIAL.
        MOVE lws_file TO lws_top2.
        WRITE : /1 lws_top2.
        WRITE : /1 lws_file1.
      ELSE.
        CONDENSE lws_file.
        MOVE lws_file TO lws_top2.
        WRITE : /1 lws_top2.
        CONCATENATE lws_file2 lws_file1 INTO lws_file3.
        WRITE : /1 lws_file3.
      ENDIF.
    ENDIF.
ENDMETHOD.                           "handle_top_of_list
ENDCLASS.                    "lcl_event_receiver IMPLEMENTATION
Regards,
Prakash.

No save and no copy/paste of reports containing charts ??

Hello,
is it correct that there is really no option to save generated reports containing charts (bar / pie) to e.g. the html-format ? Or at least to select the graphic, press "CTRL-C" and in another application (e.g. Word or Excel) "CTRL-V" ?
This generally normal functionality seems really to be missed and is really important for us. Is there anybody out there who can help on this topic ?
Thank you very much in advance.
Best regards
Olav

Create a new account, name it "test" and see how your apps work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
Open System Preferences >> Accounts >> "+" make it an admin account.
If the problem is present in the test account also, then it is systemwide. In this case try repairing this with the 10.5.5 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
If the problem does not appear in the test account try starting in "Safe Mode" (It will take a bit more time to startup because it runs a directory check first).
If that works go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If there are still problems, go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving /Users/Home)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
Let us know.
-mj

Table containing 'Valid From' and 'Valid To' dates -- tcode SU01

Hi All,
I want to know the Table containing 'Valid From' and 'Valid To' dates -- In tcode SU01 ---Tab Logon Data there are 'Valid From' and 'Valid To' dates. I want to know the table(s) where this info is stored.
thanks
Naved

Looks like you have two userids. Login to SDN using your userid that created the post and assign the points. If you don't see the radio button then change your original post to a question.
Message was edited by: Prakash Singh

Does table MCHB (batch stocks) contain both valuated and non valuated stock

Hello
Does table MCHB (batch stocks) contain both valuated and non valuated stock?
Is it possible that material has both valuated and non valuated stock for the same plant and storage location?
Thanks

Hi ,
Most of your queries has been answered by Jurgen.
1)Does valuated or non valuated is linked with valuation type? yes ..if the material is valuated then only there is valuation type.It is used for split valuation .
2)Where can I see whether material is valuated on plant or not?
to check the valuation level IMG >Enterprise Structure>Definition>Logistics - General>Define valuation level
and to check value and quantity updation at plant level check
IMG >Logistics - General>Material Master>Basic Settings>Material Types-->Define Attributes of Material Types
3)Case1
I want material A to be valuated at the plant without split valuation
Case
I want material B to have 0 value at plant
go as Jurgen has recommanded in the previous post . for material B used different material type which is not valuated at that plant .
Regards,
Anupam

What are lot transaction register report source tables and views?

I have a request to create a custome report duplicating all the fields in the standard "lot transaction register" report in EBS 12.1.1. How can I find all the tables and views used in this report or any standard report for that matter?

You can either download the report from the server and open it using Reports Builder 10g on your client and get the code. Or, enable trace and generate the tkprof file for this concurrent program and get the object names.
Thanks,
Hussein

CRM Table containing IBase GUID and Product GUID

Hi experts,
Could you please give me the table containing IBase GUID and Product GUID.
My requirement is to bring the Warranties in the Ibase relationship tab in IB52 transaction. Warranties should be corresponding
to product(Material) corresponding to the IBase.
Regards,
Deepthi

Hi ,
My problem is resolved by using COM_TA_R3_ID table.
Here R3IDENT field will give the product_id of the IBASE and R3MAT_ID will give the product id of the basic material.
By using FM CRM_IBASE_COMP_GET_DETAIL in the field obect_id we will get product id of IBASE .
Then passing that to R3IDENT field we will get basic product guid from R3MAT_ID field.
then from comm_product table we will get GUID of basic material
Regards,
Deepthi

Contract report contains table veda and vdap

Similar Messages

Maybe you are looking for