Control center stuck on loading

I've just build a new PC using the MSI Z87-GD65 Gaming Mobo and i7-4770k CPU.
I'm running Win 8.1. For some reason, when I launch Control Center, it just sits on the Loading popup..... nothing happens...
Also I have to hold the Power Button down to get a firm boot, if I just press power button.. it seems to start then gets stuck in a power up/down loop.....

Recently i've found the solution to this problem. Go to Settings, General, Reset and choose Reset network settings. And bingo!

Similar Messages

ATI Catalyst Control Center is not loading with the latest drivers. Help!!!

I have installed latest ATI drivers from Lenovo 8.712. After that ATI Catalyst Control Center is not loading. The icon is present, when I click display properties. But when I click it, nothing happens. How can I downgrade to the previous version?
And another question: I have a docking station and 2 monitors. One of the monitors with DVI connection is working fine. Is there any way to disable laptop screen and enable second monitor through analog D-SUB.
Thank you in advance.

Let me add. Already tried everything: battery is switched to High Performance, Windows XP service pack 3, T500

Game center stuck on loading mode

Game Center is stuck on loading mode. Bought Jenga app and now can't play app because Game Center won't load.

Recently i've found the solution to this problem. Go to Settings, General, Reset and choose Reset network settings. And bingo!

Game Center Stuck At Loading Screen.

I go on bike race and it pops up game center.I try to sign in but it just has a loading sign and does nothing else.Also i cant cancel the game center screen.I have also gone on the gamecenter app and it is just stuck at loading.I have 5 bar internet connection and i recently accesed game center 5 days ago.

Have you tried terminating the app?? both game centre and the bike racer? - not just pressing the home button?
If that doesn't work try turning the phone off and on again.

Brother Control Center 4 not loading

Hi,
I've just recently purchased a Brother MFC-J6510DW inkjet printer and I'm struggling to get the Control Center to open once installed.
I'm operating on Windows 7 64 Bit. Once the installation is finished, I can see the icons for Control Center 4 (CC4), yet when I try to open it, nothing happens! This is after attempting to run as administrator, updating the software from Brother (although
I literally bought the printer this week so the CD should be up to date).
The other thing is that my girlfriend, who is also operating Windows 7 64, has installed CC4 and it works fine. This makes me think there might be something up with my computer?
If it helps:
Samsung Series 7 Chronos, Intel Core i7 Processor, 8GB Memory
Any help would be very much appreciated as I'm struggling to get much out of Brother!
Cheers,
Adam.

*.RRA Files are created by InstallShield. These are files that are created in the Program Directory when the file that the
installation is trying to replace is locked. The file will be created with the first four letters of the real file name, followed by 4 random numbers and letters, followed by an extension of RRA. For example, if TBMAIN.EXE is in use at the time
of the installation, a file named TBMA9F0B.RRA may be created in the program directory (or some other combination of letters and numbers following the "TBMA" portion of the file name). InstallShield will also place an entry in the Windows Registry to
tell the computer to replace the locked file on the next reboot. Once the file is replaced by the RRA file, the RRA file will be removed.
The above was found on the internet. I had never encountered a .rra file before.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Game Center stuck on loading screen?

Not sure when it happened but the Game Center App on my iPhone 4s is stuck loading and loading on screen. I noticed it a couple days ago and thought it would get fixed or whatever but nope, guess not. Tried searching the internet if anyone else had been experiencing this problem but it seem only a few posts are out there so I'm not sure if it's my iPhone that's causing this problem or the GC app itself. Also, I accomplished an acheivment during this time so Is it possible that the acheivment caused the problem?

Recently i've found the solution to this problem. Go to Settings, General, Reset and choose Reset network settings. And bingo!

HT4314 GAME CENTER STUCK ON LOADING SCREEN HELP PLZ

Hi everyone, my game center has been stuck on the 'loading' screen for about a week now and I am annoyed because I cant see my friends Highscores or play multiplayer online. Please help. I dont know what to do because all the gamecenter problem solutions require me to be in the game center, and I cant get there seeing as it is still loading after a week of waiting. Does anyone know what I can do? I need your help ASAP please......

Have you tried a reset?
Hold the Sleep and Home button down until you see the Apple logo.

Loading flat files located on a server using the Control Center piece ofOWB

Loading flat files from a server with OWB
I am successful loading files with OWB, as long as they resided on my workstation in the C:\ drive. I copied the files to a Linux server into directories owned by Oracle/oinstall, permissions on the directories containing the files are 777. I ran the OWB client from the server with the following results:
Error
RPE-01013: SQL Loader reported error condition, number 1.
SQL*Loader: Release 10.2.0.1.0 - Production on Fri Mar 9 11:15:58 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader-500: Unable to open file (/u00/data/owb_repos1/state_codes.csv)
SQL*Loader-553: file not found
SQL*Loader-509: System error: The system cannot find the file specified.
SQL*Loader: Release 10.2.0.1.0 - Production on Fri Mar 9 11:15:58 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader-500: Unable to open file (/u00/data/owb_repos1/state_codes.csv)
SQL*Loader-553: file not found
SQL*Loader-509: System error: The system cannot find the file specified.
I tried to load the file using the control center from both the windows client and the server client. Can I do this from either one?
I can't import the file in the Design Center from the /u00/data/owb_repos1 directory, it does not show up.
If anyone has received similiar errors from OWB, please tell me how I can fix this. THANKS!!!
[d97886@owbtest owb_repos1]$ pwd
/u00/data/owb_repos1
[d97886@owbtest owb_repos1]$ ls -la
total 24
drwxrwxrwx 2 oracle oinstall 4096 Mar 19 12:14 .
drwxrwxrwx 18 oracle oinstall 4096 Mar 6 16:41 ..
-rwxrwxrwx 1 oracle garrett 1481 Mar 8 07:32 state_codes.csv
[d97886@owbtest owb_repos1]$

Hi
This is what i do for my flat files (i am loading my tables from the flat files):
1) Create location for the files in OWB and it should look something like \\path_to_where_the_files_are. Here you should be able to browse to your Linux box and select the location of the files.
2) Then check whatever you use (i use TOAD) and you should see in owb schema a directory created there which points to the location of the flat file.
3) then just follow the guide to sample the files etc and you are good to go.
Basically OWB has to be able to see the files that are on Linux machine.
Alternatively you can map your Linux share to your windows box (use samba or something) and use it that way.
Sorry if it is stating the obvious.
Hope this helps
Kind Regards
Vix

Project Server 2010 - Project Center is stuck on loading

Hello,
I have a new installation of project server 2010. When I go to the pwa site and click on project center it is stuck on loading (see print screen)
Any Idea?
Thanks

Hi,
Please connect to IIS manager
In IIS, expand sites click on SharePoint Web Service
In the right hand side panel, double click on compression
Uncheck Dynamic compression and static compression and click on apply
Repeat the steps for PWA web application site
Hrishi Deshpande – Senior Consultant DeltaBahn
Blog | < |
LinkedIn
Please click Mark As Answer; if a post solves your problem or Vote As Helpful; if a post has been useful to you

HT5858 My notification center and control center are stuck

My notification center and control center are stuck grey and black even if i change the wallpaper. I restarted my iPod but its still stuck how do i fix this!!

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Catalyst Control Center: Host Application has stopped working (Error)

Hi, I have anHP Envy 14-1110nr Notebook PC, with Windows 7 64-bit, and Catalyst Control Center (To configure switchable graphics) doesn't work. I believe to be stuck on my low performance GPU,and can't switch. I cannot load anything to do with my switchable graphics, and am at a loss for what to do (I'm a very inexperienced computer user). I have browsed other forums related to this but am scared that I'll destroy my computer by downloading the wrong thing. This all started after I got a virus that caused me to need to reset my computer from an earlier stage, please help.

Hi,
Try using Recovery Manager to reinstall your AMD Graphics Driver - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP DV7 6135dx. Can't install ATI Catalyst Control Center. Need help!

Hi! Have laptop HP DV7-6135dx. Windows 7 x64 Ultimate. I can't install Catalyst Control Center.I see in "Hardware" Mobile Intel(R) HD Graphics and Radeon (TM) HD 6490M like video adapters. Both this cards look like drivers installed completely.
I'm trying to install CCC to have choice to select one or another card.I've download all video drivers for this laptop model.I've try to install:1. AMD High-Definition Graphics Driver 8.830.6.2000 Rev. Oct 5, 20142. AMD High-Definition Graphics Driver 8.882.2.3000 Jul 31, 20143. Reference driver 12-10_mobility_vista_win7_win8_64_dd_ccc_whql_net44. Autodetect ATI Driver Software and it was install some driver.Always i have error message "Application Install:install package error" and installation process interrupted. I've try to fully uninstall all video drivers and install them from beginign, have try to clean system and registry by CCleaner, i think i've try everything but can't install CCC. It's always stuck with error.This is log ATI CCC screen Before i have install new Windows 7 i have seen on previous Windows 7 Catalyst....I don't know why i can install it. Can you help me please?

, Hello and thanks for posting on the HP support forums. If you are downloading this from the AMD site it may not work. The video chipset is built by AMD Radeon however it is propriatary. Unless you download the software for the system from the notebooks support site it may not work. As well you have to check to see if that notebook was released or was given windows 7 as an os. Here is the link to the support page. HP Pavilion dv7-6135dx Entertainment Notebook PC - Software and Drivers If your system came with it pre- loaded then you can do a system recovery to get it back. You will have to back up all your data before this. HP PCs - Performing an HP system recovery (Windows 7) Please let me know how things go. Thanks again for posting and have a great day.

Control center

Hello,
we were migrating application from OWB10gR1 to OWB10R2. Imported the design repository using MDL loader. After that upgraded the Runtime Repository using Control Center upgrade Assistant. Using this moved the runtime audit data from existing Runtime Repository to new control center. After that we need to upgrade all Locations ( locations should be in Valid status) to Control Center.
Most of the Locations were upgraded to Control Center but some locations were failed. I tried through Control Center Upgrade Assistant and OMB PLUS code.
It was giving error:
Failed to upgrade location
exception follows:-
java.sql.SQLException: ORA-01017: invalid username/password; logon denied
Installed components are at version level (null which is different from version of Control Center (10.2.0.1.31)
to fix these error it gave button to Upgrade. I pressed that button. even though it was not upgrading to Control Center.
If anybody faced this situation please advise me.
Thanks
Santi

I have already used this assistant to migrate the repository from 9.2 to 10, but I got a lot of errors for the locations. The assistant migrate correctly only a few of them, the others I had to configure or register again in the new version of OWB. After doing it, I didn't get more errors.

ATI Radeon HD 4870 - Bootcamp & Catalyst Control Center

Hey all,
I installed Bootcamp (Vista 64-bit) 5 min ago and noticed that Catalyst Control Center was not there. When installing Bootcamp on my MacBook Pro I got the Nvidia panel, why is not the CCC available on the Mac Pro?

I have posted a message "White screen of death and computer halts with ATI 4870 in Boot Camp"
I bought the 4870 and ANYTHING I do causes the system to halt and go to a white screen before even attempts to go into windows.
I have called Mac AND gone to a shop. I took the NVIDIA out of my MAc Pro and put in the 4870 and works GREAT in Mac but as soon as hold down the Option key to get the option to select Mac or Windows it halts system when push Windows before even attempts to load Windows.
I went so far as to take ALL hard disks out of system but a new one and put a Vists dvd in drive and try to install it.... Also tried Windows 7 and xp. NONE work... as soon as click the dvd the system halts. So this supposed upgrade just doesn't work.
I haven't found anyone with the same problem which is odd...
Any advice I would love it. Otherwise I need to return it.
The MAc shop said it wasn't their problem. Mac just guarantees works on MAc OS and maybe someday will support bootcamp. Really bad answer.

Control Center not getting started

Hi All,
I have installed oracle business intelligence 10g release 2 on a linux box. I have installed Oracle Warehouse builder on both linux box and on my laptop which is windows.
I tried to start the control center from the server which is the linux box. before that i ran the service_doctor.sql.
It gave the following output.
All PL/SQL packages and functions are valid
Platform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is not available
There is a problem accessing the service startup script from the databaseserver
Here is the detailed error message which contains the name of the startscript file:-
Service startup file 'null/owb/bin/unix/run_service.sh' is notaccessible from the database server on instance number 1
Please verify that the disk containing the file is visible to thedatabase server
Please verify that the database server account has access rights on thefile
Connection information stored within the repository is correct
PL/SQL procedure successfully completed.
can any one help me to sove this issue. It will be really nice if u can help me out.
Regards
Natesh

By now you have probably found your answer but I wanted to relay my solution for other readers. Had the same problem. Downloaded owbcollect.sql from Oracle. Indicated that client needed utl_file_dir=* in init.ora file. Also indicated that <OWBHOME> was not identified in column SERVER_SIDE_HOME in table WB_RT_SERVICE_NODES. Once I added the utl_file_dir entry in the init.ora file and updated wb_rt_service_nodes with the correct owbhome, service_doctor ran successfully and the control center starts automatically. Need to be careful, even though Oracle indicates setting utl_file_dir=*, this can be a security risk/hazard. Could potentially allow users to overwrite sys or datafiles.
Message was edited by:
brad liston
Message was edited by:
brad liston

Control center stuck on loading

Similar Messages

Maybe you are looking for