Control of 96 switches independently with a 2d Boolean array

I have an application that I need to change the state of individual switches in a 2d Boolean array.
Does anyone have a simple solution???

Replace Array Subset.

Similar Messages

Switch-independent load-balancing NIC teaming on server-side and MAC/ARP flapping on L2/L3 switches

Since active deployment of Windows Server 2012, our servers support team began to utilize new feature - switch-independent load-balancing NIC teaming. At first look it seems great - no additional network configuration is required and load balancing is performed by server itself by sending frames in round-robin or some hash algorithm out from different NICs (say two for simplicity) but with same MAC address. Theoretical bandwith is now grown up to 2Gbps (if we have two 1G NICs per server) against failover NIC teaming configuration, when one of two adapters is always down.
But how does this affect (if does) switching and routing performance of network equipment? From point of view of L2 switch - it has to rewrite its CAM table each time a server sends frame from different NIC. Isn't it expensive operation? Won't it affect switching in a bad way? We see in our logs that same server make switches to change mac-to-port associations several times per second.
Well, and how does it affect routing, if the switch to which server is connected is L3 switch an performs routing for the subnet server connected to? Will CEF operate well if ARP entry chages several times per second?
Thank you.

Since nobody answered here, we created service request and got the following answer (in short):
L2 MAC flapping between ports is very bad and you must avoid such configurations as much as possible. There is one possible variant that can be considered in your situation - use port-channel (either L2 or L3), in this configuration port-channel will be treted as single port and there won't be flapping.
Conversation example is here: https://ramazancan.wordpress.com/tag/best-practice/

Dynamic(Switch Independent) NIC Teaming Mode Problem

Hi,
We are using Switch Independent Dynamic distribution NIC Teaming configuration on Hyper-V 2012 R2 cluster. In the following graphs between 19:48 - 19:58 you can see clearly how dynamic NIC teaming mode badly affected the web servers response times.
We have encountered this problem on the different cluster nodes that use different NIC chipsets Intel or Broadcom and configured with dynamic NIC teaming for VM Network connection.
If we change the teaming mode as Hyper-V Port or remove NIC teaming for VM network as you can see from the graphic, response times are back to normal.
Any ideas?
Regards

Hi,
In the heavy inbound and outbound network load, If you are using the “Switch Dependent”
mode, you must configure your switch have the same teaming support mode.
There have two scenario.
“Switch Dependent” with LACP if your switch supports the aka 802.1ax.
“Switch Dependent” mode with Static.
Example of Cisco® switch configuration when you using the “Switch Dependent” mode with “Static” mode:
CiscoSwitch(config)# int port-channel1
CiscoSwitch(config-if)# description NIC team for Windows Server 2012
CiscoSwitch(config-if)# int gi0/23
CiscoSwitch(config-if)# channel-group 1 mode on
CiscoSwitch(config-if)# int gi0/24
CiscoSwitch(config-if)# channel-group 1 mode on
CiscoSwitch(config)# port-channel load-balance src-dst-ip
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Controlling solid state switches

Hello,
I appreciate your help in advance.
I'm designing an a protection system for small electrical network.I'm trying to open and close solid state switches based on voltage and current measurements.
I will collect my measurements with 9205, my questions are:
1- Which one do u recommend for solid state switching 9375 with digital output or 9485 with external DC supply, given that the switch that i'm using accepts control signal from 4-32 VDC and maximum current is 25mA.
2- It is written in Ni 9375 manual that the digital output is based on the supply voltage, please clarify and what's the relation and how to select the supply voltage?.
3- If i intalled 9205 and 9485 or 9375 on chassis 9174 (4 slots) will it work properly without problems?

Have you tried anything yet? SSR's are pretty simple devices.
Look at the datasheet for the source and relays, specifically the voltage and current specs of each one. As long as the relays need less power than the source can supply, it'll be fine.
I would wire in an e-stop if a loss of PC control can make the system unsafe. Watchdog timers can do this as well, but an e-stop is always a good idea with big-power stuff.

I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now her password won't allow her into my computer, even though it says it's her account. Is there any way to bypass the password screen?

I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now the password that she used on her computer isn't working on this computer. Is there any logical reason why the two passwords would be different, if I restored her information from a Time Machine backup? Aditionally, Is there a way to bypass the password page on startup to make a password that my mom knows?

If Disk Warrior does not work you can try the following steps (but they may not work if the disk has a hardware error).
Get the disk (DVD or CD) that came with the system (since you have it listed as 10.6.8). If it is 10.7 or 10.8 use the Recovery partition to boot from or the USB installer if you have that option.
Insert the disk then power down
HOLDING the C key, power up to boot from the disc.
Get to Disk Utility
If Disk Utility will now show your hard drive, use DU to REPAIR the disk.
When it completes the Repair process successfully as indicated in DU, do a shut down. If Repair is not successful then an different course of action is indicated below.
Then HOLDING THE APPLE (or Command key depending on your keyboard) KEY AND THE OPTION KEY AND THE LETTER P AND R KEYS, continue hiolding them until you hear the chime tone for the THIRD time then release all four keys.
If REPAIR is not successful, use the Install disc as a boot and REINSTALL THE OS X OPERATING SYSTEM DO NOT ERASE THE DISK OR VOLUME FIRST. REPEAT DO NOT erase the disk or volume before trying to reinstall the OS X operating system. After re-installing the OS do a software update. Note that ERASING the disk is NOT required to do an OS re-install. This allows your existing data and application files to remain.
If that fails then you are down to the "bitter end" of erasing the volume and reinstalling the OS and then all the other software.
If erasing the Volume fails then your last hope is to completely erase the entire hard drive, repartion the disk and try a re-install.
If that fasils then you may have a defective hard disk.

How to control a MacBook Pro remotely with ARD?

I have ARD set up and installed, but I'm not sure how to set up a connection with the MBP so I can control and observe the MBP with ARD.
Looking for a easy tutorial for a beginner in ARD.

Hi apple is awesome,
Just to check, you have one computer, with ARD installed, and your trying to use that computer to control your "BMP"?
If so:
On your BMP, you would want to setup sharing:
go to the white menu bar at the top of the screen
click on the Apple Menu
chose "System Preferences..."
when System Preferences opens, click the "Show All" button
click on the "Sharing" icon
if the lock in the bottom left corner of the window is locked, then click on it to unlock sharing
At the top of the window there will be a field labeled "Computer Name:" make sure your computer has a name you'll recognize.
Check "Remote Management"
Click on the words "Remote Management
If "Allow Access for:" is set to "All Users", Click the "Options.." button
If "Allow Access for:" is set to "Only These Users:" then:
if the user you wish to connect as is not on the "Only These Users:" list, click on the "+" button
from the list of Users that pops up, select the user you wish to login with.
click the "Select Button"
you should be prompted with a list of actions you can allow to be remotely accessed by ARD.
Check: Observe, Control, Show when being Observed, Generate Reports, Open and Quit Applications, Change Settings, Delete And Replace items, Start text chat or send Messages, Restart and Shutdown, Copy Items.
Click the "OK" Button
Cose System Preferences
Your BMP should now be ready to be remotely connected to. (assuming the firewall on the BMP is off, and no other program like little snitch, or internet barrier is running)
To connect to your BMP:
On your ARD computer, open Apple Remote Desktop
If you look on the left hand side of In Apple Remote Desktop there will be a column, the second item on the column listed Should be "Scanner" click on it
Make sure scanner is set to "bonjour"
from the list, on the right side of ARD you should see you BMP listed with what ever name you set in sharing.
click on it, to select the computer
click on the control screen icon from the tool bar.
you will be prompted for the user name and password to use to connect to the computer.
Good Luck!

How can I control my my mac mini with my macbook air (no wifi)?

How can I control my my mac mini with my macbook air (no wifi)? Also...what is the best method (less lag) for screen sharing?
I own a mac mini Quad Server 2.0 i7 and I use it for audio production. It's great but I need to travel with it. I was hoping some form of screen sharing could be useful using the macbook air to control the mac mini. Therefore, I'd be using the stronger processor of the mac mini but would still be using the keyboard and trackpad from the air.
My two problems:
1. I can't depend on wifi to make this happen. Wifi is not always available when travleing. What would be the best way to configure a LAN connection?
2. The less lag the better for screen sharing. Which apps are fastest?
Thanks in advance.

Both of your devices have WiFi built in. Here is Apple Support's solution:
http://support.apple.com/kb/TA25616?viewlocale=en_US&locale=en_US

Installing EM Grid Control 10.2.0.3 with Database 10.2.0.3 On RHEL4 U3 & U4

Note: This is not an official document, it discusses Oracle Enterprise Manager Grid Control (EMGC) installation on Redhat Linux Update 3 & Update 4 with new database NOT with an existing database. Both OS Updates were installed with FULL PACKAGE INSTALLATION option. Oracle Universal Installer creates the database automatically before creating the EMGC repository.
•     For Linux the base version of the EMGC is 10.2.0.1 and for Windows platform it is 10.2.0.2.
•     The database release is 10.1.0.4 with EMGC 10.2.0.1.
•     When installed it creates three Oracle Homes: 1) db10g (database), 2) oms10g (Oracle Management Service), and 3) agent10g.
Course of Action:
To get to Oracle EMGC 10.2.0.3:
•     Install EMGC 10.2.0.1
 Upgrade Oracle Home oms10g to 10.2.0.3.
 Upgrade Oracle Home agent10g to 10.2.0.3.
To get to Oracle Database 10g 10.2.0.3:
•     Oracle Database 10g 10.1.0.4 will get installed by the OUI automatically
 Upgrade Oracle Database 10g to 10.2.0.1 in new Oracle DB Home.
 Upgrade new Oracle DB Home to 10.2.0.3.
====================================
Installing EM Grid Control 10.2.0.1:
====================================
To install EMGC 10.2.0.1 download all the three files: Linux_Grid_Control_full_102010_disk1.zip, Linux_Grid_Control_full_102010_disk2.zip, Linux_Grid_Control_full_102010_disk3.zip from http://www.oracle.com/technology/software/products/oem/htdocs/linuxsoft.html.
If you have unzipped all the downloaded zip files in separate directories then the very first error message slammed at your face after starting the installation will be something like “OUI-10133: Invalid Staging Area. There Area No Top Level Components”. All you have to do is to unzip all the three files in the single directory (Metalink 395030.1).
After unzipping all the files in the same directory follow the steps that are given on the follow URL.
http://www.oracle.com/technology/obe/obe10gemgc_10202/install/install.htm
BUT the problem is that you will be punched with few other error messages during the installation that will terminate the installation. The WORKAROUND is given below.
There are three stages of the installation by OUI:
1.     Installation of EM Repository Database 10.2.0.1.
2.     Installation of EM Grid Console 10.2.0.1.
3.     Installation of Agent 10.2.0.1.
The first stage completes without any problem and on the OUI you will see: Oracle Enterprise Manager Repository Database 10.2.0.1.0 installed. While installing the Grid Console, during copying files for "Oracle Application Server 10g 10.1.2.0.2" at 90% OUI will pop up an error message "An error occurred during runtime." You will see lines similar to the following lines in the installation log files.
INFO: Calling Action SpawnActions10.1.0.3.0 Spawn
installcommand = /u01/app/oracle/product/10.2.0/oms10g/bin/OracleAS_Relink_Patch.sh
deinstallcommand =
WaitForCompletion = null
INFO: Exception occured during spawning :java.io.IOException: /u01/app/oracle/product/10.2.0/oms10g/bin/OracleAS_Relink_Patch.sh: cannot execute
INFO: Spawning the modified command :/u01/app/oracle/product/10.2.0/oms10g/bin/OracleAS_Relink_Patch.sh
INFO: Exception thrown from action: Spawn
Exception Name: RuntimeException
Exception String: An error occurred during runtime.
Exception Severity: 0
Problem:
There is a bug which is still being worked on by the DEV : Bug 5203165 : Abstract: CANNOT EXECUTE ../oms10g/bin/OracleAs_Relink_Patch.sh AT INSTALL
Note that this is an unpublished bug, not viewable via Metalink. The bug apparently occurs only on RHEL4 (32bit) Update 2 and Update 3 (I faced the same thing in Update 4 as well).
Workaround:
•     Leave the error message as it is and change the execution permission of the script OracleAS_Relink_Patch.sh.
$ chmod +x /u01/app/oracle/product/10.2.0/oms10g/bin/OracleAS_Relink_Patch.sh
•     Now press Retry on the error message pop up window. The installation will resume.
On the same stage while linking at 90% one another error message will pop up “Error in invoking target 'install' of makefile '/u01/app/oracle/product/10.2.0/oms10g/sqlplus/lib/ins_sqlplus.mk'”.
Problem:
Hitting bug : 5203194 :Abstract: RELINK FAILS ON 10.2 GC INSTALL -LIBCLNTSH.SO: UNDEFINED REFERENCE TO NNFGTABLE
Bug is not published in Metalink. As per the description: Installing 10.2.0.2 Grid Control on RHEL4 Update 2 or Update 3 (I faced the same thing in Update 4 as well). This generates an error in the linking phase. The error is generated while attempting to relink sqlplus.
Workaround:
•     Stop installation of all components.
•     Restart the installation and pick the option to resume the installation.
•     This allows the installation to complete.
If by any chance you press continue instead of stopping the installation you should get ready for the garbage OUI is going to throw at you:
Error in invoking target 'install' of makefile '/u01/app/oracle/product/10.2.0/oms10g/network/lib/ins_net_client.mk'
Error in invoking target 'install' of makefile '/u01/app/oracle/product/10.2.0/oms10g/network/lib/ins_nau.mk'
Error in invoking target 'install' of makefile '/u01/app/oracle/product/10.2.0/oms10g/webcache/lib/ins_calypso.mk'
During Setting up 'Perl Interpreter 5.6.1.0.2d'
An error occurred during runtime
During Setting up 'Oracle Application Server 10g 10.1.2.0.2'
The OPMN Process Manager failed to start. Please check the logs in the /u01/app/oracle/product/10.2.0/oms10g/opmn/logs directory for the cause of failure. Once the cause of failure has been remedied, start OPMN manually and click Retry.
HTTP Server Configuration Assistant Failed.
OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
====================================
Upgrading EM Grid Control 10.2.0.1 to 10.2.0.3:
====================================
I hope after installing EMGC 10.2.0.1 you are still intending to upgrade it..... :-D Now for that download GridControl_10.2.0.3_Linux.zip from http://www.oracle.com/technology/software/products/oem/htdocs/linuxsoft.html and follow the README.txt file included with the upgrade patch. Before starting the upgrade you will probably have to apply a patch (4329444) on the existing database (10.1.0.4). Anyway, its one of the prereq that you have to complete.
For upgrade follow the steps given on the following URL.
http://www.oracle.com/technology/obe/obe10gemgc_10203/patching/patching.htm
•     Keep one thing in mind that you will have to apply the above mentioned patch twice. Once for oms10g home and once for agent10g home.
•     Stop all the EMGC related services.
•     When applying the patch to a particular home change the ORACLE_HOME to that home. E.g. when applying the patch on the oms10g home:
ORACLE_HOME=$ORACLE_BASE/product/10.2.0/oms10g
and for agent10g home:
ORACLE_HOME=$ORACLE_BASE/product/10.2.0/agent10g
====================================
Upgrading Database from 10.1.0.4 to 10.2.0.1:
====================================
Download the file 10201_database_linux32.zip from http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201linuxsoft.html.
•     Shutdown all the EMGC related services, the listener, and the database.
•     Start the installation of 10.2.0.1.
•     Since 10.2.0.1 is a base release that is why you cannot install it in the existing Oracle Home i.e. in db10g. You have to define a separate Oracle Home for the new installation say db10gR2.
•     During the installation it will ask you to upgrade the existing database 10.1.0.4 to 10.2.0.1, click YES.
•     Hopefully the installation will go just fine.
====================================
Upgrading Database from 10.2.0.1 to 10.2.0.3:
====================================
Download the file p5337014_10203_LINUX.zip from http://metalink.oracle.com.
•     Shutdown all the EMGC related services, the listener, and the database.
•     Start the installation of 10.2.0.3.
•     During installation it will ask for the Oracle Home, give the new Oracle Database Home i.e. db10gR2 and proceed.
•     Hopefully the installation will go just fine.
•     Start the database, listener, and all the EM GC related services:
o     $ORACLE_HOME/../oms10g/bin/emctl start em
o     $ORACLE_HOME/../agent10g/bin/emctl start agent
o     $ORACLE_HOME/../oms10g/opmn/bin/opmnctl startall
•     Try accessing the EMGC through the browser http://xyz.abc.com:4889/em
•     You will see two Oracle databases in the EMGC, the old one, 10.1.0.4 and the new one 10.2.0.3. Don’t worry it will not bother you at all. It will only occupy a GB or so. Though, you can remove it through OUI.
Congratulations!!!! you have now Enterprise Manager Grid Control 10.2.0.3 with Database 10.2.0.3 on RHEL 4 Update 3.
You can repeat the same exercise for RHEL4 Update 4 as well, but during pre-installation checks you will get 1 warning that:
Checking for compat-libstdc++-296-2.96-132.7.2; found Not found. Failed <<<<
Checking for libstdc++devel-3.4.3-22.1; found Not found. Failed <<<<
Checking for openmotif-21-2.1.30-11; found openmotif-2.2.3-10.RHEL4.5. Failed <<<<
Actually, these packages are already there in the OS but the higher versions. It is evident from the above messages that first it “founds” the package but due to the version conflict it says that “Not found”. All you have to do is click on the check box next to warning, it will change to User Verified or something. Now press Next and follow the same steps that we followed for Update 3.

The quicker way is to use sofware only method to install 10204 oms and dirctly use 10203 datbase directly as a oms repository.
Check the section Installing 'Software-Only' and Configuring Later
http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/installing_em.htm#CCHGBDCB

Control multiple apple tv units with 1 remote app

Is it possible to control multiple apple TV units with 1 remote app on an iPhone/iPad? I have apple tv at home, set up under my own personal apple id. I have an apple tv unit at work which I want to use, but that uses our work apple id. can I control both units without having to log out of my personal id and then log into the work one?

On the ATV menu itself there is an option to name the ATV.
Does that not do it for you?

Grid control 10.2.0.3 with DB 10.2.0.4

Hi,
I have installed Oracle Enterprise Manager Grid Control 10.2.0.3 with new database along with the installation.
I also have a Existing database 10.2.0.4 in another server.
1. How can I upgrade my Grid control 10.2.0.3 to 10.2.0.4?
2. How can I monitor/Connect my Existing database 10.2.0.4 from Grid Control 10.2.0.3?
Is it possible to monitor database 10.2.0.4 from Grid Control 10.2.0.3 which is lower version?
Kindly provide the exact document/steps to do the above activities.
Regards,

Thanks for All for replying.
*1. How can I upgrade my Grid control 10.2.0.3 to 10.2.0.4?*
I have upgraded the Grid Control Agent and OMS from 10.2.0.3 to 10.2.0.4
When we upgrade the OMS which also upgrade the Repository database.
Apply the patchset p3731593_10204_Linux-x86-64.zip (Which comes with Grid_Control_10.2.0.4.0_Linux-x86-64.zip)
su - oracle
cd 3731593/Disk1
./runInstaller (Run two times for Agent and oms upgrade)
Agent upgrade_
During upgrade
Specify Home Details: Select the Agent Home to upgrade Grid Control Agent.
Ex: /u01/app/oracle/OracleHomes/agent10g
OMS upgrade+
Specify Home Details: Select the oms home to upgrade oms
Ex: /u01/app/oracle/OracleHomes/oms10g
*2. How can I monitor/Connect my Existing database 10.2.0.4 from Grid Control 10.2.0.3?*
Install Grid Agent on the existing database server 10.2.0.4
Download Linux_x86_64_Grid_Control_agent_download_10_2_0_4_0.zip from OTN http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html
su - oracle
cd /u01/software/GridAgent/linux_x64/agent
./runInstaller
Refer:
[To Install an Additional Management Agent Using OUI|http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/installing_em.htm#sthref318]
OracleÂ® Enterprise Manager Grid Control Installation and Basic Configuration
10g Release 4 (10.2.0.4)
Part Number E10953-05
3 Installing Enterprise Manager
Thanks
Mukarram Khan
Edited by: Mukarram Khan on Feb 6, 2009 11:04 PM

Java Switch Statement with Strings

Apparently you cant make a switch statement with strings in java. What is the most efficient way to rewrite this code to make it function similar to a swtich statement with strings?
switch (type){
               case "pounds":
                    type = "weight";
                    break;
               case "ounces":
                    type = "weight";
                    break;
               case "grams":
                    type = "weight";
                    break;
               case "fluid ounces":
                    type = "liquid";
                    break;
               case "liters":
                    type = "liquid";
                    break;
               case "gallons":
                    type = "liquid";
                    break;
               case "cups":
                    type = "liquid";
                    break;
               case "teaspoons":
                    type = "liquid";
                    break;
               case "tablespoons":
                    type = "liquid";
                    break;
          }

I'd create a Map somewhere with entries "liquid", "weight", etc.
public class Converter {
    private static Map<String, List<String>> unitMap = new HashMap<String, List<String>>();
    private static String[] LIQUID_UNITS = { "pints", "gallons", "quarts", "millilitres" };
    private static String[] WEIGHT_UNITS = { "pounds", "ounces", "grams" };
    static {
        List<String> liquidUnits = new ArrayList<String>();
        for (int i = 0; i < LIQUID_UNITS.length; i++) liquidUnits.add(LIQUID_UNITS));
unitMap.put("liquid", liquidUnits);
... // other unit types here
public String findUnitType(String unit) {
for (String unitType : unitMap.keySet()) {
List<String> unitList = unitMap.get(unitType);
if (unitList.contains(unit))
return unitType;
return null;
It might not be more "efficient", but it's certainly quite readable, and supports adding new units quite easily. And it's a lot shorter than the series of if/else-ifs that you would have to do otherwise. You'll probably want to include a distinction between imperial/metric units, but maybe you don't need it.
Brian

Can you control Lion on your desktop with an iPhone?

Can you control Lion on your desktop with an iPhone? I do not want to buy a wireless trackpad. Who needs all those batteries? Hoepfully the iPhone can control it in the meantime, and then they need to make wired trackpads.

fliplip1 wrote:
hhmmm. possibility, buT why? It's there in black and white, it just takes a few more mins to read it.
I guess there are multiple ways in which people interpret the same sentence. Not everything is obvious to everyone.
If confused, people generally ask in the forums.

I switched phones with my wife. I went into "Settings" and "Store" to change the applid to mine but the phone still has my wife's applid when updating apps. How do I get my phone to default to my applid?

I SWITCHED PHONES WITH MY WIFE. I WENT INTO SETTINGS AND STORE TO CHANGE THE APPLID BUT IT STILL USES MY WIFE'S APPLID WHEN UPDATING APPS. HOW DO I GET THE APP STORE TO DEFAULT TO MY APPLID?

Any apps that are on the iPhone which were bought / downloaded via your wife's account are tied to her account - so only her account can download updates to those apps. If you remove all her apps and just put yours on then you should be ok.

Control-Hints are suppose work with UIX/XML, right?

Control-Hints are suppose work with UIX/XML, right?
I've added some control hints and they worked correctly when viewed using UIX/JSP pages. However, none of the Control-Hints appear on UIX/XML pages.
The documentation suggests that this should work. Am I wrong?
Bill G...

There's a bit of confusion here (which is entirely our fault).
UIX JSP is a subset of UIX XML (almost entirely; a few tags in
UIX JSP simply wouldn't make sense in UIX XML, like <uix:buildTree>).
However, BC4J UIX JSP is not a subset of BC4J UIX XML; the two
are essentially entirely different libraries. (Any JSP tag that
starts with <bc4juix:> counts as a "BC4J UIX JSP" tag.) I agree
that this is confusing.
As far as control hints go: BC4J UIX XML does not currently
support control hints. It does offer more than enough flexibility
to tweak all the dials and knobs made available by control hints (and
a lot more).

When import tables independent with queue,but show queue already exsists

I try to import tables into my database, these tables are independent with queue, but errors show that ORA-24006: cannot create QUEUE, EMAUSER.EMA_CFG_QUEUE already exists, any idea why impdp is trying to create queue???
command:
impdp user/password TABLE_EXISTS_ACTION=REPLACE dumpfile=Cfg.dump directory=expcfgdir
TABLES=tab_sogaccessview_cfg,tab_sysfunc_cfg
logs:
Import: Release 11.2.0.3.0 - Production on Tue Sep 18 08:07:03 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Password:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "EMAUSER"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "EMAUSER"."SYS_IMPORT_FULL_01": emauser/******** TABLE_EXISTS_ACTION=REPLACE dumpfile=Cfg.dump directory=expcfgdir
Processing object type TABLE_EXPORT/TABLE/TABLE
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "EMAUSER"."TAB_NE_CFG" 12 KB 8 rows
. . imported "EMAUSER"."TAB_AUTHFUNCTIONGROUP_CFG" 5.789 KB 9 rows
. . imported "EMAUSER"."TAB_AUTHGROUPFUNCTIONGROUP_CFG" 5.773 KB 11 rows
. . imported "EMAUSER"."TAB_AUTHGROUP_CFG" 5.718 KB 7 rows
. . imported "EMAUSER"."TAB_AUTHMO_CFG" 9.656 KB 100 rows
. . imported "EMAUSER"."TAB_AUTHUSERGROUP_CFG" 5.554 KB 6 rows
. . imported "EMAUSER"."TAB_AUTHUSER_CFG" 9.070 KB 6 rows
. . imported "EMAUSER"."TAB_CONSISTENCYLIST_CFG" 5.601 KB 6 rows
. . imported "EMAUSER"."TAB_LOOKUPTABLE_CFG" 7.890 KB 13 rows
. . imported "EMAUSER"."TAB_NECMDPKG_CFG" 7.242 KB 10 rows
. . imported "EMAUSER"."TAB_NELINK_CFG" 8.195 KB 6 rows
. . imported "EMAUSER"."TAB_ROUTINGLIST_CFG" 10.11 KB 119 rows
. . imported "EMAUSER"."TAB_SYSFUNCMAPPING_CFG" 9.804 KB 57 rows
. . imported "EMAUSER"."TAB_SYSFUNCSUBSCRIBER_CFG" 5.867 KB 1 rows
. . imported "EMAUSER"."TAB_SYSFUNC_CFG" 14.05 KB 19 rows
. . imported "EMAUSER"."TAB_BOUNDLINK_CFG" 0 KB 0 rows
. . imported "EMAUSER"."TAB_CLUSTEREDNE_CFG" 0 KB 0 rows
. . imported "EMAUSER"."TAB_GUI_CFG" 0 KB 0 rows
. . imported "EMAUSER"."TAB_NECLUSTER_CFG" 0 KB 0 rows
. . imported "EMAUSER"."TAB_NELEH_CFG" 0 KB 0 rows
. . imported "EMAUSER"."TAB_NERETRYFILTER_CFG" 0 KB 0 rows
. . imported "EMAUSER"."TAB_NUMERATED_ROUTING" 0 KB 0 rows
. . imported "EMAUSER"."TAB_SOGACCESSVIEW_CFG" 0 KB 0 rows
Processing object type TABLE_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCACT_INSTANCE
Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCDEPOBJ
ORA-39083: Object type PROCDEPOBJ failed to create with error:
ORA-24006: cannot create QUEUE, EMAUSER.EMA_CFG_QUEUE already exists
Failing sql is:
BEGIN
SYS.DBMS_AQ_IMP_INTERNAL.IMPORT_QUEUE(HEXTORAW('C96000AE3F6A2D17E0435B03A8C0F4C5'),'TAB_EMA_CFG_MESSAGE','EMA_CFG_QUEUE',0,5,0,512,0,'');COMMIT; END;
ORA-39083: Object type PROCDEPOBJ failed to create with error:
ORA-24006: cannot create QUEUE, EMAUSER.AQ$_TAB_EMA_CFG_MESSAGE_E already exists
Failing sql is:
BEGIN
SYS.DBMS_AQ_IMP_INTERNAL.IMPORT_QUEUE(HEXTORAW('C96000AE3F692D17E0435B03A8C0F4C5'),'TAB_EMA_CFG_MESSAGE','AQ$_TAB_EMA_CFG_MESSAGE_E',1,0,0,0,0,'exception queue');COMMIT; END;
ORA-39083: Object type PROCDEPOBJ failed to create with error:
ORA-24006: cannot create QUEUE, EMAUSER.CONFIG_QUEUE already exists
Failing sql is:
BEGIN
SYS.DBMS_AQ_IMP_INTERNAL.IMPORT_QUEUE(HEXTORAW('C96000AE3F682D17E0435B03A8C0F4C5'),'TAB_CONFIG_MESSAGE','CONFIG_QUEUE',0,5,0,512,0,'');COMMIT; END;
ORA-39083: Object type PROCDEPOBJ failed to create with error:
ORA-24006: cannot create QUEUE, EMAUSER.AQ$_TAB_CONFIG_MESSAGE_E already exists
Failing sql is:
BEGIN
SYS.DBMS_AQ_IMP_INTERNAL.IMPORT_QUEUE(HEXTORAW('C96000AE3F672D17E0435B03A8C0F4C5'),'TAB_CONFIG_MESSAGE','AQ$_TAB_CONFIG_MESSAGE_E',1,0,0,0,0,'exception queue');COMMIT; END;
ORA-39083: Object type PROCDEPOBJ failed to create with error:
ORA-24006: cannot create QUEUE, EMAUSER.TASK_QUEUE already exists
Failing sql is:
BEGIN
SYS.DBMS_AQ_IMP_INTERNAL.IMPORT_QUEUE(HEXTORAW('C96000AE3F662D17E0435B03A8C0F4C5'),'TAB_TASK_MESSAGE','TASK_QUEUE',0,5,0,0,0,'');COMMIT; END;
ORA-39083: Object type PROCDEPOBJ failed to create with error:
ORA-24006: cannot create QUEUE, EMAUSER.AQ$_TAB_TASK_MESSAGE_E already exists
Failing sql is:
BEGIN
SYS.DBMS_AQ_IMP_INTERNAL.IMPORT_QUEUE(HEXTORAW('C96000AE3F652D17E0435B03A8C0F4C5'),'TAB_TASK_MESSAGE','AQ$_TAB_TASK_MESSAGE_E',1,0,0,0,0,'exception queue');COMMIT; END;
Job "EMAUSER"."SYS_IMPORT_FULL_01" completed with 6 error(s) at 08:07:15

http://ora-24006.ora-code.com/

Control of 96 switches independently with a 2d Boolean array

Similar Messages

Maybe you are looking for