Control over voice upates?

How much control do I have over the voice updates? Can I set the voice to tell me when a minute goes by? I am doing the Body-for-Life workout and I run continuously for 20 minutes. Every minute I have to change my speed so not having to constantly look at my watch would be a plus.
I was planning on making a 20 minute mix with a "beep" every minute, but if the Nike+ works it would be better since I can use any music.

still don't know...

Similar Messages

  • Intermittent Voice Control Over Bluetooth

    I'm finding that voice control over Bluetooth using my Plantronics 510 headset regularly stops working, while other Bluetooth functions remain active.
    Normally, holding the button on the headset down will activate Voice Control. I can hear the "listening" tone, and the phone responds to my command (e.g. "Call Telecon One Work").
    On several occasions, I've found that holding the button fails to activate Voice Command, but other BT functions controlled by the headset button still work - a double press, for example, still redials the last number. After rebooting the phone, voice command is once again available by pushing the headset button.
    OT - At some point, it would be nice if iPhone OS 3.1 was added to the list of OS choices in the pulldown menu for discussion posts.

    I'm having the same problem. For me, the problem only starts after I plug in the iPhone to charge (while connected to the bluetooth).
    Is that the same for you?

  • Voice control over bluetooth?

    Voice control over bluetooth? even with the apple headset?

    Activated my new 3G S yesterday and I just tried it with my Apple bluetooth headset today. Sadly, it's a no go. That is, the headset works just as before (with the nice on-screen battery charge indicator), but pushing the button does absolutely nothing except answer incoming calls.
    I agree, Apple missed the boat on this one. Been waiting for voice dialing since the original iPhone (which the new 3G S replaces Knowing Apple's history, they will likely release a new bluetooth headset that will have a special button to activate Voice Over, but not update firmware for old bluetooth headsets or 3rd party headsets to work...

  • Appear to have lost all control over phone

    Hi
    i'm hoping somone here can help. i've lost complete control over my music volume and certain apps just keep opening at random. It started on the way into work, smart connect seemed to keep trying to open and i heard a womans voice talking over my music, it was the instructions on how to use smart connect.
    Since then i've had my music go loud, then all the way to silent and vice versa. it's extremely frustrating. i've disabled Smart Connect entirely and now when i start music playing, my screen won't lock at all. At one point i somehow even opened the Xperia version of siri by accident.
    No idea whats going on, any advice?
    i'm very close to just factory resetting the entire thing.  i'm running the latest version of Android and all my apps are up to date

    That's quite odd, I'd do a Phone repair via PC Companion or Mac Bridge better than factory resetting it.
    A proud Sony User since 2002
    If I was helpful to you, thank me by Kudos

  • How to get more control over DVR recordings

    Looking for some advice on how to make sure the DVR records (and keeps) the episodes I want.  
    An example:
    I want to record a series that is still producing new episodes, but is also in repeats in syndication.  For example, Big Bang Theory.  This has new episodes each week on CBS, but has about twenty or so repeats each day on TBS.
    Due to the high number of repeats, any new episodes pretty quickly get overwritten by the repeats.  So is there a way to record both first-run and repeat episodes, but prevent the first-runs from getting overwritten before I can watch them?

    GRubinstein1 wrote:
    I have no idea if the format has recently been changed or what the issue is, but when I try to get more control over my DVR recordings, I can't. What I mean by that is that I cannot alter "First-Run and Repeats" to "First-Run Only," I cannot specify the specific channel to record on, I cannot say how many episodes I want it to keep, etc. Here is a step-by-step guide of what I do and what the problem is:
    I press the "menu" button on the remote. I scroll down to DVR. I select the option of "manage series recordings." I select one of my shows. I'll use "Masters of Sex" as my example. I select "Masters of Sex." It's at this point where I get a problem. When I select "Masters of Sex," the only option I get is to cancel the series. No option to only record first-runs. No option to keep only 3 episodes instead of 5. No option to change it so it saves until I manually record it. Nothing. I've tried not selecting "Masters of Sex" and instead using the right arrow button to scrol over to the settings of the show. But nothing happens when I do that. It doesn't give me access to these options. This is incredibly frustrating because not only do the shows delete automatically at a certain point, but it records EVERY SINGLE AIRING OF EVERY SINGLE SHOW I RECORD. This means I have to go through several times a day to the "Scheduled Recordings" section and delete scheduled recordings of shows I have already seen. It's absolutely ridiculous, particularly for cable shows, which air episodes frequently throughout the week. Please help me if you can.
    Put simply, I cannot change the settings on how I record each show.
    Try the Box's Menu/customer support/tops support tools/Fix Fios TV option. (exact working may be different on your box)

  • Does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

    does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

    Several ways to get similar results.  Image > Adjustments > Posturize with low values similar to what you'd use n Cutout.  This is the most flexible way I can think of as you keep the image in RGB mode with layers intact.  A more radical approach would be to reduce bit depth using Indexed Colour.  You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color.  There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
    A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
    Now if only this forum could filter out bizarre content.

  • Re: More control over html tags needed

    I have trying for a while to find an elegant solution to printing reports in such a way as to have headers and footers repeated on every printed page.
    <BR><BR><BR>
    The two main solutions seem to be either using PDF (using FOP) or controlling the size of the regions anually (by hardcoding heights etc.). I am confident that with more control over the html tags (or the ability to place my own) around certain areas the problem could be solved very simply with CSS.
    <BR><BR><BR>
    What I would like is a way to change the way that Apex treats table headers.
    <BR><BR><BR>
    Presently it places the headers within a tbody tag and the uses th for every column. Ideally I would like to see this changes from tbody to thead. Given that the chances of this happening in the near future are minimal (not something that I am upset about as it would not be logical to change such things every time someone wants things to suite them better), I would like to be able to place a tag either before or after the tbody tag.
    <BR><BR><BR>
    Something like:
    <BR><BR><BR>
    div id="tableheaders"
    <BR><BR><BR>
    If anyone knows how to do this your help will be greatly appreciated. Given that, printing repeated headings can be controlled relatively simply.

    Hello Andrew,
    I believe the following might be of help - placing <thead> and </thead> around headers
    Regards,
    Arie.

  • Acrobat 9: Control over font in text box

    Versions: OS X 10.8.5 with Acrobat Pro 9, latest patch.
    I am experimentally preparing a four day training course by adding my instructor information to a PDF of the slide show.  There are only 850 slides, so it makes sense to experiment with this small document.
    All is going well.  I have created some custom stamps.  Acrobat has only crashed twice, losing not more than two hours work as a result.  I am optimistic I will be good to go in 10 more days.
    I have just copied some test into a text box and it copied as black and blue text with a larger font than the standard red font that I have been seeing until now.
    It occurs to me that this implies there may be some control over the text.  I realize that Acrobat is not meant to be a document preparation tool, so I hunted around somewhat for a way to change the text box text to not-red, gave up and I have been putting up with it until now.
    However, there are implications (but no clearly stated solutions) that there is a way to change the font, size and colour of text in text boxes.
    Do you know how?  I cannot work it out, nor can I find a solutoin.  I can see that the Commenting preference pane offers Small Medium and Large text.  There does not seem to be any other control other than the style (italic, bold, superscript, subscript) that is offered in the context menu.
    Hints?  Thoughts? 

    Pryanja.
    Thanks again.  If offers a dropdown for Colour, a box for style (plain, bold italic etc) and a button marked more, but they seem to do nothing at all.  They don't change what I type, and they don't affect selected text.  Looks to me tha they just take up some toolbar space.
    Is it possible that it does not work on Mac?

  • How do I remove old web site when publishing new site with same URL in iweb? Hit replace when publishing new iweb site (so we could have control over changes) but new site name is attached to old via a / after our www address we want to keep.

    I hit the replace when publishing the new iweb site (so we could have control over changes - last one was not an apple based site) but new site name is attached to old via a forward slash and underscore after our www address. Makes it very messy with a very long web address.  Original address now followed by iweb site name followed by name of first page? Went for iweb as not that computer literate - all going so well?! Cheers for help in anticipation. Have to get off to work now but be great end to week if we could be sorted tonight. Rupes

    Well yes of course, if you try and publish through iWeb there won't be an option to publish without your site folder which is exactly why I told you to download Cyberduck and use Cyberduck to upload your site to your server having published your site from iWeb to a local folder.  That is what you need to do if you don't want your site name to be included in yoru url.
    It would have been easier also if you had used Cyberduck initially to connect to your server and delete your old site yourself - at least that way you would have deleted the correct files rather than relying on your hosting service to do it and doing it incorrectly.
    Download Cyberduck and then select the publish to a local folder option from iWeb and then use Cyberduck to upload your site to your server, but rather than uploading the whole site folder and separate index file, upload ONLY the contents of your site folder and then your url will be http://www.domain.com/page_name.html.
    It really isn't rocket science!

  • My iphone 4 after update stuck lock screen  but working other option ex  control pannel voice control , call attenting etc.please clear buges soon now suning os7.0.3

    my iphone 4 after update stuck lock screen  but working other option ex  control pannel voice control , call attenting etc.please clear buges soon now suning os7.0.3

    my iphone 4 after update stuck lock screen  but working other option ex  control pannel voice control , call attenting etc.please clear buges soon now suning os7.0.3

  • Step by step Create a Desktop Administrator to have full and total control over desktops only

    I have been trying to setup a Desktop Admin so that the group has full and total control over all desktops. I am using SCCM 2012 SP1. I have found very little documentation that explains in detail on how to set this up. I have read about role based access,
    but found nothing that explains in detail how to setup an administrator that can do everything but only with desktop machines, not servers.

    Hi John and Matthew,
    Great link John, thank you for that.  I did follow the instructions to a "T", but the Desktop Admin is still having problems.  He is trying to image a new machine (so it is not in the collection yet). When he tries to import it by using the "Import
    Computer Information Wizard", he gets to the "Choose Target Collection" tab, selects the "Browse" button, but cannot see any collections.  I have verified (using the instructions that Matthew provided - thank you) that he is a "Full Administrator" for
    the Desktop collections and folders where they are located.
    Could you please tell me what I am missing?
    Ken

  • When I copy and paste a chapter from MS Word into Pages my tables and equations are trashed.  But importing them results in no control over my template How do I get my chapter into my template without copying

    When I copy and paste a chapter from MS Word into Pages my tables and equations are trashed.  But importing them results in no control over my template How do I get my chapter into my template without copying?

    Try just Opening the Word .doc from within Pages and see if that gets closer to what you want, then copy the chapter you want from the Pages version.
    Peter

  • HT1386 How do I copy music from an old iPod?  Why do you have to make things so difficult?  These are my files that I paid for but once I put them on your devices, I no longer have control over them.  I've wasted so much time on these stupid problems.

    How do I copy music from an old iPod?  Why do you have to make things so difficult?  These are my files that I paid for but once I put them on your devices, I no longer have control over them.  I've wasted so much time on these stupid problems.  I used to be able to do this until you "improved" things.

    Thanks, Deggie. I thought Apple would see my feedback.  I would just like to know if there is a simple way to copy just a few music files from an old iPod.  I saw instructions on how to copy all of them from the iPod but it was complicated and I really didn't want to copy all the songs.  I guess I could delete all the songs but the ones I want to copy then go through that process again.  Do you know how to back up music to my computer?  I don't want to have to go through this again and possibly lose music.

  • In iOS 5 on the iphone 3gs, how does one disable voice control, not voice dailing.  I have never wanted or used voice control please help me disable it.

    In iOS 5 on the iphone 3gs, how does one disable voice control, not voice dailing.  I have never wanted or used voice control please help me disable it. 

    are you talking about voiceover where the phone is reading things out loud to you? you have to double tap things in voiceover in order to select them. you'll need to go to settings > general > accessibility > and turn off voiceover there

  • STO- How to control Over delivery with batch split?

    Dear All,
    In STO Scenario, how to control the over delivery?
    I created a PO for the Intra Company stock transfer & Delivery created in the Background with the T Code VL10B. When I am doing picking using T code VL02N, the system is allowing to add  more than PO Quantity in batches and system displaying the warning message (Specified quantity is greater than the open quantity/Message no. VL287) & allowing to save the deliver document..
    Hence plz suggest how to restrict the same.
    Hope it is clear.
    Thanks & Regards
    varun

    I am also in the same boat.
    I searched the forum and got the link STO - How to control Over delivery ?
    I checked OSS notes 548914, 386340,215488 but to no avail.
    I suggested user exit USEREXIT_SAVE_DOCUMENT_PREPARE  in include MV50AFZ1 to my technical team for finding the resolution. So far it is still on hold.
    If you come across any other solution, you can update the forum so that it would be helpful for many others.
    Regards,

Maybe you are looking for