Control Slave Select line with blackfin

Hi
I am trying to communicate with an SD memory card using the BF-537 ez-kit board. I have the SPI interface set up, but i need to send a 6-byte command at once without the slave select line changing. It appears the only word size options availabe are 8- and 16-bits... is there a way to do this??
Thanks in advance!
-Eman2334

Hi Eman,
What VIs are you using to send data? Is the 6 byte command for the flash memory? Is it mentioned in the memory manual? Can you verify that its 6 bytes and not bits.
Thank You,
Jaidev
National Instruments
LabVIEW Embedded Product Support Engineer

Similar Messages

How no to select lines with NULL values

Hi,
I am not a newbie newbie in SQL but I do not understand why I cannot retrieve the lines where there are null values.
The table observatoire.fiche has 2 columns with default values set to NULL : total_heures, and total_heures_exceptionnelles. These are numeric types columns.
I want not to select lines where :
total_heures equal NULL AND total_heures_exceptionnelles = NULLI have tried this but I do get an "Invalid relational operator" error message.
select a.nom || ' ' || a.prenom d, a.agent_id r
from   OBSERVATOIRE.AGENT a, observatoire.fiche b
where a.agent_id = b.agent_id
and    b.total_heures NOT NULL AND total_heures_exceptionnelles NOT NULL
group by a.nom, a.prenom, a.agent_id
order by a.nomCould you help me ?
Thank you for your kind answers.

Satyaki_De wrote:
I think this is not the good way to do it. Did you check my solution? It should work the same output as your solution.Really ?
test@ORA10G>
test@ORA10G> -- (1)
test@ORA10G> with t as (
2    select 1 as x, 10 as total_heures, null as total_heures_exceptionnelles from dual union all
3    select 1, null, 20   from dual union all
4    select 1, null, null from dual union all
5    select 1, 30, 40     from dual)
6 --
7 select x, total_heures, total_heures_exceptionnelles
8 from   t
9 where x = 1
10 AND NOT ( total_heures IS NULL
11            AND
12            total_heures_exceptionnelles IS NULL
13          );
         X TOTAL_HEURES TOTAL_HEURES_EXCEPTIONNELLES
         1           10
         1                                        20
         1           30                           40
test@ORA10G>
test@ORA10G> -- (2)
test@ORA10G> with t as (
2    select 1 as x, 10 as total_heures, null as total_heures_exceptionnelles from dual union all
3    select 1, null, 20   from dual union all
4    select 1, null, null from dual union all
5    select 1, 30, 40     from dual)
6 --
7 select x, total_heures, total_heures_exceptionnelles
8 from   t
9 where x = 1
10 AND    total_heures IS NOT NULL
11 AND    total_heures_exceptionnelles IS NOT NULL;
         X TOTAL_HEURES TOTAL_HEURES_EXCEPTIONNELLES
         1           30                           40
test@ORA10G>
test@ORA10G>isotope

Table Controls: - Find selected line index

HI,
I have a table control . In tis 4 lines are visible at a time..1 field in this table comntrol is a button.
when the user clicks on a button, the details of the corresponding line should be used to trigger a new screen. If the no of lines in the table control is less than 4( o of visible lines) , i can use get cursor line, to get the index of the line selected. . but if i scrolled down and selected the button in the 15 th line, then get cursor line cannot be used as it will retrieve the no 3. CAn u please give me a solution.
thnx.

declare two variables to get line count and line index
data: wrk_linecnt(10),
wrk_lineindx(10).
get cursor line wrk_linecnt.
wrk_lineindx = <table control name>-top_line + wrk_linecnt - 1.
read table <internal table used in table control> index wrk_lineindx.

How do I execute some code when a line of a table control is selected?

Hi,
I would like to execute some code when a line of a table control is selected. At the moment I have to select one or multiple rows and then press enter, this forces a screen refresh and my code is executed but I would like the code to be executed as soon as any line is selected.
I've done something like this using ALV grids and object orientated code but is there a way of doing this in a normal non-OO table control?
Thanks in advance.
Gill

Hi,
U need to declare a char1 field for marking (mark field). This will reflect with value 'X' in your tcontrol internal table for all the selected rows.
Now u need to handle the okcode for enter in your PAI.
There u need to loop through the table for all marked fields.
There after u can do what ever u want.
Venkat.

Hi I have Mountain Line with Safari 6.0.2. I used to open Facebook, Youtube, Twitter etc. and everytime I select "Stay signed in" "Remember my password" etc. but it doesn't save my passwords and everytime I have to sign in again. I never sign out from t

Hi
I have Mountain Line with Safari 6.0.2. I used to open Facebook, Youtube, Twitter etc. and everytime I select "Stay signed in" "Remember my password" etc. but it doesn't save my passwords and everytime I have to sign in again. I never sign out from these websites but when I open it next time, it requires username & password.
Does anybody know the problem & solution, plz help. I also found disk erros and reaoired permissiomn and the restarted and did disk utlty again and repaired the same disk errors and then did a restart and still does not remember passwords or ask me. Did all this still no luck it saved apple login on here and saved gmail account but others one it used to save does no longer.here is what i did below and still no luck.
Instructions
Set Your Passwords Preferences
1
Open up your Safari Web browser and choose 'Preferences' from the Safari pull down menu
2
Click on the heading 'AutoFill.'
Click on the box next to 'User Names and Passwords.'
4
Close the 'Preferences' window.
Save Your Passwords
5
Go to a Web page that requires a password and enter in your chosen password. Safari will then ask if you would like to save this password.
6
Click on the button 'Yes' in order to save the password.
7
Complete steps 1 and 2 for any other passwords that you want Safari to remember.
Manage Your Passwords
8
Go to the 'AutoFill' section in the Safari Preferences window.
9
Click on the 'Edit' button to the right of where it says 'User Names and Passwords.' This will bring up a window displaying all of the passwords and usernames that you have authorized Safari to save.
10
Click on a password listing and push the 'Remove' button in order to delete the password from Safari's memory.
11
Choose 'Remove All' in order to delete all of the saved passwords.
12

I suggest that you run software update, after which you should have Safari 6.0.5 - then check Safari - Preferences - Privacy & see that 'Block cookies' is not set to Always.
Failing that - switch Safari extensions Off via Safari - Preferences - Extensions & test again

Copy selected lines in the table control

Hi friends,
I Have a screen 200 in which i have a button COPY and table control.
In my table control i have 6 lines of data.
now my requirement is when i select any lines ie : let us say i ahve selected 1 , 3 , 5 lines of my table control and when i click on the button COPY of that screen. i need those 3 selected lines 1 , 3 , 5 to be copied again in the table control
example :
line 1         selected
line2
line3          selected
line4
line5          selected .
line6
now my table control should be
line1
line2
line3
line4
line5
line6
line1
line3
line5
How can i do that
Regards
Priyanka.

I have similar issue...i need help how to accomplish automatic addition on every line. example (see below)
this is how it looks right now
DATE    EMPLOYEE       DEPT JOB     LOT     OPER#     LX_HRS     OP_SETUP     LX_TYPE     COMPLETE
2/23/2009     M.Paquiao   NB         1960     001     10             1.50                14.00                     S                      NO
2/24/2009                                                      1.00             14.00                  S                        NO
2/25/2009                                                      4.50                14.00                  S                    NO
2/27/2009                                                      3.00             14.00                  S                        NO
2/28/2009                                                      1.50             14.00                  R                       YES
3/1/2009                                                      2.00             14.00                  R                  YES
this what I need it to do when I meant automatic addition of each line:
DATE   EMPLOYEE     DEPT     JOB     LOT     OPER#     LX_HRS     OP_SETUP     LX_TYPE     COMPLETE
2/23/2009     M.Paquiao      NB        1960     001     10             1.50        14.00               S         NO
2/24/2009                                                      2.50             14.00                  S             NO
2/25/2009                                                      7.00        14.00                  S             NO
2/27/2009                                                      10.00     14.00               S             NO
2/28/2009                                                      11.50     14.00               R             YES
3/1/2009                                                      13.50     14.00               R             YES
As you can see everything is the same but on column LX_HRS, the first example one is not doing anything addition but on the second example is now doing addition. This additions were done manually, how can I tell crystal to add each line, in the example above, the
first example                                              second example: (addition is involved)
date                lx_hrs                                  date                  lx_hrs
2/23/09           1.50                                     2/23/09              1.50
2/24/09           1.00                                     2/24/09              2.50 (sum of : 1.50 + 1.00 was added)
2/25/09           4.50                                     2/25/09              7.00 (sum of 2.50 (on date 2/24/09 & 4.50 from date 2/25/09 of the first example).

Creating a Select-option with no-intervals and a parameter on a single line

Hi
I have a unusual reqirment of creating a select-option with no intervals obligatory and a parameter on a single line. Is this possible? Can any one please provide me a solution for this. I reffered to the SAP help and what i found out is a single line can contain only parameters.

Hi,
humm,
I guess it's not possible on one line.
SORRY I've tried and it works!
Try this :
SELECTION-SCREEN BEGIN OF BLOCK main WITH FRAME
TITLE text-s01 NO INTERVALS.
SELECTION-SCREEN begin of line.
PARAMETERS : p_gjahr LIKE bkpf-gjahr OBLIGATORY MEMORY ID gjr.
SELECT-OPTIONS : s_blart FOR bkpf-blart MODIF ID knt .
SELECTION-SCREEN end of line.
SELECTION-SCREEN END OF BLOCK main.
Regards,
erwan

Is LabView good at precise motion control for things like running an assembly line with lots of cars moving about?

Is LabView good at precise motion control for things like running an
assembly line with lots of cars moving about? Precise speed and
acceleration control? Safety interlocks?
Thanks for any help you can offer!
Sent via Deja.com http://www.deja.com/
Before you buy.

If you are a long time Nokia/Symbian fan then you will Know full well that Nokia phones ALWAYS improve with software updates, Symbian will not be abandoned and will not be replaced by WP7, it will continue to evolve and improve, as will the handsets. Anyone who desires or wants a different OS should try one, because it's a free world, but really, the 'perfect' OS doesn't exist, and Symbian suits me for now and I will rely on Nokia to keep it up to date, and reliable.
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

What is the best MIDI controller for Logic, and is Axiom Pro the only line with "Hyper Control?

What is the best MIDI keyboard/control surface to use with LOGIC (Studio - which I assume is the latest & greatest version) and is Axiom Pro the only line that has Hyper control? I already own the Axiom Pro 61, but prefer more keys, and though I like much about it, the keys aren't very easy for playing more complex material, and there is an obvious delay regarding attack response (esp. noticeable at faster speeds). There are other issues as well I've read of regarding key sticking (though I consider myself lucky mine do not, there is nontheless a sluggish clunckiness issue which neither helps agility/acuracy nor the delay factor.) and the unit not lasting very long before it breaks and needs repairing. And lastly, I am no fan of Avid and care not to support them in the least.

Sorry, but is this an iPad question? Axiom Pro 61 is not an iPad-compatible peripheral, so perhaps you mean to post in the Logic forum?

How to select line items in recording(BDC)

Hi All,
we are trying to Recording QP02 transaction ,we have inputs like material,plant,Group,Group Counter.
after entering these inputs we will get multiful line items(inspection characteristics).we need to check one field for each item.
How can we get this?
Please help me?
Thanks,
Peddi reddy.

Hi Kamesh,
Thanks.
After selecting line items i am selecting control indicators Tab.
then Pop up screen called as (Edit characteristic control indicators) will open ,..then just pressing enter..the it will show another pop up ..here i am selecting one field(Long term Inspection)..the process has to do for all line items.
In My program i have copied BDC performs which i got from Recording.
Do i need to change tha performs or will it work?
i tested in foreground with another material .... upto 3 or 4 line items its working fine.after that sytem does.t say anything.
if i need to chage performs please help me .

Windows 7 on Bootcamp I am locked into a DOS screen and it is not installing. I have been on line with Apple and microsoft and they can't help. I have lated versions of Lion and bootcamp. HELP

I ran bootcamp and tried to install Windows 7. I end up with a DOS screen and an unresponsive keyboard.
I have been on line with Apple and microsoft and they can't help. I have lated versions of Lion and bootcamp. HELP!
My Lion is up to date.
I used the 64-bit windows disc.
Should I try parallels?

Do you have a DOS screen with a command prompt or just a blank screen?
Is your Windows 7 x64 an original MS Full Version Installation DVD?
Did Windows 7 Install Disc start?
If it did you would have had to choose the location of where to install Windows 7.
Did you select the Partition named BOOTCAMP that corresponded to the Partition Size you created in BootCamp?
Were you asked to format the Partition?
Did you format the partition to NTFS and then get an option to click NEXT and actually start the Windows 7 installation?
Do you have a wired USB keyboard and wired USB mouse?
If you actual went through the installation and restarted then here are some things to try:
First try doing a CONTROL-ALT-DELETE and see if a Windows Option Screen appears.
If you get the Screen you will have some options displayed.
You want to highlight and click TASK MANAGER which should be the bottom choice I beleive.
If Task Manager runs you will get a window showing all the processes running.
See if you can find EXPLORER.
If EXPLORER is running highlight it and go to the bottom right and click the END TASK button.
Now go to the Top Left Menu Bar.
Click FILE
In the sub menu that opens select RUN or RUN NEW TASK (Not sure which it is in Windoes 7 as I am running Windows 8)
Once RUN is selected a new window will open to CREATE NEW TASK
Type in EXPLORER and then the OK button.
If Windows 7 installed properly the Desktop should appear after a bit of time.
Your first concern is to get your keyboard running so you may have to remove and reinstall Windows using Boot Camp on the Mac Side.
Let us know how it goes..

Can Flash create dashed line with blunt not rounded dashes ?

Hi,
using Flash8
I can select line tool and dashed line in properties and draw a dashed line and get a line of sausages. How do I get a line of dashes without rounded ends to each dash ?
Line option has end caps option with None (gives straight or blunt tip to line, round gives rounded tip .
Draw a line with None and its got blunt ends, select it and choose dashed line option and it gets round ends to the dashes, the end cap option is greyed out !
Are dashed lines with blunt dashes now possible again with CS4, a forum poster also found that CS3 no longer gave blunt dashes ?
Why do I ask:-
I am trying to bring a map into Flash8 from Illustrator (Illus version 10 as it allows blunt tip lines to remain blunt it was said on the forum)... which has blunt ends to roads and has blunt type dashed lines. The roads remain blunt..GOOD !..but the dashed lines become what looks like a solid line. BAD !
I do a right click - break apart, then double click one of those now solid lines that should be dashed, and I am able to select a portion of the line, it is no longer a continual line as drawn in Illustrator. Properties shows it as solid line. Flash8 obviously having a problem with supporting Illustrator 10 dashed line then !
Select dashed in properties box and I get a portion of the line as sausage dashes, but working my way along the line doing each bit sees a far from correct dashed line result as sausages dont start stop evenly as each line is a separate entity and ignores the previous line.
Looks like I shall have to try and draw the line as one long line again in flash but unless I can give it blunt dashes when done, there is no point even trying that method, hence my question.
Would the latest Illustrator and Flash versions (CS4) allow blunt type dashed lines to appear in Flash ?
This is crucial for bringing maps into Flash.
Envirographics

I noticed one problem with my solution.
If you look, very carefully, at the end of the stream, it's flat. Not rounded like it should be. After a bit of trial and error, I tried a different brush:
Note that, in addition to the rounded rectangle (done with the new corner controls in the latest version of Illustrator CC that just came out) and the three circles, there is also a rectangle, with no stroke and no fill, to provide a space at the end of the three dots. Here is the result:

How do I search for lines with a particular pattern and delete them when a match occurs

How do I search for lines with a particular patter and delete them when a match occurs? For example delete lines containing SUB_NAME = "?" where ? is any string.

How do I search for lines with a particular patter and delete them when a match occurs? For example delete lines containing SUB_NAME = "?" where ? is any string.
Lines in what? And what language are you using to develop with?
Are the lines in a text file? A RichTextBox? A TextBox? Some other control? A List(Of String)?
Is there some expectation by you that by providing what you wrote in your question post that the knowledge in your mind about what you are thinking about will mysteriously emanate to anybody reading your post so all of the sudden your knowledge will
become their knowledge and they will be able to provide you with an answer as they will suddenly understand what you are trying to do? Because that's probably impossible. Most people try providing enough information in a question so anybody, even stupid people
like me, can understand what they want. Maybe you should try that. As well as selecting an appropriate forum for your question in the future. Usually a question like this is related to programming in a particular language therefore a language forum may be
a good choice. Or not.
La vida loca

Read select line in the table

hi,
can any one tell me how we code to get the selected line in the display table
thanks.

Hi ,
1.Just select a row of table and click on button to read the value of selected row.
2. In the OnAction of button, just read the context node binded to the table using Code wizard(Control + F7).
3. below menttioned code will be automatically genearated and selected value's content will be stored in ls_cn_flight :
DATA lo_nd_cn_flight TYPE REF TO if_wd_context_node.
DATA lo_el_cn_flight TYPE REF TO if_wd_context_element.
DATA ls_cn_flight TYPE wd_this->element_cn_flight.
* navigate from <CONTEXT> to <CN_FLIGHT> via lead selection
lo_nd_cn_flight = wd_context->get_child_node( name = wd_this->wdctx_cn_flight ).
* get element via lead selection
lo_el_cn_flight = lo_nd_cn_flight->get_element( ).
* get all declared attributes
lo_el_cn_flight->get_static_attributes(
IMPORTING
static_attributes = ls_cn_flight ).
CN_FLIGHT is the node binded with table.

How to draw centre line with white background?

Hi,
I need to draw a centre line with white background on it. Now i'm doing it by pasting the main line in the background and giving it white so that it shows a white backgound. Is there a way to do just by drawing like normal lines. If we can, is it possible to control the white backgound only to show less than the original line in both ends. This is for illustrations i do for exploding views and i need to draw this line to show it as assembly drawing.
Thanks
Manoj

1. Draw a white line segment of desired width (stroke weight) with round cap (Stroke panel) for the background line.
2. Copy, Paste in Front
3. Change to desired foreground color, butt cap, reduce stroke weight.
4. Opt/Alt–drag foreground segment to overhang background segment by desired amount on both ends.
5. Select both segments and drag to Brushes panel, choose Art Brush.
6. In Art Brush Options choose Stretch Between Guides, drag guides somewhere to the inside of curve of round caps. (If in step 3 you chose black, set Colorization Method to Tints. Then you can select any color for the foreground segment by setting the stroke color.) Name the brush as you choose. Click OK.
7. Draw any path and apply the brush.

Control Slave Select line with blackfin

Similar Messages

Maybe you are looking for