Controling field display by Transaction Type

Hello,
Is it possible to control field display by Transaction Type in CRM 7.0 anymore given that we have the Web UI now. I remember from my 5.0 experience that we used CRMV_SSC to control this at transaction type. I would imagine, the functionality has not been taken away but rather changed to a different place where we control this. Anybody dealt with a similar requirement? Any ideas / suggestions/ tips?
Essentially for transaction ZOR1 we want to surpress a tab / fields, but for ZOR2 we want to keep those available. ZOR1 and ZOR2 belong to the same transaction category.
Thanks in advance..
KK

Kevin,
This is all controlled now by Configurations in the WebUI, along with the Component/view. As an example, via the WebUI try going into each of the transaction types. You have not said what kind of transaction types you were referring to, so I'm just going to assume it's Opportunities for the time-being. So, If you click on each of the transaction types and when the screen is displayed place the cursor on an editable field and press F2. This will then display the technical details behind the screen. Here you'll see that each tranx type has it's component/view name and context node. You will also see the configuration as well. So, the transaction types are actually controlled by the code and screen design behind the component and view, but there can be a different screen layouts for the same tranx type dependning of the configuration used. And, this configuration is normally identified by the business role that you're currently using.
So if that was a bit wordy, but if you look at the technical details behind each of the tranx types it should become clear.
Jason

Similar Messages

Authorization Control on Transaction Type Fields

Hi Friends,
I have created 4 customised fields in Complaint Transaction Type. Lets say A1,A2 and B1,B2.
Now the requirement is to control the fields based on roles or users. Is this Possible? if yes how?
I mean UserA will be able to see and edit field A1 and A2 of Transaction Complaint where as UserB will be able see and edit field B1 and B2 of same transaction.
Regds...
Arup

Hi Arup,
You have to create two seperate configs. Based on the Business Role of the logged in user you can swap the same in method
DO_CONFIG_DETERMINATION.
Regards,
Masood Imrani S.

Transaction type called by ITS - Transaction Launcher

Hello guys,
In the ICWC in CRM 5.0 what transaction type could we call with ITS by Transaction Launcher?
For example, I know that we can call transaction like ppoma_crm, bp, is01, but if we defined Z transaction type in the path SPRO » CRM » Transactions » Basic settings » Define Transaction Types, could we call this transactions by ITS in Transaction Launcher?
Could you take off me this doubt?
Best Regards,
Mary

Hi
The transaction launcher allows to connect to any remote CRM ERP or R/3 transaction as well as URLs to a navigation bar. Thus, the remote transactions can be maintained directly in IC WebClient.
Any link entry of the navigation bar that is supposed to call the transaction launcher needs a navigation bar entry that points to a launch transaction ID. Here the details of the transaction to be launched are described: the launch transaction type, the type of object to be called the method (like create, display, change) and possibly parameters to be passed to the transactions. These settings can be configured using the transaction launcher wizard.
Transaction launcher supports two types of transaction
a.     Launching pages of People Centric CRM
b.     Launching BOR transactions of CRM or any remote SAP system
Path is IMGCRMInteraction Center WebClientBasic Functions Transaction Launcher Configure Transaction Launcher (Wizard)
Business Transaction Profile (Name should be in Capital)
Three standard buttons in the navigation profile navigate to the views of the CRM business transactions
a.     Interaction Record: - stores communication related data of communication channels.
b.     Sales Document: - includes quotations and order status and stores all sales items the customer wants to order.
c.     Service Document: - It represents the service aspect of a phone call.
The business transaction profile is controlling which CRM business transaction type is linked to the navigation bar buttons.
You can assign the interaction record and the sales or service transaction types in two different ways:
a.     A sales and/or service document will only be created if the agent presses sales and/or service in the navigation bar and makes entries to these documents.
b.     The sales and/or service documents will be saved as individual documents. Interaction record, sales, and service documents are stored by separate document IDs and are connected by the data flow.
Path is IMGCRMInteraction Center WebClientBusiness Transactions Define Business Transaction Profiles
Hope this helps
Regards
Rekha Dadwal

OBXR- Special GL Transaction Types - Modify Fields

Hello Gurus. We are on ECC 6.0 with New GL. Is there a way to modify which fields are available for the Special GL Transaction types in OBXR ? For example: In OBXR go to Properties. We selected Down Payment/Down payment request, later on when we enter a document via FB01 or FB50 or when we post a payment via F-28, and we select Posting Key 09 or 19 and use the Special GL Indicator we are able to display and enter information in BSEG-PRCTR (Profit Center field).
If on the other hand in OBXR we set up another Special GL Transaction type and we select Others, then BSEG-PRCTR (profit center field) is not even available, but we are able to enter BSEG-ZFBDT and later on modify this same field (BSEG-ZFBDT) via FB02.
I would greatly appreciate your guidance in how to modify/include additional fields in these Special GL Transaction types. Thanks!

Hi Enrique,
Are you referring to the document screen layout when you enter the document in the special GL transactions?
This is controlled by the field status of the posting key in question. Using transaction code OB41you can double click on the posting key (say 09) and inside you find something called as maintain field status. Clicking on the same, you will be able to see various groups under which you can make the necessary settings like optional/reqd/suppressed.
Thanks
Aravind

Copy Control for Transaction Types

Hi,
Was wondering if someone could help on following topic. We need to specify the possibility of copy control (follow-up) for certain transaction types in CRM 6.0. I've specified the source TT (ZAPP) and the target TT (ZCON) in customizing activity : Define Copying Control for Transaction Types.
ZAPP = Custom Appointment Activity
ZCON = Custom Opportunity
Now, when I want to create a follow-up for ZAPP in the WebUI (via dropdown 'More' and action 'Follow-Up'), I always get an extensive list of transaction types (about 30) rather than only the opportunity that I originally specified. Any ideas?
Thank you,
Sebastiaan.

Hi Kai,
Many thanks for your answer. Indeed, the COPY_DOCUMENT is a very good alternative as it also directs the flow for follow-up. However, I have a question in regards to using this method. I can see that there are parameters that need to be provided (like PROCESS_TYPE etc) but apart from that is it also possible to change fields in the copied document.
e.g. Currently the description of the copied document gathers the description of the action definition, but how can you pass the description of the previous document for instance? Is this also done via the actual parameters?
Thank you,
Sebastiaan.

Use of field - Transaction Type in F.01

Dear All,
Can anyone explain the use of field Transaction Type in Dynamic Selection in transaction code F.01.
If I have understood correctly, these are related to fixed assets. If I select any transaction type, say for instance 120, which is related to acquisitions, F.01 should display the related figures.
However, I do not get any display, inspite of having various transactions with transaction type 120.
Can anyone explain me why this is happening?

Hi,
I have gone into transaction f.01 and am unable to find the component Transaction type in dynamic selections. If however you want to find Transacttion type 120 use transaction SE16n and table ANEKPV add in the transaction types (technical name BWASL) add other parameters example company code, period etc to get the related information.
Award points if useful.
Sadie Gajanand

Locator area displays unauthoritative business transaction types

Hi,
I created a service business transaction type (ZXXX). Some users can see the details of this BT in the locator area (nearly all of the fields) although they have no authority for displaying. Indeed when they double click the relaited row for ZXXX, systems warns "There is no authorization for displaying...".
So i want they are not able to see these documents in the locator area.
Regards.
Sadi Yılmaz

Our system already had business area link to each plant.
However I don't think the business area value is defaulted from plant as a plant can be link to multiple business areas. Based on a plant, how do system determined which business area to be pulled to MIRO?
the business ares a is linked to the plant (and not the way back), that means from a plant you have always a unique busines area. This is set up in transaction OMJ7, pls have a look
We don't turn on the business area balance sheet (OB65). Would you please kindly advise what will be the impact to turn this on?
quite a lot... In this case don't turn it on, but that also means there won't be automatic derivation (whatever you customized in previous step)
One last question the enhancement LMR1M001 to derived the business area, from what data will system derive the business area (from vendor master, Purchase order or from where?)
it just depends on your coding, but basically you have the information in the exit, what you have normally in MIRO.
Would be good to know, what is your exact requirement, why you want to use business area in case of MIRO postings (and in case of other postings as well).

Transaction type field not copied into FLAGLFLEXT or FLAGLFLEXA

Dear all,
I would like to run a query on the transaction types used for posting line items. (initial balance, changes on the account, ending balance). However if I look into the totals table (new GL: FLAGLFLEXT or FLAGLFLEXA) I see the field transaction types present, but it has not been filled in.
Can anyone help me with finding a solution for this. Two possiblities:
1. How to get the transaction type into the totals table. The field is present, why is it not filled? Customizing?
2. How can I build a simple query from another table to see the transaction types used
Thanks!

The transaction type is there in BKPF, which you can use to link to FAGLFELXA. The common key is BUKRSBELNRGJAHR.

Transaction Type field not getting value in F-05 transaction

Hi All,
When ever we are doing a reverse posting for foreign currency valuation using F.05 Tcode it will create a BDC session where we can execute this batch Input session thru SM37.
This will use F-05 Tcode to post the the entries, but the problem is one of the field Transaction Type is not getting value for some of the GL account numbers range. This is totally SAP standard program take cares of it. Transaction type field value shuld be populated by '990' value for this GL account range, this is fixed. So is thr any User exit or Screen exit for this Tcode or how we can populate the value....
Help me...
Chandar
Edited by: Bala Chandar on Feb 12, 2009 1:25 PM
Edited by: Bala Chandar on Feb 12, 2009 1:28 PM
Edited by: Bala Chandar on Feb 12, 2009 1:33 PM

Hi Mr/Mrs Bala Chander,
I am having the same problem.
When running F.05 a BIM is created for GL account X. GL account X has a field status in which transaction type is defined as a required field because of BCS / ECCS. We have a substitution rule in place which should default the transaction type, based on several criteria. But when executing the BIM, I see that nothing is filled in field transaction type. Did you find a proper solution for your problem? Changing the field status is not an option in my opinion.
Regards,
Joep

How to add new fields to a table control in a standard transaction JHA3X

Hi All,
        We have a requirement where we have to add two new fields to a table control
        in a standard transaction JHA3X .
       We don't want any changes into our standard code and also we don't have any USER EXIT for that
       screen.
       Please provide with some solutions for the same .
       Thanks in advance .

You will need add this to the /var/clientlibs/libs/cq/security/widgets.js and add the field under the 'CQ.security.UserProperties'. For example, if you wanted to add a field to show the 'Middle Name' under the 'First Name' field, you can try adding the following:
            "items":[{
                    "xtype":"textfield",
                    "fieldLabel":CQ.I18n.getMessage("Login"),
                    "anchor":"100%",
                    "disabled":true,
                    "allowBlank":false,
                    "name":"rep:userId"
                    "xtype":"textfield",
                    "fieldLabel":CQ.I18n.getMessage("First Name"),
                    "anchor":"100%",
                    "name":"givenName"
                    "xtype":"textfield",
                    "fieldLabel":CQ.I18n.getMessage("Middle Name"),
                    "anchor":"100%",
                    "name":"middleName",
                    "xtype":"textfield",
                    "fieldLabel":CQ.I18n.getMessage("Last Name"),
                    "anchor":"100%",
                    "name":"familyName",
                    "allowBlank":false
Hope this helps.
-Ron

Data associated with Activity Type field in Costing transaction KP26.......

Hi,
In what table can I find relation between the Plan Activity and Distribution Key data assciated with a Activity Type field in Costing transaction KP26.
Please help.
Regards,
Rajesh.

HI,
Please check these notes.
86613
688883 Confirmation with price 0: Message BK057
645811 Confirmation with plan price 0: No costs in CO
Plese assign points if it useful.
Regards
Ravinagh Boni

Grey out / Display fields in BBPIV02 transaction

Hi,
What is best option to grey out/display some fields on Invoice BBPIV02 ?
Some of fields are from
1. Header level
2. Item overview
3. Item details
4. Search criteria screen etc
Any suggestions???
Regards,
Rahul Mandale

Hi,
   This is the sample code for Bid invitation screen fields:
*To make the TYPE OF PUBLICATION field under BASIC DATA tab in BI screen as display only
IF iv_fieldname = 'BBPS_BID_UI_HEADER-BID_TYPE'.
    cv_input_ready = c_space.
ENDIF.
*To make the responsible Purchasing organisation field display only
IF iv_fieldname = 'BBPS_BID_UI_HEADER-PROC_ORG'.
    cv_input_ready = c_space.
ENDIF.
*To make the responsible Purchasing Group field display only
IF iv_fieldname = 'BBPS_BID_UI_HEADER-PROC_GROUP'.
    cv_input_ready = c_space.
ENDIF.
*To hide the links for WEIGHTING and ANALYSES
IF iv_fieldname = 'SB_HWEIGHT'.
    cv_invisible = c_mark.
ENDIF.
HTH.
You can debug at runtime and see the structures and names for the fields/buttons as per the INVOICE screen.
BR,
Disha.
Pls reward points for useful answers.

Changing max row display in personalization of particular transaction type

Hi,
Is there any way to change the Maximum number of visible rows to be displayed in personalization of search result for a particular transaction type?
Thanks.

Solved myself.

How to display Transaction Type & description ?

Guys,
I am using CRM 5.0. When I am in CRMD_ORDER Transaction and try to create a new order, I get a pop-up list to choose my transaction types. However it only displays the description of the transaction type and does not give me the transaction ID.
Is there a way to display both in tow separate columns? For eg TSA Telesales

A.R.P,
see if this helps.
Click on Customizing of local layout on the standard SAP toolbar. (last icon with green red blue vertical stripes) 
From the context menu that opens, select the first option - options 
Go to the Expert tab and select the check boxes for :
 Show Keys in All Dropdown list 
 Sort Items by key 
Then choose the apply push button and then the ok button.
Julius

Display buttons by Transaction type and Roles

Hi Experts,
I have created a button in the BT115IT_SLSO/items view, using the DO_PREPARE_OUTPUT method. now I want to display this button only to a specific transaction type and business role, how can I achieve this. Tool bar related methods are not present for this view.
Thanks,
S Reddy

Hi,
This has been discussed in the forum already...
https://forums.sdn.sap.com/click.jspa?searchID=27175485&messageID=7619188
Re: Business Role of logged in user
Always search first and check if there is anything already discussed, this will save a lot of your time.
Regards,
Masood Imrani S.

Controling field display by Transaction Type

Similar Messages

Maybe you are looking for