Controlling the processsing of multiple IDOCS

Hi
Their is a situation where multiple IDOCS are coming from XI to SAP. Can anyone suggest the way in which we can control the processing of these IDOCs so that only one IDOC is processed at a time.

see:
http://help.sap.com/saphelp_sm32/helpdata/en/0b/2a6688507d11d18ee90000e8366fc2/content.htm
regards,darek

Similar Messages

How to control the opening form multiple times

Greetings to all,
I used Open_Form to open the form in my 'Menu.mmb'.
My Question is:
How we control the opening of a form from multiple times?
Ex:
In my menu.mmb I used OPEN_FORM.If we open the form,which was already opened ,I want to stop the form to open. How to do this?
Thanks,
Bhujendra

pls try with
FIND_FORM('EMPDETAILS1');
OPEN_FORM('C:\INH\EMPDETAILS1');
jeneesh

Control the visibility from multiples vi's

I need to control the visibility ('visible' property) of 3 controls (one flag and two intergers) from multiples vi's. Does anybody have a pratical example how to do it?
rgds,
Haroldo - Brasil
LV 7.0
Solved!
Go to Solution.

Hi Haroldo,
I would suggest to put this info into your signature, so you will never forget to mention this
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
visible_LV70.vi ‏16 KB

How do you control the volume of multiple audio tracks

Hi
I have about eight tracks of audio in my Finalcut timeline. When played, sometimes the music track will be much louder than the narration track or the FXs track will be louder than the all tracks.
How do I lower or raise the volume of tracks so that the track that needs to heard is heard.
I dont want to do an all out mix yet. I'm just building tracks
Thanks

Select all of your audio, go to the Modify > Audio > Apply Audio Normalization. It will bring all clips in each track to be the same level. Then, later, you can do your final mix much easier.
Or go to Window > Arrange > Audio Mixing and you'll have an on-screen mixing board to work with. There's a speaker icon in the top right, green keyframing is on while you mix in realtime during playback, gray, keyframing is off.
But use the first method first, for sure. Open the audio mixer after that, you'll save yourself a ton of work and time.
Message was edited by: BenB

Configuration scenario of file to multiple IDOCs in XI

I have to configure a scenario of file to multiple IDOCs in XI.
I have XML file in MDM server. And it contains multiple segments. Each Segment is a combination of DEBMAS and ADRMAS.
So in XI configuration I have to separate the mapping for DEBMAS and ADRMAS. And my ADRMAS idoc should post first in R3 and then DEBMAS should post.
These IDOCs are multiple because each segment in XML file will be a IDOC.
Does BPM process is mandatory here or we can do in any other way.
Could you please suggest how to do this configuration. If you have any documents pls share with me.
Regards,
Venkat

Hi,
First you need to split the messages into multiple IDOC types. As you are going to send this to IDOC adapter, it is required to have BPM to split the message.
These 2 docs may help u:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
Regards,
Moorthy

Controlling transition timing in multiple multistate objects

How can you control the timing of multiple multistate transitions in DPS? If you have two slideshows with a single button telling each to go to a particular state, the transitions go in sequence rather than simultaneously. Can you adjust the timing so each transitions at the same time and for the same duration?

At this time, you can't run two button actions simultaneously.

File to multiple idoc scenarios depending on finput field value

Hi,
i have a file to idoc scenario.
depending on a particular field of the file i have to trigger a single idoc (with all the records in the file)or multiple idocs (for each record in the file ).
for example,
the file has 5 records-
2 records have field value A (create 1 idoc for all As)
3 records have field value B (create 1 idoc for each B)
so in this case 4 idocs (1 for all A, and 3x1 for B) are created
What is the best solution ?-
1. to have several outbound idoc interfaces and check each interface mapping for field value (A or B) ?
this solution seems like overwork to me
2. handle this in mapping ?
in that case will UDF be better or ABAP mapping
3. any other way ?
Thanks in advance

Hi,
if you have one IDOC type you can use ABAP mapping
this way you will handle everything in tables
and you will be able to post one IDOC (bundled)
with all IDOCs inside
also if you use ABAP mapping you will be able to incorporate changes
easily in the future I believe
for idoc bundling:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Is it poosible to control the start date for an assort idoc on the erp sise

is it poosible to control the start date for an assortment list idoc on the erp sise

Hi rodeofive,
As per my understanding, the issue is a performance issue. And it is caused by there are thousands of values in the drop-down list of parameters in the report.
To work around this issue, I suggest you should make some changes in the report. For example, we can add additional two parameters with multiple keywords ahead, one for the dropdown contains 95k options, another for dropdown contains 24k options. Then all
of available values which are begin with the keywords will display in the parameter list. In this scenario, we can create cascading parameters. One is a keyword parameter, and the other parameter is the drop-down list that based on the keyword to display the
available values.
For more details about the method, please refer to the following FAQ:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/8de6c783-9cb4-4b95-9be8-b59bc0049866/forum-faqhow-do-i-add-a-search-feature-in-the-parameter-with-long-drop-down-list?forum=sqlreportingservices#8de6c783-9cb4-4b95-9be8-b59bc0049866
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

I have multiple email accounts on my iPad. How do I control the order in which the accounts are displayed?

I have multiple email accounts on my iPad. How do I control the order in which the accounts are displayed?

In landscape mode, the mailbox list is automatically displayed (in portrait mode, you will need to tap the button to,show it).
To edit the list, tap edit as shown below.

Has anyone ever successfully done a cont double buffer acq from multiple SCXI channels AND a spare AI of the MIO that controls the SCXI chassis at the same time?

I am trying do a sanity check before I order some hardware.
What I want to do is acquire from multiple channels in a SCXI chasis and as part of the same acquisition, also read from one of the "un-used" AI channels of the MIO card.
My concern is this:
All of the channels of the SCXI chassis get multiplexed down into a single channel of the MIO card that controls the SCXI chassis. This means that channel 0 has to do multiple A/D conversions to get a reading from all of the configured SCXI channels.
Meanwhile, the other AI channel of the MIO only has to do one to get it's reading. It seems that the on-boar
d clock of the MIO would have to run at two rates to be able to read all of my SCXI channels AND the other AI channel.
What I want to do:
I want to just configure a vitual channel for all of my SCXI channels AND one more for one "odd-ball" signal that is incompatable with all of the SCXI modules.
Then I just want to list all of my virtual channels when I configure and start my continuous double buffered acquisition.
I have successfully done all SCXI channels before, but I have never tried to use one of the un-used AI on the MIO at the same time. I have used the spare DIO lines previously, but that will not work in this app.
So...
If you have done this and it worked, I would greatly appreciate hearing about any special techniques that were used, etc.
Thank you for reading this question,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Jeremy answered here
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000007C40000&UCATEGORY_0=_30_%24_12_&UCATEGORY_S=0
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Has anyone ever successfully done a cont double buffer acq from multiple SCXI channels AND a spare AI of the MIO that controls the SCXI chassis at the same time?

I am trying do a sanity check before I order some hardware.
What I want to do is acquire from multiple channels in a SCXI chasis and as part of the same acquisition, also read from one of the "un-used" AI channels of the MIO card.
My concern is this:
All of the channels of the SCXI chassis get multiplexed down into a single channel of the MIO card that controls the SCXI chassis. This means that channel 0 has to do multiple A/D conversions to get a reading from all of the configured SCXI channels.
Meanwhile, the other AI channel of the MIO only has to do one to get it's reading. It seems that the on-boar
d clock of the MIO would have to run at two rates to be able to read all of my SCXI channels AND the other AI channel.
What I want to do:
I want to just configure a vitual channel for all of my SCXI channels AND one more for one "odd-ball" signal that is incompatable with all of the SCXI modules.
Then I just want to list all of my virtual channels when I configure and start my continuous double buffered acquisition.
I have successfully done all SCXI channels before, but I have never tried to use one of the un-used AI on the MIO at the same time. I have used the spare DIO lines previously, but that will not work in this app.
So...
If you have done this and it worked, I would greatly appreciate hearing about any special techniques that were used, etc.
Thank you for reading this question,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Jeremy answered here
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000007C40000&UCATEGORY_0=_30_%24_12_&UCATEGORY_S=0
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

RFFOEDI1 IDOC Control Header - How can multiple payments be included?

When running RFFOEDI1, instead of one payment within one IDOC Control Header (ST=Segment Header), we have a requirement to include multiple IDOC payments within one Control Header. How is this accomplished?
Thanks in advance, Scott

Hi Scott
Were you able to achieve what you wanted with heavy customization.
Regards
Wai Meng

How the Queue will be created to process the Multiple IDOC's into 1 Queue

Hi Sap All.
when i went into the Transaction code we14 and when the press F4 for search help in the field Queue Name it displays me the several queues with the Port referring to B0018(refers to PI Box) ,which means that the IDOC's will be sending to PI.
here my Question is how the Queues get created ,what is the Transaction code for creating the Queues in SAP-R/3 and how we we setup the SAP-R/3 Box in order to send multiple IDOC's into one queue.overall my question is how we wrok on Queues ?
could any body help me in driving me to the best way.
regards.
Seetharam.

If you have the drivers CD or the LV 6 installation CD, then you could try installing just the traditional DAQ drivers. I will do a search if I can find them...Good news, I found the drivers that you may need. Here is the link to download.
After you install it, look in the vi.lib folder for the DAQ folder and see if you have a dozen
.llb files. That is where you will find your missing vi's. You may also check into the LV2009 folder to check to
see if the driver got installed there. I think the driver only gets
installed for a single version and it might default to the latest at that time (I did not check which one it was).
In any case, look for the missing VIs in the \National Instruments\LabVIEW 2009\vi.lib\Daq\ folder. The VIs are contained in the .llb files so you
can't just search for them through Windows. Look in the AI.llb file using LabVIEW.
Here are issues that you may encounter. The link is to the DAQmx driver (I thought it was for traditional DAQ )
http://forums.ni.com/t5/LabVIEW/Error-10461-10008-DIO-Port-Config-Legacy-lvdaq-dll/m-p/947104
Someone with a similar problem. It won't help you, but kinda explains what you are going through..
http://forums.ni.com/t5/LabVIEW/Since-upgrading-labview-many-sub-vi-s-such-as-DIO-Port-Config-vi/m-p...
Although the recommendation in this thread is to use the same LV version and driver as the previous machine, we know it is not your case. Newer LV version... and maybe the latest Traditional DAQ drivers... May be worth reading:
http://forums.ni.com/t5/LabVIEW/An-error-occurred-loading-VI-AI-Group-Config-vi/m-p/734547
Traditional DAQ 7.4.4
http://digital.ni.com/softlib.nsf/websearch/E42B7A3564AB2F1A862572A7006D1564?OpenDocument

Split the IDOC into multiple IDOC if the IDOC has more than 500 records

Hi All,
I developed an outbound IDOC in which we are facing an issue.
There is some limitation on the maximum idoc size it can handle.
If number of records is more than 500, split the idoc into multiple iDoc's, e.g. if it would have 1300 records , the result would be 2 iDoc's with 500 records, and the last one would have 300 records
How can i acheive this.
Regards
Jai

Hi,
1) first you need to know which message type/Idoc type you are triggering.
2) Get the Corresponding processcode from Partner profiles(WE20/ WE41).
3) Then the look for prper user-exit in the related processing FM.
4) write logic to split the IDoc accordingly.
if no proper user exit available then copy the standard processing FM and need to all ALE related configurations.
Catch hold any ABAP expert in your team to do all these.
Suresh

Controlling the processsing of multiple IDOCS

Similar Messages

Maybe you are looking for