Controls access through program not proper

VIs developed in LabVIEW 6i has button controls whose T/F boolean values are controlled through program and the control is used as a button as well. When the same VI is run after installing DSC this button control values cannot be changed through the program.

Hi,
Can you please attach a sample VI which exhibits this problem?
Thanks,
Khalid

Similar Messages

Remote panel and selective control access through Security with DSC

Hi Everyone,
I looked around to see what labview had to offer concerning security of remote panel and all the solutions I've found only propose full access to a remote panel, or none. The login page is not an option for me as everyone on the intranet can access the remote panel for monitoring but not everyone can have control to the buttons on it.
With the DSC module, I can give securities to the different controls and it works great with the exe, if I log in or out, the controls appears or disapears. Unfortunately, with remote panels, those controls are always visibles. Furthermore, when I log in from a remote panel, all the other remote panels get logged in with the same username and priviledges. When I log out, same thing, it logs out all the other remote panels. So the last guy who logs in gives its priviledges to every one else who is monitoring the remote panel at that time. when he logs out, he logs everyone out. I used a reentrant vi hoping that this would solve the problem but it didnt.
I would like to do what my colleague does with Advantech without any problem. He has only 1 .exe is running on the server and whoever connects to it through webserver, just needs to log in and he has all the priviledges of an guest, operator, admin, etc.. with access to controls and features accordingly. All this without interfering with the other people using the remote panels. This colleague has always been doubtful about the capabilities of labview to do SCADA systems and uptil now, I've been able to prove him wrong.. please help me continue
There are workarounds, using remote desktop to the server instead of webserver but it definitely is not as practical for the client and it will need quite some work to to synchronise all the exes open from the differents sessions, through the use of shared variables, binding and securities.
Thank you for your help.
Solved!
Go to Solution.

Thank you very much for your reply Jordan.
The NI security info is on the server (local domain with groups and users), and the running exes as well. The remote panel is not supposed to be accessed by internet, at least not yet, but just by the computers on the network and thinkline computers who are directly connected to the servers. the remote panel is accessed through the simple url: http://serverip/Application.html
There is no problem with accessing the remote panel of the exes on the server from another computer on the network. But there are several security issues when logging in and out with the NI Security Programmatic Login and logout VIs through the remote panel..
The 1st problem occurs when several people access the remote panel at the same time. In my setup, everyone is allowed to check what's happening on the front panel of the running exe, go through the tabs, check the graphs, the tables, etc.. , but only the administrators and the operators can send commands to the machines and the production line through this remote panel. Hence some buttons are accessible to all users, while others are only accessible depending on the privileges of the person logged in.
So like I said in the 1st post, I configured some buttons to be accessible only by the users of the admin group. When the exe runs, it's perfect, if I log in and out with an admin account, the buttons appears and disappear accordingly. But when I check the remote panel, those admin buttons are always visible, even if I am logged in as a guest or even logged out. Is it because the remote panel only needs minimum runtime engine and doesnt use the dsc runtime engine? if so, any work around?
Furthermore, another big problem is that if I login as an admin in one remote panel, then login as an guest in another remote panel, and then logout back from the first remote panel, it says: "User Domain/Guest logged out". Hence, my second login logged out my first user. I can actually see the admin buttons appearing and disappearing on the exe when login as admin and guest from the different remote panels.
So that's it, I would like my remote panel to behave like a normal scada system, with one exe running in the back (on the server) and with all the users accessing it through web server. Several users might/will access the remote panel at the same time and each of the users have a login/password that grant some of them the privileges to take some actions while giving the others only monitoring rights.
I hope that I have been more clear in this 2nd post,
Thank you again for your time.
Best Regards,
Tom.

ABAP MS Access connection program not running in SM37

hie gurus ,i really need your help. i have created a program to extract data from an Ms Access database at certain intervals.
the program runs well if you execute from the ABAP workbench. How ever if i schedule it as a back ground
process its not finishing processing , it remains active through out. i can process it via debugger JDBG in SM37
but on its on it remains active status. the OLE objects i am using are as follows(they):
DATA: conn      TYPE ole2_object,
      rsdb      TYPE ole2_object,
      sql        TYPE c LENGTH 2000.
CREATE OBJECT conn 'ADODB.Connection'.
CREATE OBJECT rsdb 'ADODB.Recordset'.
CONCATENATE 'Provider=Microsoft.Jet.OLEDB.4.0;'   'Data Source=D:\Documents\ Wm.mdb;'
INTO sql.
CALL METHOD OF rsdb 'OPEN'
    EXPORTING #1 = sql
    #2 = conn
    #3 = '1'.
DO.
    CALL METHOD OF rsdb 'getstring' = sql
    EXPORTING #1 = '2' "Do not modify!
    #2 = 1    "Do not modify!
    #3 = '|' "Do not modify!
    #4 = '|'. "Do not modify!
    IF sy-subrc EQ 0.
      REFRESH it_temp.
      SPLIT sql AT '|' INTO TABLE it_temp.
      LOOP AT it_temp INTO wa_temp.
        CASE sy-tabix.
          WHEN 1.
            wa_prd-field1 = wa_temp-value.
          WHEN 2.
            wa_prd-field2 = wa_temp-value.
          WHEN 3.
            wa_prd-field3 = wa_temp-value.
          WHEN 4.
            wa_prd-field4 = wa_temp-value.
          when others.
        ENDCASE.
      ENDLOOP.
      APPEND wa_prd TO it_prd.
      CLEAR wa_prd.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
FREE OBJECT conn.
FREE OBJECT rsdb.
thanks in advance.

Dear bhaskar:
Thanks for your reply. We have considered balancing the system to the other node or reboot the system to free resources, in order to re-create the shared memory, but in the past, the balancing process (move resources from one node to the other) has caused problems. Since this is a critical system, stopping (or balancing) is not an option right now, and updating the kernel requires an ABAP stack reboot plus the kernel change : any changes in system configuration requires a longer approval/planning process than a reboot.
Moreover, the OS collecting system and its display in OS06/ST06 has worked fine until now.
Does anyone knows if a reboot has solved this kind of problem in a similar situation?
Thanks in advance
José Enrique

Firefox hangs and will not allow me to access other programs running when I resize a pop up window, move a pop up window, accidentally right click flash content.

Firefox hangs and will not allow me to access other programs running when I resize a pop up window, move a pop up window, accidentally right click flash content.
== This happened ==
A few times a week
== Not sure when it statrted

Hi.
When this happens, please press CTRL+SHIFT+ESC and see how much RAM and CPU Firefox is using. If they're sky high, then... Well, that kind of issues are, unfortunately, more common and the we'd like. Thankfully, 99% of the cases are very easy to solve. However, you do need to diagnose what your exact problem is. Do this:
#run Firefox in safe-mode to disable all extensions and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
#update all extensions and plugins in your Firefox. If this doesn't solve the issues, proceed to the following number;
#disable all extensions and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
#enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. When you encounter the problems, you know you've found a problematic extension, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
#you're done! You've fixed your problems with problematic add-ons.
Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
#do a virus/malware check on your computer. If this doesn't fix it, proceed;
#disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix you issues with Firefox, proceed;
#check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
#check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't do it, I'm out of ideas. Except make sure you've followed my instructions correctly.

How to save Custom control records through module pool program ?

Hi guru ,
1. How to save Custom control records through module pool program ?
I wrote multiple lines of record in custom control
Who to save that records ?
thanking you.
Regards,
Subash.

Hi,
can refer following code -
IN PAI , CODE is as follows-
*&      Form editor_output
FORM editor_output .
NARRATION1 is name of custom controller
IF v_editor IS INITIAL.
Create obejct for custom container
    CREATE OBJECT v_custom_container
      EXPORTING
        container_name              = 'NARRATION1'
      EXCEPTIONS
        cntl_error                  = 1
        cntl_system_error           = 2
        create_error                = 3
        lifetime_error              = 4
        lifetime_dynpro_dynpro_link = 5
        OTHERS                      = 6.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Create obejct for the TextEditor control
    CREATE OBJECT v_editor
      EXPORTING
        wordwrap_mode              = cl_gui_textedit=>wordwrap_at_fixed_position
        wordwrap_position          = line_length
        wordwrap_to_linebreak_mode = cl_gui_textedit=>true
        parent                     = v_custom_container
      EXCEPTIONS
        error_cntl_create          = 1
        error_cntl_init            = 2
        error_cntl_link            = 3
        error_dp_create            = 4
        gui_type_not_supported     = 5
        OTHERS                     = 6.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
ENDFORM.                    " editor_output
getting textdata in internal table as follows
*&      Form create_text
FORM create_text .
REFRESH : it_texttable,
            it_text.
IF v_doc_number IS NOT INITIAL.
    IF v_editor IS NOT INITIAL.
      CALL METHOD v_editor->get_text_as_r3table
        IMPORTING
          table                  = it_texttable
        EXCEPTIONS
          error_dp               = 1
          error_cntl_call_method = 2
          error_dp_create        = 3
          potential_data_loss    = 4
          OTHERS                 = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
Now, our final text data is in internal table it_texttable.
pls, Reward if found helpful.

I can no longer edit the info for my songs, movies and tv shows. This occurred since I loaded Windows 7 Pro on my C drive, and then fownloaded ITunes 10. Why will the program not allow me to access the track info to edit it?

I can no longer edit the info for my songs, movies and tv shows. This occurred since I loaded Windows 7 Pro on my C drive, and then fownloaded ITunes 10. Why will the program not allow me to access the track info to edit it?

Ah yes school boy error there out of frustration and discontent..
My issue is with music/apps/films etc not downloading from iTunes / App Store.
They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
Anyways I digress.
So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
At frustration station waiting for a train from pain...
All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
Answers in a postcard :-)
Much love

Access Policy is not getting trigggered after creation of user through GTC

Hi,
I have an access policy for ALL USER role and that provision users to an RO after getting created in oim. I have a trusted source flat file reconciliation GTC for user creation. I am facing issue when user is getting created through GTC, access policy is not getting triggered. But while creating an user through web console the same access policy is working fine and user is getting provisioned with RO.
If anybody have any idea how to resolve this, please help me in this regards.
Regards,
Avijit

Hi ,
its good to know that its working. As per my experience it works for once (through reconciliation) but then stops working. Now to confirm try to revoke the user by changing the group member-ship through reconciliation and see if the resource is revoked or not (repeat it for 2 -3 times). Note that don't do it form within IDM web admin console, do it through reconciliation.
do post your results.......
Regards.

Photoshop Elements 10 deinstallation, program not in system control (windows 7 64-bit)

Hello,
maybe I oversaw the right answer, but I was searching for hours now and so I opened this "new" issue.
Several weeks ago I installed a full version of photoshop elements 10 on the 64 bit windows 7 system of my father and it worked fine.
Today my father treid to restart the program but could not find the icon, so i started the program by starting the exe-file in the photoshop folder. but the image processing and the organizer did not work. An error message recommended to download and refresh the application manager. I was not willing to do so so I decided to reinstall. By trying to reinstall the installation told me first to uninstall the existing version but there is no photoshop found in the system control also there's no uninstall file in any photoshop folder, so how to handle.
After downloading and refreshing the application manager now everything seems to run properly but I'm not satisfied becaus I don't understand what's ongoing on the system. Still I cannot find a photoshop installation in the system control. How can I reinstall if another problem occures if I cannot uninstall.
Please help me to gain a little more knowledge to handle those problems in future.
So the primary, cebtral question is: why can I not find a photoshop installation in the system control and how to deinstall photoshop in this case to reinstall it????
Thanks a lot for any hints,
kind regards,
Jörg

Hello,
When you install any version of PSE <say PSE11>, the applications gets installed at (on 64 bit machines)-
Organizer: C:\Program Files (x86)\Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe
Editor: C:\Program Files (x86)\Adobe\Photoshop Elements 11\PhotoshopElementsEditor.exe
Welcome screen: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Adobe Photoshop Elements 11
Note: On 32 bit machines, applications will be located inside Program Files instead of Program Files (x86).
Also when the installation is successfull, you will see the uninstaller present in Control Panel\All Control Panel Items\Programs and Features.
As per your case, you are unable to uninstall PSE11. For doing so, download the cleaner tool from: http://www.adobe.com/support/contact/cscleanertool.html.
Follow the guidelines listed on page. Once the clean up is successful, you can install PSE. I would recommend to install PSE using 'Run as Admin' (right click the setup.exe and click 'Run as Administrator'.
Do let me know if you face any issues.
~Andromeda

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding",

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding", i tried network reset, reset the whole device, rebooting , changing airplane mode rebooting nothing fix the issue, but i can access other sites and google , am using Vodafone as my carrier with 2g network, when at home able to access facebook.com through wifi in safari requesting assistance thank you

If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier. You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

I used to look my photos in my tv using apple tv, now i can't when i access through apple tv/ computer/ my library photo option is not available, i check home sharing and which photos i'm sharing from my mac/itunes but i still can share photos w/apple tv

I used to look my photos in my tv using apple tv, now i can't when i access through apple tv/ computer/ my library photo option is not available, i check home sharing and which photos i'm sharing from my mac/itunes but i still can share photos w/apple tv

Morning JJFH,
Thanks for using Apple Support Communities.
If after setting up Home Sharing, you cannot access your shared iTunes library over your home network from your Apple TV, take a look at this article:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Best of luck,
Mario

Not able to access CAS service through Endeca workbench: getting an error "CAS Console must be accessed through Workbench"

Getting an error while accessing the Datasource tab through Endeca workbench "CAS Console must be accessed through Workbench". Verified both ws-extensions.xml and casconsole.properties files which exists under %ENDECA_TOOLS_CONF%/conf, both files shares the same sharedSecret. Do anybody knows how to resolve this issue.
I did tried to reinstall CAS component multiple time , all the time the same error throwing.
Endeca CAS service is also not able to start through microsoft console (services.msc) throwing an error " Windows could not start the Endeca CAS Service service on Local Computer"

This can occur if CAS is reinstalled. Check your ws-extensions.xml and casconsole.properties files, and ensure that they agree on the same shared-secret.
Best
Brett

I contacted what I thought was Brother Support for my new printer, then I got skeptical. He gained access through a program called TeamViewer, is my Mac safe?

i contacted what I thought was Brother Support for my new printer, then I got skeptical. He gained access through a program called TeamViewer, is my Mac safe?

They're probably just interested in getting $ from you, there are several companies who advertise in a way that suggests 'official' support for all sorts of things. Unfortunately, if they had access as you describe, they potentially could have installed other software and/or read any of your files.
Ideally - change all passwords for email/banking/login & restore a backup from before this happened.

When messaging server is accessed through mobile, then I am able to reply a mail but I am not able to compose a mail.It gives server error.

When portal server's mobile access pack is accessed through nokia7110 handset simulator then while checking mails I am able to send mails through reply link in inbox but I am not able to compose mails. It gives 'server error'.Please help me out.

Gurmeet,
A couple of questions :-
a. Is this unique for your Nokia browser ? i.e.
are you able to select "compose" using other
simulators?
b. Does your installation also have iPlanet
Messaging server/iPlanet Calendar Server?
c. Have you configured address book correctly ?
You might be seeing this problem if you have not
configured the address book correctly.

I am creating webpages with frontpage and trying to make collapsible lists. The lists collapse and work correctly in "preview" mode, but do not work when accessed through firefox or explorer 8. Does anyone know what I am doing wrong?

I am creating webpages with frontpage and trying to make collapsible lists. The lists collapse and work correctly in "preview" mode, but do not work when accessed through firefox or explorer 8. Does anyone know what I am doing wrong?

Welcome to the 'wonderful' world of HTML5 e-learning.
In my view, from the issues I am seeing everywhere, HTML5 output from rapid e-learning tools such as Captivate is not ready for the kind of mobile device e-learning you want to develop.
Sorry to be pessimistic, but you may need to consider going back to the drawing board and coding it from the ground up.

My ipad and iPhone are not syncing and not letting me access through facebook

My ipad and iPhone are not syncing and not letting me access through facebook

Your question doesn't make sense. Facebook has nothing to do with syncing an iDevice. Explain your problem if you want an answer.
 Cheers, Tom

Controls access through program not proper

Similar Messages

Maybe you are looking for