Conversion Agent for XI 7 on Linux
Dear All,
We want use conversion agent software in our XI 7 server which is on Linux. Can anybody let me know what are the majoir steps that I should do.
I have searched SDN but all the installation information are based on Windows.
Ours is a linux server and please let me know how can I install the engine on Linux server.
Warm Regards
Mazdul
[email protected],
Hi Bhavesh,
I deployed the required files through SDM.
Then in the step "Installing the Conversion Agent Software on Unix mentioned in the guide" it is mentioned
"Find the Conversion Agent setup file. The file has a name such as
Setup_uuu.bin, where uuu is the name of the Unix flavor. It is located in the
Conversion Agent subdirectory of the SAP XI repository, for example:
/usr/sap/J2E/SYS/global/Conversion Agent/Setup_linux.bin"
I found the file. Then it says to execute the *.bin file. Here I got stuck. Is it ever possible to execute a .bin file ??????? I tried several ways like changing the permissions but it did not work and I am unable to execute the file.
My question is
Is it at all required to run the .bin file?If yes how can i do it...Or is it just deploying the required sda s is good enough??
Please help.
Warm Regards
Mazdul
Similar Messages
-
SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support
Hello
I have read that some people were able to run SAP Conversion Agent on a PI 7.1 EHP1 Installation on Windows 2008 Sever. But in the Product Availability Matrix there is no support for 2008 yet.
In the SAP Library (http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm) under the release notes for SAP Conversion Agent there is still version 8.5, but when I install the actual Support Package I have Conversion Agent 8.6 running and according to information on the informatica.com site this version is running under 2008!
Has anybody clear and actual information about which OS the newest SAP Conversion Agent for PI 7.1 EHP1 supports? Or has anyone experiance on Conversion Agent and Windows 2008 Server?
Thanks
ChristophHi Mark
Thanks for your reply! Fact is that in the actual Package (SP06) the version of Conversion Agent Engine supplied is not 8.5.5 as in the SAP Note mentioned, it is version 8.6.0:
C:\Documents and Settings\pi1adm>CM_console -v
Engine-Version: 8.6.0(Build:30)
Engine-Syntaxversion:4.00.10
I will oben a ticket for that ...
Regards
Christoph -
Oracle EBS agent for Oracle Clusterware or Linux Cluster
Hi,
Is there cluster HA agent available for Oracle EBS on Oracle cluster-ware or Linux Cluster?
Regards,
IqbalHi Iqbal,
Oracle clusterware has bundled agents available for Oracle GoldenGate, Siebel, Apache, Peoplesoft and MySQL.
http://www.oracle.com/technetwork/database/database-technologies/clusterware/downloads/ogiba-2189738.pdf
-Natalka / Oracle -
Conversion Agent - Help for scenario.
Hi Experts,
We are working on Conversion Agent for EDI - XI - IDOC, creating Parser in Conversion Agent, when we are using the same in Communication Channel, the file is not picked up from EDI Folder.
It is giving us one error "Error: java.lang.NullPointerException".
May be we are not creating the complete scenario and making some mistake in the scenario.
We have read many blogs and threads on SDN, but it is not making any help in our condition.
If anybody have complete scenario with screen shot, please give us that as it is urgent.
Please help,
Regards,
Study SAPHi Lawrence,
Thanks for your reply,
There is only one project and at CMD when we are trying to run it is running fine,
in the result is creating XML Message.
we have these errors in our Communication Channel Monitoring :
Transformation failed; CMException: Failure while trying to create engine log C:/Documents and Settings/Administrator/Application Data/SAP/ConversionAgent/CMReports/Init/Events.cme- for more information see file://internal
Attempt to process file failed with com.itemfield.contentmaster.CMException
Is the problem related to our project or with our deployment ?
Please help,
Regards,
Study SAP -
Error in XI while using standard EDI Libraries of Conversion Agent
Hi,
We are planning to use conversion agent for EDI to XML conversion using standard libraries.
Right now working on EDI 867 and is working fine in my local system. But when we moved the contents
to XI server, we are getting the following error
*ConversionAgent/ServiceDB/TS_867_Product_Transfer_and_Resale_Report_Parser/TS_867_Product_Transfer
andResale_Report_parsers_segments.tgp(547): is_optional is not a known profile or PT*
Can anybody help us to solve this issue?
Regards,
RaviHI,
The module name must be localejbs/sap.com/com.sap.nw.cm.xi/CMTransformBean.
The parameter name must be TransformationName.
The parameter value must be the conversion agent project name deployed in serviceDB. In the above example, the Tutorial_3 project from the documentation in step 1 is used.
And also it was failed to update the log.See the folder access onceagain.
many links provided in that blog itself ,plz check.
Regards
Chilla.. -
Conversion Agent Environment Variables.
Hi Experts,
We are using on Conversion Agent for converting EDI file data into XML.
Using Parser for this.
The problem is related to Enviornment Variables to be loaded on XI Server.
What will be the environment variables for this purpose and what will be the value for the same.
I have loaded three Environement Variable on XI Server for Conversion Agent,
1. CLASSPATH - C:\Program Files\SAP\ConversionAgent\api\lib\CM_JavaAPI.jar
2. IFCONTENTMASTER_HOME - C:\Program Files\SAP\ConversionAgent\
3. Path - C:\Program Files\SAP\ConversionAgent\bin
Are these entries correct ? Please help.
When I am using
To use the remote support interface:
1. In Microsoft Internet Explorer, version 6.0 or higher, browse to
http://HOST:PORT/CMViewer
Selecting Event : View Initialization Events, it is giving me an
error : Event file not found!
Selecting Event : View Execution Events, it is not showing any Date in
Date field and not showing any service in Service Field and Next
Pushbutton is also disable.
What is the problem ? Please help.
Regards,
Study SAP.Yes it shows up after restart of BIDS .
But during design time this is a bug I hope Microsoft fixes this bug in the future releases
Mudassar
It's not really a bug. Visual Studio loads the environment variables when starting up.
In future releases you use projects and parameters instead of environment variables, so the issue goes away ;)
MCSE SQL Server 2012 - Please mark posts as answered where appropriate. -
Conversion Agent Error - CMException
Hi ,
We are trying to map an excel file to another system using conversion Agent for transformation. We have created the transformation in the Conversion Agent Studio and deployed the service in our integration engine on XI Server(in the serviceDB folder).
But the file is not getting transformed and the message is failing in the communication channel only giving the below errors . ( Runtime WorkBench - > Communication Channel monitoring ) .
The source file is getting picked up from the respective folder where it has been placed, and also the TransformBean is being called too.
"Attempt to process file failed with com.itemfield.contentMaster.CMException".
"Transformation failed : CMException : Failure while trying to create engine log .
D:/ConversionAgent/Log/Init/Events.cme"
Please let us know what parameters we have missed out due to which we are getting this error.
Thanks
SatishHi refer this link may be helpful
have a look at the following(page 8 for conversion agent)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9913a954-0d01-0010-8391-8a3076440b6e
/people/alexander.bundschuh/blog/2006/03/14/integrate-sap-conversion-agent-by-itemfield-with-sap-xi
/people/paul.medaille/blog/2005/11/18/conversion-agent-a-free-lunch
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield- [original link is broken] How To Get Started Conversion Agent
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
http://help.sap.com/saphelp_nw04/helpdata/en/43/6f3f4347336fc9e10000000a1553f6/CMSap.pdf
in this document:
http://help.sap.com/saphelp_nw04/helpdata/en/43/6d960dac846fcbe10000000a1553f6/CMAdminGd.pdf
To check with your installation and configuration refer following blog
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
Thanks!!
Pls reward if useful -
Conversion Agent and the module processor
Hi,
i have to make an offer for a client of ours. Therefore i was thinking to propose the conversion agent for developing a process module into the inbound communication channel in the XI-Scenario.
But i think i understand sth wrong or does this module substitute the normal mapping inside the XI?!
Can someone give me a hand?!
thx in advanceJens,
Conversion Agrent is used to convert non XMl data into XML and vice versa.
For example it can read a PDF, EXCEL and conevrt it into XMl and also convert XML into EDI formats etc etc.
You use the conversion agent studio to develop the conversion mapping and then deploy it as a module. From the comm channel you call the Conversion Agrent Module which in turn runs on its own Engine and does the conversion for you.
So, if possible, you can also use conversion agent to actually read your source and create iyt in the format of the target and thgerbey replace Mapping. But, it all depends on the feasibility of what you are trying to do.
Regards,
Bhavesh -
Conversion Agent - EDI Parser Problem
Hi Experts,
We are writing a parser for EDI message type 850.
When we are giving Repeating Group and Marker "ST", it is taking more fields also, having this value "ST", which are in other Segments other then ST.
and reading that ST fields as a segment,
the output data is not correct due to this problem,
Please help,
Regards,
Study SAPHi VJ,
thanks for your reply,
We are writing this Parser at Conversion Agent for EDI 850 & 856, X12 Version 4030.
The example file for the problem is here :
ST/856/00001~
BSN/00/013721/20070806/1808/0001~
HL/1//S~
TD1/CTN25/17////G/198/LB~
TD5//2/HRMN/M/HERMANN TRUCKIN~
REF/BM/67450800000020664~
REF/CN/125173569~
REF/PUA/125173569~
PER/IC/dan/EM/[email protected]~
DTM/011/20070806/1807~
N1/ST//92/93922~
ST is a segment, when we are going to give this as Marker in Repeating Group, it is picking ST of N1 Segment also.
'/' is seperator for fields and '~' is seperator for lines.
Regards,
Study SAP -
Conversion Agent - (EDI - XI - IDOC) - Help
Hi Experts,
I am working on the scenario (EDI - XI - IDOC) using Conversion Agent for Converting EDI data into XML.
I am facing many problems in Real Time, can any one who has already worked on the same scenario send me complete scenario with screen shots,
I need immediate help, really it is very urgent for me.
Regards,
Study SAPHi Kishore,
Thanks for your reply, We are using Standard IDOC Orders05 and EDI message ANSI X12 - Message Type 850 for Purchase Order.
Posting EDI Data of Purchase Order in R/3 Sales Order as INBOUND Message.
Using Conversion Agent Parser for the same and deployed this project at Integration Server in ServiceDB Directory.
The Conversion Module CMTransformBean is also deployed at XI Server.
When we are puting file at FTP Server, our XI System is not picking up file while using Conversion Agent Module,
while it is picking up without conversion module successfully.
Please help,
Regards,
Study SAP
[email protected] -
Help for Using Itemfeild Conversion Agent
Hi all,
i have read several blogs and formus on the use of Conversion Agent software for performing EDIXML To EDI format conversion. Here is the problem i have.
we are doing an IDOC to File scenario and in the Filesender adpater we need to configure and module which does the necessary conversions(EDIXML to EDI-834). I created an Serializer using Content Master Studio and deployed the project to the Content master Engine on the XI server. When i give the transformation paramters which are mentioned in the blogs below
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/alexander.bundschuh/blog/2006/03/14/integrate-sap-conversion-agent-by-itemfield-with-sap-xi
SAP Conversion Agent
There are no erros shown in the SXMB_MONI or either in the Adpater Framework, but the target file is not being created. can anyone please advice me about how the module name should be set in the File Adpater(SP 17) and how can i check the erros in the conversion module in XI.Julie,
Can you please pass the information if you have resolved the problem?
Ravi -
Does Veridata have Agent for oracle database 11gr2 on linux?
Hi,
Does veridata have agent for oracle database 11gr2 on linux? From the edelivery.oracle.com, I just found the latest version is 10.2. When I installed the 10.2 version agent for oracle database 11gr2, the agent needs libnnz10.*. Does 10.2 version agent support for 11gr2 database? Thank you.http://www.oracle.com/technetwork/middleware/goldengate/downloads/index.html
PS: Google still works. ;-) -
hi,
i read many blogs stating that i can use item fields conversion agent to convert edi into xml. I also read(/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield) in this page that i can get the appropriate downloads for my operating system in service.market place.
But actually there is NO option or download available for LINUX X86 32 bit OS.
They only have for LINU X86 64 bit OS.
Can i download and install the same for my 32 bit operating system.You are right the only option available is 64bit and I think you can try and install the same. I have not tried myself though.
-
Sender Mail Adapter with SAP Conversion agent
have some1 used SAP conversion agent on attchment from XI Sender Mail adapter?
it seems to ignore the attchment of the e-mail
the sender configuration module tab is as follows :
1.localejbs/AF_Modules/PayloadSwapBean transform
2.localejbs/sap.com/com.sap.nw.cm.xi/CMTransformBean CM
3.sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail
The paramters are
transform swap.keyName Content-Disposition
transform swap.keyName Content-Description
transform swap.keyValue attachment
transform swap.keyValue codeco
CM TransformationName ZIM_CODECO_VALIDATIONS
The Convesion Agnet runs prefectly when using the Conversion Agent engine
thx,Shai Rosenzweigcheck with tis may helpful for you
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
Regds
Abhishek -
Help required regarding Integrating Conversion Agent with SAP-XI
I want to run a simple File to File scenario which involves integrating conversion
agent. I gone through a webblog:Integrate SAP Conversion Agent by Itemfield with SAP XI
I deployed the module and I configured the channel in the same way what was specified in the webblog.
But when I run my scenario I found CM_TRANSFORMATION_ERROR as the error in communication channel monitoring.
Can u please provide me the solution for correcting the above error, this would be a great help for me..HI,
see the below links
http://help.sap.com/saphelp_nw04/helpdata/en/43/6f1f39a08e6fcae10000000a1553f6/CMSUserGd.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/ee/c9f0b4925af54cb17c454788d8e466/frameset.htm - cc
http://help.sap.com/saphelp_erp2005vp/helpdata/en/95/bb623c6369f454e10000000a114084/content.htm - fcc cOUNTER
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
with item fiels.
Regards
Chilla
Maybe you are looking for
-
Trying to create dual boot with Windows 7 on Yoga 11s
I was trying to install Windows 2008 server (I said Windows 7 in the title because it's essentially the same) on a Yoga 11s in dual boot configuration with the factory-installed Windows 8 upgraded to 8.1, and as expected it's a pain in the butt. I r
-
Load balance traffic to a service based on a added field in the HTTP Header
I am trying to use HTTP Header Load balancing but the field we want to use in order to load balance is "user-defined", example HTTP_TOTO = toto1. Do you have any idea on how I could perform this ? Thanks in advance
-
hi, i've got a question: I'm looking a method in JTextField class similar to the append() in JTextArea. I need to add a new chars to the end of my text in TextField. The method setText() doesn't work - it always clear the field and set the text at th
-
Distributed Queue - Unable To Load Balance Between Each Time A Send Method Is Called
Hi, According to the JMS documentation, I should be able to get the distributed queue to load balance between each time the message producer calls Message.send(). I was not able to achieve this, however,
-
Problems after clean install of 10.4
I installed 10.4 finally yesterday. I left my songs on the iPod, but nowhere else. Now the computer tells me that the iPod is linked to my old setup. I can't see a way of making it link to my computer with the new OS. Any ideas? (3rd Gen iPod)