Conversion Exit/Routines for Project ID

Hello All,
I am from the BI forum.
I would like to have conversion exit for Project ID, The Problem i am facing in BI is, that in my BI report , the project iD displays in internal format , but i need in External format.
For Ex the Project ID in Master data is P000291 but it displays as 0002189, which is wrong.
I have found routines like CONVERSION_EXIT_ABPRJ_OUPUT,.
I have also written a code in my BI system, also, but it still it shows me the internal format.
The Source field is PSPID coming from PROJ table.
I need to know the list of conversion routines for Project ID,,(to Convert Internal to External format).
Thanks and Regards

use the below FM "CONVERSION_EXIT_ABPSN_OUTPUT"

Similar Messages

How to find conversion exit MATN1 for the field MATNR

Hi Friends !
I want to run the infopackage with selection on material. But when put some value in the infopackage selection screen, it says "cannot find conversion exit MATN1 for the field MATNR".
Ques is how to find where this conversion exit is written? Will it be written in ECC side or BI side?
Source System Datasource : 0MAT_SALES_ATTR
InfoObject in BI : 0MAT_SALES
With Regards
Rekha

HI ,
It will be available in the BI system itself as FM , you can find them in TCODE : SE37 --> provide the converstion exit name
with star on both sides like MATN1 and press F4 key , every convertion exit will have two FM s , one for INPUT and
one for OUT put , you can try the Test Run ofFM to check how it works
For MATN1
CONVERSION_EXIT_MATN1_INPUT
CONVERSION_EXIT_MATN1_OUTPUT
Regards,
Sathya

How to find out the conversion exit format for VBRP-VRKME

Hi Gurus,
           I am writing a report to fetch delivery details based on storage location'123'. My requirement is tat i shud convert the Billed Quantity unit TO Base unit of measure. In my VBRP table the field value/contents of VBRP-VRKME have values PAK for PAC( packets) and KAR for CAR(carton). When i click on User-specific Settings - - Check the filed CHEECK CONVERSION EXITS , i am able to get see the PAC and CAR respectively.
      But unfortunately when i selecting te fields form vbrp in my internal table i am getting the values 'PAK' for PAC and 'KAR' for CAR'. AS i am writing a report can any one suggest me how to convert this , as i wud b making use of FM MD_CONVERT_MATERIAL_UNIT to convert to base unit of measure, n this FM is not accepting the values like PAK and CAK.
      Your Sugesstions are of utmost importance for me.
Thanking you,
ZIa

Hi,
Conversion routines are maintained at Domain Level(Definition Tab), Meins is the domain for VRKME data element.
You have to use the following routines,
CONVERSION_EXIT_CUNIT_INPUT
CONVERSION_EXIT_CUNIT_OUTPUT
Regards
Srini

User exit/routine for post goods issue

Dear all,
I want to stop printing of delivery chalan from a replinshment delivery before post goods issue /actual goods movement.Can anuone suggest me for some user exit or routine that stops printing of delivery chalan from a replinshment delivery(VL10B) untill the post goods issue takes place in stock transfer scenario?
Is there any possibility to put some routine in the output of delivery chalan which displays a message that printing of delivery chalan is not possible since post goods issue has not taken place & system do not allow the printing from replinshment delivery unless PGI tales place in stock transfer scenario.
I will be highly greatful to you.
regards
vikas chhabra
[email protected]
[email protected]

Dear all,
I want to stop printing of delivery chalan from a replinshment delivery before post goods issue /actual goods movement.Can anuone suggest me for some user exit or routine that stops printing of delivery chalan from a replinshment delivery(VL10B) untill the post goods issue takes place in stock transfer scenario?
Is there any possibility to put some routine in the output of delivery chalan which displays a message that printing of delivery chalan is not possible since post goods issue has not taken place & system do not allow the printing from replinshment delivery unless PGI tales place in stock transfer scenario.
I will be highly greatful to you.
regards
vikas chhabra
[email protected]
[email protected]

Custom Conversion Exit for a Custom InfoObject

Has anyone created a custom conversion exit for an InfoObject?
I have a requirement to mask the first five digits of the Social Security Number on output only. I created a custom conversion exit ZCONV, for example and added code to the output function module CONVERSION_EXIT_ZCONV_OUTPUT to accomplish the masking. In the CONVERSION_EXIT_ZCONV_INPUT, I just passed INPUT to OUTPUT.
It works OK for masking the output results but any input variables return an "Invalid Format" error. So I am not able to have a selection screen variable where you enter the SSN number and run the query for it. It tries to convert it to the masked form and then run the query.
Any pointers. Helpful answers will be promptly rewarded.
Thanks
Vineet

Since the ultimate goal was not to display Social Security Numbers, I changed the custom Conversion exit to display SID values. In case anyone needs to do the same, The output function module CONVERSION_EXIT_ZCONV_OUTPUT is coded to read the SID value for the SSN number from the SID table of the InfoObject and the input function module CONVERSION_EXIT_ZCONV_INPUT does the reverse by reading the SSN number for the SID.
Dropdowns on variable values work OK by displaying the SID value and the employee name. The only drawback is that you cannot input a SSN number on the selection variable. You have to do the dropdown and select.
Thanks
Vineet

Conversion exit error while activating the transfer rules

Hello gurus,
We are doing a function module extraction with 3.X data sources.
On activating the transfer rules , i am getting a conversion exit error for "0fiscyear", but in the infoobject we don't have the conversion exit for it.
Points will be awarded for any kind of response.
Thanks and Regards,
Anu.

Hi,
1. Please check in the transformation, its necessary to provide the fiscal variant mapping as well when ur mapping fiscal year object. as on the basis of that value fiscal period will be derived.
2 I guess ur doing direct mapping (Time conversion) and there is no routine written for that. if any u can check that as well for any error.
Thanks
dipika
Edited by: Dipika Tyagi on Jun 25, 2008 7:39 AM

Flat file Error in conversion exit CONVERSION_EXIT_PERI6_INPUT

Hello Experts!
I´m trying to upload a flat file data to an infocube and appears an error which diagnosis is:an error ocurred in record 1 during execution of conversion exit CONVERSION_EXIT_PERI6_INPUT for field CALMONTH.
Procedure: Check That the record where the error ocurred has the correct format , and correct it accordingly.
The characteristics in this fields (CALMONTH) are:
- Data Type: numc-character string with only digits.
- Length: 6
- Convers.rout. PERI6
- Output Length 7
I hope You can help me soon.
Thank you!

Hi Eduardo Vergara,
You just have to make sure the 0CALMONTH format is exactly the same. We have to match the format in the both columns. So in DataSource/Trans.Structure File CALMONTH change the Type to Numc and length o 6 . This is our problem but the tip is to match the proprieties.
Regards,
Alberto.

Conversion Exits

Hi all
In my report program, i am calling a conversion exit dynamically(i.e) the name of the conversion exit for a particular data type is generated accordingly.
The data is converted by the conversion exit to the specified format( i used MATNR)
for a value 3 it converted to 000000000000000003 (which is the proper format for MATNR).
but still i am not able to fetch values on the basis of this.
But if in my select option i pass the value of MATNR as 000000000000000003 directly, the correct data is fetched.
Note: For all other fields (such as ebeln, correct data is fetched, so it rules out any problems with the select query)
Plz help.
Thanks & Regards
Ravish Garg

* select statement to get the conversion exit name for the field *
select convexit
 into varconv_exit
 from dd01l
 where domname = vardomname.
endselect.

if conversion exit found for a field *
 concatenate 'CONVERSION_EXIT_'
 varconv_exit
 '_INPUT'
 into
 varconv_exit.
 perform f_conversion_exit
 using p_table
 p_field
 varconv_exit:
 changing s_range-low,
 s_range-high.
&----
*& Form f_conversion_exit
 text
 <--P_S_RANGE_LOW text
 <--P_S_RANGE_HIGH text
----
form f_conversion_exit using p_tabname
 p_fname
 p_convexit
 changing p_value1.
call function p_convexit
exporting
 input = p_value1
 importing
 output = p_value1
 exceptions
 length_error = 1
 others = 2.
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " f_conversion_exit
&----
*& Form get_data
 text
--> p1 text
<-- p2 text
form get_data .
select * into corresponding fields of table <dyn_table>
 from (p_table) where (it_where) .
if sy-dbcnt = 0.
 write :/ 'No Data matching Your Criteria!'.
 leave program.
endif.
endform. " get_data
When i put matnr in the filed name and a value for it,
it gets the right conversion exit name : "CONVERSION_EXIT_MATN1_INPUT" for matnr.

Conversion exit for project definition

Hi
I have created a generic extractor to get some data of table PRPS. The project-definition number in this table is in field PSPHI. When you display the result of the extractor in the extractor checker (RSA3) the correct number (e.g. PG5707) is showing, however, when it comes into BW, it is showing the internal number (e.g. 000002). In BW I use this field to populate 0PROJECT, but due to the internal number being sent, I cant use it.
Can anyone please tell me what conversion exit I can call in my extractor to get the external number?
I also notice in SE16 for this table there is a selection in the user parameters to tick under the "Format" section in the data browser tab. If it is not selected, it shows the internal number, but if selected, the external number is displayed. I want to do this in my extractor.
Thanks
Karin

Hello Karin,
Have a look at these OSS
SAP Note 776990 Conversion exits with string parameters
SAP Note 756662 RSAR 196:InfoObj. contains val. which is not conversion exit
SAP Note 925589 P8:SDL:New DS:Possible problems w/
SAPI conversion exit call
SAP Note 843164 P27:SDL: Problems with conversion exits in the selection tab
SAP Note 557148 Executing conversion exits
SAP Note 497043 P6:SDL:Scheduler selections in fields with conversion exits
SAP Note 1034798 P13:SDL:New DataSource uses incorrect conversion exit
SAP Note 681931 Error due to conversion exits during the file upload
SAP Note 1003431 Error in target fields with conversion exits
SAP Note 374997 SDL: Conversion exits: ABPSN, ABPRJ, ABPSP and MATN1
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/]

Function Module to retrive conversion exit function module names based on conversion routine

Hi All,
Can you people help me out in finding a function module, which takes conversion routine name as input and gives all the conversion exit function modules as output.
Thanks and Regards,
Shivaraj Naik.

Curious, I looked for the way SAP do the job in SE11, and they also use the CONCATENATE option...
From Include LSD11F01 Form OBJ_GOTO
*       Objektspezifische Navigationsziele
*      --> GOTOID   Kennung für Navigationsziele
*      --> DDNAME   Dictonary-Name
form obj_goto using gotoid type gotoid
                     ddname.
case gotoid.
    when 'CNVE'.   "Konvertierungsexit zu Domäne
      data: wb_request type ref to cl_wb_request.
      data: fb_name like tfdir-funcname
                        value 'CONVERSION_EXIT_'.
      concatenate fb_name ddname '*' into fb_name.
      condense fb_name.
* Request für Infosystem erzeugen
      class cl_wb_infosystem definition load.
      call method cl_wb_infosystem=>create_request
        exporting
          p_object_type        = 'FF'
          p_object_name        = fb_name
          p_operation          = swbm_c_op_search
          p_suppress_selection = 'X'
          p_show_as_popup      = 'X'
        importing
          p_wb_request         = wb_request
        exceptions
          action_cancelled     = 1
          execute_in_batch     = 2
          error_occured        = 3.
Regards,
Raymond

End routine for Currency conversion

Hi,
I have a requirement in which i have to convert sales and cost into three types of currency as GBP, INR and EUR in cube. i made 3 different fields for sales as well as for cost. But i am unable to write end routine for it.
Can anyone please help me that how can i solve this problem.
Roma

Hi,
In transformation itself you can do your currency conversion.
http://help.sap.com/saphelp_nw70/helpdata/en/de/6372426f0f9041e10000000a1550b0/content.htm
If you want to write a routine in to do conversion, you have to go for start routine instead of end routine.
Thanks
BVR

How to write conversion routine for key figure?

Our customer has this requirment:
we need to know the last time of some TV program in BEx report, If a TV program last 500 seconds, we need show the key figure like this: 00:08:20, If a TV program last 100000 seconds, we need show the key figure like 27:46:40 (27 hours and 46 minitues and 27 seconds), If we define a key figure as time, BW system will report a error that say it is not acceptable time. If we want to define a integer, but we need display it like hhmmss format. We know we can write conversion routine for char. but I don't how to write conversion routine for key figure.   Please give me any hint if any other solutions?
Edited by: SY DONG on Dec 2, 2010 3:36 AM

If you want to do in Transformation Layer :
You can use routine ...break up the seconds into minute hour and seconds
you will have to handle few cases in this:
let say your variable lv_seconds holds the number of seconds you want to convert to hour min and seconds
DATA: lv_seconds type i,
           lv_hrs type i,
          lv_sec type i,
          lv_min type i.
lv_hrs = lv_seconds / 3600
if lv_hrs >= 1.
lv_min = (lv_hrs - trunc(lv_hrs))*60
here again handle seconds if min >60.
else.
lv_hrs = '00'.
lv_min = lv_hrs*60
It is just hint ..how you can manipulate the seconds to get it...you will have to think about the complete algorithm
Regards,
RK

Data Conversion for Project Module

Dear all,
I have a requirement to perform data conversion for Project module from 11.5 to R12. I am new to this module. Can anybody can outline (or provide documentation reference):
1)Source tables in 11.5
2)Data Selection for source tables in 11.5
3)Validations need to be performed for data clean up
4)Interface tables and interface programs in R12
Thanks,
Sudip

See the following links for information on all R12 interfaces
Oracle Integration Repository Documentation Resources Release 12 (Doc ID 396116.1)
Note: 462586.1 - Where are the Oracle® Release 12 (R12) API Reference Guide?
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=462586.1
Note: 458225.1 - Release 12 Integration Repository
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=458225.1
If you are on 11i, go to irep.oracle.com
Hope this helps,
Sandeep Gandhi

How to make SELECT querry to work for CONVERSION EXIT

Dear All,
I want to select some data from from table J_1IEXCTAX , and to limit that retrieval I have WHERE clause for fields VALIDFROM and VALIDTO
My select querry is like
SELECT SINGLE RATE ECSRATE
 FROM J_1IEXCTAX
 INTO (J_1IEXCTAX-RATE,J_1IEXCTAX-ECSRATE)
 WHERE J_1ICHID = J_1IMTCHID-J_1ICHID and
 ( VALIDFROM LE T_GRREC-BUDAT and
 VALIDTO GE T_GRREC-BUDAT ).
But the field VALIDFROM and VALIDTO have data (i.e. dates) in different format
So my selection doesnt happen..
these formats can be converted to desired format using CONVERSION EXITs at their domain level...
But that increases coding and worsens performance.....
Could anybody give me some other solution?
Thanks in advance................
Code Formatted by: Alvaro Tejada Galindo on Jan 8, 2009 10:58 AM

Hi,
write T_GRREC-BUDAT to gv_date as <specify the format>
now use gv_date in ur seelct query.
Regards,
Nagaraj

Where can i find the conversion exits for date

hi
where can i find the conversion exits for date

Hi,
Use function modules to convert data into fiscal year and week.once you get week then you can calcute period,
quarter and half years based on that week.For this the function modules are
1..UMC_CALDAY_TO_FISCPER
2..DATE_TO_PERIOD_CONVERT
Regards,
swami.

Conversion Exit/Routines for Project ID

Similar Messages

Maybe you are looking for