Conversion from YYYYMMDD to Julian Date in BPEL

Hi,
My requirement is to convert date format from YYYYMMDD to Julian Date (CYYDDD) in BPEL.
C - Stands for Century
Would like to know a way to achieve this conversion in BPEL. Please suggest.
Appreciate your quick help.
Thanks
Priyanka G

Hi,
I suggest you use a java activity for that... There are many examples in java on how to convert a date to julian...
Cheers,
Vlad

Similar Messages

Date conversion from YYYYMMDD to DD.MM.YYYY

Hi,
I'm trying to load some data from a flat file into BW. I have a date column in the CSV file that has the date in YYYYMMDD format. when I load it into Bw, I want to change the format to DD.MM.YYYY .
I have written a small routine that should do this, but it doesn't seem to work.
data:v_date like sy-datum,
v_date1(10) type c.
Concatenate v_date+6(2) '.' v_date+4(2) '.' v_date+0(4) into v_date1.
RESULT = V_DATE1.
The result of this routine is YY.YYMM.DD instead of DD.MM.YYYY.
Can anyone tell me where I'm going wrong?
Thanks
Sam

Hi Keshu,
When I add the loop to my code, it doesn't seem to work. It gives me the following error:
does not match the user-dependent date format --> long text
Diagnosis
does not correspond to the date format that is assigned to the current user ASDSAD.
System Response
The date cannot be converted; the process was terminated.
Procedure
Enter the conversion exit RSDAT for automatic date format detection.
Any suggestions?

Conversion of Hiredate to Julian date

Hi Gurus,
Need help in Conversion of hiredate of emp table to Julian date...
to_date('HIREDATE','YDDD')
Thanks

Hi,
SeenuGuddu wrote:
Hi Gurus,
Need help in Conversion of hiredate of emp table to Julian date...
to_date('HIREDATE','YDDD')
ThanksIf you have a DATE column called hiredate, then you can use TO_CHAR to display it in the format you want, like this:
TO_CHAR (hiredate, 'YDDD')Notice that there are no quotes around the first argument.
Use TO_DATE if you are starting with a string and you want to produce a DATE. For example:
TO_DATE ('9320', 'YDDD')or, if you have a column called hiredate_text:
TO_DATE (hiredate_text, 'YDDD')Again, the first argument is not quoted, because it is a column name, not the literal value.
The Julian Date is (currently) a 7-digit number. If you use some other coding system for dates, it will only cause confusion if you call it "Julian".
There's already enough confusion between "Julian Date" and "Julian Calendar" (which Oracle uses for dates up to 1582).

Conversion from a string to date type

I am trying for a servlet application , for which the requirement is as under :
from a html form through a input type text field , a date in string format , say 12/25/01 , is picked up.
this date is received in the servlet code , and is required to be updated in Microsoft Access Database Table under a field of data type "Date/Time"
here the problem is , the date's existing data type is String and the Access' field's Data type is Date/Time , therefore, it needs to be suitably converted to a date format before it is put into a sql statement .
please help , if any functionality is available for a conversion .
thanx and regards

yes stephen , taking a tip from you and another from a post from this forum yesterday on SQL Exception , i shifted my focus to java.sql.Date ,
now modifying my code as under works with perfect perfection ,
thanks stephen and joe schell for all the help
kapil
import java.text.*;
import java.sql.Date;
import java.sql.*;
class HardTrial{
     public static void main(String args[]){
          Connection con = null;
          Statement stmt = null;
          ResultSet rs = null;
          Date d = new Date(123456789);// initialising with some value
          Date d1 = d.valueOf("1994-12-12");
          try{
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          con = DriverManager.getConnection("jdbc:odbc:STUDENT_DSN");
          stmt= con.createStatement();
     PreparedStatement ps = con.prepareStatement("INSERT INTO NewTab VALUES (?,?)");
     ps.setDate(1, d1);
ps.setString(2, "TESTING");
ps.executeUpdate();
     rs = stmt.executeQuery("SELECT WHEN,WHAT FROM NewTab");
     while (rs.next()){
     System.out.println(rs.getString("WHEN")+ rs.getString("WHAT"));
     }catch(Exception e){
          System.out.println(e);

Conversion from scaled ton unscaled data using Graph Acquired Binary Data

Hello !
I want to acquire temperature with a pyrometer using a PCI 6220 (analog input (0-5V)). I'd like to use the VI
Cont Acq&Graph Voltage-To File(Binary) to write the data into a file and the VI Graph Acquired Binary Data to read it and analyze it. But in this VI, I didn't understand well the functionnement of "Convert unscaled to scaled data", I know it takes informations in the header to scale the data but how ?
My card will give me back a voltage, but how can I transform it into temperature ? Can I configure this somewhere, and then the "Convert unscaled to scaled data" will do it, or should I do this myself with a formula ?
Thanks.

Nanie, I've used these example extensively and I think I can help. Incidently, there is actually a bug in the examples, but I will start a new thread to discuss this (I haven't written the post yet, but it will be under "Bug in Graph Acquired Binary Data.vi:create header.vi Example" when I do get around to posting it). Anyway, to address your questions about the scaling. I've included an image of the block diagram of Convert Unscaled to Scaled.vi for reference.
To start, the PCI-6220 has a 16bit resolution. That means that the range (±10V for example) is broken down into 2^16 (65536) steps, or steps of ~0.3mV (20V/65536) in this example. When the data is acquired, it is read as the number of steps (an integer) and that is how you are saving it. In general it takes less space to store integers than real numbers. In this case you are storing the results in I16's (2 bytes/value) instead of SGL's or DBL's (4 or 8 bytes/value respectively).
To convert the integer to a scaled value (either volts, or some other engineering unit) you need to scale it. In the situation where you have a linear transfer function (scaled = offset + multiplier * unscaled) which is a 1st order polynomial it's pretty straight forward. The Convert Unscaled to Scaled.vi handles the more general case of scaling by an nth order polynomial (a0*x^0+a1*x^1+a2*x^2+...+an*x^n). A linear transfer function has two coefficients: a0 is the offset, and a1 is the multiplier, the rest of the a's are zero.
When you use the Cont Acq&Graph Voltage-To File(Binary).vi to save your data, a header is created which contains the scaling coefficients stored in an array. When you read the file with Graph Acquired Binary Data.vi those scaling coefficients are read in and converted to a two dimensional array called Header Information that looks like this:
ch0 sample rate, ch0 a0, ch0 a1, ch0 a2,..., ch0 an
ch1 sample rate, ch1 a0, ch1 a1, ch1 a2,..., ch1 an
ch2 sample rate, ch2 a0, ch2 a1, ch2 a2,..., ch2 an
The array then gets transposed before continuing.
This transposed array, and the unscaled data are passed into Convert Unscaled to Scaled.vi. I am probably just now getting to your question, but hopefully the background makes the rest of this simple. The Header Information array gets split up with the sample rates (the first row in the transposed array), the offsets (the second row), and all the rest of the gains entering the for loops separately. The sample rate sets the dt for the channel, the offset is used to intialize the scaled data array, and the gains are used to multiply the unscaled data. With a linear transfer function, there will only by one gain for each channel. The clever part of this design is that nothing has to be changed to handle non-linear polynomial transfer functions.
I normally just convert everything to volts and then manually scale from there if I want to convert to engineering units. I suspect that if you use the express vi's (or configure the task using Create DAQmx Task in the Data Neighborhood of MAX) to configure a channel for temperature measurement, the required scaling coefficients will be incorporated into the Header Information array automatically when the data is saved and you won't have to do anything manually other than selecting the appropriate task when configuring your acquisition.
Hope this answers your questions.
ChrisMessage Edited by C. Minnella on 04-15-2005 02:42 PM
Attachments:
Convert Unscaled to Scaled.jpg ‏81 KB

Conversion from milliseconds to Date in 1.5

A java.util.Date object can be constructed by passing the number of milliseconds since 1 January 1970 as a constructor argument. This Date can then be formatted to a human-readable format with SimpleDateFormat.
I have tested this conversion from milliseconds to a date both in Java SDK 1.4.1 and Java 1.5.0 to see if there are differences in the way dates are calculated from milliseconds. It seems that there are differences when the system timezone is set to Europe/Berlin. The dates from 1.5.0 are one hour ahead of those from 1.4.1 in a certain week in May 1945 and a day in September 1945.
This means that milliseconds that are generated from a date by using the Java 1.4.1 runtime and then stored are interpreted differently when they are retrieved when using java runtime 1.5.0, if they happen to be one of those days in 1945. This could cause discrepancies when an application is migrated to JDK 1.5.0.
This is only a minor problem, but is there any way to know what caused these changes in SDK 1.5.0 and what these changes are? Is there historical data that the Sun implementation is based on to calculate dates from millisecond values?
Any help is appreciated.
Kind regards

I found the following at "http://thedailywtf.com/forums/70146/ShowPost.aspx"
In summer 1945, Berlin and the Soviet-occupied part of Germany observed a daylight savings time of two hours. Unfortunately, Sun's JRE 1.4 implementation of GregorianCalendar defines a maximum DST of one hour and, in non-lenient mode, rejects the 2 hours as invalid when recalculating all fields after the millisecond field is set.
Here's the bug report: http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4639407

Conversion of Julian date to YYYYMMDD

Hi,
The flat file has the date in Julian date format YYYYDDD. How to load it into infoprovider in the format YYYYMMDD?
Thanks.

To get the YYYY portion of the Gregorian Date, you would use the YYYY portion of the Julian Date.
To get he MMDD portion of the Gregorian Date you would start with the DDD portion of the Julian Date and start subtracting 31, 28 (or 29 in leap years), 31, 30, 31, 30, 31, 31, 30, 31, 30, and 31, successively, until you first get a result which is zero or negative. The month MM is the number of subtractions you have done, and the last positive subtraction result is the day DD.
As an example, let's use a Julian Date of 2009.278. The YYYY of the Julian Date (2009) would be the YYYY for the Gregorian Date. To get MMDD, start subtracting from 278 as follows:
278 - 31 = 247
247 - 28 (2009 not being a leap year) = 219
219 - 31 = 188
188 - 30 = 158
158 - 31 = 127
127 - 30 = 97
97 - 31 = 66
66 - 31 = 35
35 - 30 = 5
5 - 31 = -26
Since the tenth calculation was the last result that was positive, the MM is 10 and since the positive value from that is the DD or 5. This would result in a Gregorian Date of 20091005.

Convert Date format from YYYYMMDD to MM/DD/YYYY --issue with Mapping

Hi All ,
I have IDOC(DESADV.DELVRY03-> file ) scenario which i am working on . While debugging noticed that the field :
E1EDT13\NATNZ -Data Transformation(from yyyymmdd to mm/dd/yyyy)-Target .This works
But say if IDOC doesn't pass any value (For Good's issue) I get Error during debugging : RuntimeException in Message-Mapping transformation: Unparseable date: ""
I did check thsi blog : Convertinf Date format from YYYY-MM-DD to MMDDYYYY but this is about the Data Transformtaion.
I tried using constants , create if , -these function doesn't work /not applicle in this case
Could you please provide inputs as to how to handle two condition :
1. With date -- then transform
2.Else , pass nothing

Hi Varalakshmi,
Plese try to use UDF for date conversion and include logic which would check the Space value from the source structure.
so if there is space return as such
else.
perform the conversion logic.
Convertinf Date format from YYYY-MM-DD to MMDDYYYY
(The conversion logic has been provided by micheal in the thread you have provided in the query)
Thanks,
Ram.

Function module to change Date from YYYYMMDD to DD.MM.YYYY

Hi
PLease tell me the function module that will convert date from YYYYMMDD to DD.MM.YYYY
Thanks

Hi,
data lv_date1 type sy-datum.
data lv_date2(12).
lv_date1 = '20070123'.
concatenate lv_date16(2) lv_date14(2) lv_date1+0(4) into lv_date2
separated by '.' .
is what you require to do;
now lv_date2 = 23.01.2007.
Also look for conversion routine "CONVERSION_EXIT_PDATE_OUTPUT"
EG: call function CONVERSION_EXIT_PDATE_OUTPUT
exporting input = lv_date1
importing output = lv_date2.
Thanks,
Anitha

Reg : date format conversion from dd.mm.yyyy to mmddyyyy

hi ALL,
is there any function module which can convert date format
from <b>dd.mm.yyyy to mmddyyyy</b>.
Thanks in advance

Hi,
Please check the following
CONVERSION_EXIT_PDATE_INPUT Conversion Exit for Domain GBDAT: DD/MM/YYYY -> YYYYMMDD
CONVERSION_EXIT_PDATE_OUTPUT Conversion Exit for Domain GBDAT: YYYYMMDD -> DD/MM/YYYY
SCA1 Date: Conversion
CONVERSION_EXIT_IDATE_INPUT External date INPUT conversion exit (e.g. 01JAN1994)
CONVERSION_EXIT_IDATE_OUTPUT External date OUTPUT conversion exit (e.g. 01JAN1994)
CONVERSION_EXIT_LDATE_OUTPUT Internal date OUTPUT conversion exit (e.g. YYYYMMDD)
CONVERSION_EXIT_SDATE_INPUT External date (e.g. 01.JAN.1994) INPUT conversion exit
CONVERSION_EXIT_SDATE_OUTPUT Internal date OUTPUT conversion exit (e.g. YYYYMMDD)
TB01_ADDON
CONVERSION_EXIT_DATEX_INPUT
CONVERSION_EXIT_DATEX_OUTPUT
Hope this would surely help you out.
Thanks and regards,
Varun.

Julian Date Conversion

I've been trying to figure this out for a few days now.
For work, I'm trying to show that I am willing to keep track of our cigarette inventory and each carton's expiration date. So, I've figured out how to read carton codes for products from Philip Morris. But I want to be lazy (lol) and not have to figure out what month, and then day of that month, each carton was manufactured in from the Julian Date provided on the carton.
My question is, how do I get Numbers to read "2009055" and convert it to "02/23/2009"? If there is a way and it requires a different input syntax, I'll be more than happy to change over to that instead. I haven't been able to figure it out. I'm sure there's someone out there who can figure this one out. I found instructions on how to do it in Microsoft Excel. I'm sure Numbers '08 can manage it somehow, right?
Thanks for your time,
-- Evan

Evan,
I'll share my solution with you on two conditions. First, I'd like to see the solution you found for Excel. Second I'd like you to promise to smoke only in your car with the windows up.
With your input in Column A, the conversion expression is:
=DATE(LEFT(A,4),1,1)+RIGHT(A,3)-1
By the way, 2009 is not a leap year, and in this date format I believe the convention is that January 01, 2009 would be "2009001", so 2009055 converts to "02/24/2009", not "02/23/2009".
I don't have Numbers 08 on this computer, so my test of the expression was done on Numbers 09, but I'm pretty confident that the result will be the same.
Regards,
Jerry

Conversion from string "20041023 " to type 'Date' is not valid.

Hi ,
I have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report.
Following methods i tried in textbox expression but no luck.
=Format(Fields!EmpHireDate.Value,"dd/MM/yyyy")
=Cdate(Fields!EmpHireDate.Value)
Error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023 " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ? Can anyone help me with the solution.
Thanks,
Kittu

Hi Jmcmullen,
Found one more issue on the same. I have one value like "00000000" for the column(EmpHiredate)
, when i use above expression values(ex:"20141023")
are displaying in dd/MM/yyyy format in report except value like "00000000" and giving following error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "0000/00/00" to type 'Date' is not valid.
Even i tried to pass its original value("00000000") as below but no luck.
=IIF(Fields!EmpHireDate.Value = "00000000","00000000",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Also tried this:
=IIF(Fields!EmpHireDate.Value = "00000000","2000/10/21",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Please Suggest.
Thanks ,
Kittu

Date/time conversion from UTC to CET

Hello,
Jjust a little question to our SAP BI community!
Is there a BI function/ggod way that converts a (datetime) string DDMMYYYYHH:MM:SS in UTC time zone into a string DDMMYYYYHH:MM:SS in CET timezone ?
We receive this string in input in a flat file and need it to convert from UTC to CET.
Or do you know any way to convert a date/time from IUTC to CET, eveen using an ABAP function?
Thanks a lot,
Matthieu

Hi,
Check this thread for time conversion from UTC to Local time
[ABAP statement for converting UTC date/ time to local date/time],
Regards,
Daya Sagar

Function module to convert date format from yyyymmdd to mmddyyyy format

function module to convert date format from yyyymmdd to mmddyyyy format

Hi Rajitha,
Do like this
Data: Var1 type sy-datum,
var2(8) type c.
var1 = sy-datum.
Concatanate var1+4(2) var1+6(2) var1+0(4) into var2.
write var2.
Reward Points if this helps,
Satish

Implicit Conversion from data type sql_variant to datetime is not allowed.

Getting a odd error. This code was working perfectly before a SQLServer upgrade.
The linked database is working, I'm able to pull up data from it in separate queries just fine.
I'm getting the following error.
Implicit conversion from data type sql_variant to datetime is not allowed. Use the CONVERT function to run this query.
Invalid column name 'TotalDay'. (.Net SqlClient Data Provider)
can anyone spot the issue? I've tried sever variations of the same code, but still get the same thing.
If I put this section in a query by it self it works just fine.
( DATEDIFF(ss,
CONVERT(VARCHAR(10),( SELECT TOP ( 1 )
TimeDate
FROM [nav].AcsLog.dbo.EvnLog AS X3
WHERE UDF2 = E.No_
AND CONVERT(VARCHAR(10), X3.TimeDate, 101) = CONVERT(VARCHAR(10), @sdate, 101)
ORDER BY TimeDate ASC
),101),
CONVERT(VARCHAR(10),( SELECT TOP ( 1 )
TimeDate
FROM [nav].AcsLog.dbo.EvnLog AS X4
WHERE UDF2 = E.No_
AND CONVERT(VARCHAR(10), X4.TimeDate, 101) = CONVERT(VARCHAR(10), @sdate, 101)
ORDER BY TimeDate DESC
),101)) ) AS TotalDayBadge ,

>ANDCONVERT(VARCHAR(10),X3.TimeDate,101)=CONVERT(VARCHAR(10),@sdate,101)
It is not a good idea to use string dates for predicates in WHERE clauses.
Use DATETIME or DATE in predicates.
If you are not interested in the time part of DATETIME, use DATE datatype.
Example:
SELECT CONVERT(DATE, getdate());
-- 2014-08-25
Datetime conversions:
http://www.sqlusa.com/bestpractices/datetimeconversion/
Between dates:
http://www.sqlusa.com/bestpractices2008/between-dates/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Conversion from YYYYMMDD to Julian Date in BPEL

Similar Messages

Maybe you are looking for