Conversion of External Price Value to Internal Dec. notation of MBEW-STPRS
Hi Guru's,
I'm doing the Report for the BOM.
I'm facing one problem in passsing the MBEW-STPRS value,
I'm passing it as character field, even though it is checking for the format for the price.
could you guys suggest me one Function Module which converts the External Price value to Internal Price Format using Internal Decimal notation.
Thanks in advance.
Regards,
try to use [SET COUNTRY|http://help.sap.com/abapdocu/en/ABAPSET_COUNTRY.htm]
Similar Messages
-
Conversion of External material with Internal using search help
Hi,
We are working on ECC 6.0 for automotive company and have following scenario.
One OE (External/Customer) material number (MARA-BISMT) with more than one internal material number (MARA-MATNR). This has been done because same customer material is sold by delar for different brands, for exmaple BMW, Ford, Opel. Therefore we have different internal materials with respective brands with same external number in material master.
Business requirement is, all correspondence with customer or vendor should be done using external/customer material number.
Whereas all internal business process should use internal SAP material number.
For example as given below
External No. --> Internal No.
BMW-1 --> 1001 (Brand - BMW)
BMW-1 --> 1002 (Brand - Ford)
BMW-1 --> 1003 (Brand - Opel)
Now the requirement is that user will create document, for example PO or SO, with external/customer material number. While
doing that user should get a pop up screen after entering external material number, if external material is attached/corresponds to multilple internal material number. Then user will selects correct internal number from pop up screen and return to document screen but material field should displayed with external material number.
For example in above case, user will enter BMW-1. Pup up screen will have three internal numbers 1001, 1002 and 1003. User selects 1003 but after material conversion material field of the document will displayed as BMW-1.
We are using Customer enhancement - "MGA00003 Material Master (Industry and Retail): Number Display" for input/ouput conversion.
Also we have created Elementary Search Help - SEARCH_OE_NUMBER with Hot Key "Q". This search help is included into
collective search help "MAT1_A" so that user can able to see multiple internal material number by entring customer material number.
We are able to convert external material number with internal material number and put the external material while creating PO. But when we add another item in PO, search help is getting called again and again for first line item even after conversion of matrial has been taken place.
How we can avoid this multiple calling of serach help?
Is there any better way to achieve this requirement?
Please help us.
Thanks,We have resolved this issue by redesigning material master data.
-
OO ALV displaying without Values despite Internal table contains
My below OO ALV displaying without Values despite Internal table contains the values ...
Help please ...
REPORT zsd_concession1 NO STANDARD PAGE HEADING
LINE-SIZE 285
LINE-COUNT 64
MESSAGE-ID zz.
Program Description ******************************
This report is to Calculate consession against Quotations
complying standards for enhanced Performance, Readability &
Maintenance.
Change Log *********************************
Remedy # / Who When Why / What
Transport #
CLASS lcl_event_handler DEFINITION DEFERRED.
*& Data Definitions .
DATA: BEGIN OF vbap_wa,
vbeln TYPE vbak-vbeln, "Quotation#
erdat TYPE vbak-erdat, "Quot date
knumv TYPE vbak-knumv, "Cond Rec#
posnr TYPE vbap-posnr, "Line Item
matnr TYPE vbap-matnr, "Mat#
zansicat TYPE zmarall-zansicat, "AnsiCat#
zansigrd TYPE zmarall-zansigrd, "Grade
zcurrvaltnarea TYPE zco002-zcurrvaltnarea,"Val Area
zcurrcstusd TYPE zco002-zcurrcstusd, "Cost$
zzbrndnm TYPE mara-zzbrndnm, "Brand
zqedscgrp TYPE zglbprc-zqedscgrp, "QE Disc Grp
mstav TYPE mara-mstav, "Status
kwmeng TYPE vbap-kwmeng, "Qty
lprc TYPE konv-kbetr, "List Price ZBP1
sprc TYPE konv-kbetr, "Std Pric ZNAA,ZNAX
netpr TYPE vbap-netpr, "Quot price
mrgn TYPE konv-kbetr, "margin%
END OF vbap_wa,
BEGIN OF konv_wa,
knumv TYPE konv-knumv, "Cond#
kposn TYPE konv-kposn, "Cond Item#
kappl TYPE konv-kappl, "Applic
kschl TYPE konv-kschl, "Cond Typ
kbetr TYPE konv-kbetr, "Price ZBP1,ZNAA,ZNAX
END OF konv_wa,
BEGIN OF vbpa_wa,
vbeln TYPE vbpa-vbeln, "Quot#
posnr TYPE vbpa-posnr, "Item#
parvw TYPE vbpa-parvw, "Prt Fn
kunnr TYPE vbpa-kunnr, "Cust#
END OF vbpa_wa,
BEGIN OF result_wa,
posnr TYPE vbap-posnr, "Line Item
matnr TYPE vbap-matnr, "Mat#
zansicat TYPE zmarall-zansicat, "AnsiCat#
zansigrd TYPE zmarall-zansigrd, "Grade
zcurrvaltnarea TYPE zco002-zcurrvaltnarea,"Val Area
zcurrcstusd TYPE zco002-zcurrcstusd, "Cost$
zzbrndnm TYPE mara-zzbrndnm, "Brand
zqedscgrp TYPE zglbprc-zqedscgrp, "QE Disc Grp
mstav TYPE mara-mstav, "Status
kwmeng TYPE vbap-kwmeng, "Qty
lprc TYPE konv-kbetr, "List Price ZBP1
sprc TYPE konv-kbetr, "Std Pric ZNAA,ZNAX
netpr TYPE vbap-netpr, "Quot price
mrgn TYPE konv-kbetr, "margin%
END OF result_wa.
DATA: ikonv LIKE STANDARD TABLE OF konv_wa,
ivbap LIKE STANDARD TABLE OF vbap_wa,
ivbpa LIKE STANDARD TABLE OF vbpa_wa,
iresult LIKE STANDARD TABLE OF result_wa.
*Work storage
DATA: BEGIN OF ws,
vbeln TYPE vbak-vbeln,
ok_code TYPE sy-ucomm,
alv_save TYPE c, "ALV save
alv_variant TYPE disvariant, "ALV Variant
alv_sort TYPE lvc_t_sort, "Sort table
END OF ws.
*Data declarations for ALV Main list
DATA : ty_lay1 TYPE lvc_s_layo,
it_fieldcat TYPE lvc_t_fcat ,
ty_fieldcat TYPE lvc_s_fcat ,
l_smenu TYPE REF TO cl_ctmenu,
c_alv1 TYPE REF TO cl_gui_alv_grid,
c_cont1 TYPE REF TO cl_gui_custom_container,
e_dclick TYPE REF TO lcl_event_handler.
*Data declarations for ALV Interactive list
DATA : ty_lay2 TYPE lvc_s_layo,
it_fcat TYPE lvc_t_fcat ,
ty_fcat TYPE lvc_s_fcat ,
c_alv2 TYPE REF TO cl_gui_alv_grid,
c_cont2 TYPE REF TO cl_gui_custom_container.
*Field-Symbols
FIELD-SYMBOLS:
<konv> LIKE konv_wa,
<vbap> LIKE vbap_wa.
*Constants
CONSTANTS:
c_end_row TYPE i VALUE 65000.
*CLASS lcl_event_receiver DEFINITION
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
METHODS:
handle_double_click
FOR EVENT double_click OF cl_gui_alv_grid IMPORTING e_row.
ENDCLASS. "lcl_event_handler DEFINITION
*CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_handler IMPLEMENTATION.
METHOD handle_double_click.
DATA: sec_wa LIKE LINE OF iresult.
*Reading the selected data into a variable
READ TABLE iresult INDEX e_row-index INTO sec_wa.
*Select the field details of the selected table
SELECT * FROM dd03l INTO CORRESPONDING FIELDS OF TABLE it_dd03l
WHERE tabname EQ ls_dd02l-tabname.
*Calling the ALV containing the field values
CALL SCREEN 101.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_event_handler IMPLEMENTATION
*& SELECTION-SCREEN.
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-001.
SELECT-OPTIONS:
s_vbeln FOR ws-vbeln DEFAULT '2002354788' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK a.
INITIALIZATION.
PERFORM setup_screen_defaults.
START-OF-SELECTION.
PERFORM gather_report_data.
END-OF-SELECTION.
PERFORM create_output.
*& Form initialization
FORM setup_screen_defaults.
CLEAR: ws, konv_wa, vbap_wa, vbpa_wa.
REFRESH: ivbpa, ikonv, ivbap, iresult.
ENDFORM. " setup_screen_defaults
*& Form gather_report_data
FORM gather_report_data.
SELECT vbeln posnr parvw kunnr
INTO TABLE ivbpa
FROM vbpa
WHERE vbeln IN s_vbeln
AND ( parvw = 'SP' OR "SoldTO
parvw = 'WE' OR "ShipTo
parvw = 'ZT' ). "Top Parent
SELECT vkvbeln vkerdat vkknumv vpposnr vp~matnr
z1zansicat z1zansigrd z2~zcurrvaltnarea
z2zcurrcstusd m1zzbrndnm zg~zqedscgrp
m1mstav vpkwmeng vp~netpr
INTO CORRESPONDING FIELDS OF TABLE ivbap
FROM vbak AS vk
INNER JOIN vbap AS vp
ON vpvbeln = vkvbeln
INNER JOIN zmarall AS z1
ON z1matnr = vpmatnr
INNER JOIN zco002 AS z2
ON z2matnr = vpmatnr
INNER JOIN zglbprc AS zg
ON zgmatnr = vpmatnr
INNER JOIN mara AS m1
ON m1matnr = vpmatnr
WHERE vk~vbeln IN s_vbeln
AND vk~auart = 'AG'."AG = Quot
SORT ivbap BY posnr matnr.
SELECT kvknumv kvkposn kvkappl kvkschl kv~kbetr
INTO TABLE ikonv
FROM konv AS kv
FOR ALL ENTRIES IN ivbap
WHERE kv~knumv = ivbap-knumv
AND kv~kposn = ivbap-posnr
AND kv~kappl EQ 'V'
AND ( kv~kschl EQ 'ZBP1'
OR kv~kschl EQ 'ZNAX'
OR kv~kschl EQ 'ZNAA' ).
SORT ikonv BY knumv kposn.
LOOP AT ivbap ASSIGNING <vbap>.
CLEAR konv_wa.
READ TABLE ikonv INTO konv_wa WITH KEY
knumv = <vbap>-knumv
kposn = <vbap>-posnr
kschl = 'ZBP1'
BINARY SEARCH.
IF sy-subrc EQ 0.
<vbap>-lprc = konv_wa-kbetr.
ENDIF.
READ TABLE ikonv INTO konv_wa WITH KEY
knumv = <vbap>-knumv
kposn = <vbap>-posnr
kschl = 'ZNAX'
BINARY SEARCH.
IF sy-subrc EQ 0.
<vbap>-sprc = konv_wa-kbetr.
ENDIF.
READ TABLE ikonv INTO konv_wa WITH KEY
knumv = <vbap>-knumv
kposn = <vbap>-posnr
kschl = 'ZNAA'
BINARY SEARCH.
IF sy-subrc EQ 0.
<vbap>-sprc = konv_wa-kbetr.
ENDIF.
ENDLOOP.
SORT ivbap BY posnr matnr.
LOOP AT ivbap INTO vbap_wa.
MOVE-CORRESPONDING vbap_wa TO result_wa.
APPEND result_wa TO iresult.
CLEAR: vbap_wa, result_wa.
ENDLOOP.
ENDFORM. " gather_report_data
*& Form create_output
FORM create_output.
CALL SCREEN 100.
FREE: iresult.
ENDFORM. " create_output
*& Module PBO_0100 OUTPUT
text
MODULE pbo_0100 OUTPUT.
SET PF-STATUS '0100'.
SET TITLEBAR '0100'.
IF c_cont1 IS INITIAL.
*Creating object of container
CREATE OBJECT c_cont1
EXPORTING
container_name = 'CCONT1'.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Creating object of alv
CREATE OBJECT c_alv1
EXPORTING
i_parent = c_cont1.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Alv layout
PERFORM alv_100_layout.
PERFORM save_alv_layout.
*Alv field catalogue
PERFORM alv_100_fieldcat.
*Displaying the ALV grid
CALL METHOD c_alv1->set_table_for_first_display
EXPORTING
is_layout = ty_lay1
i_save = ws-alv_save
is_variant = ws-alv_variant
CHANGING
it_outtab = iresult[]
it_sort = ws-alv_sort
it_fieldcatalog = it_fieldcat[].
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Create object of the event class
*and setting handler for double click
CREATE OBJECT e_dclick.
SET HANDLER e_dclick->handle_double_click FOR c_alv1.
ENDIF.
ENDMODULE. " PBO_0100 OUTPUT
*& Module PAI_0100 INPUT
text
MODULE pai_0100 INPUT.
ws-ok_code = sy-ucomm.
CASE ws-ok_code.
WHEN 'BACK'.
CALL SELECTION-SCREEN 1000.
CLEAR ws-ok_code.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
CLEAR ws-ok_code.
EXIT.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
CLEAR ws-ok_code.
EXIT.
WHEN OTHERS.
ENDCASE.
ENDMODULE. " PAI_0100 INPUT
*& Form alv_100_layout
text
--> p1 text
<-- p2 text
FORM alv_100_layout.
ty_lay1-numc_total = 'X'. " Numc total line
ty_lay1-cwidth_opt = 'X'. " Optimal column width
ty_lay1-detailinit = 'X'. " Show values that are initial in
ty_lay1-sel_mode = 'A'. " Column selection mode
ty_lay1-no_merging = 'X'. " No merging while sorting columns
ty_lay1-keyhot = 'X'.
ty_lay1-grid_title = 'SD Concessions'.
ty_lay1-zebra = 'X'.
ty_lay1-no_toolbar = ' '.
ENDFORM. " alv_100_layout
*& Form alv_100_fieldcat
text
--> p1 text
<-- p2 text
FORM alv_100_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 1.
ty_fieldcat-fieldname = 'posnr'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Item#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 2.
ty_fieldcat-fieldname = 'matnr'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Mat#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 3.
ty_fieldcat-fieldname = 'zansicat'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'AnsiCat#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 4.
ty_fieldcat-fieldname = 'zansigrd'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Grade'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 5.
ty_fieldcat-fieldname = 'zcurrvaltnarea'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Val Area'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 6.
ty_fieldcat-fieldname = 'zcurrcstusd'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Cost $'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 7.
ty_fieldcat-fieldname = 'zzbrndnm'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Brand'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 8.
ty_fieldcat-fieldname = 'zqedscgrp'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'QE'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 9.
ty_fieldcat-fieldname = 'mstav'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Status'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 9.
ty_fieldcat-fieldname = 'kwmeng'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Qty'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 10.
ty_fieldcat-fieldname = 'lprc'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'List Price'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 11.
ty_fieldcat-fieldname = 'sprc'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Discount'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 12.
ty_fieldcat-fieldname = 'netpr'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Quot Price'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 13.
ty_fieldcat-fieldname = 'mrgn'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Margin%'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
ENDFORM. " alv_100_fieldcat
*& Module PBO_0101 OUTPUT
text
MODULE pbo_0101 OUTPUT.
*Check if the Custom container exists.
IF c_cont2 IS INITIAL.
*Creating container object
CREATE OBJECT c_cont2
EXPORTING
container_name = 'CCONT2'.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*creating ALV grid for interactive list
CREATE OBJECT c_alv2
EXPORTING
i_parent = c_cont2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*ALV layout
PERFORM alv_101_layout.
*ALV fieldcatalogue
PERFORM alv_101_fieldcat.
*Sorting the output by field position
SORT iresult BY posnr.
*ALV for display field details
CALL METHOD c_alv2->set_table_for_first_display
EXPORTING
is_layout = ty_lay2
CHANGING
it_outtab = iresult[]
it_fieldcatalog = it_fieldcat.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDMODULE. " PBO_0101 OUTPUT
*& Module PAI_0101 INPUT
text
MODULE pai_0101 INPUT.
ENDMODULE. " PAI_0101 INPUT
*& Form alv_101_layout
text
--> p1 text
<-- p2 text
FORM alv_101_layout.
ty_lay2-grid_title = 'Line Details'.
ty_lay2-zebra = 'X'.
ty_lay2-no_toolbar = 'X'.
ENDFORM. " alv_101_layout
*& Form alv_101_fieldcat
text
--> p1 text
<-- p2 text
FORM alv_101_fieldcat.
REFRESH it_fieldcat.
REFRESH it_fcat.
CLEAR ty_fcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 1.
ty_fieldcat-fieldname = 'posnr'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Item#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 2.
ty_fieldcat-fieldname = 'matnr'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Mat#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 3.
ty_fieldcat-fieldname = 'zansicat'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'AnsiCat#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 4.
ty_fieldcat-fieldname = 'zansigrd'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Grade'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 5.
ty_fieldcat-fieldname = 'zcurrvaltnarea'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Val Area'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
ENDFORM. " alv_101_fieldcat
*& Form save_alv_layout
text
--> p1 text
<-- p2 text
form save_alv_layout.
ws-alv_save = 'A'.
ws-alv_variant-report = sy-repid.
endform. " save_alv_layoutHello
Creating fieldcatalogs manually is one of the major error sources in ALV programming.
There is hardly any reason why NOT to use the standard-fm LVC_FIELDCATALOG_MERGE in order to create a proper fieldcatalog.
If you need some modification of the standard fieldcatalog (e.g. renaming of columns, etc.) just do your post-processing after calling the fm.
Regards
Uwe -
External price not being read in for Item in GN_INVOICE_CREATE and RVAFSS00
Hi,
We are trying to create invoices using the RVAFSS00 program which calls the function GN_INVOICE_CREATE. The billing document is being created. However, the item price does not bring in the price that we have supplied in the XKOMFKKO-KBETR (Condition amount) field. In KSCHL XKOMFKKO-KSCHL (Condition type) field we are passing in ZROO which is basically a copy of the pricing condition PR00.
For ZR00, the condition class is Prices and the calculation type is Quantity.
We want the item price in the billing document to be the price we supply in XKOMFKKO-KBETR to be multiplied by the XKOMFKGN-KWMENG. We have left the Rate as blank for ZR00 pricing condition because we want our pricing to override this value. If we do give a value for the ZR00 pricing condition, then our billing document Net value will multiply the amount by the ZR00 pricing - which we do not want. We want it to use the XKOMFKKO-KBETR price.
If you have used this program or function to pass in external prices, your help would be really appreciated. We have looked through a lot of areas in the IMG for Pricing, Billing, Maintain Copying control of Billing documents.
Thanks,
JayDid not find the documentation for the fm any where, i think best place to look for is OSS.
Parameter: ID_NO_DIALOG is for suppressing some shipping related screen and ID_NO_ENQUEUE is for locking sales order or delivery doc.
By using where used list of the function module, some times it's possible to find out the use of other parameters.
Hope this helps.
Regards
Sridhar -
Fetch the values from internal table inside an internal table (urgent!!)
data : BEGIN OF PITB2_ZLINFO occurs 0,
BEGDA LIKE SY-DATUM,
ENDDA LIKE SY-DATUM,
PABRJ(4) TYPE N, "Payroll Year
PABRP(2) TYPE N, "Pay. Period
ZL LIKE PC2BF OCCURS 0,
END OF PITB2_ZLINFO.
I have a internal table like this,
How to Fetch the values from internal table inside an internal table.
Kindly Help me on this..
Regards,
Ram.Hi,
Try this....
Loop at PITB2_ZLINF0.
Loop at PITB2_ZLINF0-ZL.
endloop.
Endloop.
Thanks...
Preetham S -
PO Price Value not coming in report
Dear Gurus,
I have problem that when i run report mb51 for a plant and movt. type 101.In purchase order no of line items there.from all line items some of line items not showing po. price value they are showing 0 amt. but this amount exist in GRN doc or Posting Doc. What is the problem that standard report not showing amt for particular line item .Pl help to solve this problem.
Thanks
AbhinavHi
Check once PO item value has been decreased (once GR and IV has been completed on PO you can alter the PO value which will have no effect) and also check deletion indicator/ blocking has been set for PO item.
Thanks -
HOW CAN I PASS A DEFAULT VALUE IN INTERNAL TABLE
HOW CAN I PASS A DEFAULT VALUE IN INTERNAL TABLE.
DATA : BEGIN OF ITAB OCCURS 0,
FIELD1(2) TYPC C DEFAULT '12',
FIELD2 TYPE C ,
END OF ITAB1.
IT'S GIVING ERROR MESSAGE.
PLZ LOOK INTO THIS AND GIVE ME CORRECT SOLUTION.
THANKS
SURIDATA : BEGIN OF ITAB OCCURS 0,
FIELD1(2) TYPC C,
FIELD2 TYPE C ,
END OF ITAB1.
itab-field1 = '12'.
itab-field2 = 'A'.
append itab.
clear itab-field2.
itab-field1 = '12'.
itab-field2 = 'B'.
append itab.
clear itab-field2.
Now everytime u'll have the value for field1 = '12'.
Regards
Vasu -
How can i pass calculated value to internal table
Hi
i have to pass calculated value into internal table
below field are coming from database view and i' m passing view data into iznew1
fields of iznew1
LIFNR LIKE EKKO-LIFNR,
EBELN LIKE EKKO-EBELN,
VGABE LIKE EKBE-VGABE,
EBELP LIKE EKBE-EBELP,
BELNR LIKE EKBE-BELNR,
MATNR LIKE EKPO-MATNR,
TXZ01 LIKE EKPO-TXZ01,
PS_PSP_PNR LIKE EKKN-PS_PSP_PNR,
KOSTL LIKE EKKN-KOSTL,
NAME1 LIKE LFA1-NAME1,
NAME2 LIKE LFA1-NAME2,
WERKS LIKE EKPO-WERKS,
NETWR LIKE EKPO-NETWR,
KNUMV LIKE EKKO-KNUMV,
GJAHR LIKE EKBE-GJAHR,
and now i want to pass
one field ED1 which i has calculated separatly and i want to pass this value into iznew1
but error is coming that iznew1 is a table with out header line has no component like ED1.
so how can i pass calculated value to internal table iznew1,When you declare your internal table , make an addtion occurs 0
eg . data : begin of iznew occurs 0 ,
fields ...
add the field here ed1.
end of iznew.
now when you are calculating the value of ed1,
you can pass the corresponding value of ed1 and modify table iznew.
eg
loop at iznew.
iznew-ed1 = ed1.
modify iznew.
endloop. -
Is there any way to pull in movies from an external HD if my internal is full
Is there any way to pull in movies from an external HD if my internal is full?
I can make PHONE CALLS from my iPhone 6 on my MacBook???
(And then, I assume, my iPad?) -
How to find value in internal table
Hi,
I'm trying to search a value in internal table by using the FIND TABLE syntax but there's an error message saying In CHAR MODE a character-like, or in BYTE MODE a byte-like field is expected as the row type for the table "ITABLE". The internal table already has character-like field.
Here's the code:
FIND ALL OCCURRENCES OF w_itable-ordno IN TABLE itable RESULTS results.
Wherein:
w_itable-ordno contains the value that I need to find
itable is the internal table that has data
Thanks.
KathHi Kathy,
I dont think you can use the given syntax in unicode envoirnment.
As i understand, you are trying to find a value in your internal table. Why dont you make use of LOOP or READ statements. That would be a better option.
Best Regards,
Ram. -
How to update value in internal table from cdpos taking fname n value_new?
hello everyone,
i want to insert value in internal table from cdpos table taking field name from fname and value from value_new.but the problem is i am not getting how to map the corresponding field of internal table with fname value which is the field name.
for example
i
fieldname
value
name1
raj
name2
sharma
i want to update field name1. this name1 is there in fname with updated value in value_new how to make name1 with fname value
thanks and regards
laxmikant soniHi Laxmikant,
If I have understood your requirement correctly, you need to update an internal table with latest 'value_new' from cdpos table where 'fname' = 'fieldname' .
Hope the below logic will help you:
FIELD-SYMBOLS: <wa_intab> LIKE LINE OF lt_intab. "the internal table you want to change
LOOP AT lt_intab ASSIGNING <wa_intab> .
READ TABLE lt_cdpos INTO wa_cdpos "lt_cdpos contains latest data selected from CDPOS
WITH KEY fname = <wa_intab>-fieldname.
IF sy-subrc = 0.
<wa_intab>-value = wa_cdpos-value_new.
ELSE.
"//logic if the name is not there in CDPOS
ENDIF.
CLEAR wa_cdpos.
ENDLOOP.
If you wish to improve performance, I suggest using
1. "transporting value_new" addition in READ TABLE,
2. select only the data which you require from CDPOS,
3. create the internal tables with only fields which you require,
4. when you are using SELECT,LOOP AT statements, limit records by using WHERE condition
Regards,
Kavya -
I want to install yosemite via external hd but my internal hd is not showing in the utilise disk
please help i think I'm stuck
Have been trying every way i know and found on internet to install os x yosemite on my macbook pro 2.4GHz the final method i tried is to install via external hd since my new hdd don't have recovery on it i boot in successfully with the external hdd but my internal hdd is not showing up so i can not install on it. pleas help.It would be helpful if you indicated the EXACT model/year MBP that you have and the current OSX>
What is preventing you from installing Yosemite directly to the internal HDD?
Ciao. -
Search Help values to Internal table
Dear Friends,
Is it possible to export Search Help values to Internal table?
On screen, when user click on Search button, the SAP standard search help will call (Customer Search). After entering values, some result get displayed and this result need to export to the internal table.
Thanks in stack
NileshHi:
try this:
DATA : wa_shlp TYPE shlp_descr,
it_records LIKE ddshretval OCCURS 0 WITH HEADER LINE.
wa_shlp-SHLPNAME = 'MAT0M'. "one of elementary search help name from mara-matnr.
wa_shlp-SHLPTYPE = 'SH'.
CALL FUNCTION 'F4IF_SELECT_VALUES'
EXPORTING
shlp = wa_shlp
MAXROWS = 0
SORT = ' '
CALL_SHLP_EXIT = ' '
IMPORTING
MAXROWS_EXCEEDED =
TABLES
RECORD_TAB =
RECDESCR_TAB =
return_tab = it_records
LOOP AT it_records.
WRITE:/ it_records.
ENDLOOP.
Follows is how to get the search help name:
CALL FUNCTION 'DD_SHLP_GET_HELPMETHOD'
EXPORTING
tabname = 'MARA'
fieldname = 'MATNR'
langu = sy-langu
NO_CHKTAB_MAPPING =
GET_ENTITYTAB = ' '
CHANGING
shlp = wa_shlp
callcontrol = callcontrol
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
OTHERS = 3
CALL FUNCTION 'F4IF_EXPAND_SEARCHHELP'
EXPORTING
shlp_top = wa_shlp
IMPORTING
shlp_tab = shlps.
好运,
启明星 -
Passing a value from internal table to a powerpoint slide
Hi,
Does anyone know how to pass a value from internal table to a powerpoint slide? I would also need some codes with regards to the coding to open the powerpoint and insert the value in.
Thanks.
Points will be awarded.
Hope to hear from you soon.
Lawrencegeez!! do feel sorry for you
you can fire FM WS_EXECUTE to open power point but passing a variable at run-time i'm not sure, sorry. -
3rd largest value in internal table
How to find the third largest value in internal table.
please give me logic without using sort statement?
and how to find the 3rd largest value with using sort on internal table.
please give the both logic separately?
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 5:28 PMFirst sort the internal table. and read the 3 record by index.
if duplicate exists use delete adjacent duplicates and read the 3 record.
second method.
loop at itab into wa_itab.
if sy-tabix = 1.
lv_high = wa_itab-value.
else.
if lv_high > wa_itab-value.
else.
lv_high = wa_itab-value.
endif.
endif.
endloop.
loop at itab into wa_itab < lv_high.
if sy-tabix = 1.
lv_sechigh = wa_itab-vlaue.
else.
if lv_shigh > wa_itab-value.
else.
lv_sechigh = wa_itab-value.
endif.
endif.
endloop.
loop at itab into wa_itab < lv_sechigh.
if sy-tabix = 1.
lv_thirdhigh = wa_itab-vlaue.
else.
if lv_thirdhigh > wa_itab-value.
else.
lv_thirdhigh = wa_itab-value.
endif.
endif.
endloop.
Maybe you are looking for
-
Displaying special characters in ALV report.
Hi Experts, Can we display special characters in ALV reports? Special characters such as tick mark.(Like in character map(Font Bookshelf Symbol 7) of windows ). I tried with icons in ALV report, I was able to display tick icon in the ALV report, but
-
How insert Enterprise portal in Solution Manager
Hi guys, Can anyone explane me how can I insert an enterprise portal in Solution Manager? I have execute this steps: - transaction smsy - landscape components -> Systems -> Create New System With Assistant - Choose SAP Enterprise portal After that I
-
Master Page shows up as 1st Page in PDF
Hi I've created a multi-page form and am using a Master Page for a header & footer. When I preview the PDF, the Master Page is showing up as the first page. Any idea of what is going wrong here? Any suggestions appreciated. S
-
Song and Artist Name does not display in MiniPlayer
iTunes 11.0.0.163. In MiniPlayer, Song and Artist Name only appears when i play chinese songs, English names does not appear.
-
PXA_NO_SHARED_MEMORY
Dear Guys we are facing ABAP dump almost 1000+ can you please check and suggets solution Short text 600000 kilo bytes of shared memory for PXA not available. What happened? When starting the R/3 System, 600000 Kbytes of storage space was