Conversion of Quantity from German to the US format

Is there any Function Module to convert Quantity from German format to the US format?
Ex: US Format 3,000.00 = German Format 3.000,00
Thanks and Regards,
Vijay

You can use the CURRENCY extension of the WRITE statement.
write us_value to de_value CURRENCY 'DEM'.
Check table TCURX for the german currency.
Regards,
Rich Heilman
Found the currency key....
Message was edited by: Rich Heilman

Similar Messages

Is it possible to download and read books from Waterstones in the ebook format on iPad. If so how? Is there any need to download an app? Thanks

Is it possible to download and read books from Waterstones in the ebook format on iPad. If so how? Is there any need to download an app? Thanks

People who sell ebooks normally tell you what you need to read them, e.g.
http://www.waterstones.com/waterstonesweb/pages/help-ebook-faqs/200001173/

Date conversion from Excel to the SAP format

Hi,
I have created a BDC program which uploads daat from Excel sheet.
There is a date field also, the format of which can be any as per the end user (it will be one of those allowed by SAP).
However, the file will be used for execution by another user who may have a date setting which is different than that from the one in Excel.
Eg. End User's date format: DD.MM.YYYY, SAP User's date format: MM/DD/YYYY
So, how do I convert the date format from excel to the format which will be accepted by the transaction during the recording?
Regards,
Dave

Hi Dave,
I have faced the same issue while uploading the date to the bdc.
if ur date format is DD.MM.YYYY in the excel file, first of all you need to change this to dats format ie YYYYMMDD ie character8 format and pass to the bdc, it will automatically convert to sap format
ie you need to convert splitting at .
data lv_date type char10,
        lv_dd type char02,
        lv_mm type char02,
       lv_yyyy type char04,
v_date type char08.
lv_date = '30.12.2011'.
split lv_date at '.' into lv_dd lv_mm lv_yyyy.
if strlen(lv_dd) lt 2.
   concatenate '0' lv_dd into lv_dd.
endif.
if strlen(lv_mm) lt 2.
   concatenate '0' lv_mm into lv_mm.
endif.
concatenate lv_yyyy lv_mm lv_dd into v_date.
"Please use the variable V_DATE to populate to ur bdc"
Edited by: Rahul Babukuttan on Aug 11, 2011 5:35 PM

How to skip 3 chars when use "scanf from string" by the parameter "format string" ?

hi, I want to read a num 123 from the string like that "sfg123" "fgd123" "ghj123"
I know that I can use "%3s" to skip 3 chars, but it will add an output to "scanf from string"
So, how to use parameter "format string" not only to skip 3 chars, but also add no output to the "scanf from string"
Solved!
Go to Solution.
Attachments:
1.JPG ‏15 KB

Hi Chenyin,
Try this VI....
I think... This is what you are expecting....
<<Kudos are welcome>>
ELECTRO SAM
For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life.
- John 3:16

How can I permanently change the date format from the American format to the UK's without having to constantly change it manually every time I start a new spreadsheet?

This is my first mac so I'm still getting my bearings with it. I've only used Windows programmes before. I can't understand why it's so hard to change the date format of the cells in Numbers to keep it showing the UK format. The system preferences of the mac show that it's in the correct region and has the correct date but this doesn't seem to transfer into the Numbers program. I was very impressed with the mac until I discovered this. If anyone knows how I can get the date to stay in the correct format without having to go through the process of altering it in the cell inspector everytime then I would be very grateful.

Numbers & most apps, especially those from Apple, use the date format you have set in System Preferences > Language & Text > Region. You can then choose UK from the Region drop-down list. Mine says Custom because I've defined things further as in the second screenshot.

HT1688 Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it

Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it out

Hi Elaine
Here si what I do:
Since I tend to message with teh same people I leave the messages available to me. If you are in one conversation with "Karen" and want to message with "Kathy" tap the message back arrow and select Kathy.
As always just be careful to rememeber who you are messaging to!

Conversion from German to English to convert a filed of table EKPO

Hi Guys,
I want to know how to convert a filed of particular table from German to English for EKPO-MEINS field. This is a unit of measure field which I'm checking from SE11, it shows it in german (LE instead of ACT, MON instead of MO etc). I'm using call function reuse_alv_grid_display and the output for all unit of measure fields are coming in german and other fields are coming in english. This problem arises after upgrade from 4.6c to ecc 6.0. In 4.6c it is working fine. Please tell me how to change it to english.
Thanks,
Awanish

Hi,
Sorry...Not sure what you are looking for..
But the description says "Settlement type" for the field PERBZ
Thanks,
Naren

How do i change the language from german to english

i have ps cc and want to change the language from german to english

Here is an illustrated guide to changing the language in CC.
http://forums.adobe.com/message/5713507#5713507

How do I change the app store language from German to English?

How do change the language on the app store and I tunes from German to English ?

Sorry. From the UK App Store terms and conditions:
"The Service is available to you only in the United Kingdom. You agree not to use or attempt to use the Service from outside this location. iTunes may use technologies to verify your compliance."
http://www.apple.com/legal/itunes/uk/terms.html#SALE
In the German terms and conditions:
"In den Stores erworbene Geschenke können nur für Personen in Deutschland gekauft und nur von Personen in Deutschland eingelöst werden."

Conversion from German to English

Hi Guys,
I want to know how to convert a filedname of particular table from German to English for ex:COBRB-PERBZ.
Thanks,
Gopi.

Hi,
Sorry...Not sure what you are looking for..
But the description says "Settlement type" for the field PERBZ
Thanks,
Naren

What are the commonly used conversion routines apart from alpha conversion?

hi all,
Can any one let me know the commonly used conversion routines apart from alpha conversion routines ?
thanxs ina dvance
hari

Hari
There are lot of conversion routines, like
BUCAT Conversion Routine. eg. The BUCAT conversion routine converts the internal presentation of the budget type
(0BUD_CAT) into the external presentation (0BUD_CAT_EX), using the active entries in the
master data table for the budget type InfoObject (0BUD_CAT).
see the link below for all the routines.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b9119290-0201-0010-69af-96fe3bf00243
assign points if helpful
Kalyan

Currency conversion issue in SPM. We are getting incorrect results with SPM conversion function from one of the document currency to USD.

Currently we are using SPM 2.0 version and we have been facing currency conversion issues.
Please help me in following aspects.
1) Where actually currency conversion happens in SPM. Is it the global program which does the conversion or other way.
2) We have conversion issue for one of the currency where conversion function is giving incorrect results when converting from one of the document currency to USD. here The respective document currency is considering the 1:1 ratio with Dollar which is actually incorrect.
3) We have verified in both BI side(currency tables) and even ECC side.
Please help me in understanding this issue and let me know if you need more information on this.
Its an production issue and appreciated your immediate inputs.
Thanks
Kiran

Hi Arun,
The following information may be helpful to you.The SSA_HELPER_PROGRAM has options regarding currency settings.
EXCH_RATE_TYPE: This flag governs the exchange rate type which will be used for currency conversion in data management. For example if RSXAADMIN contains an entry EXCH_RATE_TYPE = „ZSPM‟ then the conversion type used for currency conversion is ZSPM. The default value for the exchange rate type is „M‟. More details can be found in the note 1278988.
CURRENCYCONVERSION: By default data management converts all the measures in transaction currency to reporting currency and copies over to the corresponding measure in reporting currency. If the measure in reporting currency is already available in source it might be desirable to disable the currency conversion. To disable the conversion you can make an entry CURRENCYCONVERSION = „ „ in the table RSXAADMIN. This can also be achieved by running the program SSA_HELPER_PROGRAM with the option DEACTIVATE_CURRENCYCONVERSION. The conversion can be reactivated by running the same program with option ACTIVATE_CURRENCYCONVERSION.
UNITCONVERSION: Similar to above. To deactivate unit conversion you can use the program with option and DEACTIVATE_UNITCONVERSION and to reactivate ACTIVATE_UNITCONVERSION. By default both the conversions are switched on
EXTERNAL_CURRENCIES: Normally most of the international currencies are stored with two decimal places however certain currencies do have 0 and 1 decimal place too. For example JPY has 0 decimal places. SAP internal format stores even these currencies with 2 decimal places and at the time of display it changes the value to right decimal places. In case a file from external source is loaded to SPM it might have the format with 0 decimal places in the file. To convert it to SAP standard format post processing needs to be done on this value. If that is the case you can set the flat EXTERNAL_CURRENCIES = „X‟ in the table which will enable the post processing for these values. This flag can also be set and reset using the helper program using the option TURNON_EXT_CURRENCY_FORMAT and TURNOFF_EXT_CURRENCY_FORMAT.
Kind Regards,
John Harris
Senior Support Engineer, SAP Active Global Support

Can I get a copy of text conversations from one of the numbers on our account?

I just wanted to see if there was any way I can get a print out of converstaions from one of the phone numbers on my account....

Only way is through the court system and a subpoena. Message must have occurred in the last 10 days tops.

How to change the itunes store language from german to english

The language on iTunes store and apps store on my iPad is set to German, how can I hange it to English?

Katjoh,
Each iTunes country-specific Store has only certain languages available. For example the iTunes Stores in Germany and Austria can only be used in German, while the Switzerland store has English, German, and French.
For more information,, check this document:
iTunes: Changing the display language

How to Fetch Sales Order Item Quantity from Customer table(ztable)?

Dear Guru's,
My scenario:
While creating Sales order the item quantity should be fetched from a Ztable. So iam using the Userexit "V46H0001 - - Customer functions for resource-related billing", in that i have implemented my code in the Function Exit - EXIT_SAPLV46H_001 and the FM documentation says
This function module allows you to change item information for generating a new item.
In order to achieve this, you must change the relevant field in the structure C_VBAPKOM.
So i activated that exit and wrote the following code to test it as follows;
break-point.
C_VBAPKOM-zmeng = 10.
But it seems not working, even it doesn't stop at the break-point when i type the material number for the item in the sales order and press enter...
Please guide me in this regard, am i correct in choosing the User-Exit? what else have to be done in order to fetch the item quantity from the ztable....
Please suggest if there is some other way to do this, i also heard that we can do this through Routines...
Thanks in Advance...
Regards
Karthik D

I have solved this and you can found how i solved in the last reply of the following thread....
[SD UserExit - V46H0001 - Customer functions for resource-related billing|SD UserExit - V46H0001 - Customer functions for resource-related billing]
Thanks
Karthik D

Conversion of Quantity from German to the US format

Similar Messages

Maybe you are looking for