Currency conversion issue in SPM. We are getting incorrect results with SPM conversion function from one of the document currency to USD.

Currently we are using SPM 2.0 version and we have been facing currency conversion issues.
Please help me in following aspects.
1) Where actually currency conversion happens in SPM. Is it the global program which does the conversion or other way.
2) We have conversion issue for one of the currency where conversion function is giving incorrect results when converting from one of the document currency to USD. here The respective document currency is considering the 1:1 ratio with Dollar which is actually incorrect.
3) We have verified in both BI side(currency tables) and even ECC side.
Please help me in understanding this issue and let me know if you need more information on this.
Its an production issue and appreciated your immediate inputs.
Thanks
Kiran

Hi Arun,
The following information may be helpful to you.The SSA_HELPER_PROGRAM has options regarding currency settings.
EXCH_RATE_TYPE: This flag governs the exchange rate type which will be used for currency conversion in data management. For example if RSXAADMIN contains an entry EXCH_RATE_TYPE = „ZSPM‟ then the conversion type used for currency conversion is ZSPM. The default value for the exchange rate type is „M‟. More details can be found in the note 1278988.
CURRENCYCONVERSION: By default data management converts all the measures in transaction currency to reporting currency and copies over to the corresponding measure in reporting currency. If the measure in reporting currency is already available in source it might be desirable to disable the currency conversion. To disable the conversion you can make an entry CURRENCYCONVERSION = „ „ in the table RSXAADMIN. This can also be achieved by running the program SSA_HELPER_PROGRAM with the option DEACTIVATE_CURRENCYCONVERSION. The conversion can be reactivated by running the same program with option ACTIVATE_CURRENCYCONVERSION.
UNITCONVERSION: Similar to above. To deactivate unit conversion you can use the program with option and DEACTIVATE_UNITCONVERSION and to reactivate ACTIVATE_UNITCONVERSION. By default both the conversions are switched on
EXTERNAL_CURRENCIES: Normally most of the international currencies are stored with two decimal places however certain currencies do have 0 and 1 decimal place too. For example JPY has 0 decimal places. SAP internal format stores even these currencies with 2 decimal places and at the time of display it changes the value to right decimal places. In case a file from external source is loaded to SPM it might have the format with 0 decimal places in the file. To convert it to SAP standard format post processing needs to be done on this value. If that is the case you can set the flat EXTERNAL_CURRENCIES = „X‟ in the table which will enable the post processing for these values. This flag can also be set and reset using the helper program using the option TURNON_EXT_CURRENCY_FORMAT and TURNOFF_EXT_CURRENCY_FORMAT.
Kind Regards,
John Harris
Senior Support Engineer, SAP Active Global Support

Similar Messages

HT4929 I have os x 10.6.8. When I try to update it says there are no updates for my sytstem. I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?

I have os x 10.6.8. When I try to update it says there are no updates for my system. I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?

Welcome to the Apple Community.
You can purchase Lion from the Mac App Store. You will need to meet the requirements for Lion, but the Mac App Store will tell you whether your Mac is capable of running Lion or not.

Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

Are you in DSL? Do you know if your modem is bridged?
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

Can I get a copy of text conversations from one of the numbers on our account?

I just wanted to see if there was any way I can get a print out of converstaions from one of the phone numbers on my account....

Only way is through the court system and a subpoena. Message must have occurred in the last 10 days tops.

When trying to open a PDF format using Adobe XI I get an error message that there's a problem opening the document (57)

When trying to open a PDF format using Adobe XI I get an error message that there's a problem opening the document (57)

Hi chasore,
Are you still facing this issue?
Is this issue happening with all the documents you have. If yes, i would suggest try uninstall and reinstall. Or if the documents are located on some shared drive try to copy them on local machine and test again.
Regards,
Ajlan Huda.

I need to populate the Document Currency in the COPA analysis. At the movem

I need to populate the Document Currency in the COPA analysis. At the movement Overhead reporting is Profitability Analysis Cube in BW. Now they want to Include the document currency in the reporting and they want add the field document currency and currency key. Can any one tell how to create the Document currency in COPA Analysis please. Thank you

Hi,
CO-PA will only store values in either operating concern currency or company code currency (if active). The fields FRWAE and KURSF are just for the line item display in transaction KE24 when pressing 'entry/op currency'. COPA does not store values in the document ccy.
The 'foreign currency' in the PA line item always contains the currency that was used for the conversion, but does not contain the document currency of the original document. So only in case the document currency was used for the translation of the PA values the foreign currency will be equal document currency.
In case of SD documents, CO-PA always uses the document currency as base of the conversion in order to transfer values of statistic condition types consistently.
In case of FI/MM documents system uses the company code ccy as the base for conversion into operating concern ccy (foreign ccy).
regards
Waman

Getting poor results with Refine Edge tool

Not sure if anyone else has run into this issue. But after following numerous tutorials on lynda.com as well as tv.adobe.com and youtube, I just can't get good selection results using the Refine Edge tool in Photoshop CC and I'm convinced it's something I'm doing wrong, but I have no idea what.
After downloading this Wikipedia image of Bismarck for a history documentary, I tried isolating the figure from the background using Refine Edge and keep getting poor results. Maybe it's my settings, I'm just not sure. But after painting over my edges, I end up with terrible results. Unfortunately, I'm getting poor results with other images as well. Can anyone venture to guess what I might be doing wrong? Thanks very much in advance.

Hi ninose11,
For this type of project and idea, I would recommend trying some of the magnetic lasso tool. The tool is located as the third tool in the toolbar (you should see a lasso or rope looking icon), hold down the icon and it should expand - then select the magnetic lasso tool. The magnetic lasso tool will allow you to scroll over the edge of his profile and it will automatically detect the outline edges. The slower you roll-over the shape the higher the accuracy will be. If the magnet is not detecting a particular edge or sharp corner (for example, the ear) you can manually drop points by simply right-clicking at any point during the selection. If the edge is too sharp, you can also create a light feather which will blend the edge softly (this should be located at the top).
If this is unsuccessful still, you can try selecting by color, using the Magnetic Wand Tool (forth icon in the toolbar, again hold down for all options). Once you are using the magnetic wand tool, you should be able to select all the black areas of the background to delete. You can increase or decrease the tolerance to change the sensitivity of the selection.
Hope this helps!

Getting "cannot connect to iTunes store error from one appleID but another works fine

I have 2 apple ID's, a personal one, and one that me and a couple of coworkers share so that we can share apps we purchase. I cannot log into the shared AppleID from my ipad. I can from my PC so I know it is not an incorrect password or anything like that. I get the error "cannot connect to iTunes Store". Is this because too many of us are logged into the same apple ID at once? I tried changing the password so that it would kick everyone else off, but even with a new password I get the error. I am able to login with my personal apple ID just fine, so I know it's not an issue with my wifi or my ipad software (i don't think). anyone else experienced this and found a solution?

Hello 66ladybird88,
I understand you are trying to access the iTunes Store on your Windows computer but are getting an alert with the number 0x80092013. There is an article that address this kind of alert and has some great troubleshooting steps for resolution. I understand the alert in the article is slightly different than the one you are getting but I recommend the same steps listed.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
Resolution
The cause for these issues is a program that monitors the Winsock protocol for Windows conflicting with Apple software. These programs usually use a Layered Service Provider (LSP) that can help identify the particular program installed. The programs that monitor this protocol have a variety of purposes, including security software, content filtering, and optimization of network traffic.
Thanks for reaching out,
-Joe

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

Hi,
According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
Roger Lu
TechNet Community Support

How do i get in touch with Verizon when I'm out of the country?I am in Ecuador and cannot get in touch with Verizon to end my service!

We moved to Ecuador and need to get in contact with Verizon to end our service. The number they provided does not work. ONE time it worked. I dont know why it doesnt now. Also the chat line is not ever available when I am on line.
When I did talk they said they ended my service and that I just needed to pay the $200 to end the contract. But when i go on line to my bill, they are charging me another months usage it looks like. I dont know what to do anymore. any suggestions?

This link gives a 24 hour support number. http://m.prnewswire.com/news-releases/did-you-know-verizon-wireless-customer-support-travels-with-you-98413889.html

Display the document currency instead display Currency in Report

Hi Experts,
I am having a query in support system, in that one characteristic called document currency is there under Unit Dimension and this Doc currency info object having the Display currency and Document currency as Variables. Document currency Info object is in Free characteristics without related variables (Disp.curr and Doc.curr)
When I execute the query defaultly Display currency will appear as a variable in selection screen, because customer exit(cmod) has created like that
Now user want to display the document currency instead Display currency in the report, may I know how can I solve this problem?
Here I am unable to get the customer exit detatils and which program is there in CMOD, can anyone suggest me, how I will get the details?
And one more requirement in this CR, that is user want to display the key figure amount in the report should be displayed with the document currency amount only
May I know, want to do any settings for this?
Thanks to All
Regards
Mrudula

Hi rajesh,
1.customer exit value you can change in CMOD,select your project and go to components and select EXIT_SAPLRRS0_001.there go to include zxrsru01,and change display variable to document currency variable.
2. if u want to display your key figure value in document currency ,,go to that key figure info object ,,,in currency ( reference) field give document currency info object.Then map the respective amount value again in transformation.load the data, now in report document currency will be displayed along with key figure amount.
Thank you,
Joseph

We had some accuracy issues with NI 5112 scope in one of the ATE and then I decided to perform self calibration using Labvidew vi to perform "niScope_CalSelfCalibrate(handle, "", 0);" function.

We had some accuracy issues with NI 5112 scope in one of the ATE and then I decided to perform self calibration using Labvidew vi to perform “niScope_CalSelfCalibrate(handle, "", 0);” function.
But it made it worse. I tried using option 2 to restore but it did not work.
Could you pls advice me to resolve this issue.

Hi Ana10,
Are you using this digitizer with NI VideoMaster? if not you should probably post this in the Digitizer forums. That said I would suggest using the self calibrate function in MAX for this device rather than the LabVIEW API method just so that you can rule out any errors in correctly configuring the digitizer for self cal in LabVIEW. Also you should ensure that all inputs are disconnected before performing a self cal. If this still results in an error in calibration you could refer to the following document or arrange to return the digitizer to NI for external calibration.
http://www.ni.com/pdf/manuals/370328e.pdf
Hope this helps,
Nick

HT3819 how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?

how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?

Oops, I forgot a step between 7 and 8 ... before syncing the iPhone I need to explicitly send the document back to iTunes on the iPhone, or the changes won't come over at all ...
and then one more thing ... Numbers on iOS does NOT recognize a number of key features of the OSX app, such as conditional formatting ... so after editing my document on iOS and syncing it back to OSX on my Mac, all of those settings are lost (no more conditional formatting, have to do it all over again)
What am I doing wrong ?

When I try to open a pdf file I get an error message stating "There was an error opening the document. The file is damaged and could not be repaired." Other pdf files open fine.

When I try to open a pdf file I get an error message stating "There was an error opening the document. The file is damaged and could not be repaired." Other pdf files open fine.

You need to get a new copy of the PDF.

When I try to combine two pdf's, it asks for a permission password and says the documents are protected; however, I didn't put any protection/security in the documents. I assume it is a default security under the enhanced security settings of the Acrobat

When I try to combine two pdf's, it asks for a permission password and says the documents are protected; however, I didn't put any protection/security in the documents. I assume it is a default security under the enhanced security settings of the Acrobat Pro XI which I recently purchased.

Acrobat (Pro or Standard) does not apply a "default" protection. It appears that someone or some other process has applied protection.
Be well...

Currency conversion issue in SPM. We are getting incorrect results with SPM conversion function from one of the document currency to USD.

Similar Messages

Maybe you are looking for