Convert dual boot to RT

Hello all,
Does anyone know if it is possible to convert a dual-boot controller to RT only? I have a hard disk that just died and to simplify things I would like to install RT only on the new drive as we are moving over to RT only. The PXI controller (8110) ships with backup software, but you have to install both Windows and the RT OS if using this. Any thoughts are appreciated.
Thanks, Matt
Matt Richardson
Certified LabVIEW Developer
MSR Consulting, LLC
Solved!
Go to Solution.

Hi Matt,
Sorry for the lack of clarity. Here are the steps to follow.
1. Boot controller into RT Safe Mode. In the left pane in MAX, right-click the target and select "Format Disk."
2. After completion, reboot controller into LabVIEW RT. In MAX, the target should appear in its default state, without any user-defined settings or parameters.
3. Expand the target in the left pane of MAX, and right-click the item labeled "Software." The only option that will appear is "Add/Remove Software." Selecting this item will launch the RT Software Installation wizard, which will walk you through installing the necessary software on the target.
Let me know if you have any other questions, and have a Happy Thanksgiving!
Andy H.
National Instruments

Similar Messages

Convert PXIe-8135 controller to dual-boot Windows 7 and LabVIEW RT

Hello. I have a PXIe-8135 controller that originally was just running Windows 7. We are trying to convert it to a dual boot system to also run LabView Real Time. (There is host computer that will run LabVIEW 2014 with the RT module, and the controller will become a target).
I have created a FAT32 partition on the hard drive of the controller. Now, I’m trying to install the real-time OS with a USB flash drive made using the MAX utility, but I cannot boot using the USB drive for some reason. I keep getting the message “waiting for USB device to initialize”.
In BIOS, legacy USB support is [ENABLED] and boot configuration is set to [Windows/other OS]. I’ve tried removing the drive, waiting, and reinserting. I’ve tried two different USB drives (both 8 GB, different brands).
I’m not sure what to do next. Apart from the USB boot issue, is converting the PXIe-8135 even possible? I read about SATA/PATA hard drive issues with older controllers, but I don't know about this one.
Thanks, in advance, for your help!
-Jeff
Solved!
Go to Solution.

Per Siana's licensing comment, more information on purchasing a deployment license if you do not have one for this target can be found here.
The RT Utility USB key is used to set up non-NI hardware with LabVIEW Real-Time, but you should not need it in this situation to convert to dual-boot (*). Try this:
1. Since you already have a FAT32 partion created, go into BIOS setup and change to booting 'LabVIEW RT'.
2. The system will attempt to boot LabVIEW RT, see that the partition is empty, and switch over into LabVIEW RT Safe Mode. (this safemode is built into the firmware, which is why you don't really need the USB key).
3. The system should come up correctly and be detectable from MAX, and you can proceed with installing software.
4. To switch back to Windows, go back to BIOS setup and choose 'Windows/Other OS'
(*) One area where the USB key is helpful on a dual boot system is with formatting the disk. If you want to convert from FAT32 to Reliance on the partition designated for LabVIEW RT, the USB key lets you attempt to format a single parition and leave the rest of the disk untouched. If you format from MAX, the standard behavior is to format only one RT partition if found, but if not found, it will format the entire disk. Formatting from MAX on a dual boot system is consequently riskier and you could lose your Windows partition.

Dual Boot Win 8.1 & Win 7

I've just taken delivery of a 15-p011na laptop.
This has Windows 8.1 & a 1TB HDD with 5 apparent partitions seen with AOMEI Partition assistant as follows:
*: WINRE NTFS 650.00MB capacity 421.48MB used
*: FAT32 260.00MB capacity 117.95MB used system
*: Other 128.00MB capacity 0.00MB used
C:Windows NTFS 908.78GB capacity 42.31GB used Boot
D:Recovery NFTS 21.71GB capacity 19.57GB used
I would like to create a dual boot with Windows 7 so that I can copy my Windows 7 (32 bit) drive from my old computer to another partition. I have tried shrinking the size of C partition and then installing Windows 7 32 bit on the unused partition. However, I get an error saying that the drive is GPT and I've read that the only way around this is to convert the whole drive to MBR which can be done on the fly with a utility like AOMEI Partition Assistant.
However, MBR will only recognise up to 4 partitions and I would require 6 with the shrunk C partition so can I get rid of the 3 small partitions or will this affect the drive? I have already made a copy of the restore software onto DVD's.
Failing that perhaps I can boot from my old Windows 7 drive as an external USB drive but any attempt to boot from it just crashes and I've tried using Paragon Adaptive resore but the USB drive isn't recognised.
Any ideas would be greatly appreciated.
TIA.
Geoff.

Paul
Given what the cable does and what device manager looks like it is a driver issue. Their driver. Your best bet is to contact the developer BUT I do wonder if you have tried re-installing the driver in compatibility mode for win 7
To install in compatibility mode do the following:
Right click the installer>properties>compatibility>choose OS
http://windows.microsoft.com/en-US/windows-vista/Make-older-programs-run-in-this-version-of-Windows?SignedIn=1
(works in vista, win 7, win 8, and win 10)
Wanikiya and Dyami--Team Zigzag

Dual Boot Windows 7 & XP Pro

I have a new X61, 160GB drive that came with Vista. It's been upgraded to W7. My office uses software that is not compatible with W7, therefore I'd like to create a partition and create a dual boot to XP. I have about 70GB free. Question, does dual booting on this PC cause any issues? Will I have to reload all the drivers for the ThinkPad features? Would it more prudent to convert the entire OS to XP Pro? Thanks, Chigger5788

It's been many, many years since I don't do dual boot anymore. Don't find the reason to do it, either. Different kinds of virtualization should be enough. Anyway...
dfw1417 wrote:
It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
ENJOY! This is the BEST machine I ever had!
WHICH machine?
Cheers.
If I helped you, please give me some kudos! ^^

HOW TO DUAL BOOT W540 with windows 8.1 / 7

I got my W540 recently with windows 8.1 pro on it. but as all engineers worst nightmare windows 8 has hard time with engineering softwares (for my case TIA Portal for PLC programming software which only support windows 7). so i need to have a windows 7. i prefer to keep my windows 8 and have dual boot system with windows 7 added. But i can't install windows 7. initially due to disk type (GPT), then i changed it to MBR without losing my files (which only was possible if i had deleted the recovery partition- now my recovery is on my flash drive). But there are already 4 partitions on the system (1 for C: drive and 3 for recovery and system files which came originally with the product) , how can i install a windows 7? i can't add another partition because that makes my disk a Dynamic disk (which i don't really know what is). all in all, i really need windows 7 on my system ASAP. If anyone know how to fix this please reply. Thanks guys.
Solved!
Go to Solution.

You are limited to four PRIMARY partitions on an MBR disk.
But other than the "active" partition (i.e. the small 100MB "system reserved" partition where Boot Manager is placed from doing a cold Windows install on an empty drive, or the 1.4GB equivalent Boot Manager partition that Lenovo provides along with other tools and utilities), all other partitions on the drive can be "logical". They are not required to be PRIMARY, although Lenovo delivers its partitions that way. But you can change that.
You can have up to 120 LOGICAL partitions on a drive (all of which live inside an originally PRIMARY partition which gets converted to an "extended partition" which houses all of the logical partitions. So if you have at least one logical partition (and thus have to give up one primary partition in order to build that required "extended partitions"), that means you can have up to three remaining primary partitions and up to 120 logical partitions... all on an MBR disk. No "dynamic", and no GPT.
Yes, that means even the Windows system partition itself (i.e. "C") can be on a LOGICAL partition. It's only that one "active" partition (where the BIOS goes to find Boot Manager and its menu, and kick off the rest of the system boot process) which truly must be PRIMARY. That's the only requirement.
So, if you want to use MiniTool's Partition Wizard to carve out sufficient free space for your second Windows 7 partition (by shrinking your existing Win8 partition), you can create one or more logical partitions inside that new free space, and do the Win7 install to one of those empty logical partitions. You can then use a second logical partition in that same free space for "data", if you want.
Note that Partition Wizard can even convert one of your existing primary partitions to logical (i.e. convert it to an "extended partition", inside of which will be then be the original primary partition now converted to logical). You can then shrink or move/resize the partitions on the drive (both primary and logical) however you want, to perhaps make room for additional "logical" partitions inside of that now present "extended partition" which can hold up to 120. You can even convert ALL of your primary partitions except for the one "active" partition (which MUST BE PRIMARY) to logical partitions, which gives you maximum flexibility in having even more than just two bootable OS's along with one or more data partitions, etc., up to 120 logical partitions... plus the one "active" primary Boot Manager "system reserved" partition which must be kept.

Dual Booting Windows 7 and Linux on a IdealPad Y580

Okay, I am a gradaute student and need to have linux dual booted with windows 7 on my y580. It currently has windows 7 on it. However, it already has four primary partitions.
C:/ Windows OS
A hidden OEM
D:/Lenovo
And a boot system drive.
Is there anyway to convert one of thse drives into an extended partition ? HowCan I delete one of the partitions ? did you guys get your dual boots to work in this case. Please list step by step if possible.

Hello and welcome,
You can probably finagle the partitions to allow for dual boot: copy the contents of D: to C: and delete D:, for instance. Speculating, since I don't have an IdeaPad to test on. You usually/probably/maybe lose the OneKey Recovery feature if you touch the partitions.
Others here on the Linux board may have been able to preserve OKR, but I'll leave that to them to describe since I haven't done it.
Long way of leading up to the question: is it sufficient to run Linux in a virtual machine, or as a WUBI install within windows? That keeps things simple and makes backups much easier as well.
Whatever you do, burn your recovery media first. Now.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Upgrading from 320gb hdd to 128gb ssd on Mac Pro dual boot.

I have a Mac Pro 2008 with a 320gb hdd and I want to convert it to a 128gb ssd. I have it dual boot from one drive partitioned 50/50. I was wondering how I should transition from hdd to ssd. The drive has less than 120 gb on it and the Mac Pro runs Mavericks and Windows 7.

Pop SSD into drive bay with adapter in FW800 drive adapter, use CCC to clone system and recovery partition.
As for Windows, it needs about 80GB at least esp. on an SSD. Use WinClone to make a restore image.
Samsung 840 EVO 250GB is $144 on Amazon and the 128GB is $80. I look at the 500GB $299 and think, "why not."
you could leave for now the slow old 320GB hdd for Windows and hold a backup for OS X.
Your system,either one actually, should only have OS and apps on boot drive, very little if any data, just 3-4GB for AppData or ~/LIbrary to hold preferences, mail and minimal data.
Convert, as in clone the system.

Deleting dual boot OS

i only found one post that was somewhat applicable to my issue of removing a dual boot (http://forums.lenovo.com/t5/ThinkStation/Thinkstation-E20-Dual-boot-from-Windows-7-into-XP/m-p/21871... and that led me on a merry chase. if this is useful to anyone else, great - if posting a solution as an FYI is inappropriate and i should wait to reply to someone with the same issue, pls let me know
the situation: my former IT guys installed W7 Pro x64 (thx, Lenovo, for the free upgrade from Vist Business ) on a new partition alongside XP Pro x32 and it worked great, but i only kept using XP for my !@#$%^ genius scanner, which i have never gotten to run under XP Mode/Virtual PC in W7.
one day, after several months of XP inactivity, i decided to boot into it for some reason and had a BSOD. so then i set out to just eradicate the offending OS and its partition...simple, right? not in this case. i found the guys had put the W7 OS onto a logical drive not a primary:
Local Disk (C
156.71 GB NTFS
Healthy (Boot, Page File, Crash Dump, Logical Drive)
my boot.ini was on the XP partition and W7 uses bootmgr so i poked around and found that EasyBCD should take care of the issue by copying the boot.ini info to bootmgr on C:\ through this link in the SevenForums:
http://www.sevenforums.com/tutorials/209885-bootmgr-move-c-easybcd.html
again, not so easy. i could not move the bootmgr because of the logical status of the partition and also because the partition wasn't set to active; i converted the partition to active with no troubles under the native Disk Managment but failed when i tried to convert the partition to primary.i feared having to do a wipe and reinstall to tidy up as i saw some (forums unnamed) folks advocating.
i looked into it a bit further and found that i needed to use use a partition tool from bootable media (i used a CD with EaseUS Partition Master - the freeware version ) to convert to primary at boot and then i used the above link to copy the bootmgr to C:\ with EasyBCD
now my OS drive looks like so (the partition is large owing to the GIS files that like living there):
Local Disk (C
226.71 GB NTFS
Healthy (System, Boot, Page File, Active, Crash Dump, Primary Partition)
that solved the problem of the W7 OS being on an inactive, logical drive instead of an active primary - and in future if i set up a dual boot for any other OS, i'll make sure the disk is set as primary before i install and the backwater IT guys here will never touch my machine again
S10 - 642327A

HI Manish_5
"Is it possible to role back to my previous Windows 7 in future" but you have to create now the backup (recovery disk) to later use:
Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7) | HP® Support
Rollback:
Performing an HP system recovery (Windows 7)

Dual-boot LabVIEW RT/Windows 2000 on PXI

Is it possible to configure a PXI-based embedded PC (NI 8176) to run both LabVIEW RT and Windows 2000 in a dual-boot setup? I would like to use the same PXI system to do both real-time system prototyping as well as finished product testing - though not at the same time, of course.

Hi André,
Just to clarify, all dual-boot systems use the same hard drive for both operating systems. The floppy drive is used only for configuration. If you do not have a floppy drive, you can use a USB CD-ROM drive to load the recovery CD that ships with the controller. Please note that using the recovery CD may result in the loss of data from the previous Windows-only configuration. All of the important files should be backed-up prior to any recovery. For a better idea of what specific steps are involved, you can check out the following link:
http://digital.ni.com/public.nsf/websearch/227CF36870DB7BDB86256F790057F20F?OpenDocument
In particular, the section at the bottom goes through the process of converting to a dual-boot controller.
David H.
Applications Engineer
National Instruments
David H.
Systems Engineer
National Instruments

Syncing dual boot data: SL and Mavericks?

Hello Happy New Year to Us All!
I am wondering what to do to best keep user data between SL and Mavericks synced? I have an old Macbook Pro with Snow Leopard and I want to dual boot SL and Mavericks. My computer is an 8 gb RAM mid '09 15" Macbookk Pro w/ new 256 gb SSD and w/ original 500gb HD now in optical bay.
I've partitioned the SSD in 2 equal size volumes, one for each OS boot. SL is now running on one of the partitions, and I could make a third partition on the SSD for one possible shared data volume. (I know the SSD needs to keep adequate free space). The HD is ready for one or more data volumes, backup volumes etc. (I also have several external drives.)
So I have read that you can store your Home Directory in any folder on any volume you want using Advanced Options in the Admin account in Accounts.
Can my Snow Leopard boot volume and the Mavericks boot volume share the same Home directory or somehow same user data on one data volume? I assumed the answer is no and that the data is packaged differently b/w SL and Mavericks but a lifehacker article made me wonder: http://lifehacker.com/5702815/the-complete-guide-to-sharing-your-data-across-mul tiple-operating-systems.
Also Level 9 Baltwo seems to have a lot of experience with this.
https://discussions.apple.com/thread/5481468?tstart=0
https://discussions.apple.com/message/15728093#15728093
https://discussions.apple.com/message/17052849#17052849
But his posts on these threads indicate that he now uses separate data volumes. I wonder is that one for each of his separate OS boot volumes, and if so, why? Snyc advantages?
If this is the way to go, back to the main question: how to best sync the user data between SL and Mavericks?
--Simply figuring out which files to move by hand or get Carbon Copy Cloner to move? Learning to use Dropbox?
--SL workarounds for iCloud?
--Soho Organizer or Fruxx?
--a Snow Leopard Server?
--convert a user account to a network user account?
--other?
Thank you and I hope Baltwo and other will help me.
Stu

However, data can be shared if kept on a third data volume.
Hi Baltwo, thank you. Is sharing user data on a third volume an effective way to keep SL generated data and Mavericks generated data consistent and usable by both? If only one OS is running at a time and therefore the shared data is only used by one OS at a time each change, any change, would seem to be saved sequentially. What are the pitfalls and risks doing it this way? Especially since,
Apple constantly changes how updated versions retain stuff in their libraries.
You, on the other hand, keep separate data volumes, one for each OS boot volume I think, I presume in order to keep OS boot volumes lean and all able to fit on a SSD?
I could do it this way too and spend most of my time in SL b/c it seems faster than Mavericks on my system. (I installed Mavericks last night and set up iCloud for first time). I could just use Mavericks when necessary, and manually sync Apple Mail like you described, Chrome bookmarks, and other things.
PS I thought there were a lot of things Mavericks would open up for me, like Airplay and Find My Phone w/ iCloud, but the former still won't work on my system and the latter works in SL, now that iCloud is set up.

Dual boot with WinXp and Arch-Solved

Hi friends,
I was using windows boot loader to boot into arch instead of grub. I used this:
dd if=/dev/hda7 of=arch.lnx bs=512 count=1
to get the first 512 bytes of the partition in which I installed arch and then added a line directing towards arch.lnx (moved to windows partition) in boot.ini. But now after reinstalling arch, when i do the same to get first 512 bytes of the partition, it generates a blank file and hence using that I'm not able to boot into arch. Grub is installed in this partition only. Any hints about this issue.
EDIT: I dont know what was the problem exactly, but after I reinstalled grub by "grub-install /dev/hda7" and then did the above command, it worked fine.

moderator comment: This is a question on Kubuntu installation but it seems to me OP specifically wants to know how to set up his partitions without harming Arch. As long as the discussion remains about Arch Linux this thread can stay. I'm going to have to move this from Installation to Newbie Corner.
Annorax wrote:I assure you that I am doing my own research. I am new to Linux and new to dual booting and was just looking for some pointers and a place to start reading.
Please see this. I advise you to read the links 2ManyDogs gave. You also need to give us more information about your partitions, such as what is mounted where. I suspect you only have primary partitions and will need to convert one into an extended partition.

Is it possible to have a dual boot system with Windows that can ALSO be booted into a virtual machine optionally?

I have been looking for a solution to this for some time now. I want the convenience of a virtual Windows environment that can run simultaneously with OS X Lion--something I have right now using Virtualbox. But at the same time, there are graphics and processor-intensive Windows applications (for me, games and engineering applications) that don't run well at all in a virtual machine. So, here is what I am looking for:
A dual boot (i.e. bootcamp) system running Windows 7 and OS X Lion in which the Windows 7 machine can EITHER be booted as a virtual machine while running OS X OR booted physically so as to utitlize all system resources. The real trick however, is that I I want the virtual machine and the physical machine to be the exact same system. Meaning, if I boot physically into Windows and change something... rename a file, run a program and create a file, etc... those changes will all appear in the virtual machine.
Now, what are my options? I have read about Virtualbox and VMWare Fusion's "Raw Disk access" function but I can't tell if that's what I'm looking for or not... I half-thought that they were talking about converting a physical OS into a virtual machine, but without the intention of booting the physical OS again...
Also, I'm open to any software, free or otherwise. Thanks!

both VMWare Fusion & Parallels Desktop for Mac can use a bootcamp Windows installation as VM exactly like you want.

[Solved] Arch + W8 dual boot, UEFI, partitioning question

Hello,
I'm buying new laptop with preinstalled W8 (Lenovo E430) and I'm planning to dual boot. I've read Beginner's guide, Installation guide, searched forum, etc., but I'm still unsure how to deal with creating partitions for Arch while keeping Windows.
From the Beginners' Guide:
If you are intending to follow the advice to create a GPT partition table then you need to choose "Advanced" and then select "gpt" from the drop-down menu. This cannot be done if you have a pre-existing Windows installation on the drive which you wish not to destroy.
and from the Partitioning:
To dual-boot with Windows, one must use MBR.
A special exception to this rule: dual-booting Windows 64-bit using UEFI instead of BIOS, one must use GPT.
My W8 will be 64bit and also is Arch.
So, my question is. When I shrink W8 partition and create free space for Arch, do I have to choose 'gpt' option (2nd quote) or not (1st quote) for formatting? Or am I reading it totally wrong?
I would give it a try, but that destroying thing kind of scares me.
Last edited by centos (2013-06-18 19:24:58)

The wiki quotes you've presented make it look like the wiki was created with an MBR/BIOS assumption and then poorly edited to incorporate GPT/EFI information. The rules, presented in a more cohesive way, are these:
Windows ties its partition table type to the computer's firmware: under BIOS, Windows requires MBR; and under EFI, Windows requires GPT.
Linux is more flexible: It can use either MBR or GPT under BIOS. In theory, Linux can use either MBR or GPT under EFI, although many EFIs seem to require GPT, so it's best to stick with GPT on EFI-based computers.
When dual-booting, Windows is the limiting factor when it comes to partition table type.
Most EFIs include a Compatibility Support Module (CSM), which enables them to boot BIOS-based OSes. The CSM can usually be enabled or disabled in the firmware setup utility, although the details of how to do this vary from one implementation to another.
Computers that ship with Windows 8 pre-installed almost always use EFI, and therefore GPT.
Converting from MBR to GPT or vice-versa is possible with GPT fdisk (gdisk, cgdisk, or sgdisk), but this requires re-installing the boot loader for any already-installed OS(es). If Windows is one of those OS(es), it's probably not worth the effort.
GParted and parted can convert from MBR to GPT or vice-versa only by destroying existing partition entries, so you should use these tools to make such a change only on a blank disk or if you intend to lose all the existing partitions.
Since you (centos) say you're installing to a computer with a pre-installed Windows 8, you've almost certainly already got an EFI/GPT setup. Under these circumstances, you won't be choosing a partition table type unless you want to completely wipe that installation and install both OSes fresh. GParted will detect the partition table type and work with it automatically; you should not select the option to create a new partition table, which your first quote (partially) describes. You should, however, be sure that you install Arch in EFI mode and that you install an EFI-mode boot manager and/or boot loader, rather than a BIOS-mode version of GRUB. Getting an EFI-mode Windows and a BIOS-mode Linux to coexist is possible, but awkward. Converting a BIOS-mode Linux installation to boot in EFI mode is also possible, if you mistakenly install in BIOS mode; but it's usually easier to install in EFI mode to begin with. There are lots of threads here on EFI-mode Arch installations, as well as information in the Arch wiki on this topic. Unfortunately, EFI is still new enough that there are still a lot of kinks to be worked out, both in specific firmware implementations (many of them are buggy) and in OS support (which is still not as mature as is BIOS support).

[SOLVED] dual boot partitions

I have four partitions for my arch install. Does this mean that I won't be able to dual boot another distribution without having to reinstall arch? There can only be 4 partitions right? Or is there some way around it?
Thanks
Last edited by acidic (2012-04-20 11:06:23)

There can be only 4 primary partitions on a disk. However, one of the partitions can be made 'extended'. In that you can have any number of logical partitions. So there is no problem for multibooting. I believe Windows and BSD need a primary partition for installation. Obviously one of the primary partitions has to go. You can install full Arch system on one partition. I am not sure if this can be done without need for reinstalling arch. Following link of full system backup may be of help:
https://wiki.archlinux.org/index.php/Fu … with_rsync
Also see:
https://wiki.archlinux.org/index.php/Ad … Partitions
Output of 'sudo fdisk -l' will show you if all your partitions are primary or there is an extended one also. You may post the output here.
If there is a swap partition, that can be deleted, converted to extended, logical partitions made in extended, one of them made swap, and other distributions can be added. This should not cause any loss of data but this will require partitions to be resized.
Last edited by rnarch (2012-04-19 11:40:59)

Dual Booting (I'm sorry if this is a stupid question)

Hey, I'm regularly a Windows XP Professional user and I'm trying to convert to the dark side and use linux, and of course I wanted the best so I chose Arch. The only problem I've encountered so far is configuring Grub to dual boot. Excuse me if this is a n00b question or if it's been asked before (I really have tried my best to find this question in other topics but they never quite exactly matched my issue). I'm using two hard drives, a master with Arch on it and a slave with Windows XP on it. My Arch drive has three partitions, the first is a 50 mb boot partition, the second a 512mb swap partition, and the rest of the 40gb drive is a reiserFS partition. My Windows XP drive has a 79.5 gb NTFS partition, and the remaining .5gb is free space. I installed Grub to the first disk(Arch disk). Here is my configuration for Windows XP in Grub:
# (1) Windows XP Pro
title Windows XP Professional
rootnoverify (hd1,0)
map (hd0) (hd1)
map (hd1) (hd0)
makeactive
chainloader +1
When I get into Grub, I can select Arch and it boots properly, however when I choose Windows I get a "Disk Read Error". However, taking the Arch drive out and making the Windows one the master, Windows boots properly. Can you help me with this and any mistakes I may have made? Thank you very much.

I suggest invert the disks and forget the map thing.
Note: To get this method working, you need your XP CD for the last steps. Also some kind of Recovery linux CD will be good in case something goes wrong. The worst case can be that after the steps XP boots fine, but Linux do not.
1.Put XP HD as primary or first HD, and your Arch Disk secondary. Windows do not like it the other way around (period).
2.Temporalily install grub on the primary Hard Disk boot sector but don't worry, for the XP menu, we'll get it back later.
3.Edit your grub setting to point to the correct drives. Note: replace vmlinuz for your kernel image on /boot, and check the hd paths. I take the lines from my own grub config and adapt it to your hard disk layout.
title Arch Linux
root (hd0,0)
kernel (hd0,0)/boot/vmlinuz ro root=/dev/hda3
title Windows XP xxxx Edition
rootnoverify (hd1,0)
makeactive
chainloader +1
4. Check your system boots to both OS's, again don't worry for the missing XP boot menu.
5. Boot to Linux, and follow the steps on this page http://www.geocities.com/epark/linux/gr … HOWTO.html. Look for the dd if= instruction.
6. If you followed the instructions from the site, you'll have both OS's entries on XP menu. Now, put your XP CD-ROM and restart.
7. Select boot from CD, then Repair Installation
8. When ask which installation to repair, select 1, and enter the password. BTW, if you install XP and never log as Administrator, probably the password is unset (empty), so try first a return.
9. At the prompt, type FIXBOOT (enter) and at the prompt again, type FIXMBR (enter)
10. Restart
If everything is set, you'll have both Systems defined on Both menus, Grub and NTLDR. So you can switch from one to another at any time, for example, if selected the wrong option.

Convert dual boot to RT

Similar Messages

Maybe you are looking for