Convert previously converted raw files with Adobe DNG converter?

It seems that i am not able to convert my raw files that have already been previously converted to dng with the dng converter. I am wanting to start editing all over again with the raw image but before i can start editing a raw image, i have to convert it to a .dng. Why won't the converter program let me convert the raw file again and just give me the option of naming it differently than the first file? What am i doing wrong?!
Alternatively, is there any way that i can tell ACR (either in bridge or photoshop) to get rid of all edits made on the first .dng converted file and start over again with in-camera image?
Thanks for any help!

I don't know why your DNG converter has stopped working. Have you updated to a later version? But you don't need to go through that process again. In Bridge, just right click on the images and there is an option to clear the Camera Raw settings. Or, from inside Camera Raw, press the Alt key and one of the buttons will change to "Reset". In either case all camera raw settings are cleared, giving you the image as it was downloaded.

Similar Messages

I can't open nikon D750 NEF files with adobe dng converter 8.7

I have downloaded adobe dng converter 8.7 to open NEF files from my new nikon D750 but it not works. The program do not recognice the files. Do you know how solve this problem?

You have to launch and run the Adobe DNG Converter on each batch of raw files you want to convert to raw DNGs.
You have to point it to the folder containing your raw files. It does NOT work on individual raw files; it simply won't see them. It works only on folders.

Has anyone found a way to convert the Canon T4i raw files using Adobe DNG?

I just purchased the Canon T4i and us PE9. PE9 doesn't support the new raw format. I tried using Adobe DNG converter as Adobe recommended. That didn't worl either. Has anyone managed to convert these raw files so that PE9 will recognize them?

Steve,
Have you tried it or was that just from reading the description?
I noticed that the T4i seems to be omitted from the list shown on the download page and on the readme file. The full list of camera raw files supported does list the T4i as being supported by 7.1
See http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
I got hold of a sample raw file, which I processed by the DNG converter as was then able to open it in PSE 9. The file properties said that it was from a T4i. It could be that I got hold of an incorrect sample.
Brian

Colours wrong when RAW file with Adobe RGB profile printed from iPhoto '08

I've taken some photos on my Nikon D300 with the colourspace set to Adobe RGB. These import and display fine in iPhoto '08 but when printed it looks like the printer (Epson R2400 with the Epson 6.12 driver) is using the sRGB colourspace. The only option I can find relating to colour, is the Color matching dialogue which gives the option of Colorsync or Epson Color Controls. I've tried both with the same results. Preview shows the profile of the .nef file to be Adobe RGB (1998).
Has anyone any ideas of what I need to change?

AndyMn:
Welcome to the Apple Discussions. Most inkjet printers are geared for the sRGB profile. The Adobe profile is used by professional printers. Apple's services also recommend the sRGB profile. You need to reassign the sRGB or sRGBIEC1966-2.1 profile. I'm not sure about the raw file but you can use the ColorSync Utility to assign that profile to the file.
I have an Applescript that will apply the profile to files or folder of files dropped on it. I'm not sure if it will work on RAW files but it does on jpgs and tiffs. You can download it from Toad's Cellar. It takes about 6 seconds per file but does not apply any additional jpeg compression to jpg files.
Assigning the profile is considered better than the Applescript way but can only be done one at a time. You can test each method and see what gives you the best results.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and conver

After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and convert raw files. MacBook Pro with Snow Leopard. No such problem before this reinstallation.

You should install Camera Raw 4.6.
Visit this page and follow the instructions carefully:
PC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4039
-Noel

I have a Canon 6d and would like to convert my raw ( CR2) photo's into dng files. Adobe DNG converter 8.4 doesn't recognise the CR2 files. How can i solve this?

i have a Canon 6d and would like to convert my raw ( CR2) photo's into dng files. Adobe DNG converter 8.4 doesn't recognise the CR2 files. How can i solve this?

It is possible that you are not following instructions correctly in the DNG converter. The DNG converter interface asks for the FOLDER that contains your raw images. Choose the folder, but don't open it. After you have chosen the folder, click on the Convert button. The DNG conversion process should start. Does that help you?

I have downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the Sony a6000 camera. However it is not opening the images in camera raw. What can I do?

I have downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the Sony a6000 camera. However it is not opening the images in camera raw. What can I do?

Close and restart Photoshop if you have not already done so.
In Photoshop, go to the Help - About Plug-in... menu then choose Camera Raw. What version does it say there?
-Noel

How to open a jpg file with Adobe Camera Raw

I know it is possible to open a jpg file with Adobe Camera Raw using Bridge but is it possible to do this using PSE7? Thanks.

Yes. In the editor, File>Open As, and choose camera raw as the format. John Ellis also has a script for doing this directly from the organizer, but I don't have the link right at the moment. Hopefully he'll be along with it sooner or later.

How to open Fujifilm X-E2 Raw files with CS5? [was:fujifilm Raw]

I'm using ps cs5 ,mac 10.9.2 , camera fujifilm x-e2 , the raw files doesn't open , i need your help , Please

Each camera model’s raw files must be supported individually and Adobe only updates their currently shipping products for new cameras.
The X-E2, being a new camera, was first supported in ACR 8.3 which is only compatible with CS6 and CC, not CS5.
Upgrading your PS to CS6 or CC or buying Lightroom are probably the best choices to allow native support for your X-E2 raw files.
You can also use the free Adobe DNG Converter 8.3 to create DNGs from your X-E2 raw files, and those DNGs will open in older ACR plug-ins such as ACR 6.x that comes with PS-CS5 but be aware you’ll need to set your conversation options to old enough that your ACR plug-in is newer. The default conversion level is ACR 7.1 which is too new.
The DNG Converter 8.3 is available from:
http://www.adobe.com/downloads/updates

I have CS2. I shot RAW files with my Nikon D90 and now cannot open them in PS. I heard there was a plug-in to download for this, but cannot find it. Help?

I have CS2. I shot RAW files with my Nikon D90 and now cannot open them in PS. I heard there was a plug-in to download for this, but cannot find it. Help?

You would need at least CS3 with ACR 4.6 to natively edit NEFs from a D90 in PS:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
It might also work to use the DNG Converter 4.6 or newer to convert the NEF files to DNGs and then those might open in your older CS2 ACR, but I’m not sure, since it’s a 9 year old program I haven’t used in years.
The DNG Converter can be found, here:
http://www.adobe.com/downloads/updates.html

Importing RAW files with keywords from Bridge

Hi everyone,
I downloaded the trial version of Aperture and have now imported RAW files (Canon 20D) with keywords and IPTC data applied via Bridge.
The import of the RAW files was no problem however the files lacked the keywords and IPTC data, which I applied in Bridge.
I also tried to import JEPG files and here Aperture could show me keywords and IPTC data.
Why does this not work for RAW files? What do I have to do in order to get it to work?
Thanks in advance for your advise
/David

When you add metadata (keywords etc.) to most proprietary raw formats (including Canon .CR2 files), Bridge doesn’t know how to embed that data in to the file—Canon and other manufacturers haven’t told Adobe (or anyone else) what the structure of these raw files is and how metadata can be stored within the file itself. Therefore, Bridge creates a ‘sidecar’ file to go with the raw file: the sidecar file sits alongside the raw file, with the same filename and a .xmp extension. This sidecar file contains any metadata you may have applied, as well as adjustments you have made in Adobe Camera Raw.
Unfortunately, Aperture doesn’t read these sidecar files when importing raw files, so you lose any adjustments from ACR (not surprising, since Aperture is obviously a different raw converter to ACR so the adjustments would be different anwyay), but also you lose any metadata you may carefully have applied.
There may be an answer, however. But it’ll cost. That would be to use iView Media Pro (which has recently been bought by Microsoft, but a Mac version still exists). There is a 21-day free trial for iVMP—since my suggestion is to use it as a temporary conduit for importing all your existing raw files into Aperture, you won’t necessarily have to pay the £129 GBP asking price for iVMP (others can debate the morality of that statement, however; fortunately I already owned iVMP and so didn’t have to worry about such things). I believe iVMP can read the XMP sidecar files created by Bridge. Create a new iVMP catalogue with all your raw files which you want to move into Aperture. It should bring all your existing metadata into the iVMP catalogue as well.
Then, import all the raw files into Aperture. As you have found, they’ll be without any metadata. As long as the filenames are the same in both the iVMP catalogue and the Aperture library, you can use Adam Tow’s application Annoture to transfer metadata from the iVMP catalogue into the Aperture library.
Sort of circuitous, but possible. If only Aperture read the metadata from those sidecar files, eh? If I’m wrong in thinking that iVMP imports the XMP metadata, then what you can do is get Bridge to convert all your .CR2 raw files into .DNG files. If you don’t know about DNG, read about it at Adobe. But briefly, Bridge is able to embed its metadata into the DNG files and iVMP is able to read that embedded metadata when importing DNG files into the catalogue. I know that for certain: I used iVMP and DNG files (from my own 20D) before using Aperture; when I started using Aperture (which I love, now) I used Annoture to transfer all my metadata from iVMP into Aperture.
Perhaps someone else will explain this better than I.

Opening Canon 6D .CR2 raw files with CS5 Extended

Can't open Canon EOS 6D raw files with CS5. What is the minimum I need to do to open Canon EOS 6D .CR2 raw files in Photoshop CS5 Extended version 12.1 x64, and Brige CS5 version 4.1.0.54, and Camera Raw version 6.7.0.339? I would rather not have to go through the hassle of first converting all files with the Adobe DNG - is there another option? Can I upgrade my Adobe software?

Im having the same problem, and i use CS6
Do you know if CC can open 6D .CR2 files?
Thanks!

Single Raw file conversion to .dng

Sorry if this has been asked but I can't find any tutorial on .cr2 file to .dng file conversion. I usually shoot RAW+jpeg on my Canon 50d. I am using CS3 and understand the need to convert my Canon Raw to the Adobe Dng format for PS processing. I downloaded and installed the free dng converter. I just can't seem to find a way to convert a SINGLE raw file into a SINGLE .dng file, it only wants a whole folder full for conversion. And am I correct in that Adobe isn't writing a plugin to let CS3 do the conversion? Thanks and Happy Thanksgiving!

You could copy the single CR2 file into a folder all by itself, then run the DNG converter on it. And I'm not completely sure, but I think I've heard of the ability for the tool to convert a lone file by providing the file path on a command line. Thus you could drag a single file to the DNG Converter icon if you had it on the desktop.
And you're correct - you're not going to get new camera support in the Camera Raw 4.x series that works with Photoshop CS3. Adobe stops adding new camera support when a new major version of Photoshop is released. But they do provide the (less convenient) DNG Converter for free.
-Noel

I cannot read Nikon D600 raw files with CS5

I cannot read Nikon D600 raw files with CS5, I have tried Camera Raw 6.1 update but that has not worked.

Nikon D 600 will work with ACR 7.3 which needs minimum of PS CS 6 : http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
With PS CS 5, ACR 7.3 will not work.
So either you need to upgrade to CS 6 or use DNG converter to convert images to DNG format which you can open in CS 5

Issues opening RAW files with CS2...

I find if a bit complicated to open RAW files with Photoshop CS2 in iPhoto 08 (I'm using OS X 10.5). Currently the only way I've been able to do this is do a search for the file name in the finder, at the bottom of the Finder window, in the path, double click on the folder that the RAW files are in (user/my name/pictures/iphoto library/originals/2007/RAW files), then highlight the NEF files (the cameras a Nikon D200) I want to open, hit command/O then Photoshop CS2 opens the files in the RAW converter. If I try this from CS2 (command/O) the path goes as for as iphoto library (user/my name/pictures/iphoto library), at this point the iphoto library icon is ghosted out and can not be opened. If I drag and drop the image from iPhoto to the CS2 icon in the dock it opens as a jpg not the RAW file I need. If I try clicking my way to the folder from the left side of the finder, my name/pictures/iphoto library this is as far as I can go. There's something strange going on here. How can you go to a folder only one way and not the others? There seems to "hidden" folders now.
So... My question (finally), how can I simply open RAW files from iPhoto 08 in CS2?

In iPhoto's Advanced preferences select the checkbox under RAW Photos: "Use RAW when using external editor". That will open the Cr2 file in the raw editor. To get the edit to show in iPhoto you'll need to click on the Open Image button so the jpg version is created with the edits you made to the RAW file. Then when you save you'll need to navigate in the Save window to the Modified folder and save it into the folder representing the event that the original is in. It's not easy. I've not done much with RAW, just a few tests, so there may be an easier way to get iPhoto to recognize the edited version.
If you don't use the Open File and close iPhoto won't display the edits you made to the RAW file.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Convert previously converted raw files with Adobe DNG converter?

Similar Messages

Maybe you are looking for