Convert SQL server int to SSIS int - Bug and conversion issue ?

I am trying to convert an SQL server int to SSIS int. When I set it to int 32, i get an error - 
[Execute SQL Task] Error: An error occurred while assigning a value to variable "intMy": 
"The type of the value being assigned to variable "User::intMy" differs from the current variable type. 
Variables may not change type during execution. Variable types are strict, except for variables of type Object.
when i change it to int16, i get the same error. also, ssis silently changes the int16 to int32. Could this be a bug ? How do you convert an sql server int to an ssis int ?

Hi blastoSO,
Is the data type of the target column in the SQL Server table Int or BigInt? I have tested the issue in both SSIS 2008 R2 and SSIS 2012. In SSRS 2008 R2, the Int/BigInt type column value cannot be mapped to an Int16 or Int32 type SSIS variable with the error
you have encountered, however, in SSIS 2012, everything goes well. 
In SSIS 2008 R2, we can work around this issue by map the result set to a String type SSIS variable (vStr), and then create a new Int16 or Int32 type variable (vInt) which is evaluated as expression and retrieves value from the previous string variable.
For the expression of the variable vInt, we can set its expression to (DT_UI4)@[User::vStr]. Besides, keep in mind that you need to assign an integer value for the string type variable at design time to make the expression for the variable vInt pass the validation.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/8e1170c3-537e-4cd7-bf3f-50c9a2539038/execute-sql-task-warning?forum=sqlintegrationservices 
Regards,
Mike Yin
TechNet Community Support

Similar Messages

  • SQL Server Express 2005 to 2014 upgrade and Uninstallation issues

    We have client application running SQL Server Express that connects to a SQL Server 2012 server.  We are attempting to upgrade from Microsoft SQL 2005 express to Microsoft SQL Server 2014
    express – but are having difficulties – especially with uninstall.
    Our understanding is that we needed to follow the following steps:
        First we install Microsoft SQL 2005 express SP4 as required silently
    Start /wait SQLEXPR.exe /qn ACTION=UPGRADE INSTANCENAME="SQLEXPRESS" UPGRADE=SQL_Engine SAPWD=<password>
    SQLACCOUNT="NT AUTHORITY\SYSTEM" SQLPASSWORD= SECURITYMODE="SQL"
        Then try upgrading with Microsoft SQL Server 2014 express, we use following command to do it silently
    SQLEXPR.exe /q /ACTION=upgrade /INSTANCENAME=SQLEXPRESS /ISSVCAccount="NT AUTHORITY\SYSTEM" /IACCEPTSQLSERVERLICENSETERMS
    We see following
        In Control Panel -> Uninstall or change program, we have all the instances listed 2005, 2008, 2012 and 2014.
        How do we uninstall the instance?  , We try uninstalling 2014
    But it is not cleanly uninstalled.
    Questions:
        Is there any way for clean upgrade from Microsoft SQL 2005 express SP3 to Microsoft SQL 2014 express?
        Is there any specific steps suggested to uninstall upgraded SQL 2014 express from system?
        Are we doing anything wrong in commands for silent upgrade?
    Thanks in advance.

    Hello,
    After you perform an in-place upgrade it’s normal to find the binaries and references of the old version of SQL Server on the Start Menu and Control Panel -> Programs and Features. That’s by design. After you have successfully upgraded an instance, you can
    remove the old binaries.
    IfIf you find some remnants after uninstalling SQL Server 2014, please perform the following steps to manually uninstall it:
    1. Uninstall all SQL Server 2014 components you can using Control Panel -> Programs and
    Features
    2. Backup the registry.
    3. Delete the following keys in regedit:
        --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
        --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
    4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete
    all the sub-keys referencing SQL Server.
    5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing
    SQL Server.
    6. Rename all the SQL Server folders in the computer like
    C:\Program Files\Microsoft SQL Server and subfolders.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • How to select data from 3rd row of Excel to insert into Sql server table using ssis

    Hi,
    Iam having Excel files with headers in first two rows , i want two skip that two rows and select data from 3rd row to insert into Sql Server table using ssis.3rd row is having column names.

                                                         CUSTOMER DETAILS
                         REGION
    COL1        COL2        COL3       COL4           COL5          COL6          COL7
           COL8          COL9          COL10            COL11      
    1            XXX            yyyy         zzzz
    2            XXX            yyyy        zzzzz
    3           XXX            yyyy          zzzzz
    4          XXX             yyyy          zzzzz
    First two rows having cells merged and with headings in excel , i want two skip the first two rows and select the data from 3rd row and insert into sql server using ssis
    Set range within Excel command as per below
    See
    http://www.joellipman.com/articles/microsoft/sql-server/ssis/646-ssis-skip-rows-in-excel-source-file.html
    Please Mark This As Answer if it solved your issue
    Please Mark This As Helpful if it helps to solve your issue
    Visakh
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Converting SQL server database into SAP readable XML??

    Could anyone kindly let me know what is the procedure to convert SQL server database into SAP readable (encrypted) XML for SAP Authoring tool???

    Sorry you will need to be more specific, what is it exactly you want to do? What authoring tool do you mean.
    A bit more info and someone might be able to help you.
    BRgds,
    Simon

  • Convert SQL server database into SAP readable (encrypted) XML for SAP tool?

    Could anyone kindly let me know what is the procedure to convert SQL server database into SAP readable (encrypted) XML for SAP Authoring tool???

    So If I understood it correctly there an existing propriertory question bank with SQL server. You are looking at an option to migrate all the tests and questions from the existing system to the LSO system. Right ?
    I am still not clear on the xml conversion. Have you guys found a solution which could be achieved through a xml file ?
    am not aware of a way through which you could import only a xml file and create tests/questions. If you have a sample xml file then forward me so that I could do some testing on my end.As per my knowledge you could do one of the following. I
    1. Create the tests and questions manually in Authoring Environment. It will be a time consuming task. Based on the number of questions you have you might have to assemble a team of content developers to acheive this.
    2. Alternatively, you could create a Adobe Flash based assessment. The Flash component would be the front-end and will read from a xml file to display the questions and to drive the funcationality. This would be a easier and less time consuming than creating the assessments manually in authoring environment. However, you might miss out some of the functionality available in the Test Author of Authoring Environment unless you have all the functionality replicated inside Flash. This would require one time effort in creating the Flash template and the xml file structure. Once that is created you could create multiple assessments by just replacing the xml file. If you select this approach then you would have to ensure the data from SQL is converted in the desired xml format required by your Flash component.
    Please let me know if you require any further guidance or clarification regarding this.
    Regards,
    Ravi Sekhar

  • Error converting SQL Server DDL and views to Oracle

    I am trying to convert SQL Serve 2008 on windows to Oracle 11g using SQL Developer 3.2.20.09. I am using the jtds-1.2.7 drivers to connect to SQL Server.
    I have made several attempts to run the conversion and am getting the tables, indexes, and triggers converted with no issue. However, my Procedures and views are not coming across. All of them are giving similar errors as:
    "Failed To Convert Stored Procedure get_compvision > esp3.dbo.get_compvision:unexpected end of subtree: Line 0 Column 0"
    When I log into the source SQL Server environment using SQL Developer, I get an empty SQL Editor window with "null" when I try to {right-click -> "Open"} on the Procedure.
    Logging into SQL Server Administrator as the same user I can see the source code, so the issue appears to be related to SQL Developer and not my user privleges. I am a dbo alias in SQL Server.
    In addition, if I click on a view, I can see the data and metadata, but not the SQL that defines the view. I see tabs for column, data, triggers, and details.
    In addition, if I go to the "capture" for my Migration project and drill down to procedures, I can see them listed, but each and every procedure gives me a "/* DDL not accesible */" error. I get teh same results for views, triggers and indexes.
    Can someone help me? I have been googling for days!
    Edited by: user4714217 on Jan 24, 2013 12:54 PM

    SELECT v.vnd_c, CASE v.use_parent_addr_flg WHEN 0 THEN a.str_1 ELSE pa.str_1 END AS str_1,
    CASE v.use_parent_addr_flg WHEN 0 THEN a.str_2 ELSE pa.str_2 END AS str_2,
    CASE v.use_parent_addr_flg WHEN 0 THEN a.str_3 ELSE pa.str_3 END AS str_3,
    CASE v.use_parent_addr_flg WHEN 0 THEN a.city ELSE pa.city END AS city,
    CASE v.use_parent_addr_flg WHEN 0 THEN a.state ELSE pa.state END AS state,
    CASE v.use_parent_addr_flg WHEN 0 THEN a.zipcode ELSE pa.zipcode END AS zipcode,
    CAST((CASE v.use_parent_addr_flg WHEN 0 THEN (CASE a.foreign_flg WHEN 1 THEN 'Y' ELSE 'N' END)
    ELSE (CASE pa.foreign_flg WHEN 1 THEN 'Y' ELSE 'N' END) END) AS char(1)) AS foreign_flg,
    CASE v.use_parent_addr_flg WHEN 0 THEN a.country ELSE pa.country END AS country,
    CASE v.use_parent_addr_flg WHEN 0 THEN a.cre_d ELSE pa.cre_d END AS cre_d,
    CASE v.use_parent_addr_flg WHEN 0 THEN a.mod_d ELSE pa.mod_d END AS mod_d,
    CASE v.use_parent_addr_flg WHEN 0 THEN a.mod_by ELSE pa.mod_by END AS mod_by
    FROM dbo.om_vendor AS v LEFT OUTER JOIN
    dbo.om_address AS a ON a.vnd_id = v.vnd_id AND a.addr_c = 1 INNER JOIN
    dbo.om_owner AS o ON v.owr_id = o.owr_id INNER JOIN
    dbo.om_address AS pa INNER JOIN
    dbo.primary_vendors AS pv ON pa.vnd_id = pv.vnd_id ON o.part_id = pv.part_id
    WHERE (pa.addr_c = 1)
    WHICH TRANSLATES TO
    SELECT v.vnd_c ,
    CASE v.use_parent_addr_flg
    WHEN 0 THEN a.str_1
    ELSE pa.str_1
    END str_1 ,
    CASE v.use_parent_addr_flg
    WHEN 0 THEN a.str_2
    ELSE pa.str_2
    END str_2 ,
    CASE v.use_parent_addr_flg
    WHEN 0 THEN a.str_3
    ELSE pa.str_3
    END str_3 ,
    CASE v.use_parent_addr_flg
    WHEN 0 THEN a.city
    ELSE pa.city
    END city ,
    CASE v.use_parent_addr_flg
    WHEN 0 THEN a.STATE
    ELSE pa.STATE
    END STATE ,
    CASE v.use_parent_addr_flg
    WHEN 0 THEN a.zipcode
    ELSE pa.zipcode
    END zipcode ,
    (CASE v.use_parent_addr_flg
    WHEN 0 THEN (CASE a.foreign_flg
    WHEN 1 THEN 'Y'
    ELSE 'N'
    END)
    ELSE (CASE pa.foreign_flg
    WHEN 1 THEN 'Y'
    ELSE 'N'
    END)
    END) foreign_flg ,
    CASE v.use_parent_addr_flg
    WHEN 0 THEN a.country
    ELSE pa.country
    END country ,
    CASE v.use_parent_addr_flg
    WHEN 0 THEN a.cre_d
    ELSE pa.cre_d
    END cre_d ,
    CASE v.use_parent_addr_flg
    WHEN 0 THEN a.mod_d
    ELSE pa.mod_d
    END mod_d ,
    CASE v.use_parent_addr_flg
    WHEN 0 THEN a.mod_by
    ELSE pa.mod_by
    END mod_by
    FROM om_vendor v
    LEFT JOIN om_address a
    ON a.vnd_id = v.vnd_id
    AND a.addr_c = 1
    JOIN om_owner o
    ON v.owr_id = o.owr_id
    JOIN om_address pa
    JOIN primary_vendors pv
    ON pa.vnd_id = pv.vnd_id
    ON o.part_id = pv.part_id
    WHERE ( pa.addr_c = 1 );
    Edited by: user4714217 on Jan 24, 2013 1:43 PM

  • How to convert sql server database to SQL Server Express LocalDB??

    How do I convert sql server database 2008 to SQL Server Express LocalDB??
    Thanks
    Aru

    Hello,
    Please read the following article:
    http://msdn.microsoft.com/en-us/library/hh873188.aspx
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • How to convert sql server procedure in to plsql procedure

    hi guys
    i have requirement where in i have to convert sql server procedure into plsql procedure.
    can some one help me out .
    thanks,
    Vamshi.D

    Hi Vamshi,
    As you want to convert sql server procedure in to plsql procedure
    i.e SQL SERVER ->ORACLE Right
    FYI
    SQL SERVER Proc. Syntax are totally different as compared to ORACLE Proc.
    So, better you study Logic of SQL-SERVER Proc and convert into
    Oracle Procedure.
    Thanks,
    Samadhan

  • How to convert SQL Server hierarchical query (CTE) to Oracle?

    How to convert SQL Server hierarchical query (CTE) to Oracle?
    WITH cte (col1, col2) AS
    SELECT col1, col2
    FROM dbo.[tb1]
    WHERE col1 = 12
    UNION ALL
    SELECT c.col1, c.col2
    FROM dbo.[tb1] AS c INNER JOIN cte AS p ON c.col2 = p.col1
    DELETE a
    FROM dbo.[tb1] AS a INNER JOIN cte AS b
    ON a.col1 = b.col1

    See: http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_10002.htm#i2129904
    Ah, just spotted it's a delete statement - you won't be able to do it using subquery factoring in Oracle.
    I had a go at trying to convert for you, but notice that you reference the cte from inside the cte... I can only assume you have a table called cte too...
    DELETE FROM dbo.tb1
    WHERE col1 = 12
    OR col2 IN (SELECT col1 FROM cte)
    Edited by: Boneist on 22-Jun-2009 09:19

  • Verify that SQL Server Reporting Services is installed properly and that it is running.

    I am trying to install DPM 2010 on Windows 2008 R2.  Running through installation and the server that I'm installing DPM to will also host the SQL instance and Reporting instance.  Pretty much choosing all the defaults.
    Installation gets to reporting portion and fails.  It says that I need to verify that Reporting Services is running.   The exact error is:
    Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components copied during installation. 
    For details, click the Error tab.
    DPM Setup has not configured Reporting Services to use Secure Sockets Layer. For more information on how to configure the Report Server for Secure Sockets Layer (SSL) connections, see Configuring Report Server for Secure Sockets Layer (http://go.microsoft.com/fwlink/?LinkId=178289)
    Report configuration failed.
    Verify that SQL Server Reporting Services is installed properly and that it is running.
    ID: 812
    It is running and working, I can go to the URL and see Reports installed.   It grabbed a server certificate which is valid and binds that to 443.  I have tried this as well with the certificate removed.
    Here is the relative portion of the DPM 2010 log:
    [6/25/2010 10:30:01 AM] * Exception :  => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException: Exception of
    type 'Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException' was thrown.
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException.UnableToConfigureAccount(ErrorCode errorCode)
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateUserAccount(String server, String password, Boolean create)
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.SetReportingPassword(String password, String server, String instanceName, String dbConnectionString)
    *** Mojito error was: PasswordTooShort; 0; None
       --- End of inner exception stack trace ---
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
       at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
    [6/25/2010 10:30:01 AM] * Exception :  => Report configuration failed.Verify that SQL Server Reporting Services is installed properly and that it is running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception --->
    Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException: exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException:
    Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException' was thrown.
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException.UnableToConfigureAccount(ErrorCode errorCode)
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateUserAccount(String server, String password, Boolean create)
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.SetReportingPassword(String password, String server, String instanceName, String dbConnectionString)
    *** Mojito error was: PasswordTooShort; 0; None
       --- End of inner exception stack trace ---
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
       at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
       --- End of inner exception stack trace ---
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.ConfigureReporting(String reportserverConfigFilePath, Boolean existingDB, Boolean isOemSetup, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
    *** Mojito error was: ReportDeploymentFailed; 0; None
       --- End of inner exception stack trace ---
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.ConfigureReporting(String reportserverConfigFilePath, Boolean existingDB, Boolean isOemSetup, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.ConfigureReporting(Boolean isRemoteDb)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
    *** Mojito error was: ReportDeploymentFailed; 0; None
    [6/25/2010 10:30:07 AM] *** Error : Report configuration failed.
    Verify that SQL Server Reporting Services is installed properly and that it is running.
    ID: 812
    [6/25/2010 10:30:07 AM] Information : Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components
    copied during installation.
    For details, click the Error tab.
    DPM Setup has not configured Reporting Services to use Secure Sockets Layer. For more information on how to configure the Report Server for Secure Sockets Layer (SSL) connections, see Configuring Report Server for Secure Sockets Layer (http://go.microsoft.com/fwlink/?LinkId=178289)

    Hello,
    The real problem is the error UnableToConfigureAccount and *** Mojito error was: PasswordTooShort; 0; None
    The reason is due to the new password complexity on Windows 2008 which states the following:
    Password must meet complexity requirements
    This security setting determines whether passwords must meet complexity requirements.
    If this policy is enabled, passwords must meet the following minimum requirements:
    Not contain the user's account name or parts of the user's full name that exceed two consecutive characters
    Be at least six characters in length Contain characters from three of the following four categories:
    English uppercase characters (A through Z)
    English lowercase characters (a through z)
    Base 10 digits (0 through 9)
    Non-alphabetic characters (for example, !, $, #, %)
    Complexity requirements are enforced when passwords are changed or created.
    Default:
    Enabled on domain controllers.
    Disabled on stand-alone servers.
    Note: By default, member computers follow the configuration of their domain controllers.
    Please use a more secure password adhering to the above criteria and DPM should install fine.
    Regards, Mike J [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights.

  • SQL Server Management 6.5.1.0 and 6.5.4.0 does not discovery SQL 2008 databases on Windows 2003

    SQL Server Management 6.5.1.0 and 6.5.4.0 does not discovery SQL 2008 databases on a custom instance name or when multiple SQL instances are installed on Windows 2003.
    OS Version: Windows 2203 x64 with SP2
    Database Version: 10.3.5869.0
    The instance in this case: I01 is running on port 49168.
    SQL Server Network Configuration | Protocols for I01 | IP Addresses | IPAll | TCP Port = 49168
    The DB Engine class is discovered but not the "Tcp Port" property.
    The database discovery script then fails as it is missing the 8th parameter; The Port.
    Looking at the discovery script DiscoverSQL2008DBEngineDiscovery.vbs i see the following WMI query.
    Set oWMI = GetObject("winmgmts:\\" & computerName & "\root\Microsoft\SqlServer\" & SQL_WMI_NAMESPACE)  
    Set oQuery = oWMI.ExecQuery("SELECT * FROM ServerNetworkProtocolProperty
    Using WMI Explorer if I connect to namespace: root\Microsoft\SqlServer\ComputerManagement10
    and query "SELECT * FROM ServerNetworkProtocolProperty". There are no instances.
    What am I missing or doing wrong?
    Closely related to this article. https://gallery.technet.microsoft.com/Hotfix-Management-Pack-SQL-17cf1118#content.
    Thanks
    Gavin

    Hi,
    I would like to know is there any update about the issue. If the issue is solved, will you please share the resolution here to help others in this forum who encounter similar issue.
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • What SQL Server Agent jobs are currently running and for how long

    Is there a way to tell what SQL Server Agent jobs are currently running and for how long?  View history isn't working in my case because it's only showing completed jobs.  John Schroeder

     You can use the "Job Activity Monitor" for doing this.  Do the following steps. It will open up the Job Activity Monitor.
    1.    In Object Explorer, connect to an instance of the SQL Server Database Engine, and then expand that instance.
    2.    Expand SQL Server Agent.
    3.    Right-click Job Activity Monitor and click View Job Activity.
    4.    In the Job Activity Monitor, you can view details about each job that is defined for this server.
    In Job Activity Monitor page, we have column called Status. It will indicate whether job is executing or idle. Last Run column will give you the last invocation time of this job.
    Use the following link for further reference.
    http://msdn.microsoft.com/en-us/library/ms187449.aspx
    Thanks,
    Sateesh.
    Mark Post as helpful if it provides any help.Otherwise,leave it as it is.

  • Sql server agent is not highlighting start and stop options

    I configured snapshot replication , after that sql server agent is not highlighting start and stop options in instance.
    But I can start & stop it in services.msc
    how I can solve this?

    Hi,
    Can you post exact error message.
    Also refer below article, may be similar issue like yours.
    How to start SQL Server Agent when Agent XPs show disabled
    Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
    Praveen Dsa | MCITP - Database Administrator 2008 |
    My Blog | My Page

  • Converting SQL Server Stored Procedure to Oracle

    Hi there,
    I tried to use SwisSQL to convert my SQL Server stored procedure to Orcale without much success.
    Is there anyone who could help me out with this?
    My SQL Server Stored Procedure is:
    CREATE PROCEDURE [dbo].[SP_BackgroundCheckRequest]
         --MASTER Table
         @MASTER_ID int,
         @PERSONNEL_ID int = NULL,
    @DATE_OF_BIRTH datetime = NULL,
         @GENDER varchar(1) = NULL,
         @COUNTRY_OF_BIRTH varchar(3) = NULL,
    @TOWN_OF_BIRTH varchar(100) = NULL,
         @STATE_OF_BIRTH varchar(50) = NULL,
         @CHECK_CATEGORY varchar(10) = NULL,
         @CHECK_TYPE varchar(10) = NULL,
         @PRIORITY varchar(10) = NULL,
         @PRIORITY_REASON varchar(100) = NULL,
         @SCREENING_LEVEL nchar(1) = NULL,
         @POSITION nchar(50) = NULL,
         @REQUEST_SOURCE varchar(60) = NULL,
         --NAME_TYPE Table
         @NAME_TYPE varchar(5) = NULL,
         @FAMILY_NAME varchar(50) = NULL,
         @FIRST_NAME varchar(50) = NULL,
         @MIDDLE_NAME varchar(50) = NULL,
         @TITLE varchar(10) = NULL,
         @PREFFERED_NAME varchar(40) = NULL,
         @PREVIOUS_NAME varchar(140) = NULL,
         --ADDRESS_TYPE Table
         @ADDRESS_TYPE varchar(10) = NULL,
         @ADDRESS_LINE_1 varchar(30) = NULL,
         @ADDRESS_LINE_2 varchar(30) = NULL,
         @ADDRESS_LINE_3 varchar(30) = NULL,
         @COUNTRY varchar(3) = NULL,
         @SUBURB varchar(50) = NULL,
         @STATE varchar(50) = NULL,
         @POSTCODE varchar(15) = NULL,
         @START_DATE varchar(10) = NULL,
         @END_DATE varchar(10) = NULL,
         --LICENSE_TYPE Table
         @LICENSE_TYPE varchar(5) = NULL,
         @LICENSE_AGENCY varchar(15) = NULL,
         @LICENSE_NUMBER varchar(100) = NULL,
         @LICENSE_SIGHTED varchar(1) = NULL,
         --PHONE_TYPE Table
         @TELEPHONE_TYPE varchar(5) = NULL,
         @TELEPHONE_NUMBER varchar(20) = NULL,
         @MOBILE_TYPE varchar(5) = NULL,
         @MOBILE_NUMBER varchar(20) = NULL,
         @EXTENSION_TYPE varchar(5) = NULL,
         @EXTENSION_NUMBER varchar(20) = NULL,
         --PASSPORT_TYPE Table
         @PASSPORT_TYPE varchar(5) = NULL,
         @PASSPORT_NUMBER varchar(50) = NULL,
         @PASSPORT_COUNTRY varchar(3) = NULL,
         @PASSPORT_SIGHTED varchar(1) = NULL
    AS
    BEGIN TRANSACTION
    INSERT into MASTER (MASTER_ID, PERSONNEL_ID, DATE_OF_BIRTH, GENDER, COUNTRY_OF_BIRTH,
         TOWN_OF_BIRTH, STATE_OF_BIRTH, CHECK_CATEGORY, CHECK_TYPE, PRIORITY, PRIORITY_REASON,
         SCREENING_LEVEL, POSITION, REQUEST_SOURCE)
         VALUES (@MASTER_ID, @PERSONNEL_ID, @DATE_OF_BIRTH, @GENDER, @COUNTRY_OF_BIRTH,
         @TOWN_OF_BIRTH, @STATE_OF_BIRTH, @CHECK_CATEGORY, @CHECK_TYPE, @PRIORITY, @PRIORITY_REASON,
         @SCREENING_LEVEL, @POSITION, @REQUEST_SOURCE)
    IF @@ERROR <> 0
    BEGIN
         ROLLBACK
         RAISERROR ('Error inserting values into MASTER table!', 16, 1)
         RETURN
    END
    INSERT into NAME_TYPE (MASTER_ID,NAME_TYPE,FAMILY_NAME,FIRST_NAME,MIDDLE_NAME,TITLE)
         VALUES (@MASTER_ID,@NAME_TYPE,@FAMILY_NAME,@FIRST_NAME,@MIDDLE_NAME,@TITLE)
    IF @@ERROR <> 0
    BEGIN
         ROLLBACK
         RAISERROR ('Error inserting values into NAME_TYPE table!', 16, 1)
         RETURN
    END
    INSERT into ADDRESS_TYPE (MASTER_ID,TYPE,ADDRESS_LINE_1,ADDRESS_LINE_2,ADDRESS_LINE_3,
              COUNTRY,SUBURB,STATE,POSTCODE,START_DATE,END_DATE)
         VALUES (@MASTER_ID,@ADDRESS_TYPE,@ADDRESS_LINE_1,@ADDRESS_LINE_2,@ADDRESS_LINE_3,
              @COUNTRY,@SUBURB,@STATE,@POSTCODE,@START_DATE,@END_DATE)
    IF @@ERROR <> 0
    BEGIN
         ROLLBACK
         RAISERROR ('Error inserting values into ADDRESS_TYPE table!', 16, 1)
         RETURN
    END
    INSERT into LICENSE_TYPE (MASTER_ID,TYPE,AGENCY,NUMBER,SIGHTED_YN)
         VALUES (@MASTER_ID,@LICENSE_TYPE,@LICENSE_AGENCY,@LICENSE_NUMBER,@LICENSE_SIGHTED)
    IF @@ERROR <> 0
    BEGIN
         ROLLBACK
         RAISERROR ('Error inserting values into LICENSE_TYPE table!', 16, 1)
         RETURN
    END
    INSERT into PHONE_TYPE (MASTER_ID,TYPE,NUMBER)
         VALUES (@MASTER_ID,@TELEPHONE_TYPE,@TELEPHONE_NUMBER)
    IF @@ERROR <> 0
    BEGIN
         ROLLBACK
         RAISERROR ('Error inserting Telephone number into PHONE_TYPE table!', 16, 1)
         RETURN
    END
    IF ((@MOBILE_TYPE <> NULL) AND (@MOBILE_NUMBER <> NULL))
    BEGIN
         INSERT into PHONE_TYPE (MASTER_ID,TYPE,NUMBER)
              VALUES (@MASTER_ID,@MOBILE_TYPE,@MOBILE_NUMBER)
         IF @@ERROR <> 0
         BEGIN
              ROLLBACK
              RAISERROR ('Error inserting Mobile number into PHONE_TYPE table!', 16, 1)
              RETURN
         END
    END
    IF ((@EXTENSION_TYPE <> NULL) AND (@EXTENSION_NUMBER <> NULL))
    BEGIN
         INSERT into PHONE_TYPE (MASTER_ID,TYPE,NUMBER)
              VALUES (@MASTER_ID,@EXTENSION_TYPE,@EXTENSION_NUMBER)
         IF @@ERROR <> 0
         BEGIN
              ROLLBACK
              RAISERROR ('Error inserting Extension number into PHONE_TYPE table!', 16, 1)
              RETURN
         END
    END
    INSERT into PASSPORT_TYPE (MASTER_ID,NUMBER,COUNTRY,SIGHTED_YN)
         VALUES (@MASTER_ID,@PASSPORT_NUMBER,@PASSPORT_COUNTRY,@PASSPORT_SIGHTED)
    IF @@ERROR <> 0
    BEGIN
         ROLLBACK
         RAISERROR ('Error inserting values into PASSPORT_TYPE table!', 16, 1)
         RETURN
    END
    COMMIT

    First, a basic concept. That also illustrates how different Oracle is (and PL/SQL) from SQL-Server (and T-SQL).
    PL/SQL integrates two different languages. The PL language. The SQL language. It allows you to code SQL source code natively inside the PL language. The PL compiler is clever enough to do the rest - make calls to the SQL engine to create SQL cursors, bind PL variable values to bind variables in the SQL code. Etc.
    PL is a "proper" programming language. It is much like Pascal (it is based on Ada, a close family member of Pascal). It is nothing at all like T-SQL.
    Okay, now for the very basic rule for Oracle development.
    Maximize SQL. This means using the SQL language to crunch data. It is the "closest" to the data. It is designed and optimised for dealing with data. Do your data processing using SQL.
    Minimize PL/SQL. This means using the PL language not to crunch data, but to provide the conditional logic. Implement business rules. And then have the SQL language crunch the data as the data processing language.
    Attempting to directly translate T-SQL code into PL/SQL is flawed. It is like trying to make coffee with teabags. Yeah, the tea may have caffeine it, but it is not coffee.
    To do what that T-SQL script does, insert a row into a table, a typical PL/SQL equivalent will look as follows:
    create or replace procedure InsertMaster( masterRow master%rowtype ) authid definer is
    .. types and variables declared here
    begin
      -- masterRow is a record structure that matches the actual MASTER table
      .. apply business rules and validation to the data.. raising user exceptions as needed
      -- e.g. the POSITION column must be upper case
      masterRow.position := upper(masterRow.position);
      -- after the business logic and data validation we can add the row to the table
      -- (PL will make the INSERT call to the SQL engine)
      insert into master values masterRow;
    end;No commit. The caller does the business transaction. It needs to decide when to commit to maintain the integrity of the data in the database. It may need to do several more calls, before committing.
    With this approach, we can give the application schema (the caller) execute privs on this procedure. This procedure is defined with definer rights. This means it runs with the privs of owner of that procedure and MASTER table. It is trusted code. It does all the correct stuff to add a valid and checked row to the MASTER table. So we give the app schema execute privs on the procedure and no insert priv on the MASTER table.
    The only way the caller can add row to the MASTER table is via this trusted procedure of ours.
    And this is a typical approach in Oracle - using the PL/SQL (both PL language and SQL language) code to create an interface to a logical database in Oracle. Abstracting the complexities of SQL from the caller. Moving business and validation into PL. Allowing us the flexibility of modifying business and validation logic, without touching a single byte of caller/client code. Allowing us to manage and tune SQL performance without dealing with (badly designed and coded) SQL from a client - as the SQL resides in PL/SQL packages and procedures and functions.

  • Converting SQL Server text field containing XML string to XI XML via JDBC

    Hello
    My client has a SQL Server database containing a field of type Text which contains an XML string e.g.
    <DispatchJob> <DispatchDateTime>2003-09-29T13:29:15</DispatchDateTime> <AssignedFSE>F118</AssignedFSE> <DispatchJobPurchase> <DealerID>14C5</DealerID> <DateOfPurchase>1997-10-01T00:00:00</DateOfPurchase> </DispatchJob>
    I am using JDBC to access this but could someone please recommend the best and easiest solution for converting this string to XI XML for subsequent mapping to BAPI or IDOC or ABAP Proxy and transmission to SAP. There are other fields as well in the database table so thoughts at the moment are to use a normal graphical message mapping followed by an XSL mapping. Will an XSL mapping be able to do this and if so is that the best solution?
    Also I need to do the reverse of this and take fields coming from SAP via BAPI,IDOC etc. and convert them to a single database table field as an XML string also via the JDBC adapter. What is the best way to do this. Could it be done simply with functions in the graphical mapping e.g. concatenate?
    Thank you in advance.
    Trevor

    Hi Michal
    Thanks for the prompt reply.
    I was anticipating XSLT for reading from the SQL Server database and converting the XML string.
    But how would you convert the individual fields from SAP into a single field as an XML string for storing in the SQL Server database? What approach would you use?
    Regards
    Trevor

Maybe you are looking for