Convert the smartform output to PDF when giving print from vf31
Hi Gurus,
I am facing one problem.I developed the program to chnage smartform output to PDF file when giving invoice print from VF02/VF03.
The same functionality i want to appy when i am giving print for the invoice through VF31.
I put the break-point in the driver program.But it is not stopping there when i am giving print from VF31.
How can i do this one..
Please Help Me.
Thanks &Regards,
R.P.Sastry
Which Program you are putting the Breakpoint?
Similar Messages
-
Problem in sending the Smartform Output as PDF through Mail
Dear All,
I am sending the Smartform Output as an attachment by converting it into PDF. But when I am recieve this attachment I am unable to open the PDF file, it is giving error that FILE IS DAMAGED. Below is the code:
REPORT Y_SEND_MAIL2.
TABLES: vbrk, vbrp.
TYPE-POOLS: abap.
DATA: it_vbrk TYPE TABLE OF vbrk WITH HEADER LINE.
DATA: i_formname TYPE tdsfname,
i_fm_name TYPE rs38l_fnam,
it_vbak TYPE TABLE OF vbak WITH HEADER LINE,
it_ekko TYPE TABLE OF ekko WITH HEADER LINE.
DATA: is_bil_invoice TYPE lbbil_invoice,
output_options TYPE ssfcompop,
control_parameters TYPE ssfctrlop,
e_devtype TYPE rspoptype,
job_output_info TYPE ssfcrescl,
bin_file TYPE xstring,
lines TYPE TABLE OF tline WITH HEADER LINE,
doctab_archive TYPE TABLE OF docs WITH HEADER LINE,
filelength TYPE i,
bin_filesize TYPE i,
docs TYPE TABLE OF docs WITH HEADER LINE.
*"Types
TYPES: t_document_data TYPE sodocchgi1,
t_packing_list TYPE sopcklsti1,
t_attachment TYPE solisti1,
t_body_msg TYPE solisti1,
t_receivers TYPE somlreci1,
t_pdf TYPE tline.
*"Workareas
DATA :w_document_data TYPE t_document_data,
w_packing_list TYPE t_packing_list,
w_attachment TYPE t_attachment,
w_body_msg TYPE t_body_msg,
w_receivers TYPE t_receivers,
w_pdf TYPE t_pdf.
*internal tables
DATA : i_document_data TYPE STANDARD TABLE OF t_document_data,
i_packing_list TYPE STANDARD TABLE OF t_packing_list,
i_attachment TYPE STANDARD TABLE OF t_attachment,
i_body_msg TYPE STANDARD TABLE OF t_body_msg,
i_receivers TYPE STANDARD TABLE OF t_receivers,
i_pdf TYPE STANDARD TABLE OF t_pdf.
DATA: BEGIN OF line_bin,
data(1024) TYPE x,
END OF line_bin.
DATA: data_tab_bin LIKE STANDARD TABLE OF line_bin.
So please suggest a solution.
Regards,
VishalContinued:
SELECT-OPTIONS: s_vbeln FOR vbrk-vbeln,
s_fkdat FOR vbrk-fkdat OBLIGATORY DEFAULT sy-datum.
SELECT * FROM vbrk
INTO TABLE it_vbrk
WHERE fkdat IN s_fkdat
AND vbeln IN s_vbeln.
i_formname = 'Z_SD_JINDAL_INVOICE10'.
output_options-tddest = 'LP02'.
output_options-tdimmed = 'X'.
output_options-tdnewid = 'X'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = i_formname
IMPORTING
fm_name = i_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0. "checking subrc
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. "IF sy-subrc <> 0
READ TABLE it_vbrk INDEX 1.
IF sy-subrc = 0.
is_bil_invoice-hd_gen-bil_number = it_vbrk-vbeln.
ENDIF.
control_parameters-no_dialog = 'X'.
control_parameters-getotf = 'X'.
CALL FUNCTION i_fm_name "'/1BCDWB/SF00000097'
EXPORTING
control_parameters = control_parameters
output_options = output_options
user_settings = space
is_bil_invoice = is_bil_invoice
IMPORTING
job_output_info = job_output_info
TABLES
it_vbak = it_vbak
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*FORM convert_otf_2_pdf.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
* EXPORTING
* USE_OTF_MC_CMD = 'X'
* ARCHIVE_INDEX =
IMPORTING
bin_filesize = bin_filesize
TABLES
otf = job_output_info-otfdata[]
doctab_archive = docs[]
lines = lines[]
EXCEPTIONS
err_conv_not_possible = 1
err_otf_mc_noendmarker = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*ENDFORM. "convert_otf_2_pdf -
Converting smartforms output into PDF
Hi ALL,
How to convert the smartforms output into PDF based form. After executing the form, it should directly open in PDF. How to do this?
Points will be awarded.
Thanks and regards,
vinoth.Hi Vinoth Kumar,
Please go throuh the below procedure and sample Code, this might help you.
Procedure
When we activate the Smartform the system generates a Function Module. The function module name we can get from Smartfrom screen from menubar
Environment => Function Module_Name . In a report we can get this Function module name by calling a Function Module standard SSF_FUNCTION_MODULE_NAME. This function module at runtime calls the FM generated by smartform, which in turn is then used to pass data from the report to Smartform. In the report given below the FM generated is /1BCDWB/SF00000152 . In this FM we can see CONTROL_PARAMETERS in import tab. This is of type SSFCTRLOP. We need to set the GETOTF of this to be X. Setting this field will activate the OTF field in smartform.
In export tab of the FM generated by smartform we can see a parameter JOB_OUTPUT_INFO which is of type SSFCRESCL. The SSFCRESCL is a structure of having one of fields as OTFDATA. OTFDATA in turn is a table of type ITCOO. ITCOO has two fields TDPRINTCOM and TDPRINTPAR. TDPRINTCOM represents command line of OTF format data and TDPRINTPAR contains command parameters of OTF format data.
In every Smartform output in OTF format, TDPRINTCOM begins and ends with //. EP represents the end-of-page value for TDPRINTCOM field.
In addition we need to set few fields at the place where we call this FM(generated by smartform) in our program. While calling this FM we should set control_parameters, output_options, user_settings and job_putput_info fields as shown in program.
Once these settings are done we can call Function Module CONVERT_OTF to convert the OTF data of smartfrom output to PDF data format. Once these are done we can call method cl_gui_fronted_services=>file_save_dialog to specify the directory path where we want to save the output PDF file. After this we can call Function Module GUI_DOWNLOAD to download the PDF file on our local system.
Here is a sample code of program to perform the function.
SAMPLE CODE
*& Report ZAMIT_SMART_FORM_PDF *
REPORT ZAMIT_SMART_FORM_PDF .
data: carr_id type sbook-carrid,
cparam type ssfctrlop,
outop type ssfcompop,
fm_name type rs38l_fnam.
DATA: tab_otf_data TYPE ssfcrescl,
pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
file_size TYPE i,
bin_filesize TYPE i,
FILE_NAME type string,
File_path type string,
FULL_PATH type string.
parameter: p_custid type scustom-id default 1.
select-options: s_carrid for carr_id default 'LH' to 'LH'.
parameter: p_form type tdsfname default 'ZAMIT_SMART_FORM'.
data: customer type scustom,
bookings type ty_bookings,
connections type ty_connections.
start-of-selection.
suppressing the dialog box for print preview****************************
outop-tddest = 'LP01'.
cparam-no_dialog = 'X'.
cparam-preview = SPACE.
cparam-getotf = 'X'.
select single * from scustom into customer where id = p_custid.
check sy-subrc = 0.
select * from sbook into table bookings
where customid = p_custid
and carrid in s_carrid
order by primary key.
select * from spfli into table connections
for all entries in bookings
where carrid = bookings-carrid
and connid = bookings-connid
order by primary key.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting formname = p_form
variant = ' '
direct_call = ' '
importing fm_name = fm_name
exceptions no_form = 1
no_function_module = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
Hope this resolves your query.
Reward all the helpful answers.
Regards
calling the generated function module
call function fm_name
exporting
archive_index =
archive_parameters =
control_parameters = cparam
mail_appl_obj =
mail_recipient =
mail_sender =
output_options = outop
user_settings = SPACE
bookings = bookings
customer = customer
connections = connections
importing
document_output_info =
job_output_info = tab_otf_data
job_output_options =
exceptions formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
others = 5.
if sy-subrc <> 0.
error handling
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
tab_otf_final[] = tab_otf_data-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
IMPORTING
bin_filesize = bin_filesize
BIN_FILE =
TABLES
otf = tab_otf_final
lines = pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
WINDOW_TITLE =
DEFAULT_EXTENSION =
DEFAULT_FILE_NAME =
FILE_FILTER =
INITIAL_DIRECTORY =
WITH_ENCODING =
PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = FILE_NAME
path = FILE_PATH
fullpath = FULL_PATH
USER_ACTION =
FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
************downloading the converted PDF data to your local PC*******
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = bin_filesize
filename = FULL_PATH
filetype = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
IMPORTING
filelength = file_size
TABLES
data_tab = pdf_tab
FIELDNAMES =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
IF sy-subrc <> 0.
ENDIF. -
I have a problem in converting smartform output to pdf format.
Hi,
While converting the smartform output to pdf format.
It is showing this error.
otf end command // missing in otf data.
I have used this function.
Assigning the OTFDATA to OTF Structure table
CLEAR gt_otf.
gt_otf[] = gs_otfdata-otfdata[].
Convert the OTF DATA to SAP Script Text lines
CLEAR gt_pdf_tab.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = gv_bin_filesize
TABLES
otf = gt_otf
lines = gt_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Please help me in this regard. Thanks in advance.Hi ,
I am getting this exception "err_conv_not_possible"
CALL FUNCTION f_name " '/1BCDWB/SF00000092'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = st_control_parameters
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = st_output_options
USER_SETTINGS = 'X'
ZST_TEXTSYMBOLS = ZST_TEXTSYMBOLS
wa_kna1 = wa_kna1
wa_claim_header = wa_claim_header
IMPORTING
DOCUMENT_OUTPUT_INFO = st_document_output_info
JOB_OUTPUT_INFO = st_job_output_info
JOB_OUTPUT_OPTIONS = st_job_output_options
TABLES
IT_CLAIM_VERSION = IT_CLAIM_VERSION
IT_CLAIM_ITEM = IT_CLAIM_ITEM
IT_CLAIM_PARTNER = IT_CLAIM_PARTNER
IT_FINAL = IT_FINAL
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
EXPORTING
USE_OTF_MC_CMD = 'X'
ARCHIVE_INDEX =
IMPORTING
BIN_FILESIZE = v_bin_filesize
TABLES
OTF = st_job_output_info-OTFDATA[]
DOCTAB_ARCHIVE = it_docs
LINES = it_lines
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
HERE when i tried to debug it i got SY-SUBRC = 1.
Please help me in this regard. Thanks in advance. -
Smartform Output to PDF conversion
Hi experts,
i want to convert the smartform output to PDF Format and stored it in system level.But i got the following information message "OTF end command // missing in OTF data".
I used "CONVERT_OTF" for conversion of smartform output and "WS_DOWNLOAD & GUI_DOWNLOAD".
wt it means,can i make any changes,if tl me why it shows the message.
points wl be rewarded.
Thank you
chandu
Edited by: Chandu Valluri on Jan 4, 2008 12:56 PMhi,
*& Report ZPDF_DNLD_TEST2 *
*& DEVK904540 *
REPORT ZPDF_DNLD_TEST2 .
data: i_otf LIKE itcoo OCCURS 100 WITH HEADER LINE,
i_pdf LIKE tline OCCURS 100 WITH HEADER LINE.
data: op_option type SSFCTRLOP,
job_output type SSFCRESCL.
op_option-getotf = 'X'.
CALL FUNCTION '/1BCDWB/SF00000005'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = op_option
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
itab1 = itab1
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO = job_output
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE =
BIN_FILE =
TABLES
otf = job_output-otfdata
lines = i_pdf
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = 'c:\test_pdf_sf.pdf'
FILETYPE = 'BIN'
tables
data_tab = i_pdf
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Logo in Smartform output to pdf format is coming as Junk Character
Hi All,
I have a requirement to generate the Smartform output in PDF file. But when i am doing that i am getting the LOGO as Junk character in the PDF file. Can any one help me to resolve this issue?.
Thanks,
Muruganand.KYes check the spool and the output displayed correctly in the spool it means there is a problem when you convert OTF to PDF. Check that part of the code and try different options.
-
Convert ABAP list output to PDF without spool
Hi All,
We have used the FM 'CONVERT_ABAPSPOOLJOB_2_PDF' to convert the list output to PDF. It creates the spool number in SP01 and PDF is getting generated.
But, in our SAP ECC 6.0 server all spools are redirected to printer by default and get printed because it configured like that. We requested BASIS people to reconfigure but they said no for a single report.
So we need to find the alternate solution to generate the PDF without spool. We have searched in sdn, but didnot get any alternate solution.
Please help us in this regard.
Thanks in advance.data: begin of i_list occurs 0,
line(255),
end of i_list.
data:i_mara like mara occurs 0 with header line.
parameters: p_matnr like mara-matnr.
start-of-selection.
set pf-status 'PDFFILE'.
select *
from mara
into table i_mara
where matnr = p_matnr.
loop at i_mara.
write:i_mara-matnr,i_mara-ernam,i_mara-pstat.
endloop.
at user-command.
if sy-ucomm = 'PDF'.
DO.
READ LINE SY-INDEX.
IF SY-SUBRC NE 0.
EXIT.
ELSE.
I_LIST = SY-LISEL.
APPEND I_LIST.
ENDIF.
ENDDO.
NEW-PAGE PRINT ON DESTINATION 'LP03' IMMEDIATELY ' ' COVER TEXT ' ' KEEP IN SPOOL 'X' NEW LIST IDENTIFICATION 'X' LINE-SIZE 132 LINE-COUNT 65 NO DIALOG.
LOOP AT I_LIST.
IF I_LIST-LINE IS INITIAL.
SKIP.
ELSE.
at first.
write: TEXT-001.
endat.
WRITE: I_LIST-LINE+0(132).
ENDIF.
ENDLOOP.
NEW-PAGE PRINT OFF.
data:filename like RLGRAP-filename value 'C:\PDFFILE.PDF'.
DATA: SPOOL TYPE TSP01-RQIDENT.
SPOOL = SY-SPONO.
SUBMIT rstxpdft4
WITH spoolno = spool
WITH download = 'X'
WITH p_file = filename
AND RETURN.
if sy-subrc = 0.
write: 'pdf file generated'.
else.
write:'pdf file not generated'.
EXIT.
endif.
endif.
please paste this code and check once ,if it works modify the code according to ur requirement.
regards,
padmaja -
How to Convert spool which is for smartform output to PDF?
how to Convert spool which is for smartform output to PDF?
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF' is not working for smartform output,
if i use this there will be error spool not contain list output?
than whats the function module or way to convert spool contain smartform output to pdg?
regards,<b>Procedure</b>
When we activate the Smartform the system generates a Function Module. The function module name we can get from Smartfrom screen from menubar
Environment => Function Module_Name . In a report we can get this Function module name by calling a Function Module standard SSF_FUNCTION_MODULE_NAME. This function module at runtime calls the FM generated by smartform, which in turn is then used to pass data from the report to Smartform. In the report given below the FM generated is /1BCDWB/SF00000152 . In this FM we can see CONTROL_PARAMETERS in import tab. This is of type SSFCTRLOP. We need to set the GETOTF of this to be X. Setting this field will activate the OTF field in smartform.
In export tab of the FM generated by smartform we can see a parameter JOB_OUTPUT_INFO which is of type SSFCRESCL. The SSFCRESCL is a structure of having one of fields as OTFDATA. OTFDATA in turn is a table of type ITCOO. ITCOO has two fields TDPRINTCOM and TDPRINTPAR. TDPRINTCOM represents command line of OTF format data and TDPRINTPAR contains command parameters of OTF format data.
In every Smartform output in OTF format, TDPRINTCOM begins and ends with //. EP represents the end-of-page value for TDPRINTCOM field.
In addition we need to set few fields at the place where we call this FM(generated by smartform) in our program. While calling this FM we should set control_parameters, output_options, user_settings and job_putput_info fields as shown in program.
Once these settings are done we can call Function Module CONVERT_OTF to convert the OTF data of smartfrom output to PDF data format. Once these are done we can call method cl_gui_fronted_services=>file_save_dialog to specify the directory path where we want to save the output PDF file. After this we can call Function Module GUI_DOWNLOAD to download the PDF file on our local system.
<b>Here is a sample code of program to perform the function.</b>
SAMPLE CODE
[code]*&---------------------------------------------------------------------*
*& Report ZAMIT_SMART_FORM_PDF *
REPORT ZAMIT_SMART_FORM_PDF .
data: carr_id type sbook-carrid,
cparam type ssfctrlop,
outop type ssfcompop,
fm_name type rs38l_fnam.
DATA: tab_otf_data TYPE ssfcrescl,
pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
file_size TYPE i,
bin_filesize TYPE i,
FILE_NAME type string,
File_path type string,
FULL_PATH type string.
parameter: p_custid type scustom-id default 1.
select-options: s_carrid for carr_id default 'LH' to 'LH'.
parameter: p_form type tdsfname default 'ZAMIT_SMART_FORM'.
data: customer type scustom,
bookings type ty_bookings,
connections type ty_connections.
start-of-selection.
***************** suppressing the dialog box for print preview****************************
outop-tddest = 'LP01'.
cparam-no_dialog = 'X'.
cparam-preview = SPACE.
cparam-getotf = 'X'.
select single * from scustom into customer where id = p_custid.
check sy-subrc = 0.
select * from sbook into table bookings
where customid = p_custid
and carrid in s_carrid
order by primary key.
select * from spfli into table connections
for all entries in bookings
where carrid = bookings-carrid
and connid = bookings-connid
order by primary key.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting formname = p_form
* variant = ' '
* direct_call = ' '
importing fm_name = fm_name
exceptions no_form = 1
no_function_module = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
* calling the generated function module
call function fm_name
exporting
* archive_index =
* archive_parameters =
control_parameters = cparam
* mail_appl_obj =
* mail_recipient =
* mail_sender =
output_options = outop
user_settings = SPACE
bookings = bookings
customer = customer
connections = connections
importing
* document_output_info =
job_output_info = tab_otf_data
* job_output_options =
exceptions formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
others = 5.
if sy-subrc <> 0.
* error handling
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
tab_otf_final[] = tab_otf_data-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
* ARCHIVE_INDEX = ' '
* COPYNUMBER = 0
* ASCII_BIDI_VIS2LOG = ' '
IMPORTING
bin_filesize = bin_filesize
* BIN_FILE =
TABLES
otf = tab_otf_final
lines = pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILE_NAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* WITH_ENCODING =
* PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = FILE_NAME
path = FILE_PATH
fullpath = FULL_PATH
* USER_ACTION =
* FILE_ENCODING =
* EXCEPTIONS
* CNTL_ERROR = 1
* ERROR_NO_GUI = 2
* NOT_SUPPORTED_BY_GUI = 3
* others = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*************downloading the converted PDF data to your local PC********
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = bin_filesize
filename = FULL_PATH
filetype = 'BIN'
* APPEND = ' '
* WRITE_FIELD_SEPARATOR = ' '
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = ' '
* WRITE_LF = 'X'
* COL_SELECT = ' '
* COL_SELECT_MASK = ' '
* DAT_MODE = ' '
* CONFIRM_OVERWRITE = ' '
* NO_AUTH_CHECK = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = ' '
* TRUNC_TRAILING_BLANKS_EOL = 'X'
IMPORTING
filelength = file_size
TABLES
data_tab = pdf_tab
* FIELDNAMES =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
IF sy-subrc <> 0.
ENDIF.
[/code]
Thanks and Regards,
Pavankumar -
Convert spool (which is for smartform output) to PDF?
how to Convert spool which is for smartform output to PDF?
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF' is not working for smartform output,
if i use this there will be error spool not contain list output?
than whats the function module or way to convert spool contain smartform output to pdg?
regards,hi,
use this instead
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZNAK_SMARTFORM_CORRESPONDENCE'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = func_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
printer-getotf = 'X'.
printer-no_dialog = 'X'.
CALL FUNCTION func_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = printer
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
validity = ls_smart-validity
lifnr = ls_smart-lifnr
name1 = ls_smart-name1
pstlz = ls_smart-pstlz
regio = ls_smart-regio
stras = ls_smart-stras
smtp_addr = ls_smart-smtp_addr
IMPORTING
DOCUMENT_OUTPUT_INFO =
job_output_info = printer1
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
t_otf[] = printer1-otfdata.
DATA gt_tline like TABLE OF tline occurs 0 with header line.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
EXPORTING
USE_OTF_MC_CMD = 'X'
ARCHIVE_INDEX =
IMPORTING
bin_filesize = w_file
TABLES
otf = t_otf
doctab_archive = gt_docs
lines = gt_tline
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Error while converting smartform output to pdf
hi
while converting smartform output to pdf error occured otf data not founr.
regarding code is as follows:
otfitab = i_job_output_info-otfdata.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
EXPORTING
USE_OTF_MC_CMD = 'X'
ARCHIVE_INDEX =
IMPORTING
bin_filesize = l_pdf_len
TABLES
otf = otfitab
doctab_archive = t_docs_tab
lines = pdfitab
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
rest all declarations are up to date.
thanks in advance..........Hi Mayank,
I am not sure if u know this already, we can convert the spool ouput to PDF
by using the program RSTXPDFT4.
Regards,
Vivek -
When I try to print an jpeg or png from Photoshop all it does is convert the image to a PDF & plop it on my desktop- it won't print the image. Any suggestions as to how to fix this?
Yes, the printer is on, it’s selected in Printer Set-Up & I’ve never had this problem before. It’s definitely a Photoshop issue as every other type of file prints fine. I’ve uninstalled Pshop & am now reinstalling. Hope that will do the trick.
-
Smartform Output To PDF And Send It As External Mail
Dear All,
I am sending the Smartform Output as an attachment by converting it into PDF. But when I am recieve this attachment I am unable to open the PDF file,it is giving error that FILE IS DAMAGED
So please suggest a solution.
Regards,
BhaveshREPORT ZTEST_PDF_MAIL.
Internal Table declarations
PARAMETERS : p_ebeln TYPE ekko-ebeln DEFAULT '4500000003'.
DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
WA_OBJHEAD TYPE SOLI_TAB,
W_CTRLOP TYPE SSFCTRLOP,
W_COMPOP TYPE SSFCOMPOP,
W_RETURN TYPE SSFCRESCL,
WA_DOC_CHNG TYPE SODOCCHGI1,
W_DATA TYPE SODOCCHGI1,
WA_BUFFER TYPE STRING, "To convert from 132 to 255
Variables declarations
V_FORM_NAME TYPE RS38L_FNAM,
V_LEN_IN LIKE SOOD-OBJLEN,
V_LEN_OUT LIKE SOOD-OBJLEN,
V_LEN_OUTN TYPE I,
V_LINES_TXT TYPE I,
V_LINES_BIN TYPE I.
DATA:it_pdfdata TYPE TABLE OF tline.
DATA:it_pdf TYPE TABLE OF solisti1.
BREAK-POINT .
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZCSF_MM_PO_ORIGINAL'
IMPORTING
FM_NAME = V_FORM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
W_CTRLOP-GETOTF = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_COMPOP-TDNOPREV = 'X'.
CALL FUNCTION V_FORM_NAME
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = 'X'
P_EBELN = P_EBELN
IMPORTING
JOB_OUTPUT_INFO = W_RETURN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I_OTF[] = W_RETURN-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = V_LEN_IN
TABLES
OTF = I_OTF
LINES = I_TLINE
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
LOOP AT I_TLINE.
TRANSLATE I_TLINE USING '~'.
CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
I_RECORD = WA_BUFFER.
APPEND I_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: I_RECLIST,
I_OBJTXT,
I_OBJBIN,
I_OBJPACK.
CLEAR WA_OBJHEAD.
I_OBJBIN[] = I_RECORD[].
Create Message Body Title and Description
I_OBJTXT = 'test with pdf-Attachment!'.
APPEND I_OBJTXT.
DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
READ TABLE I_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR I_OBJPACK-TRANSF_BIN.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_TXT.
I_OBJPACK-DOC_TYPE = 'RAW'.
APPEND I_OBJPACK.
Attachment (pdf-Attachment)
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
READ TABLE I_OBJBIN INDEX V_LINES_BIN.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'smart'.
I_OBJPACK-OBJ_DESCR = 'test'.
APPEND I_OBJPACK.
CLEAR I_RECLIST.
I_RECLIST-RECEIVER = 'XYZ'.
I_RECLIST-REC_TYPE = 'U'.
APPEND I_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF. -
Convert SAP spool output to PDF
I have created program running in background to convert SAP spool output to PDF using function CONVERT_ABAPSPOOLJOB_2_PDF .
It has been working fine untill I have SAP spool contained > 99 pages. It has a dialog pop up asking to run it in background.
If I clicked YES, the function generated another background job and another spool.
Also the returned table PDF contained no data.
But it is ok when click NO. The program can generate PDF file.
My problem is I want to set this program as job, so it will not generate PDF file when SAP spool contained > 99 pages.
Has anyone experienced about this problem? or know how to convert to PDF from SAP spool (>99 pages)?
Thank you in Advance.Hi,
Use the FM convert_otfspooljob_2_pdf
see this link for example Re: Download in PDF format
"Do not use CONVERT_ABAPSPOOLJOB_2_PDF for script or Smartforms
Prabhudas -
Converting simple report output to PDF print layout issue
Hi all,
I am converted one report output to PDF format, it is working fine in one DEV sever, but when we moved it to other server the layout of output preview & font size is not coming properly (as same in DEV server) in the new server. I am using the below code, please check & correct me if anything is wrong.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
copies = '1'
cover_page = space
destination = 'LOCL'
expiration = '1'
immediately = space
mode = space
new_list_id = 'X'
no_dialog = 'X'
user = sy-uname
line_size = 200
line_count = 65
* layout = 'Z_65_230'
layout = 'X_58_170'
sap_cover_page = 'X'
IMPORTING
out_parameters = mstr_print_parms
valid = mc_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc EQ 0.
**--Creating Spool Request.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = lv_job_name
IMPORTING
jobcount = lv_job_count
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
**--Submitting the Report & Get the Output.
SUBMIT zpsr_submit_prcng WITH SELECTION-TABLE t_ebeln TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS mstr_print_parms
USER sy-uname " User for runtime authorizations
VIA JOB lv_job_name
NUMBER lv_job_count
AND RETURN.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = lv_job_count
jobname = lv_job_name
strtimmed = 'X'
IMPORTING
job_was_released = lv_job_released.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Thanks & Regards
Avish
Moderator Message: Please use code tags when pasting code snippets. Also paste relevant portions of the code
Edited by: Suhas Saha on Jul 13, 2011 3:05 PMDear Alexander,
Thanks for the reply.
In this I am using the FM 'CONVERT_ABAPSPOOLJOB_2_PDF'. I have checked the settings from SPAD that is also same in both servers for particular output device. But the patches are diffrennt in both the servers, the server from which layout is not coming properly having the high level patches in compare to the other server(which is working fine). -
Smartform output to pdf and send through mail
Hi,
I am able to save the output of the smartform as pdf file and able to send the pdf as attachment in mail.
But the problems are -
1 - As i have set the field - 'X' TO ls_control_param-getotf.
I am unable to view the print preview of the billing document and no spool is getting displayed. I want to see the print preview and create a spool and also generate a pdf file.
2- I am using the FM SO_DOCUMENT_SEND_API1 to send the mail of the pdf file. But i am getting the message like
"Cannot extract the embedded font 'FranklinGothalicITCBook'. Some charactersmay not display or print correctly" followed by "An error exists on this page. Acrobat may not display the page correctly".
Pls help me in resolving the issues.
Thanks,
RajuHi
I was worked on similar type of requirement. For your reference, please check the below piece of code which i have developed for my requirement.
FORM ENTRY USING RETCODE
US_SCREEN.
*Check if Nast key is initial or not
IF NAST-OBJKY IS NOT INITIAL.
*if nast-objkey is not initial than we need to get the smartform name
*which is ZSF_PURCHASE_ORDER01
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = C_FORM
IMPORTING
FM_NAME = G_FNAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
*if sy-subrc ne 0 than we need to update the nast entry with error
IF SY-SUBRC <> 0.
RETCODE = 1.
PERFORM NAST_PROTOCOL_UPDATE.
EXIT.
ENDIF.
*check if we need to take a print out
CLEAR W_CTRLOP.
IF SY-UCOMM = 'PREVOUTPUT'.
NAST-NACHA = '1'.
ENDIF.
OUTPUT TO PRINTER
IF NAST-NACHA = C_1. " Output to Printer
W_COMPOP-TDDEST = NAST-LDEST.
W_COMPOP-TDNEWID = 'X'.
W_COMPOP-TDIMMED = 'X'.
W_COMPOP-TDDELETE = 'X'.
W_COMPOP-TDLIFETIME = 1.
W_COMPOP-TDFINAL = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_CTRLOP-DEVICE = 'PRINTER'.
W_CTRLOP-PREVIEW = 'X'.
*Smartform is called and print program is done
CALL FUNCTION G_FNAME
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = ' '
WA_NAST = NAST
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
*if print program is successful we need to update the nast entry
IF SY-SUBRC EQ 0.
RETCODE = 0.
IF US_SCREEN EQ 'X'.
PERFORM NAST_PROTOCOL_UPDATE.
ELSEIF SY-SUBRC NE 0.
*if print program is not successful than we need to update the nast
*entry
RETCODE = 1.
PERFORM NAST_PROTOCOL_UPDATE.
EXIT.
ENDIF.
ENDIF.
OUTPUT TO MAIL
ELSEIF NAST-NACHA = C_5. " External Mail
We need to get the smartform into OTF file format
W_CTRLOP-GETOTF = 'X'.
IF NAST-TCODE = 'ZLE'.
W_COMPOP-TDDEST = 'LOCL'.
ENDIF.
CALL FUNCTION G_FNAME
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = ' '
WA_NAST = NAST
IMPORTING
JOB_OUTPUT_INFO = WA_RETURN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
*update the nast entry accordingly
IF SY-SUBRC EQ 0.
RETCODE = 0.
IF US_SCREEN EQ 'X'.
PERFORM NAST_PROTOCOL_UPDATE.
ELSEIF SY-SUBRC NE 0.
RETCODE = 1.
PERFORM NAST_PROTOCOL_UPDATE.
EXIT.
ENDIF.
ENDIF.
*convert the smartform data into OTF file
DATAB[] = WA_RETURN-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 134
ARCHIVE_INDEX = ' '
ASCII_BIDI_VIS2LOG = 'X'
PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = BINFILESIZE
TABLES
OTF = DATAB[]
LINES = PDFTAB[]
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5.
*if file conversion fails we need to update the nast entry
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
EXPORTING
LINE_WIDTH_SRC = 134
LINE_WIDTH_DST = 255
TRANSFER_BIN = 'X'
TABLES
CONTENT_IN = PDFTAB[]
CONTENT_OUT = PDF[]
EXCEPTIONS
ERR_LINE_WIDTH_SRC_TOO_LONG = 1
ERR_LINE_WIDTH_DST_TOO_LONG = 2
ERR_CONV_FAILED = 3
OTHERS = 4.
*if conversion fails update the nast entry accordingly
IF SY-SUBRC <> 0.
RETCODE = 1.
PERFORM NAST_PROTOCOL_UPDATE.
EXIT.
ENDIF.
Hope it helps...
Maybe you are looking for
-
Can I upgrade my laptop Graphic Card
I have a HP DV6 B1N18EA, its has the nividia geforce 630m 2 gb detecated, I need a better graphic card to upgrade it. So can anyone please tell me if i can
-
How to reset System Password on SRW2024
I have very limited knowledge in the area of switches... but strong expertise with computers in general. Our SRW2024 switches were configured several years back, and somewhere along the way someone set and lost the passwords. How does one go about re
-
Help transferring Picasa to iPhoto
I have only recently moved to a Mac (hurrah) but when transferring my photos from Picasa to iPhoto, they all came across ok but without any comments/titles I had on them ... just a long set of digits. Can I get the comments back ??
-
After installing v. 25, all my buttons & fill in boxes have disappeared
I updated to the latest firefox version 25 a couple days ago and it has made my firefox basically unusable. None of the buttons or fill in boxes show up. Some of the lettering for the buttons show up but there is no outline or anything that shows it'
-
Calling opportunity from accounts application
Hi All, I tried calling opportunity application from accounts application by clicking on a tab , just like calling bsp application from pcui.Unfortunately it is calling the same accounts application. I tried this in opportunity a