Converting .m4p to .mp3 or .wav?

I have an iTunes problem someone might be able to help with? I have downloaded a .m4p music file in iTunes. I want to use it in photo editing software that only accepts .mp3, .wav and .wma file types, and didn't detect the m4p file in the folder it was in.
Is there any way to get m4p files into mp3/wav/wma formats (without risking overrunning my computer with viruses, spyware etc)? I know there may be legal issues too but I’m not very clear on them so if anyone can inform me that would be helpful.
These are the bright ideas I had so far that didn't work...
I tried to convert .m4p to .mp3/wav in iTunes - copied the file onto a CD, imported it back into iTunes and tried to convert it to .wav in iTunes. But I still got a message saying protected files cannot be converted to other formats.
I tried to download converting software to do this, eg
http://www.allformp3.com/m4a-to-mp3.htm
http://www.allmusicconverter.com/
But when I tried to run the software, I kept getting a warning message from Internet Explorer, saying the file did not have a valid digital signature that verified its publisher and advising not to run it, so I didn't run it.
I thought maybe I could open the file in another program and save it in an acceptable different format. I tried Windows Media Player 11, it wouldn't recognise .m4p, and wouldn't let me save in specific formats. I tried RealPlayer, it would open and play the file but wouldn't save it in another format.
Any advice appreciated!!
Thanks

Tracks purchased from any legal download store carrying major-label content, including the iTunes Store, are copy-protected (with the exception of music on EMI's labels, much of which is also available in a higher-quality, nonprotected format) and so cannot be directly converted to any other format. You can, however, burn the tracks purchased from the iTunes Store out to an audio CD, at which point it will act just like any other normal audio CD.

Similar Messages

  • Converting m4p to mp3...help needed

    Is it possible to convert the tunes I download from m4p to mp3 or wav?
    Thanks!

    Not directly, no. You need to burn the tracks to an audio CD, which you can then reimport in any format you wish.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic before you post a question.
    Regards.

  • Help on converting M4P to .MP3 format?

    Afternoon everyone ... new question here for me.
    What software do I need to convert M4P files back to MP3 files? iTunes doesn't like it when I try to say "create MP3 CD" when burning downloaded songs back to a disc. Any suggestions?
    Thanks!

    http://www.xilisoft-audio-converter.com-about.com/download.html
    Try this one, or:
    http://www.mp3-converter.biz/m4p-to-mp3-converter-directory/
    Cheers

  • Convert Cav to MP3 or Wav

    Hello you guys, I wanna convert Cav audio to MP3 or Wav. How do it ?

    I am not familiar with Cav. Do you mean .caf?
    http://en.wikipedia.org/wiki/Core_Audio_Format

  • Lossless convert m4p to mp3, wav, unprotected aac, etc.

    I see that similar questions have been posted many times over, but still can't find what I'm looking for. My goal is a lossless conversion from m4p to wav.
    Most solutions I've found on Apple Discussions is to first burn the audio track to a CD and then RE-import them in the format of your choosing. However, being a slight audiophile, I am concerned that the burn-and-import method is going to negatively affect the quality of the audio.
    Are there any legal "macApps" that will provide a lossless conversion of mp4 to wav (preferably w/o burning) ?
    cheers,
    -gd

    gigantedelicado wrote:
    I see that similar questions have been posted many times over, but still can't find what I'm looking for. My goal is a lossless conversion from m4p to wav.
    You really cannot. MP4 is a lossy format. You do not gain anything by converting to WAV - whatever you had before, would be gone when the MP4 was created. There is no benefit whatsoever for doing such a thing.

  • Converting .amr to .mp3 or .wav... ?

    Greetings. I have a new 6630 and find the Recorder facility useful. I record tunes going round in my head and hum or whistle them into the phone. I want to be able to convert the .amr file into something that I can share with other musicians...
    I've found the Nokia Multimedia Converter 2.0, but that only converts from .mp3 into .amr.
    Anyone know how to do it the other way round (.amr to .mp3)
    FLyiNg OkO

    Many thanks folks. I spent many hours searching for a way to convert .amr into .wav. This was the answer I needed at last. I followed one of your links - and was diverted to this other:- http://www.tucows.com/start_dl/399640_150063_1356/dlp/ It downloaded, installed and converted 10 files quickly and easily. Many thanks again.

  • I saved my aiff files to ext. storage.  Now how can I retrieve them and convert them to mp3 or wav files?

    I was trying to free up space on my internal storage, so when I created files in Garage Band, I thought it would be a great idea to store them in my external hard drive.  However, I now wanted to retrieve my files and burn them to a cd.  When I dragged and dropped them to iTunes, they showed up in my playlist, but when I tried to burn the playlist, I got a message telling me there were no files in the playlist.  Then I looked into putting them back into Garage Band and transferring from there to iTunes.  But do not know how to do this, or even if I can do this.  Do I have to always convert my aiff files to either wav or mpe files before I store them?  Is it a lost cause for me now?  Would really appreciate help on this.

    On the external drive, in the Finder, do a get Info on one of those & report size, where, etc.
    Also, if you double click on one, does iTunes play it?
    You could save some space without losing quality by converting them to Apple Lossless.

  • M4p to mp3?

    I want to convert my m4p songs to mp3 and I have heard of the software TuneClone, however I am always weary of downloading free software! Has anyone used TuneClone (safe to download?) or is there better software out there, or a better way to convert m4p to mp3?
    Thanks so much!

    You can convert songs in your iTunes library to another format using iTunes itself, you don't need other software. When you convert a song in iTunes it will be converted to the format that you have set to import your CDs in. Converting creates a second copy of the song in the format you have chosen which gives you the opportunity to either keep or delete the original. If you are using iTunes 8 go to Edit>Preferences>General and click on Import Settings, change your option to MP3. Go back to your library and highlight the songs you want to convert and go to the Advanced menu at the top of your iTunes window and choose "Create MP3 version.
    If you are using iTunes 7 have a look at these pages:
    iTunes: How to convert a song to a different file format
    How To Choose Import Settings
    One exception to this are standard copy protected songs purchased from the iTunes Music Store which can't be directly converted due to the DRM (Digital Rights Management) copy protection. However you can burn these to an Audio CD which will work like any regular CD.
    However, if these are songs you've ripped from CD it's always preferable to re-rip from the original uncompressed format rather than converting from one lossy format to another. In fact converting from one lossy format to another can result in even more quality loss. It's a bit like photocopying a photocopy, the farther you get away from the original the lower the quality

  • Converting iTunes (m4a) to mp3 or wav

    I have a fairly extensive iTunes library which I sync with my iPod Nano 2. My daughter has just been given an mp3 player for her birthday and I'm trying to find a simple way of exporting & converting tracks for her to either mp3 or WAV format without losing my m4a. Any ideas short of burning original to CD then re-importing under her account (where import of CD's is set to mp3)?
    I have managed to open an iTunes track as m4a within Quicktime and save as a wav file, but the file size went from 2.6 MB to 11.7 MB - not very practical.
    Cheers, Andy
    Message was edited by: Andy Faizey

    If the file is an .m4p then it is DRM protected and you can only burn is as an audio CD - you can figure out the rest.
    If the file is a .m4a - no DRM - then you should be able to convert it to an mp3 within iTunes. Change your iTunes import options prefs.
    MJ

  • How can I convert .m4p songs to .wav ?

    how can I convert *.m4p songs in ITunes  to *.wav songs ?

    the only way i have found is thru converter software. i use a program called "avs" it was $30 i believe, maybe $39. but it was the only way i found for me to convert itunes songs to a .wav file so my kids could put those songs on a "sansa" mp3 player.

  • Converting an MP3 to WAV -- How can I convert an MP3 to wav format, 16 bit

    How can I convert an MP3 to wav format, 16 bit, 44,1 khz? I like the program Switch which I know can convert MP3s, but how to I set it up for the specific settings that I need?

    Just import into a logic session. Then bounce at the specs you require. Logic or Waveburner, iTunes and even Quicktime I think can each do this easily.
    A question though. I am assuming you are converting an MP3 to 44.1/16 bit just so you can play the file in a consumer quality CD player?? IF so - that makes sense.
    But if you are doing this because you think it will improve the sound quality of your MP3, I will save you some time here. It won't improve the sound quality at all. It will just turn the MP3 into a larger audio file.
    44.1/16 bit resolution enables you to have a much better sounding file than MP3 formats, but not by going at it this way.
    No offense to you if you know all of this already. I am assuming that you may not know this - because if you did you would also likely know how to convert an audio file.
    Cheers
    Darrell

  • Mp3 to wav converter

    i am looking for mp3 to wav converter Api (in j2me) how it can be done help needed plz it 's urgent !
    hoping for an early reply

    no way!
    you've got a java api for j2se: the javasound api but it can't be available in j2me. best thing to do is to use a soft (like cdex,...) to convert mp3 to wav or, if you have an available server (like tomcat), create a app that uses javasound api to convert your songs when you put them on the server (via an admin console)
    peace

  • Converting From Mp3 to Wav and also dividing a song.

    Is it possible to convert an mp3 to .wav and then split the entire song into 10-second wavs. If there is a way, please share. Thank you. I'm using Quicktime Pro

    Nathan, welcome to these discussions.
    Open the .mp3 file with QT Pro.
    Set the "in and out" (selection markers) to the ten seconds you wish to convert and use "Copy" from the Edit menu.
    Open a new QT Player window (Control-N) and then Control-V (paste).
    Choose "Export" (File menu) and then choose Sound to Wave.
    Repeat for all the conversion you want to make.

  • Convert mp3 to Wav?

    Hi, i'm looking for a software that would allow me to convert mp3 to wav files. I have to upload files but the source only accepts wav files and I can't get itunes to export to wav format so your help would be much appreciated.

    I've used EasyWMA to convert audio formats before, and it may be able to do what you want. There is a limited free trial available:
    http://www.easywma.com/
    You can also try searching versiontracker.com or macupdate.com with the file types to see if there is other conversion software available.

  • HELPPPP!! need converter from  mp4 to mp3 or wave

    Does anybody knows how find converter for mp4 to mp3, wav, or anything that readable for the car cd player?
    Thanks
    Mac Book pro 17 inch   Mac OS X (10.4.5)  

    You should be able to use iTunes to convert your music to a different file format.
    *To convert a song's file format:
    Choose iTunes > Preferences, then click the Advanced button at the top of the window and click Importing.
    From the Import Using pop-up menu, choose the encoding format that you want to convert the song to, then click OK to save the settings.
    Select one or more songs in your library, then choose Advanced > Convert Selection to MP3, Convert Selection to AAC, Convert Selection to Apple Lossless, Convert Selection to AIFF, or Convert Selection to WAV. (The menu item changes to show what's selected in your Importing preferences.)
    To convert all the songs in a folder or on a disk, hold down the Option key and choose Advanced > "Convert Selection to," then choose the folder or disk containing the songs you want to convert. All the songs in the folder or on the disk will be converted except songs you purchased from the iTunes Store. (Purchased songs are encoded using a protected AAC format that prevents them from being converted.)
    *reference: iTunes Help
    Hope this helps.

Maybe you are looking for

  • Can A synonym be used in Discover?

    I am new to this tool and I have a schema with all objects that I need to develop my discover application, however, all these objects will have to be move to a different schema. I gave select,update, delete grant to the schema that I am going to use

  • Terminal is creating persistent 'invisible' screens

    This is 'solved' but I am puzzled how it arose and am hoping the (rather obvious!) solution might help others who find their Mac doing this. Recently I notice that, when a new window is requested, Terminal creates one but it is not visible except in

  • [SOLVED] Filesystem check failed on LVM partition...

    My server experienced a power outage last night, and I noticed today that it wasn't booting correctly. Apparently, the storage partition, /dev/mapper/VolGroup00-lvolstorage fails the filesystem check. The first time I booted into it, I ran a manual c

  • ADS test FR_TEST_00  hagns out

    Hi, I have configrured ADS as described in ADS Conif Guide. I have tested FP_PDF_TEST_00 succesfully. and other tests using broeser went fine. Now when I am testing FP_TEST_00 and FP*DESTINATION_SERVICE, testing  is not wroking. And it hangs out. thi

  • Auto start amavisd problem

    I have (finally) gotten amavisd and clamav installed and working. It works fine if I issue the command amavisd -debug from the terminal. I want it to start at boot and have the following line in my watchdog config file: amavis:respawn:/usr/local/sbin