Converting mac i pod to windows
I have an I pod classic 160G. I have been using it with a mac computer. I want to be able to convert this i pod to a PC without losing any of the music and video's. My job forces me to travel now and I have a windows laptop. Can a Mac I pod be converted to a windows pc?
*Can a Mac I pod be converted to a windows pc?*
Yes, you simply have to connect it to a PC and restore it in iTunes for Windows.
*I want to be able to convert this i pod to a PC without losing any of the music and video's*
Restoring will erase everything that's on the iPod. Restore it on the PC then connect it back to the Mac and reload it with from your original iTunes (Macs can read Windows formatting so you'll be able to connect and use the reformatted iPod on the Mac). Failing that load your iTunes for Windows library from any back up discs you have made of the library you have on the Mac and sync the library to the iPod on the PC.
Similar Messages
-
Converting Mac keyboard shortcuts to Windows/PC based shortcuts.
Hello,
Let me say, I have been using Mac based platforms since close to 1991 on and off. I used System 7 (and OS 8/9, but close enough to System 7) for many years up until I started to use Windows starting on the later 9x and XP platforms. As I start to drift away from Windows to more likely use Macs, however I would like to have a consistent keyboard shortcut system similar to Windows or Linux/UNIX (for that matter).
I actually get confused very easily switching from Macs and Windows with keyboard commands often when I use Windows comp and when I am using the Mac. (Just switching from different kinds of keyboards confuse me from the razor thin keys to a regular keyboard, because going from another one confuses me because of different pressures to press the on.)
I also believe this may have to do with a "workflow" process/scripting, if I am not mistaken. Is there a script I can download, that has close to the standard Windows/PC commands that I can import into the Mac, and can these scripts be edited to adapt my own commands as well? Is there a way to use most of the function keys (F1-12) for the standard commands for the different purposes? I also would like the Option (alt)-Tab to cycle the different apps and Option-Esc to cycle all windows opened. I would like to try to reduce all Option/Command/Control/Shift commands to just a couple of keystrokes or an F key. These modifier keys I think are becoming old, especially since it doesn't meet Apple's simplicity, giving there is up to three keystrokes to press at a given time for some commands.
I had tried the way on the System Preferences, but it doesn't go globally through all applications - real problem lies on the Apple apps on some. I strongly believe this is possible to do, since it might be able to work via a scripting system. I hope this could work. Apple has come a long way to open up the system's architecture without really messing things up, or just opening up the OS without hex apps is great. I hope they can just keep this up so the users can decide how they want their mac to work, because they know what's right for their purposes.
Thanks in advance,
StevenYou may like youpi key. It is free. It works fairly well for me in MAC OS 10.4 although not officially supported. There is a commercial version you can buy, called iKey.
http://www.versiontracker.com/dyn/moreinfo/macosx/11485&vid=75326
Here is my script for listing my application folder. I have it assigned to function-key 6.
tell application "Finder"
activate
select window of desktop
make new Finder window to startup disk
select Finder window 1
set target of Finder window 1 to folder "Applications" of startup disk
select Finder window 1
set position of Finder window 1 to {60, 45}
end tell
This script was automatically generated in script editor record mode. After I recorded the script and did some minor editing, I copy the script to youpi key.
I have all of my frequently used applications set to function keys. I am thinking of changing the switching to Scripts because there seems to be a side effect to some of the switching like the speaking. -
Video Format Total Solution: How to Convert and Edit Video on Windows/Mac
More and More video formats are coming out with different video encoders and it makes our spare time more and more colorful. However, it is not to say that there is no problems. Actually, different video formats make it difficult to share video with others, even your own camcorder and iPod. Is there an easy way to convert videos effectively. Yes, there is.
In this article, I will show you guys how to convert videos on windows and mac.
Part 1. How to Convert and Edit Videos on Windows
For Windows users, you need a Video Converter(http://www.aiseesoft.com/total-video-converter.html) to do that for you.
Here I use Aiseesoft Total Video Converter(http://www.aiseesoft.com/total-video-converter.html)
Step 1: Download and install Aiseesoft Total Video Converter
After you download it to your computer, double click it and it is really easy to install.
You just need to click “next” and it will complete it in seconds. It will automatically run after installation.
http://www.aiseesoft.com/images/guide/total-video-converter/screen.jpg
Step 2: Load Video
Click “Add File” to find the video that you want to convert and click “open”. It will be loaded automatically.
Step 3: Select the target to decode
In the “Profile” drop download list you can find your target according the usage of your output video, such as if you want to put the video on your iPod touch, you can select the “iPod” in the first list and “iPod touch 2 MPEG-4 640*480(*.mp4)” in the second list.
Step 4: Set Advanced Parameters
After you select the right output profile, you can click “setting” button to set your advanced parameters. You can adjust video and audio settings separately. In video section, you can change “video encoder”, “resolution”, “frame rate”, “video bitrate”In audio section, you can change “audio encoder”, “sample rate”, “channel”, “audio bitrate”If you want to save this profile and settings and use it next time you can click “save as” button to give a name to it. And the next time you want to use it you can find it in the profile list named “user defined”.
Step 5: Choose a Destination
To browse and find a output folder for your output files or just the default one.
Finally, Click “Convert” button to begin your conversion, here in the converting
interface you can choose “shut down the computer when conversion complete” or “open output folder when conversion complete” or you just do not choose neither one.
Tips: How to Edit the Output Video
This video converter is also a video editor, you can use it to edit your output video as follows:
http://www.aiseesoft.com/images/guide/total-video-converter/effect.jpg
1. Effect:
You are allowed to adjust the “Brightness”, “Contrast”, “Saturation” and you can choose the “deinterlacing” to make the video more enjoyable.
2. Trim:
In “Trim” section you can pick up any part of the video to convert.
There are two ways to select the part of the video you want. One is set the start and end time in the box. The other one is to drag the start and end button in the processing bar.
3. Crop:
This function allows you to choose a certain play area to convert. That means you can choose a part of the screen you like to convert. For example, you just like the tv in the middle of the screen, then you can drag the frame around the preview window to select the tv and the output preview will show you the output video.In this section you can also choose the “zoom mode”, such as “keep original”, “full screen”, “16:9”, “4:3”.
4. Watermark
In the section, you can add a watermark on the output video to show people something, such as your name, website, studio name or other things. The watermark could be words and picture. You can adjust the transparent of the watermark easily to make it more beautiful.
Part 2. How to Convert Video on Mac
This time you need a Video Converter for Mac(http://www.aiseesoft.com/video-converter-for-mac.html)
Step 1: Add File
Click “Add File” button to load the video you want to converter
http://www.aiseesoft.com/images/guide/mac-video-converter/steps.jpg
Step 2: Choose profile and adjust settings
You can find your output video format from a drop-list called “Profile”You can also adjust the specific settings of the output video, such as “Resolution”, “Bitrate”, “Encoder” and so on.@ Tamwini
Your only goal is to sell software.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
How to convert the CS6 MAC version to the Windows version?
I followed the advice to go to go/getserial, but the productcode i entered was "invalid", but the figures i entered are correct. What now ?
Thank you for the tip, but I only get to : ask the community.. No
contact with any agent.
Pat Willener schreef op 19/09/2014 11:25:
>
How to convert the CS6 MAC version to the Windows version?
created by Pat Willener <https://forums.adobe.com/people/pwillener> in
/Downloading, Installing, Setting Up/ - View the full discussion
<https://forums.adobe.com/message/6744036#6744036> -
Can you convert a favourites file from windows to a bookmark file for mac?
can you convert a favourites file from windows to a bookmark file for mac?
I can't answer for Internet Explorer but you should be able to export Bookmarks from FireFox. If you can't export from IE you may be able to import from EI to FireFox first.
In FireFox, menu BookMarks>Organize Bookmarks, then in the pane which opens, menu File>Export (that's how it works on Linux so Windows should be broadly similar). The result should be an html file.
You may be able to import this into Safari on your Mac; certainly you should be able to import it into FireFox and perhaps from there to Safari if necessary. -
H E L P mac math foonths to windows-compatible fonts
im a novice when it comes to font development. i want to convert mac math fonts to pc-compatible fonts. ive been trying to follow the guidelines on how to do it but i cant seem to have an output. dont know how python works and i dont know if my files are correct. i have "PalatBol, PalatBolIta, Palatino, PalatIta and PalatRom" and some other mac math fonts. so how do i put it in features file, etc. and what is "an outline font" mentioned in the overview? i dont see also the window wen i double-click on the makeotf.py (regarding makeotf.py, mentioned and shown on page 2 of the documentation).
pls help me as i have a deadline to meet.
im pc-based by the way. thank you very much.If you simply want to convert existing fonts to an equivalent pc version, then the FDK is the wrong tool. OpenType fonts have a lot of new meta-data that older formats do not have, and you will have to spend quite a bit time researching and making choices about how to build the new data. These areas are:
- extended set of menu names and other text info
- Unicode encoding tables
- OpenType layout features: these are very complex for math
- Panose number and other data for the OS/2 table
You best choice for the specific task of converting is the TypeTool products from FontLab ( see http://www.fontlab.com/html/typetool.html).
You may alo be able to make do with the free conversion tools at:
http://fondu.sourceforge.net/
These do not cover all the flavors of font data you might want, but if you can figure out how to use them and they cover the cases of interest to you, they will be sufficient.
I recommend the TypeTool , as it comes with a manual and requires relatively little computer and font expertise.
The specific problem you have with the FDK shows that the Python interpreter does not know where to find the FDK add-on modules. This means in turn that you need to run the FinishInstall.py. NOTE! You have to run this as described in the installation instructions: you must run it by dragging it onto the icon for the Python interpreter. If you run it by double-clicking on it, it will make incorrect file-paths. -
How to make the "@" on a Mac Book Pro when Windows XP is booted
How do I make a "@" on the Mac Book black when Windows XP is booted? Sinc Alt GR does not exist I tried several possibilities, but I did not have success.
Can anybody help me
Regards ChrisHi
you need to change the keyboard setup to English in your windows
hope this helps
Clinton -
How can I delete Mac files from my windows boot?
My OS is corrupt and I'm trying to reinstall Maverik, but ran out of space. Is there a way to delete Mac files from my Windows BootCamp?
windows require thirdparty software to write to mac filesystems
windows write to mac os extended -
Hello. I have a mac-mini (mid 2010) and with bootcamp, was successfully running XP.
I then decided to upgraded to Windows 7 had lots of trouble installing it on my existing bootcamp partition.
I finally was able to install Windows 7, by just booting off the CD and letting it install that way.
But reading more on it, I think I was supposed to use Bootcamp to do it for me...
I had thought the Bootcamp Assistant was for only fresh installs of a Windows O.S. where no partitiion existed previously.
I had a partition so thought Bootcamp wasn't required for my needs.
But now, inside Windows 7, I have 0 drivers installed. I have an AirPort Express, so on the Mac side, I downloaded
and installed the Windows version of AirPort Utility and copied it to my USB stick. Then
I exported my settings to a text file on a USB Stick, then on Windows was able to successfully install AirPort Utility and import the settings.
But it still doesn't find my network. I am pretty sure I'm broadcasting my SSID...
So I need to know the following:
1) How to know I'm broadcasting my SSID - where do I find this in settings?
2) How I can install my mac-mini drivers on Windows 7 so I can use my existing wireless network, now that I've gone through the installation without using Bootcamp?
3) Do I need to set up network adapters and all that stuff in Windows 7 first? If so, how and what drivers do I need?
One other thing I tried was downloading Bootccamp 4.x and installing that on Windows 7 to see if it gives me the drivers that were supposed to be written to my USB stick if I had installed Windows 7 using Bootcamp in the first place... However I think the message it said was that it couldn't install as it was the wrong version. So I'm still stuck without drivers and therefore no internet.
And that is my main task - getting the Internet up and running in Windows 7.
Other Info:
I'm running Mac OS X 10.6.8 with 2 GB of memory.
I installed the 32-bit version of Windows 7 and I don't know what version of Bootcamp I'm running...
I can tell you that BootCamp Assistant is v3.0.4, but don't know if that means Bootcamp is also 3.0.4.
Hope you can help.
Thanks.I tried something that worked for me...
Knowing that after my install of Windows 7 wasn't the correct method (didn't go through bootcamp), and the BootCamp 4.x package wouldn't install under windows 7, I tried reinstalling Bootcamp 4.x in Windows 7 to see what the exact message was it gave me. The message said it couldn't install because of a 32-bit O.S. vs a 64-bit version of the package.
So that got me thinging - my XP version was 32-bit, and so is my Windows 7 installation. So I tried installing the bootcamp that came with my Mac OS X installation CD. This is bootcamp version 3.1.
Not only did it install, but it practically took care of everything driver-wise for me. I was then able to see my wireless network, enter my password and I was connected. The only thing else I had to do to get on the Internet was bring IE8 online (guess it ships offline by default). Firewall and Antivirus are now installed, just a few more things to go.
That's one thing that's just not clear that I'll be sure to note for next time... The Bootcamp packages you download are actually driver packages for Windows. That is where the Windows drivers exists that are necessary to make your Windows 7 PC work on a bootcamp partition!
I didn't need the AirPoirt Utility at all (at least, I never went into it).
Thanks VikingOSX for your post. I will not need to follow the steps you provided, but they may help someone else as all of these bootcamp issues I've been reading seem to be very unique per installation.
Hopefully my solution helps others. -
This started for me 1/17/2011 on the savingsbank.com website:
Firefox (latest versions) on both Mac 10.6 and Windows 7 show "this Connection is Untrusted" on my bank site https://www.savingsbank.com
NO other browsers - Explorer, Chrome, Safari - give this error box on this site. Please advise if this has to do with the bank site? or Firefox compatibility.
Saw in a forum someone else having this problem and they were told it had to do with their Date and time being off?? I've been on several computers, all with the correct date and time and they've all shown this Insecure Certificate statement on my bank site with Firefox and no other browser.I've looked at the banking site with IE8 and it does NOT show me that "This connection is Untrusted" window. (please see attached screen shot of viewing the site with IE8) It opens fine and has "Identified by Network Solutions" showing on the address bar as it always does.
The latest version of Opera (not earlier ones) does show a problem with the website's security certificate.
We've contacted the bank about this, and they say there's no problem with their certificate but are looking into it.
My question remains, why only Firefox and one version of Opera claim this and NO other browser? -
My Ipod shuffle appears in itunes on mac but not on windows 7 even though we have the latest update of itunes. We have also tried the other solutions on the apple support site.
Hi reinkristine86!
I know you’ve said that you have tried other suggestions for troubleshooting this issue, so pardon me if you have already seen this article, but have you tried all of the troubleshooting steps listed in the article below?
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
How to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch
how to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch
There's not much sense in purchasing a Mac to run only Windows on it. Keep in mind that drivers for Windows are a secondary concern for Apple. While Windows will typicall run fine, things like power managment are not optimized under Windows (you'll get less time on battery while running Windows). You will also not be able to install firmware updates. Firmware updates might be necessary whether you run Windows or OS X as they are updates to the code in your hardware and are not OS-specific. You must be running OS X in order to install a firmware update. You can do this even if you boot off of an external drive with OS X installed on it. At the very least, you should keep just a small partition for OS X on your internal drive.
-
How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.
Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though. -
My ipod is formatted for my powerbook itunes the trouble is i have itunes also on a pc that has a different music library and iwant to be able to add the pc library to my ipod without having to re-format it to windows and loose all my data.I do not have access to my mac so iwill not be able to back my data up to the mac. Thanks
If your iPod is formatted for Mac it won't run natively on a PC because Windows operating systems don't recognize Mac OS-formatted disks (HFS or HFS Plus formats). There are third party programs that will allow you to use a Mac formatted iPod on Windows. XPlay for instance gets good reviews and has the added functionality to let you copy your songs back to iTunes. Once you have your songs saved to the PC you can go ahead and restore the iPod for Windows. You can purchase XPlay at this link: XPlay 3
-
Cannot access Mac OS Partition from windows 8 running in boot camp
So I installed Windows 8.1 Pro through Boot Camp but I can't access the Mac OS partition from windows even though boot camp partition shows up while I'm on Mac OS. I have installed all the drivers from apple but still it didn't work. Then I downloaded Paragon HFS+ which was free for windows 8 and 8.1 thinking that this would solve my problem. The instructions told me to change the drive letter for mac partition from disk management by right clicking the drive pressing "change drive letter and path" button. But the "change drive letter and path" key in grey color and I can't press it. Can somebody please help?
Here you go
1) diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *750.2 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 650.3 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
4: Microsoft Basic Data BOOTCAMP 99.0 GB disk0s4
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *645.8 GB disk1
Logical Volume on disk0s2
AFC82671-CBAA-4338-BAEC-7D272EC755B1
Unencrypted
2. sudo fdisk /dev/<BootCampDisk> (from 1 of the form disk0)
i typed this: sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 91201/255/63 [1465149168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AC 1023 254 63 - 1023 254 63 [ 409640 - 1270110576] <Unknown ID>
3: AB 1023 254 63 - 1023 254 63 [1270520216 - 1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [1271791616 - 193355776] HPFS/QNX/AUX
sudo fdisk /dev/disk1
/dev/disk1: Resource busy
3. sudo gpt -vv -r show /dev/<BootCampDisk> (from 1 of the form disk0)
sudo gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=750156374016; sectorsize=512; blocks=1465149168
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1465149167
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 1270110576 2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1270520216 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1271789752 1864
1271791616 193355776 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1465147392 1743
1465149135 32 Sec GPT table
1465149167 1 Sec GPT header
I didn't quite understand the 4th step. Sorry
Maybe you are looking for
-
What do I need to make a PDF of an email in Outlook 2003
What do I need to make a PDF of an email in Outlook 2003
-
Connecting old Fire wire 400 External Drive with no FW 800 ports, how?
I have a fire wire 400 drive and so i switched to mac pro which doesn't have 400 things. so i can't connect it. ANyway to do it?
-
RD into Windows 8.1 occasionally starts failing
Please help I'm stumped.... I have a Windows 8.1 stand-alone machine, which is not attached to any domain controller. After a period of days or weeks, it seems I can no longer remote desktop into this machine.. until it has been rebooted. I seem to
-
TESTING A PROCEDURE, How to display the result????
my procedure is correct, my test statement processed but I want it to display the desc like 'Cancelled';, or no status available How????? ---below is my procedure-- CREATE OR REPLACE PROCEDURE status_sp (p_basket IN bb_basket.idbasket%TYPE, p_date OU
-
Can you use HTML signature in webmail/SquirrelMail?
I tried to paste my HTML signature from Apple Mail into my account settings while logged into my server's webmail/SquirrelMail and it looks like it got converted to plain text immediately. Is it possible for my webmail users to have HTML signatures?