Converting to MP4 from FCP 7, jerky at times.

I am trying to create a HD MP4 file less than 4GB, to play my 6 min HD movie on PS3. I can not have file larger than 4GB as FAT32 will not allow it.
1. What is the max bit rate should I use? I used 9,000 kb/sec
2. I noticed jerky motion at times, its not smooth as in FCP playback.
Would switch to mac pro from iMac solve the problem?
Thanks,

Bitrate calculator: http://www.dr-lex.be/info-stuff/videocalc.html
>Would switch to mac pro from iMac solve the problem?
No. The Pro might be faster, depending on the capabilities and spec of the two Macs but it won't make any difference to the quality.

Similar Messages

Panasonic Frame Rate Converter available apart from FCP 6?

The FCP 6 New Features pdf reads:
"The DVCPRO HD Frame Rate Converter is now installed with Final Cut Pro. Both 720p60 and 720p50 footage can now be converted."
Is this still a plugin, and is it available somewhere for older versions of FCP? The download on the Panasonic site is still the older version that doesn't handle 50fps.

My thought is that it is available only as part of the FCP6 package and works internally with that.
If you are asking if it is available for earlier versions, the answer in all probability is no.

First time linking from FCP. Question regarding normalizing.

Hello,
I am linking from FCP for the first time. I would like to normalize a number of clips of dialogue. I can do it clip by clip, but when I select a series of clips at the same time, the Normalize feature is grayed (inaccessible). Is there a way to normalize multiple clips at the same time?
Thanks.
DG

Even if you could normalize all the clips at once, I don't think you would want to. If they could all be normalized together, you would be normalizing based on the highest peak on one of the audio clips, which would raise or lower all of the audio levels inconsistently. That is unless all of the audio is near identical.

Why is MP4 (MPEG4) Compression direct from FCP (vs from DVD) lower quality?

I am creating video podcasts and I have been fighting this issue for a couple weeks.
When I compress using mpeg4 directly from QuickTime I get unacceptable pixilation surrounding the subjects but when compress the same file from DVD using handbrake or iSquint it looks just fine. I am using the same settings.
Creating a DVD for each compression is silly work around. Does anybody have any advice here?
Note: when I compress using h.264 from FCP it looks fine, however I have decided against the h.264 codec at this time due to the processing toll it puts on the end user that can cause jumpy playback.
Power Book G4 Mac OS X (10.3.9) FCP 4.5

I would rather use mp4 than h.264 and I have seen videos (eg. tikibartv) that look great with the mp4 codec.
Does anybody have any advice here?
I take it you've tried a workflow which emulates the site you referenced, such as...
File > Export > Using QuickTime Conversion
In the Format drop-down, select MPEG-4
Click on the Options... button and...
Alter Image Size to 320x240.
Change the Data Rate to 500
Set Frame Rate to 15
Alter the Key Frame property to 75
Click OK
After you've selected the right destination folder, go ahead and press Save.
This will produce a .mp4 file. If you want to make this a .mov file, change the extension in the Browser.
...and that hasn't given you the results you're looking for?

.mov file from FCP, what's the next step to convert it to play on a dvd?

I have a project save to a .mov file from FCP and it looks great. It was shot in 720 HD but my dvd won't play .mov files.
I'd like to either convert it to an .avi or mpeg file now but after trying a few times through QT Pro and even Mpeg Streamclip, the footage is either pixelated or is too choppy to play on my dvd (Samsung HT5500).
What are the best settings to convert a HD .mov file to play on a dvd so it looks great. What software should I use for this... QT Pro or Mpeg Streamclip?
TIA,
Dale

DVD Studio Pro.
And you can't make a DVD that is HD; DVDs are standard definition. You can make Blu-ray discs with a Blu-ray burner and Blu-ray player, but you DVDs will only be 720x480.
Convert in Compressor with a preset for DVD, and import that into DVD Studio Pro.

Exporting Widescreen from FCP to mp4...help!

Help! I'm trying to export a 720x480 video from FCP, to upload onto youtube. I feel this should be easy, but no matter what codec i use, the exported video looks stretched. I want the video to stay widescreen, can have black bars at top and bottom, as long as aspect ratio is kept.
What am i doing wrong??

You mean 720x480 Anamorphic, yes?
Here's what I do...
File - Export - QT Conversion
BROADBAND HIGH
Then, click OPTIONS and change size to 420x270.
That will force 'widescreen' no letterbox.
Then, I load that to youtube directly and IT takes care of the letterboxing.
Good luck,
CaptM

Subclip Madness - Convert from FCP

So as it says in the title, I have made the switch from FCP to Premier, like many others. Overall I am pretty happy as the findamentals seem to be the same, also I am getting deeper into AFX so
the inergration is definitely nice. However I have started my first full on project with Premier and the way I usually edit is:
1] Import footage, I usually have atleast 500 - 1400 clips, I shoot using a DSLR.
2] I organize all my clips into relevant bins.
3] I then make subclips out of each main clip - removing excess footage I dont need or stuff that I think isnt good enough leaving me with the best possible video content for me to pick and choose from while I edit.
4] Build my timeline etc etc etc
You get the point.
Now the first issue I am very concerned about which has already been mentioned in the forum is the lack of a "remove subclip limits" option in Premiere. What this does in FCP, is basically if I for some reason need to extend
or resize my subclip, I can "remove its limits" and then go ahead in doing so, I did this a lot, it was very helpful.
In Premier this is not present, anyone from FCP with a similar workflow run into this issue? Perhaps you have come up with some kind of workaround or something, if so please share.
Now my second grievence, basically everytime I create a subclip, instead of just appearing below the main clip, it appears as the last clip in the bin, so I have to scroll all the way back up and relocate the main clip in order to see
if the subclip was alright or if I want to make more subclips.
Sometimes the clip will appear outside any of the bins just by itself and I have to hunt it down, this is really frustrating and this alone is making me actually look at video reviews of FCP X even though I know I will probably never use it.
I have tried changing the ay the window with all the media is arranged, by name, label whatever, this keeps happening.
Help, before I throw a large object at my monitor.
Thanks in advance.

Scene detection is not really going to work for me because I film music concerts. When I am shooting the live performances, I shoot several clips from several angles for a 4 hour show.
I then end up with 100's of clips for a show, the scene detection would work if I had one long piece of video or a tape.
Also @shooternz
I figured that out, however it is extremely buggy. When I do indeed change the media start time, I can extend the size of the clip, however if I for some reason delete the clip and then drag the subclip back to the timeline I cannot then resize it, and if I try to change the media start times again, it shows the previously altered start time and then doesnt affect the subclip on the timeline at all regardless of the star or end points.
Also when I do create a subclip, it goes to the bottom of the bin, regardless of the sorting, may it be by column or whatever, this is immensely frustrating as I have to keep scrolling all over the place.
Also one really annoying thing about premiere is the fact that if I want to preview something, like a clip/subclip/audio file, I have to click the tiny little icon/thumbnail on the left hand side of its name or title, I often miss the little icon becuase I edit quickly and clicking anywhere else will open up the dialog box for importing footage, this again is a real peeve.
Dont get me wrong, I want to like Premiere but the deeper I am getting into this project the more I am finding tiny issues with Premiere pop up.

Macbook converting GoPro videos from MP4 to .Mov

I have been recording in 4K with my GoPro camera, and my macbook would play the MP4 files no problem. I recently changed the resolution to 2.7K and now my Macbook will convert the (MP4) file to a (.mov) file before I'm able to play it. Does anyone know why?

I have been recording in 4K with my GoPro camera, and my macbook would play the MP4 files no problem. I recently changed the resolution to 2.7K and now my Macbook will convert the (MP4) file to a (.mov) file before I'm able to play it. Does anyone know why?

Sony EX XDCAM from FCP MAC cannot be recognized by PC

Not sure if this is a quick fix, but my CGI guy - who works by remote - cannot get his PC to recognize my XDCAM EX 108024p clips from my MAC - which I have exported as MXFs using the SONY XDCAM export option in Export>using qt conversion. I sent him the link to the driver, and he said it installed fine - but still his computer was not recognizing the MXF file. Does he need a program to convert?
Basically, I am looking for a lossless way to give him my Sony EX1 files that he can work with on his PC (in studio max) and then export to a lossless format that I don't have to render in FCP.
Any tips or suggestions most welcome. This is my first time editing a program with EX 1 files in FCP.

I'm using the Sony XDCAM transfer 2.5.1 to bring in the clips from card into FCP. The clip browser I downloaded yesterday and I tried to get it to recognize an MXF file that I had exported from FCP using the sony xdcam plug-in (but it did not). I guess I can only use the MP4s to convert to MXF? Is there a difference going from FCP compared to Clip Browser? I want to be able to export cut sequences so that the CGI guy can composite...
Message was edited by: thecuz

What is the best compressor setting to use ... when exporting a 720p timeline from FCP for a project that will only be played back in a standard def monitor?

What is the best compressor setting to use for DVD StudioPro ... when exporting a 720p 30 timeline from FCP for a project that will only be viewed in a standard def monitor?

Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
Is there an easier way?

Export From FCP to Compressor adds a Frame to Clip

When I export a sequence from FCP 5.04 all my chapter points are off 1 frame in Compressor 2.01. For some reason it seems to be adding a black frame at the front of the sequence pushing the sequence down the timeline and off setting all the chapter points. It is happening to other sequences as well, it's not project or sequence specific.
This is Weird. I think it started 2 weeks ago. It might be related to the 7.1 Quicktime upgrade. I just upgraded to 7.1.1 to see if it would solve this issue however no luck.
Any ideas, any body else having this problem?
Guillaume

I have exactly the same problem : Compressor adds a white picture for some clips when I'm converting to MP4.
How can I solve this problem?
Thanks in advance.
Sand

I just installed the latest iMovie 10.0.2. Please don't say "look at the help menu" - it doesn't help. This is radically different than the version I'd been using. For starters it automatically converts to mp4 rather than .mov - that's my 1st question

Sorry for the long headline - I'm new to the support community and thought that was the post! I've been happily using my old version of iMovie - I don't even know the number - I guess it was 11? I just installed the most recent 10.0.2 and it is radically different from what I've been using. For starters, whereas my uploaded video used to be in the lower section, and I would edit up above, now it's reversed. Whereas I used to click on the transitions and drag a blur or whatever to my movie right while I was editing, now it's on a different screen. And the easy old Export file button is gone, where you could choose setting, file size, export as Quicktime movie - all gone - now it converts to mp4 and I STILL can't figure out how to get it back to .mov
Please don't say "read the Help manual" - I tried - there's nothing there about any of this. And by the way, I'm not a techie - I taught myself what I needed to know about the old iMovie and am now lost so please no snarks. I would appreciate any help.

Select in browser your movie, click Export on toolbar, choose iTunes, QT etc. then choose size of your file in opening window. And then click Export in this window.

Exporting from FCP to DVD

Hey
Just wondering if I can get some advise. I need to export my project from final cut pro to DVD but just wondering what the best way to do this would be to get the best quality DVD. (This is for a company to take out to potential clients to sell what the company does - so it needs to look good!)
My project is no longer than 5 mins
1920 x 1080 - 1080i (16:9)
Field Dominance: None
frame rate 25
I have Final Cut Studio latest version.
I'm trying out a few options at the moment using compressor - best quality - so we'll see what these look like, but I'm not sure what all the settings should be set at.
Any advise on what you think will be best would be great.
Thanks

Wouldn't use Quicktime conversion - no need. Just export from FCP as Quicktime Movie at current settings.
In my experience, changing the field dominance from interlaced to progressive can cause stuttering particularly in motion graphics - this might not be an issue if you're laying to tape for broadcast but when you convert back to interlaced for SD DVD it can look very ugly.
In any case, at the very least, you need to be using a Kona card or IOHD to do this type of conversion properly - and really, if you want progressive you should shoot progressive.
Message was edited by: Dynamicworm
Message was edited by: Dynamicworm

Exporting text from fcp

I have a lot of separate text boxes in my sequence. Since I can' t do a spell check in fcp, I was wondering if i can export all the text boxes out as a plain text document to do a spell check.
I tried exporting as a xml document, but navigating through all the tags was quite a problem.
TIA for any suggestions.

Usual workflow is following.
1. Put all Text-generator clips to one track
2. Export sequence to XML
3. Launch TitleExchange, point to exported XML and say where to put converted file.
Exporting to STL you'll get text file like that
+00:01:27:26 ,00:01:29:26 ,They had this idea that+
+00:01:29:30 ,00:01:30:31 ,behind scary+
... which you can open in any spell-checker.
We use TitleExchange to bring subtitles from FCP to DVD Studio and back (in case we need subtitled DVD and Betacam output)
Though, this may be much expensive way of checking spelling (135 Euro per TE licence).
There are lots of subtitle software, I only wanted to mention a way of exporting text from FCP with help of subtitle processors.

Exporting image from FCP 16.9

i am exporting still images from FCP and they are sqooshed , they look more like 4.3 aspect ratio. i know I converted them to 16.9 on the desktop with preview, but i can't reproduce that...any ideas, I don't want to get graphic converter, it's just a few shots.
CB

Open them in QT Player 7 then select Window>Show Movie Properties>Video Track.
Change Scaled Size to the correct figures, deselect Preserve Aspect Ratio and hit return.

Converting to MP4 from FCP 7, jerky at times.

Similar Messages

Maybe you are looking for