CONVT_CODEPAGE error in DATASET Statement

Hi All,
I have used the statement in my custom program scheduled as background
OPEN DATASET strtemp FOR INPUT ENCODING DEFAULT IN TEXT MODE.
It resulted in the cancellation of the job
The rror is ABAP/4 processor: CONVT_CODEPAGE
Detailed error description:
Runtime Errors         CONVT_CODEPAGE
Except.                CX_SY_CONVERSION_CODEPAGE
Date and Time          11.11.2010 18:05:18
Short text
     A character set conversion is not possible.
What happened?
     At the conversion of a text from codepage '4110' to codepage '4103':
     - a character was found that cannot be displayed in one of the two
     codepages;
     - or it was detected that this conversion is not supported
     The running ABAP program 'ZJSHE000' had to be terminated as the conversion
     would have produced incorrect data.
     The number of characters that could not be displayed (and therefore not
     be converted), is 7. If this number is 0, the second error case, as
     mentioned above, has occurred.
Please help to resolve the issue. The file comes from an EDI system and places in App server.
The SAP system is unicode enabled.Why this error and how can we reolve this.
Regards.

maybe you should use other parameter when doing the open dataset
instead of OPEN DATASET filename FOR INPUT IN TEXT MODE ENCODING DEFAULT.
try:
OPEN DATASET filename FOR INPUT
IN legacy TEXT MODE
code page codepage.
have you searched OSS with the keywords supplied in the note?

Similar Messages

Error with OPEN DATASET Statement

Hi All,
I have a an executable program which downloads data into applcation server using OPEN DATASET statement.
Following is my code:
OPEN DATASET w_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    IF sy-subrc      NE 0
     MESSAGE e111 WITH text-003.
     ENDIF.
Text 003 is 'Error Opening File'.
sy-subrc becomes non-zero if file cannot be opened for writing.
Daily I am running this program in a background job. I am getting this error on and off. Some times I am able to create the file in application server and sometimes this error comes up by cancelling the job. The message shown for the cancelled job along with text-003 is 'Job cancelled after system exception ERROR_MESSAGE'. This has no dump analysis.
Even When I run this program online I am facing the same issue.
Some users never faced this issue while others have this problem. I think it is not an authorization problem as I am able to create flat file in application server most of the times.
Can you please suggest what could have went wrong?
And kindly propse me a solution.
Thanks & Regards,
Paddu.

Hi Paddu,
I am not sure exactly but i would go as far as saying that the reason you may be having that error is because your server has a limited amount of space and that your program is not working due to that limitation.
Is that file that you have created being picked up by another application. If so then i would advise you to check the limitation of the server size.
Also, is your file name different all the time? if u r trying to write an already existing file name it will give u an error.
Edited by: Kevin Ck on Mar 9, 2009 10:19 AM

Error in SQL Statement: SAPSQL_INVALID_TABLENAME

Hello all,
While displaying contents of infocube i am getting strange error ..
Error in SQL Statement: SAPSQL_INVALID_TABLENAME ABC
Message no. DBMAN256
( Table name length is 16 )
I am able to see the contents of Fact table.
Could not found any solution till now.. Any lights , views will be very much helpful.
Regards
Nimesh

hi Nimesh,
check oss note 835816
Symptom
When you execute a query, a data-mart, SEM, APO or similar access, an SQL error 4004 occurs "Unknown table name" Open SQL: Short dump with UNCAUGHT_EXCEPTION CX_RSR_X_MESSAGE in the ABAP Call Stack, you find the RSDRC_BASIC_DB_QUERY_DATA_GET function module.
Prior to this, relatively large datasets (more than 10%) were deleted from the InfoCube.
Other terms
Business Information Warehouse, Factview, DBMAN256, DBMAN
256, SAPLRSDRS, DELETE, DELETE_FACTS, RSDRD_DELETE_FACTS
Reason and Prerequisites
During the purge, the fact tables are rebuilt again as of a certain percentage, for performance reasons. The factview is then not created again.
Solution
Views that are already missing can be compiled again with the SAP_FACTVIEWS_RECREATE report.
The correction prevents the problem reappearing.
BW 3.0B
           Import Support Package 27 for 3.0B (BW3.0B Patch27 or SAPKW30B27) into your BW system. The Support Package is available whennote 0723258 with the short text "SAPBWNews BW3.0B Support Package 27", which describes this Support Package in more detail, is released for customers.
BW 3.10 Content
           Import Support Package 21 for 3.10 (BW3.10 Patch21 or SAPKW31021) into your BW system. The Support Package is available whennote 0723263 with the short text "SAPBWNews BW3.1 Content Support Package 21", which describes this Support Package in more detail, is released for customers.
BW 3.50
           Import Support Package 13 for 3.5 (BW3.50 Patch13 or SAPKW35013) into your BW system. The Support Package is available when note 0765114 with the short text "SAPBWNews BW Support Package 13 NetWeaver'04 Stack 13", which describes this Support Package in more detail, is released for customers.
In urgent cases you can use the correction instructions.
These notes may already be available before the Support Package is released, to make information available in advance. However, the short text then still contains the words "preliminary version".

Open dataset statement in different SAP versions

Hi ,
I have to write a program which is for extracting data from application server. I have to run this program on different sap versions like, 4.6b, 4.6c, 4.7, 5.0 . I am using 'OPEN DATASET' statement in my program. But the problem is, in versions below 4.6c, this statement is written as "OPEN DATASET filename FOR READING IN TEXT MODE".
And in versions above 4.7 it is written as "OPEN DATASET filename FOR READING IN TEXT MODE DEFAULT ENCODING".
So when this statement will be executed in versions below 4.6c, it will give syntax errors.
Can you let me know how to solve this problem.
Thanks.

Hi,
differ btw. syst-SAPRL
-> if you get syntax-error create a subroutine-pool
with abap command generate subroutine...
A.

Question re ENCODING cp option of OPEN DATASET statement

I'm working on a 6.0 system with 4.6 data that I've downloaded from the 4.6 system and uploaded to the 6.0 system.
The 4.6 data has "umlauts" in it (like when "o's" have two dots above them in Scandinavian names), and when my READ DATASET executes on the 6.0 server, my try block is catching a CX_SY_CONVERSION_CODEPAGE error.
I'm assuming that to solve this, I will need to specify the codepage of the 4.6 server in the ENCODING codepage option of the OPEN DATASET statement that's exceuting on the 6.0 server.
Will this solve the problem? If not, what do I try next ?
Also, how can I determine the system codpage of my current ABAP "text environment"? I know all the possibilities are in table TCP0P, but how do I know which one is "active" ???
Thanks guys.

Hi,
Refer this OPEN DATASET in ECC6.0 solves your problem and also check the abap documentation for system codepage and text environment.
For unicode systems,system code page is UTF-16.
Thanks.
Ramya.

Javac(1.4.2) gives error in import statement

Hi All,
I am facing a surprising problem. I have 2 java class files. I write the import statement for second one in the first one. There is no package & these are in the same directory. I have compiled the second one. But when I try to compile the First one. Javac throws error at import statement like below :
D:\Clubs\oct\6>javac -d . ManojTest.java
ManojTest.java:1: '.' expected
import SessionBean;
^
1 error
My Java Files are as below :
import SessionBean;
public class ManojTest
public static void main(String args[])
//ManojTest.java
public class SessionBean
public static void main(String args[])
//SessionBean.java
I have compiled SessionBean.java successfully but when I try to compile ManojTest.java I get error mentioned above.
However this probelm comes when I use j2se 1.4.2.. but works in j2se 1.3.1..
Another way could be I use package structure.
But I can't do any of these, as I have to port my big project to j2se1.4.2.. from j2se1.3.1.. (Live project is running on Tomcat).
Problems is similar in Unix & Windows both.
Is this javac compiler issue or there is some setting which I can make.
I have already included . (dot) in PATH & CLASSPATH environment varibales.
Please help me out if there is any way around this, as i am stuck up in between
thank you
Manoj :confused:

Use a package and then add that package in your classpathOr don't use a package, leave the file in the default (noname) package, and don't use the import statement. Java will find it in the default package without the import.
Explicit import statements from the default package are no longer allowed

Getting error message that states itunesexe has been set to run in compatibilty mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it .How do i turn off compatibility mode?

recieved error message that states" itunes exe has been set to run in compatibility mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it. How do i access compatibility mode and turn it off ? Believe i have Windows 7.

Try the following document, only be sure that none of the boxes in the compatibility tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

When my lightroom opens up I keep getting an error message that states, "Lightroom encountered an error whne reading from its preview cache and needs to quit" I have relaunched it a number of times and keep getting the same message.

when my lightroom opens up I keep getting an error message that states, "Lightroom encountered an error whne reading from its preview cache and needs to quit" I have relaunched it a number of times and keep getting the same message. Any thoughts on how to fix this?

You need to delete your preview cache and have Lightroom rebuild it. Cache location can be found here.
https://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
Why And How To Clear Your Lightroom Cache - Lightroom Fanatic

Error in if statement

i am writing a stored procedure in which i have made use of if statement my requirement is that in the if statement if a
certain record exists then go inside the if condition otherwise else condition i am getting error
my SQL Statement is this
create or replace
PROCEDURE usp_addAppointment_Mst
parameter list
AS
pAppdetailsid number(10,0);
v_Appcode varchar(10);
begin
     if exists(Select * from dr_slots Where SlotId = pSlotId and MaximumPatient = AllocatedPatient )then
Select v_AppDetailsId from dual;
     return ; -- this is my return statement
else
Select NVL(max(AppId),0) + 1 into v_Appid From Appointment_Mst;
v_Appcode := 'APP' || cast(*v_Appid* as varchar(5)); -error in this line
/*some code*/
     Select AppDetailsId from Appointment_Dtls where AppDetailsId=pAppdetailsid;
end if;
end;
what i am doing is that if statement mentioned above becomes TRUE then execute select statement and return
from there otherwise it goes inside else statement and perform some operation which is there inside the transaction
and then select some value which actually the last statement in else block this is my actual requirement
while executing i am getting this error
Error(71,58): PLS-00103: Encountered the symbol "(" when expecting one of the following:     . ) @ %
Edited by: user21354 on Feb 21, 2011 1:05 AM
Edited by: user21354 on Feb 21, 2011 1:08 AM

What is this line doing in there?
variable declaration That's not valid PL/SQL code.
Please also consider posting your code using {noformat}{noformat} tags as desribed in the SQL and PL/SQL FAQ: SQL and PL/SQL FAQ

I just downloaded itunes onto my new laptop and I am trying to burn songs onto a cd that I had purchased previously and I am getting an error message that states I must authorize this computer. What does that mean?

I just downloaded itunes onto my new laptop and I am trying to burn songs onto a cd that I had purchased previously and I am getting an error message that states I must authorize this computer. What does that mean?

If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(95452)

Error while saving state in 'client' , in ADF faces application

Thank you for reading my post
I have an ADF faces application and i get this error and my application does not function correctly , does any one has an idea ?
thanks
06/10/17 17:34:38.15 10.1.3.1.0 Started
06/10/17 17:34:55.546 web2: 10.1.3.1.0 Started
06/10/17 17:45:49.531 web2: Servlet error
java.lang.NullPointerException
     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:130)
     at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
     at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:619)
06/10/17 17:46:02.703 web2: Servlet error
javax.servlet.jsp.JspException: Error while saving state in 'client': 'An established connection was aborted by the software in your host machine'.
     at com.sun.faces.taglib.jsf_core.ViewTag.doAfterBody(ViewTag.java:206)
     at _index._jspService(_index.java:473)
     at com.orionserver[Oracle Containers for J2EE 10g (10.1.3.1.0) ].http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:287)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:50)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:130)
     at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
     at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:167)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:619)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:619)

StateManagerImpl.saveSerializedView tries to let UIViewRoot be a session
attribute and the error message says it should be serializable; certainly it' not.
I think HttpSession.setAttribute does not claim the object should be serializable.
I don't know why apache's StandardSession.setAttribute claims so.

Error when executing statement for table/stored proc

Hi All,
 I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
 In my stored procedure I have three insert statements to insert rows in to 3 tables.
 This stored procedure is working fine for two insert statements i.e,
 For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
 when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
 Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
 Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
Murthy

Hi narasimha,
 This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati

Error coming up states " warning some of the videos in your iTunes library including video "Dora" were copied to the iPad "ellen's iPad " because they cannot be played on this

I purchased tv shows for my son over 4th of July weekend from iTunes on my iPad...he has been watching with no problem...yesterday I backed up my iPad and the videos were taken off while I was syncing it. Error coming up states " warning some of the videos in your iTunes library including video "Dora" were not copied to the iPad "ellen's iPad " because they cannot be played on this iPad was not copied because the video format is not supported by the iPad.....makes no sense since he watched the video on Friday on my iPad...I went into the properties of the video and under the summary tab states kind of video is mpeg-4video file...went into the folder on my pc and the file is listed as a m4v file...under the tab tv shows when my iPad is connected I have it checked to sync tv shows and to automatically include "all" episodes of "all shows" ....
I am using version 4.3.4 on my iPad and iTunes version 10.4 ...I even restored back to the original settings and still did not work....called apple twice yesterday and spoke to 2 different people and no one could help me.....I am able to load a movie from my pc to my iPad with no problem and the movie is a mpeg-4video file....totally clueless...

I kept having a similar problem - 3 out of the 10 videos I had on iTunes wouldn't sync. They were in the right format and I KNEW they worked on my iPod because I'd RECORDED them on my iPod. I finally figured out what to do! Go to the movies in your iTunes library. Click on one that does not sync. Click on "Advanced" at the top of iTunes and choose "Create iPod or iPhone version". Once that's finished, be sure you delete the old version so you don't keep getting the error (or have 2 copies of the same video) and sync. This should eliminate the problem. At least it did for me!

Error: FF805 Tax statement item missing for tax code

Hi all,
We are getting an error when releasing billing document to accounting in 4.7system.
Error: FF805 Tax statement item missing for tax code O0
No tax item exists for tax code O0 in a G/L account item. A possible cause is an incorrect transfer of
parameters by the application to the Accounting interface.
Please give your inputs and will be rewared.
Quick reponse will be appreciated.
Thanks & Regards.

Dear Mehak,
I am sorry for the late reply, but I started (in fact) to work in SDN Forum this year, even I entered earlier.
We have many FF805 errors reported by customers and the same solution has resolved the problem. Please note that the SD-FI interface changed from earlier releases. The note 400766 eplxains the checks made.
So it is possible that now you get error message FF805, when in an earlier release you didn't get it, eventhough no customizing change.
Please review note -> 392696   R/3 Tax Interface Configuration Guide
However please note => In the vast majority of cases, error FF805 occurs because of an error in your pricing procedure. The attached note 112609 explains in detail how tax codes are transfered to conditions.
The note 400766 explains the checks performed by the system on the Tax codes:
1. system checks whether there is a revenue line for each tax line.
2. in the reverse case, for each revenue line containing a certain tax indicator there must be a tax line with this indicator.
If the tax condition has condition value zero and condition base value zero, then it is not transferred to FI.
If you have revenue lines containing a tax indicator XX, but no tax line with tax indicator XX, then the error FF805 issues, and it is justified. => Please check these informations.
-> EXAMPLE
   If tax condition MWST has base amount zero and value zero; for this reason it is not passed to accounting. But, according to the criteria reported by note 112609, its tax indicator EG: A7
   has been assigned to the condition EG: ZBR1.
   So in accounting there would be a revenue line with tax indicator A7, but there isn't any tax line with indicator A7 (because MWST doesn't pass to FI). The note 400766 states situation is unallowed, and error FF805 is justified.
IMPORTANT: Just a hint, any issue with FI, kindly report in the forum:
Expert Forums - SAP Solutions - ERP Financials
There you will find a lot of people that works with FI and can help you with future issues, including me
I hope I could help you
Kind Regards,
Vanessa Barth.

Error: FF805 Tax statement item missing for tax code O0

Hi Gurus
We are working in Upgrade Project 4.6C to ECC 6
We are getting an error when releasing billing document to accounting in ECC 6 System.
    Error: FF805 Tax statement item missing for tax code O0
    No tax item exists for tax code O0 in a G/L account item. A possible cause is an incorrect transfer of
    parameters by the application to the Accounting interface.
This issue occurs in both DEV and QA2.
Please give your iputs and will be rewared
Thanks and Regards,
Sateesh.K

hi,
The problem may be due to missing authorizations.
Please looking into the note 780589 and 188200.
Hope this might be of some help.
Regards,
Imran

CONVT_CODEPAGE error in DATASET Statement

Similar Messages

Maybe you are looking for