COOIS Capacity report for Collective Order

Hello Expert,
Need your help & assistance. I have an issue related to collective order, COOIS report display for list Capacity.
For one collective order, when I check this COOIS>Capacity report it display only header order detail, not for dependent order.
But for another collective order for same order type & Plant, it display for both header & dependent order.
Please find the attached word doc with screenshot for the steps I am following. Please point out the reason, that I can check so that for first order also it displays both header & dependent orders in the COOIS > Capacity list.

Case:01: Wherin COOIS>Capacity list display only show for header order not dependent order
Case 02:Wherin COOIS>Capacity list display show both for header order & dependent order
Order type & Plant is same in both cases.
For detail please check .xml attached
Regards
Piyush

Similar Messages

Report for open order and shipped qty summary

Dear Folks,
           Can any one please help me.
Report for open order summary Vs shipped quantity
what are the related programs to it.
throw some light on it.

>
arpita b wrote:
> Dear rohit
>
>     Iam asking about any report which compares or give details of open order vs shipped qty.
>
> Any sis report is available for this?
Hi Arpita,
There is no such sis report available. You will have to configure and create two seperate reports and do the comparison.
If you want, I will send you the list of all T.codes used to generate reports in SD.
Revert back to me if you need the same.
Regards,
Swapna D.

How to create a daily report for sales order

hi
how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

Hi
You have to use the sales order tables VBAK,VBAP and VBEP
So keep date field on selection screen
and treat this date as Order creation data audat field in VBAK.
based on this fetch the data from VBAK and VBAP with the following fields like
VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS etc and display in the report
<b>Reward points for useful Answers</b>
Regards
Anji

Interactive Report for Pending Order

Hi Gurus,
Iam new to ABAP.
I have Requirement to display the Interactive Report for Pending Order Status Report which displays pending of purchase orders for material wise and Vendor wise .Using ALV. Can Any one help ...me which table data i need to read and what are the field required.
Thanks in advance.

Hi G K,
For pending order : VA05 (select open sales orders).
cheers,
Hema.

Report for internal order - year/period comparison

I want to create a report for internal orders with year/period (from/to) comparison.
For the present year/period i'm using CCA variables 1YRPERF (Fiscal Year/Period From) and 1YRPERT (Fiscal Year/Period To), created from field FISCPER, table RWCOOM.
Now i want to creat a column fot the n-1 period (example: if selected current period as 009.2013 to 008.2014 the n-1 period will be 009.2012 to 008.2013), any suggestion what can I do about this?
Regards
Carlos Aguiar

Hi Ajay
This is for higher education institution that have to report by fiscal year (01-12 months) and by academic year (09.year1 to 08.year2). I have two maps to do this but the challenge is to have a unique map that by dates could retreive both information.
I need a to have a column giving the total for example the Per/Yr 009.2012 to 008.2013 and other column with the Per/Yr -1.
I've tried your first option but doesen't work at all because don't work with a period like 009.2013 to 008.2014. Then i made some adjustments: first column was setted to Yr (variable: 6-GJAHV to 6-GJAHB) and Per (variables: 1NPERIV to 1NPERIB). The second column was setted with Yr (variable: 6-GJAH2 to 6-GJAH2) and Per (variables: 1NPERIV to 1NPERIB). Seems to work with a few tests!
Also i tried to creat new variables "1YRPERF" / "1YRPERT" to n-1, but had some problems with formula.
1YRPERF have a formula: '#S012-999' and 1YRPERT formula is: '#S012'.
To 1YRPERF-1 i've defined the formula '1YRPERF' -1, and for the Per to the formula '1YRPERT' -1, but seems to consider minus 1 period that the entry period. I've tried with -12 but didn't work too.
Thatk's for the help!
Regards, Carlos

Business scenario for collective orders

Hello folks,
Can somebody explain the business scenario associated with collective orders? why we need collective orders? what is the business requirement that calls for collective orders?
Regards,
Sravan Kumar

You may create several production orders from several planned orders, provided that the planned orders exist in the same plant and belong to the same MRP controller. This is called collective order conversion.
A collective order is a linking together of planned orders or production orders over several manufacturing levels.
Every production order has its own routing and order number.
When you are in the collective order structure, you can edit an individual order, a subtree, or the entire collective order.
Goods movements are not required for sub-assemblies. The material is passed on directly to the next
order up.
The special procurement key determines whether direct production is involved.
Since no goods movements are required for sub-assemblies, this means that you have less data to maintain. Goods movements are only required for the leading order and for components whose special procurement key does not stipulate that direct production should be used.
Changes to dates and quantities affect all related orders.
The actual costs of the production process are more realistic because they are not influenced by the
predefined price in the material master.
Master Data.
Special procurement key "52" on MRP 2 view
Individual Collective Flag MRP4 view
Bills of material and routings at each assembly level
Any structure possible

Report for Production orders with name of Customers

Dear Expert,
Kindly suggest to view the production orders with customer numbers for which the sales orders is created.
I tried in MB51 with layout settings but the customer number comes out be blank despite the sales order number is populated for an production order.
Kindly suggst a way or any report in the system to get the corresponding information of production order number and corresponding customer name mentioned in the sales order .
Thanks in advance for your help and inputs..
Best regards,
Nitish jain

Nitish,
MB51 is a Material Document list. Many production orders exist that have no entries in this report, so it would be an unlikely candidate to be a solution for your requirement..
The standard production order reporting tool is COOIS. The output for MTO orders can be configured to display Sales order and Item and Soldto.
Obviously, displaying even the customer order number in COOIS is impossible in a MTS scenario.
In addition, a user experienced in using SAP Query (SQVI or SQ01/SQ02/SQ03) could also create a production order report without having to know ABAP, by properly linking tables AFKO, AUFK, AFPO (production order data) with VBAK (sales order header data) to get customer number, and KNA1 to get customer name..
If you are not expert in SAP Query, I suggest you discuss this requirement with a local ABAPer.
If you are feeling like educating yourself in the wonders of SAP query, try this doc. Although old, SAP query hasn't changed very much since this document was written.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
Rgds,
DB49
Edited by: Dogboy49 on Apr 20, 2010 10:47 PM

I need help in Report for production orders for my customer.

Hi All
I have scenario where plant A needs the following report for Material XXX which has setting as Stock Trnasfer order from Plant B.
Need report withthe following details, Storage Unit number, Material No, Quantity, Planned Order Date in plant A, Date Produced in plant B, Date Received by Plant A.
Please tell me if there is any standard report to take the following details. Scenario is that the header material YYY in Plant A has one material XXX as BOM component. Now this material has setting as Stock transfer from Plant B. On creating a plan order for Header material it will create a Plan order in plant B for component XXX. The above said detail is required for component XXX in plant A.

Dear
Did you explore the report in CO46-Order Progress Report based on Sales Order /Material /Production Order
Or COOIS/COHV for your requirement.Here you can get the Planned Order Details and also Production Order Details .
Regards
JH
Edited by: Jiaul Haque on Sep 27, 2010 2:57 PM

Standard Vs Actual Cost report for Production Order

Hi Expert,
I have an requirement that i need report for Standard Cost (CK40N) and Actual cost (261 Movement) for multiple production order or Multiple Material.
Please suggest standard report if available or FS for creating Z Report.
Regards,
Pranav

Hi Pranav
There are Standard reports
Option 1
You can use Product Drilldown reports in KKO0
For this:-
a. Do settings in OKN0 - assign a Cost Comp Structure and Choose Material group = Product Group
b. Run KKRV to collect data and then use KKO0 reports
I have replied this in SCN many times.. You can search here. Just google as "SCN" "Ajay Maheshwari" "OKN0" and you can see some posts answered by me
Option 2
You can use Summarization Hierarchy KKBC_HOE
For this
a. Set up Summ Hierarchy in KKR0.
b. Run KKRC
c. Run KKBC_HOE report
Br Ajay M

Report for Maintenance orders-Plant Maintenance

Dear all,
I have some maintenance orders, in that i have done cost settlement for few orders through KO88.I want to take a list of settled and not settled maintenance orders.
Is there any standard SAP reports or any way to findout setlled /not settled orders.
Thanks in advance
Guna

Hi,
you can use the T code S_ALR_87013015 - List: Actual Debit/Credit in this you can specify the order group or use multiple selection for orders and excute you can find which order got settled and which order has balance. if it is helpful pls reward me with points
regards
satish

Report for Purchase Orders didnt reach target through ALE

Hi Experts,
we are sending Purchase Orders to Third party system using XI.
But some of the orders when we save its automatically system generating output medium is PRINT so these orders not going through ALE.
1)Can anyone please tell me why the system is generating PRINT instead of ALE distribution.
2) is there any report for how many purchase orders created for the day and how many of them gone through successfull using ALE distribution.
Answer will be rewarded.
Kiran

Hi
Have you configured the PO Output type/messages with the Medium as 'A'(ALE)
otherwise the system willd efualt take 1(print) as default medium.
Check the NAST table entries for that date created Output type of PO's
for all of them the Medium(NACHA) field should be A
then all will go through ALE
check them.
Regards
Anji

Report for purchase orders - like ME80FN

Hello,
is there a way to get a report of purchase orders which have been released for stock and for customer orders.
I tried ME80FN, but there is no column available such like account-assignment-category where I could separate the orders for stock from the customer ones.
Any ideas?
Thx a lot!
Cheers Wolf.

account assignment category is available in dynamic selection
So you can at least execute ME80FN per account assignment category, even the field itself is not shown in the final report.

Missing Parts report for Purchase Orders

Hey Gurus,
We are running the availability check for Purchase orders and the user group is wondering if there is a standard Missing Parts report in SAP similiar to transaction CO24 for Purchase Orders so that they can view all of the Purchase orders with missing parts.
As a side note, we are using subcontracting purchase orders.

didn't get a response.

Report for Sales orders with the consumed credit limit value

Dear Gurus,
In my company, the credit check is at sales order level. We want a report which shows up the credit value consumed from the credit master by Sales order.
Going into the details, Say Credit limt is setup for a customer at Credit master for 10000 $.
I want a report showing Sales order 59235 has consumed 500 $, Sales order 59277 has consumed 1500 $, Sales order 59333 has consumed 2500 $.
Is their a report in standard SAP for the above functionality. If not, any ideas of how to achieve it?
Thank you for your responses.
Regards,

Hi,
Try the following transaction codes
S_ALR_87012218
FDK43
F.31
But if you want to a report like what you explained in thread i think in standard not available we need to develop a customized one.
Regards

Report for sales order

I need to create a report for all sales order that have line items with a Material Tax Class '2' - One time exemption. Tax will require a report that identifies/displays all line items with Tax Classification = '2'.
Report layout specifics:
Bill-To
Ship-To
Order No.
Tax classification
Internal Item Notice Text.
For bill-to, ship-to, order no are all fields of structure KOMK, but I need to know which table it comes from so I retrieve the data by a select statement to display this. Can anyone guide me on this ? Thanks in advance !!!
Nimesh

I dont know where that tab is either. I will have to find out and let you know. For now I just left it out and I have written the following code - please let me know if this looks right according to the requirement.
REPORT ZMAT_TAX_REPORT .
TABLES: VBAK, VBPA, VBAP, MLAN, KOMK.
DATA: begin of jtab occurs 0,
        kunnr like vbak-kunnr,
        vbeln like vbak-vbeln,
        parvw like vbpa-parvw,
      end of jtab,
      wa_vbak like vbak occurs 0 with header line,
      wa_vbpa like vbpa occurs 0 with header line,
      wa_vbap like vbap occurs 0 with header line.
PARAMETERS: TAXM1 like MLAN-TAXM1 default '2'.
select single taxm1 from vbap into vbap-taxm1 where TAXM1 = MLAN-TAXM1.
if sy-subrc eq 0.
if vbap-taxm1 = '2'.
    select single * from vbak into wa_vbak
                    where kunnr = komk-kunre.
    select single * from vbpa into wa_vbpa
                    where parvw = komk-kunwe.
    select single * from vbap into wa_vbap
                    where taxm1 = mlan-taxm1.
    move wa_vbak-kunnr to jtab-kunnr.
    move wa_vbak-vbeln to jtab-vbeln.
    move wa_vbpa-parvw to jtab-parvw.
endif.
if sy-subrc eq 0.
    if not jtab[] is initial.
      write:/(95) sy-uline.
      format color col_heading intensified on.
      write:/1 sy-vline,
             2 'Bill-To',
             21 sy-vline,
             3 'Ship-To',
             21 sy-vline,
             4 'Order No.',
             21 sy-vline.
      write:/(95) sy-uline.
      loop at jtab.
        write:/1 sy-vline,
               2 jtab-kunnr,
               21 sy-vline,
               3 jtab-parvw,
               21 sy-vline,
               4 jtab-vbeln,
               21 sy-vline,
               95 sy-vline.
      endloop.
    endif.
endif.
endif.

COOIS Capacity report for Collective Order

Similar Messages

Maybe you are looking for