Cooling fan has a fast speed that comes on now and again. is this a problem

hi,
   I mac 21.5 late 2009. osx10.9 pro 3.6 GHz intel core 2 duo. mem 4GB 1067 MHz DDR3.
   in normal use cooling fan is inaudible. top of machine gets quite to the touch.
   on some occasions at start up the cooling fan fires up at turbo speed and is as noisy as an 8 inch desk fan.
   when in this state it does keep the machine really cool, which is the way i would prefer. anyone know why
   the fan should decide to run on turbo speed sometimes and not others.
   anyone can help i would be really grateful........Phil.

Hi p.growden,
Your iMac has fans in it that are meant to keep it cool when it is under load. You can read more about them in this article -
Learn about the fans in your Mac
http://support.apple.com/kb/HT4543
Thanks for using Apple Support Communities.
Best,
Brett L

Similar Messages

The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook in Exchange 2010.

Hi,
We have 2 Exchange 2010 servers with multiple roles installed ,also we have setup cas array on the same with help of Kemp load balancer. Both have 1 public folder on each node.
There are few accounts(including mine) those are recently migrated from Exchange 2003 to Exchange 2010 and they are getting intermittantly an error pop "The Microsoft Exchange administrator has made a change that requires you quit and restart
Outlook"
this generally happens when i switch the network for my laptop but not every time 2-3 times in a week.
i already gone through this link but didn't get any solution. Any help is appreciated.
http://blogs.technet.com/b/aljackie/archive/2013/11/14/outlook-rpc-end-point-and-pf-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and-restart-outlook.aspx
Amit Rawat | MCITP - Exchange 2007/2010| CCNA |MCSE- 2003| Lync 2010|http://blog.amitrawat.net

Hi,
I recommend you check if any Public Folder on one member of a CAS array.
If yes, it will cause the issue.
I had encountered a similar issue.
The Problem exists when an Outlook client connects into a CAS array initial if
it connects to the CAS array member that contains the PF role, then Outlook
Converges all connections and displays both the Public and Private logons as one
single conneciton to Mail.company.com (the CAS array name) When the Clients IP
address changes, and it Re-connects, if it gets connected to a CAS array member
that does not have the PF server, then we get an ECwrong server Response from
Exchange, Outlook in it's reconnect logic Cannot follow the Redirection Result
that contains the correct PF server name, and displays the Error "the Admin has
made a change that requires you restart Outlook"
Finally, move PF to separate server as a workaround.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support
Thanks !
As i started this question saying i have already read these things . If this is the case i am wonder why microsoft didn't release a technet article where it must discussed about CAS array and Public folder confliction.
However, you said
"if it gets connected to a CAS array member
that does not have the PF server, then we get an ECwrong server Response from Exchange, "
I do have PF on both node then why this pop up.. i do understand if only one node has PF and new connection intiated by outlook connecting to other node which doesn't have PF then it will redirect to the node having PF and while doing so there is
the message.
FYI..
I hve two node server having CAS array and DAG configured on it. keep one thing in mind i am using kemp load balancer for CAS array.
I will appreciate all your help if you elaborate in depth.
Amit Rawat | MCITP - Exchange 2007/2010| CCNA |MCSE- 2003| Lync 2010|http://blog.amitrawat.net

My cooling fan has stayed on how do i stop it

my cooling fan has stayed on how do i stop it

if you are running pre to 2011 imac, then there should be at least 3 fans constantly spinning
optical drive
hard drive
cpu fan

"The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook" in Exchange 2013

In Exchange 2013, Outlook finds a new connection point made up of the user’s mailbox GUID + @ + the domain portion of the user’s primary SMTP address. This change makes
it much less likely that users will see the dreaded message “Your administrator has made a change to your mailbox.”
http://technet.microsoft.com/en-us/library/dd298114(v=exchg.150).aspx
Although the error message in the topic has been already improved a lot in Exchange 2013, the users may still encounter them in some specific scenarios. We have collected them and let’s discuss them in this thread.
Symptom
=======================================
Consider the following scenario:
Exchange 2013 was installed for a migration from Exchange 2007/2010.
The legacy Exchange server is removed after successful migration.
Exchange 2013 may be updated to Exchange 2013 SP1.
Some users were being randomly prompted with a popup in their outlook client with the following message when connecting with Exchange 2013 server:
“The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook”
Cause
=======================================
The issue may be caused due to Public Folders.
The msExchHomePublicMDB attribute on Exchange 2013 databases was set to deleted legacy public folder object.
Solution
=======================================
Removed the Public Folder from all the Exchange
2013 Databases. To do it, we can use ADSIedit.msc and remove the arrtibute - msExchHomePublicMDB from all the Databases:
1. Open ADSIEdit.
2. Connect to the Configuration container.3.
Expand Configuration, expand CN=Configuration,DC=Domain,DC=com.4. Expand CN=Services -> CN=Microsoft Exchange -> CN=Domain -> CN=Administrative Groups -> CN=Exchange
Administrative Group -> CN=Databases.5. In the right hand pane you will see a list of databases.6.
Right-click the listed database object -> Properties.7. Check whether the msExchHomePublicMDB value is set to an unavailable value. If you see reference to the old database,
please clear the value.8. Click OK.9. Check the rest of the databases to make sure
that they are not populated in the same way.
References:
https://social.technet.microsoft.com/Forums/en-US/2f736bdd-1c00-4a22-97a5-95faeadf1495/exchange-2013-sp1-users-randomly-prompted-with-the-microsoft-exchange-administrator-has-made-a?forum=exchange2010
https://social.technet.microsoft.com/Forums/lync/en-US/7a7b3cf8-8761-421c-9d55-6c84e05531c0/the-administrator-has-made-a-change?forum=exchangesvrclients
https://social.technet.microsoft.com/Forums/en-US/0d71c843-b662-493c-ab6e-30708929ef18/2013-sp1-problem-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and?forum=exchangesvrdeploy
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

This one? http://support.microsoft.com/kb/2934750

2013 SP1 problem - the microsoft exchange administrator has made a change that requires you quit and restart outlook

I've looked at other answers to this problem but they seem to relate to multi server environments or new migrations - neither apply here. The Exchange 2013 server was implemented last year as a migration from Exchange 2007. It has been running well since.
I upgraded to SP1 on Sunday night and since then all users, regardless of Outlook version, are continually being asked to "the microsoft exchange administrator has made a change that requires you quit and restart outlook". Clicking OK loads Outlook
normally (no restart). I can delete the Outlook profile and set up a new profile OK but the issue comes back again. Deleting the users roaming or local profile does not help either.
The CAS seems to be set correctly - when I run Get-MailboxDatabase | fl RpcClientAccessserver it returns the correct server.
There are no public folders set up.

Thanks for the update. It was the PF that caused the issue.
When I removed the old Exchange 2010 server it did not remove everything for AD. Had to manually remove the older sever.

The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook

Hi
We have 2 separate Exchange 2013 organisations in Our Company. All mail comes in on the first server registered With domain1.com and if it is mail Connected to the second server it is forwarded to server 2 which is registered With domain2.com.
When the users Connected to server 2 sends out mail they have default mail address firstname.lastnameATdomain1.com so the default address policy points to an email address registered on server 1. We have added a GPO for the domain2 users so that
Autodiscovery updates with the right domain name.
The problem is that every time a user With Outlook 2013 starts Outlook he gets an error saying "The Exchange administrator has made a change that requires you quit and restart outlook". This Message shows about every 10 minutes in Outlook. I think
this has to do With the autodiscover settings, but I'm not sure.
Any Idea how to remove this Message?
Regards
Anders

Hi,
From your description, I recommend you follow the steps below to repair the Exchange email account and check the result.
1. Start Outlook. Click File, Account Settings, and then click Account Settings.
2. With the Exchange email account selected, click Repair. In the Repair Account dialog box, click Next.
3. After the configuration finishes, restart Outlook.
After you restart Outlook, the status bar may show your status as Working Offline. To connect it, click the Send/Receive tab, and then click Work Offline to turn off this feature.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook - error message

I applied Exchange Server 2013 SP1 and since then some users are getting error message:
'The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook' on their MS Outlook.
Have tried a number of options including repairing the affected user accounts to no avail.
Any idea on how to resolve this will be appreciated.
NB: This error was not there before applying SP1.

kindly need help. i have same message "'The Microsoft Exchange Administrator has made a change that requires
you quit and restart Outlook' on their MS Outlook"
this is comes after applying 2013 sp1

Exchange 2013 SP1 users randomly prompted with "The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook"

I got a call to check an issue with a Exchange Server 2013 SP1 environment recently. All server was upgraded from Exchange server 2013 CU2 to Exchange Server 2013 SP1. It was done successfully but many users were being randomly prompted with a popup in their outlook
client with the following message:-
“The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook”
Although there wasn’t any changes of late in the environment there were random popups like these for multiple users. As the behaviour was not consistent and effecting the entire upgration population
Please suggest us how to resolve the issue.
Regards, Md Ehteshamuddin Khan All the opinions expressed here is mine. This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

Hi,
Does the issue happen to all Outlook 2013 users? Please create a new Outlook profile to have a try.
If it fails, please check the msExchHomePublicMDB value in ADSI Edit:
1. In Adsiedit, expand Configuration-->CN=Services -> CN=Microsoft Exchange -> CN=domain -> CN=Administrative Groups -> CN=Exchange Administrative Group -> CN=Databases.
2. Right-click the listed database > Properties.
3. Check whether the msExchHomePublicMDB value is set to an available value. Please change the value to <not set>.
4. Click OK.
Then check whether the issue persists.
Thanks,
Winnie Liang
TechNet Community Support

The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook. plus more!!!!

We just migrated our 2010 exchange running off a sbs to exchange 2013 running on server 2012 standard. The issues we are having is if you shutdown the old sbs server mail flow stops completly. The other issues is that clients using outlook 2013 get the
popup message "The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook." We have remade their profiles on the local computer, uninstsalled Office and reinstalled it... tried almost everything. The exchagne
server is on CU5 and no changes have been made in the last two months.

... if you shutdown the old sbs server mail flow stops completely.
If the inbound flow is affected, check the firewall (or antispam/andivirus device/server) configuration. Most probably, it is still forwarding the inbound email to the SBS.
In case the outbound email stops, check the Internet Send connectors. It's quite possible that you don't have an Internet Send connector with the Exchange 2013 specified as a source server. If this is not the case, check again the firewall - it might be
blocking outbound traffic on port 25 from the Exchange 2013 internal IP address.
... clients using outlook 2013 get the popup message "The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook."
Are the clients fully updated, or at least, running
Office 2013 SP1
Step by Step Screencasts and Video Tutorials

My iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!

my iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!
yours sincerly
jackfromsurrey

What I am saying is ..........
The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship with the Carrier and then follow the Carrier's process to unlock
With a PAYG it usually means adding a specified (by the carrier ) amount usually £15 /£20 depending on the carrier
This is how O2 function and according to Gemma this is how Vodafone work

Can I disable the fonts that come with iWork and iLife?

I use the most recently updated versions of Mavericks, Adobe CC and Fontxplorer.
When I am working in Photoshop, the list of fonts shows about 50 fonts that I never, ever, ever use. They come from iWork, iLife and the foreign language fonts that come with Mac. I suppose this is a minor problem, but it seems like something obvious that could be fixed.
Is there a way to either:
a) Get Photoshop to hide those fonts
b) Get Fontexplorer to hide those fonts from Photoshop
c) Disable fonts like Blackmoor, Schoolhouse, (many others) and the 8 fonts that include the word "Sangnam"?
THANK YOU.

Thank you Tom.
I've found the foreign language fonts in Fontexplorer. That's great.
Now, as for the iWork and iLife fonts... some of them don't show up anywhere.
For example "Blackmoor" isn't in the system fonts list.
Spotlight can't find it either....
But there it is, working, in the applications.

I cannot retrieve my emails on my Mac Book Pro operating on 10.7.3 Icloud was already workingit keeps asking for password and when i put correct password in it keeps asking for it again and again. This has just started today

I cannot retrieve my emails on my Mac Book Pro operating on 10.7.3 Icloud was already workingit keeps asking for password and when i put correct password in it keeps asking for it again and again. This has just started today

Though it's unlikely to be wrong if things were set up properly in the first place, as a check go to Mail Preferences>Accounts and check that the server setting for IMAP (incoming) is imap.mail.me.com (not just mail.me.com).
Your next step either way would be to go to System Preferences>iCloud and sign out, then sign back in again. (You can ignore warnings about data disappearing - your calendars etc. will disappear when you sign out but reappear when you sign back in).

TS1398 My ipad3 seems to have connection issues. It is wifi only but keeps losing the connection and is really slow in loading pages - a bit like dial-up speed! My iPhone 4s and daughters' ipad2 have no problems at all. Any ideas anyone?

My ipad3 seems to have connection issues. It is wifi only but keeps losing the connection and is really slow in loading pages - a bit like dial-up speed! My iPhone 4s and daughters' ipad2 have no problems at all. Any ideas anyone?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Not sure if anyone can help but I have a copy of Photoshop CS5.1. Ever since it was installed, every now and again when I try do something simple like save a file or scale something using the Transform tool, in fact anything at all it comes up with "Could

Not sure if anyone can help but I have a copy of Photoshop CS5.1. Ever since it was installed, every now and again when I try do something simple like save a file or scale something using the Transform tool, in fact anything at all it comes up with "Could not complete your request because of a program error". Have thought about re-installing it but I have lost my serial number. I'm living in Ireland and trying to get to talk to someone in tech support is a complete joke. Any ideas what to do ? Thanks

Ianp69549740 have you tried reinstalling Photoshop CS5.1? If so do you receive any specific errors? What operating system are you using?

HT4623 The new update of ios 7 massage didn't come till now and i don't know what to do??

The new update of ios 7 massage didn't come till now and i don't know what to do??

This post was down a few from yours.
https://discussions.apple.com/thread/4842660?tstart=0
Restore Tiger 10.4 & Leopard 10.5 DVDs are available from Apple by calling 800-767-2775 as of January 20, 2013.
https://discussions.apple.com/thread/4720126?tstart=0
Robert

Cooling fan has a fast speed that comes on now and again. is this a problem

Similar Messages

Maybe you are looking for