COPA: adding new characterstic

Hi All,
Can someone give me the steps to add a characteristic currency.
I am trying to design a report which will show revenues in transactional currencies however i do not have currency characteristic in my operating concern.
I tried t code KEA5 and tried using table VBAP but the currency field is greyed out.Please help me.
All useful answers will be rewarded.
Regards,
Reddy

Thanks Sridhar for the reply.
But my requirement is
"is to have a report where client can select only the transactions that took place for a company code in a specific transaction currency"
and the attributes of my operating concern are
operating concern currency
company code currency
I did not find any currency options while adding key figure revenue for the report.
Can you explain a little bit as to how to achieve this?
Regards,
Reddy

Similar Messages

Issues with Writing back data to Planning Cube After adding a new characterstic

Hello,
We have two cubes and a MP on top of it. ( Reporting Cube and Planning Cube ). An aggregation layer has also been built and so does a planning BEx query on top of it.
Before Scenario: things were working fine as we were able to write back data to planning cube using the BEx.
After Scenario: We created a new Dimension in the planning cube and added a new characteristic ( lets call it ZX_KEY ) . This Characteristic holds the concatenated values of some of the other characteristics in its master data tables . ( For ex: Account_Customer ID_Country-code_Industry-code ).
This new characteristic is also present in the reporting cube and has been added and transferred to MP.
This new characterstic was added to the planning BEx query as one of the rows and we executed it the analyzer. After entering the required values for all characterstics ( including the newly added ZX_KEY ) and the key figure values, we tried saving it. Now this is where the Analyzer is throwing up this error..
~~Characterstic combination cannot be assigned to part provider ~~
~~Characterstic 'ZX_KEY'; Characterstic value 'R123000000_12_US_TX'~~
~~ Entered values are incorrect:Correct before navigation ~~
The value that we are entering ( R123000000_12_US_TX ) is picked up from the master data table of ZX_KEY by double clicking and selecting it from the fetched values. So i am not sure as to why its throwing up the above error. Request your help on this please.
regards,
Karthik

Hi,
Try to check that all characteristics are correctly assigned at multiprovider level.
hope it helps

Adding of new characterstic

Dear friends,
               I want to create new characterstic distribution channel from SAP table KNVV. But when I select that table, distribution channel field is deactivating. I am not able to select that field. Please let me know how get this characterstic from the available tables.
Regards
Jay

Hi,
         Sir, Problem is Client asked that Plant and distribution channel should be avialabe in selection screen while executing the KE30 report so that they can enter required plant and distribution channel.
     1. For this purpose I created global variables for Plant and distribution channels.
     2. I changed the form by selecting global variable plant from the available characterstics.
     3. But distribution channel is not showing in the available characterstics while changing the form in KE96. But this distribution channel is showing in ke32 (report change) under available characterstics.
Why this characterstic is not showing under available characterstics while changing the form in KE96. How can I show this characterstic in selection screen? Please help me
Regards
Jay

Impact of adding new value fields in ongoing operating concern.

Hi All,
Want to know the steps of adding new value fields in the existing operating concern in COPA?
What is the overall impact of addition of New Value fields in the running Operating Concern?
How do we test the addition of new value fields?
Is the addition of New Value fields to the running Operating Concern advisable?
Your support and advice is highly anticipated and appreciated.
Thanks & Regards
9819528669

HI,
please search in SCN forum before you post:
Re: Adding a ValueField to an existing Operating Concern?
Best regards, Christian

Added new field to cube but data not passed from DSO

Hope someone can help.
(BI 7.0) We added new fields into a cube. The fields already existed in the DSO. When we ran the process chain in development for the first time after making this change, we notice that the 'historical' data for these fields is populated in the cube. When we do this in our quality system only new data passed to the cube is updated. In development in the sub-chain DTP request we see all previous requests listed under selections. In quality it is only the latest request. The only difference is that the DeltaInit flag in the DTP request in development is ticked (extraction mode) - but not in quality. Does anyone know whyb this is?

hi peter,
Adding fields to cube doesn't affect delta status...The delta DTP should be able to handle delta requests automatically.
I guess in you quality system, the cube already got all requests updated from ODS before you importing the change request. And in develop system none of the requests in ODS were updated before the change.
Regards,
Frank

In ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?

in ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?

Hi,
Lion has changed the way reminders (todos as was) work. They now seem to need to be in a seperate calendar.
In iCal open the File menu and select New Reminder List... and select where to put it.
Best wishes
John M

Added new fields in vendor master in xk01 but data is not getting saved

Hi experts,
To add new fields in vendor master i have followed the following steps :
1.) Appended a structure ZRTGS in LFA1 table with required fields and activated
2.) Added new button in xk01( vendor master ) using spro -> logistics-general -> business partner -> vendors ->
control ->adoption of customer's owaster data fields -> prepare modification free-enhancement of vendor master record
Created a screen group ZR and defined label tab pages with function code ZRTGS and saved entries
3.) Created a implementation for BADIs VENDOR_ADD_DATA and VENDOR_ADD_DATA_CS.
4.) Created a program with my own subscreen for the required fields
The button is getting displayed in XK01, XK02 and XK03 respectively. Whenever the button is clicked the subscreen with
the fields is also displayed. But whenever i try to save the data in either XK01 or XK02 it is not getting saved in to the
database table LFA1.
Request your help in this regard.
Thanks in Advance.

Hi,
You may need to check this include .
EXIT_SAPMM06E_008 -->Import Data from Customer Subscreen for Purchasing Document
Thanks,
vamshi

Adding new date field to already loaded data target.

Hi,
we have a cube containing date feild such as 0CALMONTH. the data is being loaded to the cube. now they have added new date feild (0FISCYEAR). how to get data to this feild. there is no data coming from source system for this feild. please can any one tell me how to include this feild and load data into it.
with regards,
sreekanth.

Sreekanth,
If Record creation date is the right field for deriving fiscal year, Why cant you derive the year from the date...by using automatioc time conversion...?? In update rules...??
For exising data, you can do loop back to populate the data. see the below doc, for more info:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f421c86c-0801-0010-e88c-a07ccdc69601
Hope it Helps
Srini
Message was edited by: Srini

I have a Ipod touch and recently added new music to my itunes library on my laptop. When I sync with my ipod, the new music does not show up on my ipod even though the sync process seems to be working.

I have an Ipod touch and recently added new music to my Itunes library. When I sync with the library, the new music does not show up on my ipod. The sync process seems to be working and there is still plenty of space on the Ipod for new music so I'm not sure what the problem is!

What happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs?

Adding new albums to smart playlist PLEASE HELP

Having a little trouble adding new albums to smart playlist that already exist. Can this be done?

Having a little trouble adding new albums to smart
playlist that already exist. Can this be done?
I am trying to edit smart playlist but songs dont show up, they are in the library.

Adding new characteristics to cube with data

Hi Gurus,
i need to add some characteristics to a cube already in production, this cube is customized version of material stocks/movements cube (0ic_c03).
i am looking for a way to add the new characteristics without having to do reinitialisation (opening stock,...), i am thinking about a loopback process but how do i manage to get the new characteristics populated for the historical data?
Thank you.

Hi,
If you want to load historial data, you must take ECC down time and re-intialization is required.Becasue you are adding new object in Cube and for that you need to change the Update rules, then need to load historical data, so without down time and reinitialization it is not possible.
Check like below.
You have data in PSA, so try to delete data from Cube and then load from PSA. Because you may write code in Update rules on;y I think. So in that case, it may work.
Thanks
Reddy

Adding new fields to Item Data - PO (ME

Hi All,
Is it possible to add new custom fields to PO Item Data in Confirmations tab and these new fields are required only in PO Change (ME22N).
How can we achieve this!
Can anybody provide feasible solution for the same!
can anybody tell me if this is possible!
Thanks in advance.
Thanks,
Deep.

Hi All,
Thanks for the reply.
Can anybody confirm BADI ME_GUI_PO_CUST will acheive desired functionality for above posted issue!
Functionality: Adding new custom fields to confirmation tab. During Inbound delivery in confirmation tab (Item data) if 'Confirmation category' is selected then the new custom fields should show up below for input & they can be saved.
if 'Confirmation category' is not selected then new custom fields should be invisible.
Thanks,
Deep.
Edited by: Deep on Jul 24, 2009 4:49 AM
Edited by: Deep on Jul 24, 2009 5:05 AM

Adding new fields to the data flow

Hi,
I am currently planning to add some new fields in one DSO and map it (with info source) in the update rules.
Will adding new fields to Info source - Comm. structure affect all the update rules connected to it?
The info source is connected to multiple DSO.
(The data source is currently under enhancement for these fields). Once this is done, we have to replicate it to BW.
Thanks,
Naveen

yes.
Once the enhancement is done for data source in r/3 side, you will have to replicate the datasource in BW.
Adding new fields will deactivate the update rules. You have to map the same in update rule and activate the same.
This will require activation of transformations, update rules, etc for related DSOs. Try to find out the where used list for the DSO where you want to add the new objects. Then check each objects whether these are activate after the changes. If these are inactive, you will have to activate all the objects.
Cheers
Chanda

Adding new data to update multiple series in charts - in one action

I would like to know how to update a data series range in a chart all at once as can be achieved with Excel by
manually entering row numbers to expand the data series range or
by dragging a reference frame in a table to include additional data in the range.
At present, the only way that I have discovered I can update a series is to manually change the cell reference detail for each series individually. This is achieved by selecting a single line and clicking several times on the Data reference cell in the Inspector Chart option by highlighting the cell reference details and then manually changing the cell reference for each series separately. This is tedious, time consuming and more than a little clumsy! What used to take me a few minutes to update my charts in Excel is taking me tens of minutes in Numbers.

theguardian wrote:
I would like to know how to update a data series range in a chart all at once as can be achieved with Excel by
manually entering row numbers to expand the data series range or
by dragging a reference frame in a table to include additional data in the range.
Unless I'm misreading this, similar techniques work in Numbers.
The original table contained only the sequential labels in column A and the data shown on the upper chart.
I made two changes, similar to those in your list (but in the opposite order, hence the reversal in my numbering):
2. Added data to cells B11:B15 (labeled J-N). (The data added is a copy of the first five data from the original series.) Selected the chart, then expanded the data series by dragging the control (small circle) down to include these cell (plus B16) in the charted range. The chart updated to include this data.
1. Selected B11:B15, then went Table > Add Rows Below (keyboard shortcut: option-down arrow). Numbers added five rows to the table, and updated the chart to include those rows, as shown in the lower version of the chart. Paste the data into these new rows to add it to the chart.
Although I had selected rows inside the charted range when adding new rows (to keep that "O" label on the x axis and show the 'space' before it), the five rows could as easily have been added to the end of the chart. Select B12:B16, press option-down arrow.
Regards,
Barry

How to create new subsite while adding new item to the list by using javascript?

hi,
I hav a task ie, when I add item to the list then subsite will create with that list item title and description . So By using javascript, I have to create subsite while adding new item to the list.
Help me to solve this.
Thank you,

Is your item getting added through Javascript client object model ? If yes, you can write in the success delegate of your list creation method the logic to create the subsite.
function CreateListItem()
var clientContext = new SP.ClientContext.get_current();
var oList = clientContext.get_web().get_lists().getByTitle('List Name');
var itemCreateInfo = new SP.ListItemCreationInformation();
this.oListItem = oList.addItem(itemCreateInfo);
oListItem.set_item('Title', 'My New Item!');
oListItem.set_item('Body', 'Hello World!');
oListItem.update();
clientContext.load(oListItem);
clientContext.executeQueryAsync(Function.createDelegate(this, this.CreateListItemOnSuccess), Function.createDelegate(this, this.onQueryFailed));
function CreateListItemOnSuccess() {
var subsiteTitle = oListItem.get_item('Title');
//Logic to create a subsite
function onQueryFailed(sender, args) {
I have added a sample flow for the above scenario. Have a look at the following lnk for how you can craete a subsite using ecmascript.
http://ravisoftltd.wordpress.com/2013/03/06/sharepoint-2010-create-site-with-ecma-script-with/
Geetanjali Arora | My blogs |

COPA: adding new characterstic

Similar Messages

Maybe you are looking for