Copy all fucntions, proecdures and packages to another DB

Hi
I hope someone can help me. I don't normally have to do this so I am at a bit of a loss as to the best way to do this.
I need to copy all functions, procedures and packages with a specific prefix (long story - nothing to do with me) along with their grants and synonyms to another database (dev to many other dbs, not just schemas ). How is best to do this? I work directly in development so this is usually taken care of and if i'm aksed its a quick execute of the package etc from souce control but obviously I don't want to be doing that.
Any pointers would be much appreciated.
Thanks
Vicky

This is great but I have just realised I face another probelm currently.
I do not have direct access to the directory on the server where datapump files are located (and I assumed saved during an export. I don't have DBA rights either. Is there any ohter way of me generating scripts etc or should I just use a bat file and execute each source file one after another? and generate synonyms and grants using a sql command?
just for info, basically I am responsible for all custom code so need to be able to move it around as requested.
Again, sorry for asking, this is trivial but I would rather make sure I am doing this the right way.
Thanks
Vicky

Similar Messages

Copy all subform data and paste into another subform

Need: I would like to have a button within a subform that allows you to copy all the data (many fields) and then paste it into an empty copy of the subform. Of course the info pasted would fill in all the fields etc.
Reason: We routinely need to move subform data from page 3 in the document to page 11 (example). Currently we insert a new subform and copy/paste each field from 3 to 11 and then delete 3. It would be great to press a copy button in 3 and insert a new subform and paste.into 11.
Is this possible?

Steve's advice is good if this is a runtime question - how a user, filling out a form, can copy data from one section of the form to another.
If this is a buildtime question - how a developer can duplicate a subform to be used elsewhere in the same form or in a different form, you have the following options:
Duplicate and move. For one off tasks, select the subform in the Hierarchy pallet, and click Ctrl-D. This creates a copy of the subform, with all its contents, which can then be dragged in the hierarchy to its new position.
Cut and paste. For one off tasks, select the subform in the Hierarchy pallet, and click Ctrl-C. Select the new position in the Hierarchy and then in the Design View (it seems odd to select the same object twice in different pallets, but this is required for the copied subform to be pasted into the right place). Click Ctrl-V
Fragment. When the exact same subform is going to be used several times in the same and different forms, create a fragment by selecting the subform in the Deisgn View and drag to the Fragment Library pallet. This creates a fragment XDP file. By dragging the fragment onto forms, you are creating links back to the fragment XDP file. Change the fragment and next time you open a form in Designer it will inherit the changes. Fragments cannot be customised for a specific form.
Common Object. Similar to fragments, you create a common object by selecting the subform in the Deisgn View and drag to the Object Library pallet. The difference is that when you drag a common object onto a form, it is inserting a copy of the subform. The inserted subform is not linked to the common object and so it can be customised for that form and will not inherit changes to the common object.
Ben Walsh
www.avoka.com

Using Terminal to copy all files (hidden and not hidden) and folders from one place to another

How -using Terminal- can I copy all files (hidden and not hidden) and folders (and their contents) from one place to another

ditto
DITTO(1)                  BSD General Commands Manual                 DITTO(1)
NAME
     ditto -- copy directory hierarchies, create and extract archives
SYNOPSIS
     ditto [-v] [-V] [-X] [<options>] src ... dst_directory
     ditto [-v] [-V] [<options>] src_file dst_file
     ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
     ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ...
           dst_directory
     ditto -h | --help
DESCRIPTION
     In its first form, ditto copies one or more source files or directories
     to a destination directory. If the destination directory does not exist
     it will be created before the first source is copied. If the destination
     directory already exists then the source directories are merged with the
     previous contents of the destination.

I just bought a new macbook air. Now i want to sync my iphone to this computer. I copied all my songs and apps to the itunes. If I sync do i loose all my contacts and notes? because i could not copy it to itunes

I just bought a new macbook air. Now i want to sync my iphone to this computer. I copied all my songs and apps to the itunes. If I sync do i loose all my contacts and notes? because i could not copy it to itunes

You need to use the backup of your PC to transfer all the music files to iTunes on the Mac.
If you have no backup then you have a difficult task ahead of you as iTunes will only allow you to sync purchased music from the iPhone back into iTunes. Any music you loaded into iTunes yourself will not transfer from the iPhone to iTunes, this is to prevent stealing of music. To sync iTunes purchased music from the iPhone to iTunes, connect the iPhone and open iTunes, but when asked do NOT sync the device. then right click on the iPhone in the iTunes source list and select the 'Transfer Purchases' option, you will also find this commend in the File menu.
If you are in the US, you can use the new iTunes in the Could feature to redownload your iTunes purchased music / apps / books for free.
If you want to transfer all the content from your iPhone to you Mac then you will need to use Google to find a 3rd party piece of software that will do this for you.

How can I compile all functions, procedures and packages with a script?

I need to compile all functions, procedures and packages of 5 schemas (users) with a script.
How can I do it?
Thanks!

you can create a script to select all invalid objects in those schemas Since Oracle 8 introduced NDS this approach has struck me as a trifle old fashioned. It's much simpler to loop round the query in PL/SQL and use EXECUTE IMMEDIATE to fire off the DDL statements. No scripts, no muss, no fuss.
Having said that, the problem with this approach and also with using DBMS_UTILITY.COMPILE_SCHEMA is that they do not compile all the invalid objects in dependency order. This may result in programs being invalidated by the subsequent compilation of dependencies. This is due to the introduction of Java into the database.
The UTLRP script is much better, because it (usually) avoids cyclic references. But you still may need to run it more than once.
In general it is better to avoid sledgehammer recompilations (like DBMS_UTILITY.COMPILE_SCHEMA, which starts by invalidating all the objects). If we have twenty invalid objects, nineteen of which are dependencies of the twentieth, we actually only need to recompile the master object, as recompiling it will trigger the recompilation of all the others.
Cheers, APC

(KP97) Copy All Secondary Costs and Assessment cycles to Another Version

Does anybody know if transaction KP97 is capable of copying all planned secondary costs residing on a cost center from one version to another? The only secondary cost we have been able to copy are the activity allocations. We would like to be able to copy Overheads, Settlements and Assessments from one version to another.
Does anybody know of any SAP functionality that will allow you to copy assessment cycles in CO from one version to another? Currently everytime we create a new version we have to recreate the assessment cycles in the new version...it sure would save us a lot of time if we could copy them.
Any help would be greatly appreciated!

Hey,
I currently encounter the same problem, but I do not have the solution...
I can tell you the following: <i>"If you want the plan allocation data (such as assessment or distribution) to also be available in the target version, you need to make the corresponding allocations in the target version. You need to create the cycles in the target version. You can reference the cycles in the source version for this".</i> This is the official explanation of the SAP Help website.
The copying of secondairy postings from settlements should be possible, but the copying of figures which result from settlements do not work when I run transaction KP97...
You can find the information on the underneath location.
http://help.sap.com/saphelp_47x200/helpdata/en/08/514c8743b511d182b30000e829fbfe/frameset.htm
I hope this can help you a bit.
I hope others will give there opinion, so we can solve this problem.
Regards,
Karolien.

Is it possible to copy all the channel strip info to another Logic project?

Hi
I'm trying to combine two projects so that I can crossfade from one to another yet still have full mix control. I've figured out how to copy the audio files (drag and drop), and that's brilliant, but I'd like to keep all my channel info without having to copy every single strip and rename them. Can anyone shed light on this and save me a couple of hours?
Thanks

Yeah, as Miles says, the track import function might be your best bet - you have to navigate to the files you want - double click on the Project file name to see what's in there and you can bring back your channel strips and the track contents, there are a few options to choose to decide what you want, but that's OK, innit ?
As DataStream says, you can even bring back the Mixer configuration, so that's something else to think about.

IN Premiere Pro CC how can I group copy all files in time line to another part of the time line

How can I group copy all files from one part of the timeline to another part

From the Premiere Pro manual (I believe track targeting matters, too. That is, the targeted tracks only are copied):
Copy command enhanced to operate on a range in a sequence
The existing Copy command (Edit > Copy, Ctrl+C (Windows), Command+C (Mac OS)) is enhanced when used in the Timeline panel. If there are no clips or keyframes selected, and an In Point or Out Point is set, then the range of time between the In point and Out point is copied to the clipboard.

Copy all values from one page to another

Dear all
i have creation page user enter all the records and save if the details are not in customer master
then user click add customer it will call to master customer page and as well as i want to copy all these fields to customer master when ever he click on add customer
how it is possible..
Regards
Sreekanth

Hi,
before navigating to the Master customer Page...
take all the values in hashmap
hm.put("value1",value);
hm.put("value2",value2);
Pass the hashmap in pageContext.setForwardURL();
then on Master customer Page
grab the values in string variables using pageContext.getParameter
and set it on fields using
setText();
Thanks,
Gaurav

Why doesn't iTunes copy all my files, and how do I know which it left out?

Hello,
I had iTunes on my old PC, and when I installed it on my new one (Vista Home Premium), it very helpfully deleted everything off my iPod and copied it all back again! As it happens, the only files on the iPod were from the iTunes library, so it didn't matter, but it was annoying.
Anyway, now it has (supposedly) synched my library and iPod, if I look at the library, it shows 1164 songs. If I look at my iPod, it only shows 1157 songs.
How do I know which songs iTunes didn't copy over? More to the point, anyone any idea why it didn't just copy all of them?
Thanks for any help.

OK, thanks for all the replies.
hmacross: I have checked for duplicates, and there were some there. This was because when I installed iTunes, it insisted on scanning my entire hard disk and adding every audio file it could find, even though I didn't want it to. I only wanted it to add ones in my Music folder. I had to do a fair amount of work to clean this up! Anyway, I just checked again, and there aren't any duplicates in my iTunes library.
Chris: If I look in my iTunes library, and show all the audio files as a big list, at the bottom it gives me the total number of files, and the total play length. If I look at the iPod, I see similar numbers.
After some tidying up, the iTunes library shows 1149 songs, and the iPod shows 1147 songs, so there's still a discrepancy. I have double checked for duplicates, so that's not the issue.
Thanks again. Any further help would be appreciated.

Copying a flash file and pasting into another one...

I want to copy a .swf file I have and paste it into another one, frames and all. I have tried but nothing gets copied over correctly. Either that or my buttons are on a single frame.. and no longer act like a button with the -Over-Up-Down-Hit frames. Can this be done? please help...
Thanks Guys,
-Dedikation-

Select all of the timeline frame, right click the selection and choose Copy FRames. In the other file, Insert -> New Symbol -> MovieClip... etc... select the one keyframe in the empty movieclip's only layer, right click the selection and choose Paste Frames. All layers and frames should paste in as they were copied.

Copying from one arrangement and pasting into another arrangement

Hi, I'm using Logic Express 8.
I'm wondering if there is a way to copy several tracks from one arrangement window into another. I've tried to do this simply by copying and pasting, but when I paste into the new arrangement window I get error messages and the tracks pasted into the new window have a speaker icon with an "X" through it - and obviously no sound.
Am I missing something, or perhaps this is simply a limitation that exists with using express instead of pro?
Thanks a lot.

You can do this by simply importing the data from one project to your new one. Check it out here.

Copy the SQL Binaries and Data to another drive and then change the drive letter to previous drive letter

Hi All,
We have SQL Server 2012 SP1 installed on E drive (which means SQL Binaries, Database and LOGs) are in the same drive E, we are not able to backup the SQL Server because according to Backup Vendor their is a problem with the DISK E which is why the backup
is not successful, We have added one more drive with the same space, we have stopped SQL Server services and copy each and every thing from E drive to new drive and changed the current E Drive to K and changed the new drive to E, after that when we tried to
start SQL Service but it was not starting, we have again reverted back the original drive to E and service was successfully started, please note here that SQL server service logon is NT service / local service. Please help us that how to do achieve this as
we are using the same E drive and OS should not know any thing. Please help us to copy and then change the drive letter to E so that we can delete the old drive.
Thanks
If answer is helpful, please hit the green arrow on the left, or mark as answer. Salahuddin | Blogs:http://salahuddinkhatri.wordpress.com | MCITP Microsoft Lync

We have stopped SQL Server services and copy each and every thing from E drive to new drive and changed the current E Drive to K and changed the new drive to E, after that when we tried to start SQL Service but it was not starting,
You should not have done this. Even if you install complete SQL Server on Separate dedicated drive few binaries would always go on system drive that is C drive so your idea of moving files to other drive would sure create a problem. As a fact you cannot
move SQL Server complete installation from one drive to other apart from uninstalling and reinstalling again.
Copy it back an hope fully you would be able to restart. Why should you take a product which allows you to change sql server drive its a bad product. I guess backup engineer does not how to configure backup agent
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

How to copy all objects (incl. joins) from a BM into another existing BM

Hello, i'm a regular viewer of this forum and now i have one issue that looks simple but i cannot resolve it.
To make it less complex let's say we have a business layer with two business models (e.g. CIS-Finance and CIS-Logistics). For each BM we have a seperate subject area in the presentation layer.
Each BM has unique objects, no object (like dimension time) is appearing in both BM's.
Now there is a business requirements to have a 'mega' model, that is one extra BM that is combining both BM's. Let says we want to merge both model into one new big model.
To achieve this I did the following:
1) Duplicate CIS-Finance to CIS-All (using right mouse click on BM and click duplicate and change the name of duplicated BM to CIS-All)
2) Then I select all objects in CIS-Logistics and copy all these objects and paste them into the new BM CIS-All.
All selected objects were copied into the BM but the logical joins are not copied as well the content level information of the source tables.
Is there a way to copy also this information (logical joins and content info), or do you suggest another approach to achieve this goal?
Thanks, Ben

what i did:
1) i copied the original rpd to rpd2
1) in the original rpd, i duplicated CIS-Finance to CIS-Logistics (so I have the same name for the BM to where i want to copy to)
2) in the rpd2 i selected all objects in BM CIS-Logistics
3) I pasted all objects to rpd BM CIS-Logistics (so BM has same name)
unfortunately it doesn't work, all objects are copied but not the joins and content.
You suggest UDML, can you be a little bit more specific? I searched the internet, found out what UDML is, but I cannot map it to what I want.
Thanks.

Copy procedures, functions and packages to files

Can anyone help me, how to put all procedures, functions and packages to files. It is important, that when procedure have name PROCEDURE_CREATE then file have PROCEDURE_CREATE.txt
Is that possible?

Hi,
I guess you want following.
Do:
1 DECLARE
2   CURSOR Cur_All IS SELECT DISTINCT NAME
3                   FROM ALL_SOURCE
4                              WHERE ROWNUM <= 10 ;
5           --        WHERE OWNER LIKE 'KIN%' ;
6   v_Name ALL_SOURCE.NAME%TYPE ;
7 BEGIN
8   OPEN Cur_All ;
9   LOOP
10    FETCH Cur_All INTO v_Name ;
11    EXIT WHEN Cur_All%NOTFOUND;
12    DBMS_OUTPUT.PUT_LINE('SPOOL '||v_Name||'.txt') ;
13    DBMS_OUTPUT.PUT_LINE('SELECT TEXT FROM ALL_SOURCE WHERE NAME ='''||v_Name||''' ORDER BY LINE ;') ;
14    DBMS_OUTPUT.PUT_LINE('SPOOL OFF') ;
15   END LOOP;
16   CLOSE Cur_All;
17* END ;
SQL> /
SPOOL STANDARD.txt
SELECT TEXT FROM ALL_SOURCE WHERE NAME ='STANDARD' ORDER BY LINE ;
SPOOL OFF
PL/SQL procedure successfully completed.
SQL> Do spool of the above anonymous block. And run it as a SQL script. You will get required output.
Regards,
Arpit
Message was edited by:
arpit_shah4u

Copy all fucntions, proecdures and packages to another DB

Similar Messages

Maybe you are looking for