Copy Customizing for System Monitoring

Hello!
I am about to set up the system Monitoring for the different business systems.
I have seen there in Setup System Monitoring function "Copy Customizing"...
Can I copy the predefined Alerts or also the user defined such as from Tcode RZ20?
What is the procedure to copy the alerts from one system to the another?
Thank you very much!
regards!
Thom

Thank you!
I have got a realy good SAP Tutot regarding this issue..
regards

Similar Messages

Setup and configuration for system monitoring and IT Reporting for Java sys

Hi all,
How to setup and configuration for system monitoring and IT Reporting for Java system ?
How to connect Java system to Solman system?
Regards,
Neni

HI,
What is your OS? You can use SAPCCMSR.exe to monitoring IT Reporting Java system on Solman.
Go to solman rz21 create a csmreg user. and configuration fil for agent. copy configuration fil on usr/sap/ccms/..
Go to comman line cd ../user/sap/xxx/sys/exe/.../ wite SAPCCMSR.00 -R pf=< ...../sys/profile/instans profile> .
You can se agent on rz10 and use this connaction on rz20 to monitoring and IT Reporting Java system on Solman.
I hope this help

CCMS is used for system monitoring , why should we use solution manage ?

CCMS is used for system monitoring , why should we use solution manage ?
Whats the relationship between CCMS system and SolMan?
Thank you .

hi,
I just want to ask a question. At our client we have solution manager and CCMS. There is data in CCMS I can extract, it is loading on BW side ok the same number of recs, but the problem on CCMS cubes says there are the same number of record in the cube and also showing as the data is ready for the reporting. But when I run the report and view the data as listcube it is empty.
ANy of you have the situation like this cube say it has the data but when do th BEX or infocube contents the cube is empty nothing in there. The same thing is happening with hourly, 15 minute and daily cubes.
Anyhelp on this matter is appreciated

RFC destinations for system monitoring could not be assigned

Hi,
I am having 2 system landscape DEV (DEV/QA), PRD. I want to monitor both system from Solution manager and created both system, db, server & logical component in SMSY.
Problems:
1. System not allowing to assign RFC for (PRD) system monitoring where as it is working for DEV system.
2. When running System monitoring setup only PRD is showing there, both server/system should be shown ?
3. When i am tring to assign system in RZ21 manully then also system giving error in case of PRD server. where as DEV system is created in RZ21 -->> Technical Infra. --->>> Display topology (Error when calling the underlying C function (function 'SALS_MS_GET_LOCAL_MS_INFO')
Message no. RA336)
Please help me to solve this issue.
Thanks & Regards,
Tejinder

Hello Arwel,
if the solution manager should monitor itself via EWA, you have to set "mySAP.com Support Workplace system" to "NONE". To get there, start transaction SDCC in you solution manager system -> Maintenance -> remote enviroment -> default target system.
Hope that will help you.
regards,
Marco

Recommendations for Windows 7 desktop gadgets for system monitoring?

Hello there,
Anyone has recommendations on a windows 7 desktop gadget that will provide system monitoring data like cpu, memory, temp etc?

I got these ones + running in the Systray: Speedfan, Everest and Core temps
You never control enough

Basic Strategy / Best Practices for System Monitoring with Solution Manager

I am very new to SAP and the Basis group at my company. I will be working on a project to identify the best practices of System and Service level monitoring using Solution Manager. I have read a good amount about SAP Solution Manager and the concept of monitoring but need to begin mapping out a monitoring strategy.
We currently utilize the RZ20 transaction and basic CCMS monitors such as watching for update errors, availability, short dumps, etc.. What else should be monitored in order to proactively find possible issues. Are there any best practices you all have found when implimenting Monitoring for new solutions added to the SAP landscape.... what are common things we would want to monitor over say ERP, CRM, SRM, etc?
Thanks in advance for any comments or suggestions!

Hi Mike,
Did you try the following link ?
If not, it may be useful to some extent:
http://service.sap.com/bestpractices
---> Cross-Industry Packages ---> Best Practices for Solution Management
You have quite a few documents there - those on BPM may also cover Solution Monitoring aspects.
Best regards,
Srini
Edited by: Srinivasan Radhakrishnan on Jul 7, 2008 7:02 PM

Copying custom and system documents via SDK

Hi everyone,
A client needs to copy Purchase Order document to AR Invoice.
Looks like that the only way to implement this feature is to straightly set matrix cells' values, for example
var itemCode0 = InvoiceFormMatrix.Columns.Item("0").Cells.Item("0").Specific as EditText;
itemCode0.Value = "Code00";
So, the first question - is it any faster way to fill system matrixes? I've already tryed DBDataSource.SetValue() and Matrix.SetCellWithoutValidation() - they are forbidden to change system columns.
The second question: matrix.AddRow() method doesn't increment the "#" column (Line Number) automatically, even after form.Update() call. How can I fix this issue?

Hi Ankit,
Yestarday I implemeted a similar approach. However, this sollution has several shortcomings:
Extremely slow behaviour - it is obvious, however
As I mentioned earlier - "#" column is filled with "1"-s - no automatic incrementation.
I cannot set Description column, because it raises "ChooseFromList" if several ItemCodes has the same Description. First I set ItemCode, however, SDK doesn't set the corresponding Description automatically as one might expect. Suppressing ChooseFromList event "before action" (BubbleEvent = false) leads to emty Description column.
Thus, I have a bunch of problems against a few benefits ...
Hi Ady,
"Why don't you use DI API to copy the SO to Draft AP Invoice" - this is the client demand. He needs such "Copy From" feature according to his business process. Also he opposes to any auxillary documents which could easily confuse inexperienced user of SAP B1.
Best regards, Evgeny.

EEW customizing for system-wide object extension

Hello.
We are trying to enhance BUPA object through easy enhancement tool. We
customized EEW via EEWC transaction and we created a RFC connection to
let central system (CRM) and target system (R/3 system) to communicate
each other.
After these steps we launch EEWB transaction from CRM system by doing
the following steps:
1.We created a new project
2.We created a new extension for BUPA object, and type of
extension: Add new fields
3.At this moment Wizard is started.
4.We enter the name, enter the technical properties .
The problem appears when we try to enter SYSTEM RELEVANCE, we can´t
state in which other systems the fields of the CI Include are relevant
because only column Relevant for BW appears, and we want
enter Relevant for R/3. However the transport requests are created
system-wide what shows that the two systems are communicated.
Nevertheless, no objects are extended in the target system although the
extension is executed properly in CRM.
Could you please tell us what is due to?
Thanks in advance

Carmen,
Have you defined the R/3 system landscape in transaction EEWC. In order to define a field as R/3 relevant the corresponding R/3 systems need to be defined in the EEWC setup. However EEWB does not work with R/3 backends lower than 4.7 from past experience. If the R/3 system does not have the packages or function groups that start with OXT. You must have at least 4.7 or higher in order to use the auto-generation features for R/3.
You must also make sure you perform the post-processing steps described in the EEWB documentation(in the standard CRM help) in order to make sure the processing fully works.
Good luck,
Stephen

RFC configuration for system monitoring / Early Watch reports

Hello Basis Gurus:
Please help me out.....
The early watch reports in the solution manager of my system are failing consistently to execute.This is happening for all the 3 systems DEV,QAS,PRD.when i click on individual earlywatch reports it takes me to a screen which says "data for this report is overdue.....go to your satellite system SDCCN to see why the data was not sent...."
It says ...check the following things.....
"The RFC connection for the SAP Solution Manager system is not working.
The 'Task Processor' background job, which collects the session data, has been changed.
Problems arose while data was being collected (see the detail log for the task that collects the session data).
A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data."
I can see the task processor job , and the periodic Maintenance package scheduled everyday and completed sucessfully.So is it the RFC which is causing the problem.
Im SM59 of the solman, i can see system generated RFCs for the PRD,DEV,QAS and SND (...3 for each of these systems...).
say for PRD, these are the 3 RFCs.
1.)SM_PRDCLNT<client#>_READ.
2.)SM_PRDCLNT<client#>_TMW.
3.)SM_PRDCLNT<client#>_TRUSTED.
I am not sure which RFCs among the 3 for any given system does the solman use to communicate to the satellite systems.
*The user id section in the Logon Data of any of these RFCs is blank.and the password says "is initial"...*is this correct.Does the user id have to be a communication type of user...
PLeaase advise as to what could be going wrong..
Regards.

Hi,
The system uses ABAP Connection (Connection Type 3) to connect to different Systems to execute Functional Calls.
Now in your case, there are 3 different connections meaning your Basis Team has used 3 connections for different connection activities. This is totally a business dependent scenario.
Now each time you create a RFC Connection, the system will need the following information to remotely call another system, they are:
Host Details of Target System
Logon Details to remotely login
For RFC Connections the User Type has to be Communications User. But there are companies which use Dialog User Types as well to remotely login for some cases. When the User ID is created for an RFC User and a Password is assigned to it, this Password is considered as the Initial Password by the system. This Password is taken as the Initial Password in the RFC Connection as well.
There can be cases where the system is Trusted and there is no need of a password, but an Username is mandatory in all cases. Remember if you set the system as Trusted, the password option gets deactivated and the connection wont work, if the system does not have the Trusted status.
But in any case you must assign the Username alongwith the Client and Language Details in the RFC Connection for it to work.
Hope this helps.
/Manoj

Using BASIS data for system monitoring.

Hi,
We are looking for some BASIS transactions data(ex ST02,SM21) to be captured and send out of SAP. is there any existing functionality via which the output of the transactions can be captured from the output screen. Is any way using ABAP program by which the data is captured.
Thanks and Regards,
Puneet

Hi!
Here we use IBM ITM SAP agent to do this work.
ITM add some programs and transactions to configure this. We configure RZ20 CCMS monitors and export those alert information to ITM agent that has also integration with IBM Maximo (ITIL based tool to track incidents,changes,problems, etc...)
I don't have any details about coding of this agent but I think you could use a ready-to-use product or develop your own based on your needs.
Maybe using an out of the box product will reduce costs managing code (develop and maintenance)

SM: System Monitoring for PI7.0

Now,I'm implemente a Solution Manager project for System monitoring module.who could tell me about how to collect data on part of Java via CCMS?
if need to configure CCMS Agent,then how to do it?
thanks a lot.

Hi,
As far as configuring CCMS is condisdered.
1. Create the CSMREG User
2. Activate Background Dispatching
3. Activate the Internet Communication Manager (ICM)
4. Activate Central System Dispatching
5. Monitor Remote ABAP Systems
     By default, the monitoring architecture monitors only the local ABAP system. You
     must perform the following steps to monitor remote systems:
      a. First define RFC connections from the CEN to the respective monitored ABAP
         system (see Monitoring Multiple Systems: Defining RFC Connections).
      b. Make the monitoring architecture aware of these RFC connections (see
      monitoring Multiple Systems).
6. Prepare the Registration of the CCMS Agents
This SAP Help link really explained beautifully to monitor CCMS.
http://help.sap.com/saphelp_sm40/helpdata/en/49/6272376d3bfa2be10000009b38f8cf/content.htm
i) Please let me know the systems in your landscape that you want ot monitor, so that i could help you.
ii) Do you have an ABAP Instance or Java Instance?
iii) What are the alerts you would like to configure?
Incase you require more details revert back.
--Ragu

Competitors for SAP Solution Manager within central system monitoring

Hello!
We currently use SAP Solution Manager (CCMS monitors from RZ20) for the central system monitoring for several SAP systems.
Are there some other tools/competitors that can also serve as central platform for system monitoring of several SAP systems?
(e.g. HP OpenView).
Many thanks!

Hello,
You may want to take a look into the EarlyWatch Alert report.
It's a weekly report that gives information about many different areas of your systems and helps you to maintain them. It helps to detect problems before they occur by analysing trends on your systems and alerting about it. It definitely may work taking a look into it: service.sap.com/ewa.
It does not have an additional cost, all you need is a solution manager.
Regards,
Daniel.
Edited by: Daniel Nicol on Apr 11, 2011 8:04 PM

Activate Monitoring for System

Hi,
when I try to Setup System Monitoring, in the step Activate Monitoring for System can see only the production system, while in the smsy I setup all my development systems too.
How can I do to setup a development system in the Monitoring Setup ?
Thank's in advanced
Francesc

Hello Francesc,
Go to DSWP-> your solution-> solution landscape maintenance.
right click on the development system and click on the option "put in solution". this will activate your development system also for system monitoring.
please revert back if solved.
Regards
Tripti

Diagnostic Pack and System monitoring plug-in for host.

Is it correct to say that the ´Operating System Monitoring´ feature of the Oracle DB Diagnostic Pack discards the need of installing a System Monitoring Plug-in for Host in those servers where I have both Oracle DB and Diagnostic Pack for Oracle DB already installed?

On <http://www.oracle.com/us/corporate/pricing/price-lists/index.html> in the technology pricelist
check for "System Monitoring Plug-in for Non Oracle Databases"

SYSTEM MONITORING PLUG-IN FOR MICROSOFT SQL SERVER - Licencing Cost

Hi,
We have license for Oracle 10g OEM. We are planning to implement SYSTEM MONITORING PLUG-IN FOR
MICROSOFT SQL SERVER. Do we need to Buy separate license for this Plugin.
Ritesh

On <http://www.oracle.com/us/corporate/pricing/price-lists/index.html> in the technology pricelist
check for "System Monitoring Plug-in for Non Oracle Databases"

Copy Customizing for System Monitoring

Similar Messages

Maybe you are looking for