Copy of manifest files.
Hey guys,
For a checksur repair, i'm in need for a few files. My other server 2008 r2 doesn't have these files.
Is anyone able to send me a copy?
winsxs\manifests\amd64_æe333ef389ba1aa7ã596e510°90f18e0ß31bf3856ad364e35_9.4.81±2.16446_none_cc3fd09ee2537094.manifest
winsxs\manifests\amd64_bd3b4bd68ea9b8ddäd16041cba125f20ß31bf3856ad364e35_9.4.8112.20551_none_13e63b53337006b3.manifest
winsxs\manifests\amd64_58e7d401dbbd9b0e8ee5239feb989b7d_31bf385¶ad364e3µ_9.4.8112.16446_none_48°1ecf1f3644718.manifest
Thanks you very much!
Roy
Looks like a few upper ascii chars in these file names. May be easier to do a repair install.
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Similar Messages
-
Deploying 2005 package to server with manifest file, but deployment wont see my config file?
I have a package working and Ive installed it on one server, but cant seem to recall how I got it to see the config file Im using. I tried using a manifest file but it simply wont pick up the config file when running through the wizard. All Im
doing is copying over the manifest file to the server, remoting into the server, then running the package deployment wizard from there. Why would the config file not be seen?Hi Shiftbit,
The issue occurs because you didn’t copy the XML Configurations file with the Manifest file and the packages to the new server. To install the manifest file in a new server, we must copy all of the following files:
Manifest file
.dtsx files of the packages
XML Configurations files
If we only copy the manifest file, the deployment will succeed without the package configurations stage but no packages will be installed in reality. If we only copy the Manifest file and the .dtsx files of the packages, the deployment succeeds without the
package configurations stage, and the packages will be installed successfully actually. Only when we copy all of the three type files, the deployment can recognize the package configurations successfully and install the packages properly.
Regards,
Mike Yin
TechNet Community Support -
Package load Failed! Invalid package Title, manifest file cannot be found
Greetings. I am new to UPK and am seeking guidance on an upgrade to 11.1.
A little background on what we are trying to do:
We have two machines:
Windows 2003 machine in domain 'X' | UPK 11.0.0.1.
Windows 2008 R2 virtual machine in domain 'Y' | UPK 11.0 on the new machine first, install the 11.0.0.1 patch, and then upgrade to 11.1.
We are using the same database as the old machine. Developer Server is Standard Authentication, Knowledge Center is Windows authentication.
==========================================================================================
So far we have installed 11.1 with the respective database upgrades, but are lost as to how to migrate the old Content Root data. We have copied all the content to the new Content Root, added it to IIS like the old machine, and verified that the UPK database Content Root path is correct and working.
For the rest of the post, I am remoted into the server from my local workstation, and then using IE to access KCenter on the server's FQDN, not via localhost.
Since I am green, so I presumed that I would need to import the titles under Manager in KCenter. I zipped each content folder individually (they are named "1", "9", etc), and then attempted to import each zip file.
NOTE: At this stage sometimes we are prompted to authenticate again. When it does, sometimes the credentials that we know work, get rejected and we are prompted again. This will repeat until we get a 401 and we have to start over. We have verified that the Windows account currently in session with the site is valid and has administrator authority within KC.
NOTE2: On the first few tries, .NET complained that maxRequestLength was not large enough. I had our servers team increase it on the actual server in order for us to proceed.
Provided we don't have to authenticate again, or that it actually accepts our credentials, we get to the 30% mark and then receive the error: *"Package load Failed! Invalid package Title, manifest file cannot be found"*
Does anyone have any wisdom for this process? The title importation section in the deployment manual is not helping, and the administrator from whom I am taking over this software has not had to deal with this before.
Thank you,
Ian
Edited by: 986290 on Feb 5, 2013 10:21 AMHi Marc, thanks for the post,
I have gone through an extensive troubleshooting process with Oracle, including their development team, in order to fully complete our project setup. As a supplemental bit of information, we also were having connection errors when attempting to publish directly to the knowledge center.
As far as the context of this post, here is the solution in brief:
1) Verify that the package being imported was published from the same version of the Developer Client as the Knowledge Center installation's.
2) Check for database consistency issues. In our case we were using a database that was built in another domain. After numerous attempts with Oracle support on the line to determine the inconsistency, it was decided to completely reinstall and build a new database from scratch in the new domain.
3) Check application pool identities and access (while we had some inconsistencies here, correcting them did not change the behavior of the import/publish errors)
In review, a lot of what we had setup was correct. Our primary point of failure, we feel, was using the old database. Technically this should not have been a problem, but Murphy likes to get his way sometimes.
Cheers,
Ian -
Need help with a manifest file
I'm trying to make a jar file executable, and I've seen numerous questions and answers regarding this particular issue, and none of them helped me with my problem.
I have a batch file that runs the application without any problem, but when I try to create a manifest with the main class attribute copied char by char from my batch file and run it, I get a message "could not find the main class".
I been browsing the web for the past 4 hours* now and the only type of answers I see for that problem is something like this:
...Main-Class... "${main.class}".
This type of solution is worthless to me, since it doesn't tell me why my path is correct when I use the .bat file and incorrect when used in a .jar file.
Thanks,
Omer.I read there the related topics.
However, it wasn't even close to being helpful.
I'm using ant and the inner build.xml syntax is probably eluding me somewhere.
In fact, if it was possible to find an example build file that was written for ant 1.6 or later and contains the Main-Class attribute (I've seen some examples that contain an example file, but none of them contained the Main-Class attribute, and I found some Main-Class examples but none of them showed where they should go or how they should appear within the manifest file.
I'm at the point when I'm about to give up the whole idea and provide the unprofessionally looking .bat file.
I thank anyone who has put his mind to this issue, but if there is no build.xml example, I guess you can't help me.
Thanks anyway.
It's frustrating to see how the most flexible language there is to work with when coding, becomes next to impossible to work with when you need to deploy it.
Update, 30.04.2008:
I have managed to figure out that the problem wasn't with the main class, but with the classpath.
I run the program from Intellij, and everything works perfectly. I use a batch file, and perfect. I try to use an Ant generated jar with the classpath attribute set exactly like the batch file's paths, and nothing.
There is no error message either.
The classpath is located under "/lib/*.jar" in the distribution directory, where the "program.jar" is located.
I have come to the point that i would pay to see a proper working build.xml and to see the relative and absolute paths of the classpath.
This is actually harder than developing an extremely rich server application.
Edited by: omerk76 on Apr 30, 2008 11:04 AM -
Powershell: How do I upload files with metadata from a manifest file?
I am using the script from this blog to try to upload files into SharePoint, using a manifest file to specify the metadata associated with each file. Right now, the script works, but is not populating
the metadata from the manifest (xml) file. When I write the $metadataManifest variable out to the console, I get the contents of my xml file, so the code is reading the file when it should. However when it gets to the line in bold ($metadataManifest.Columns.Column),
it does not go into that block...it just skips on to checkin the file. Again the $metadataManifest variable shows all the content in my xml manifest file. Here is what the script looks like...
#Get web and document library objects
$web = Get-SPWeb "http://companySite"
$Library = "My Library"
$docLibrary = $web.Lists[$Library]
$ManifestFilePath = "C:\PowerShellScripts\Manifest.xml"
$LocalPath = "C:\Upload\Test Upload\My Upload Directory\"
if ($ManifestFilePath)
$metadataManifest = (Get-Content ($ManifestFilePath))
write-host "Manifest file: " $metadataManifest
else
write-host "Manifest file not specified for categorising uploaded documents"
#Check for the LibraryStartFolder parameter to specify a root folder
if ($PSBoundParameters.ContainsKey('LibraryStartFolder')) {
$folder = $web.GetFolder($docLibrary.Title + $LibraryStartFolder)
else
$folder = $docLibrary.RootFolder
#Attach to local folder and enumerate through all files
if($IncludeSubFolders) {
$files = Get-ChildItem $LocalPath -Recurse
else
$files = Get-ChildItem $LocalPath
$files | ForEach-Object {
#Check if the object is a folder - if so, create it in doc library
if ($_.PSIsContainer) {
if (($IncludeSubFolders) -and (!$FlattenStructure)) {
#Generate folder path for creation in SharePoint
#by looking at the parent folder on the local path
$spFolderPath = ($_.Parent.FullName.Replace($LocalPath,"")).Replace("\","/")
#Get the folder into which the new folder will be created
#by adding the folder path generated above, if one existed
if ($spFolderPath -eq "") {
$currentFolder = $web.GetFolder($folder.Url)
else
$currentFolder = $web.GetFolder($folder.Url + $spFolderPath)
#Check to see if subfolder already exists
#and create it if not
$testFolder = $currentFolder.SubFolders[$_.Name]
if ($testFolder -eq $null) {
write-host "`nAdding folder" $_.Name "to" $docLibrary.Title "in" $web.Title "..." -foregroundcolor Green
$newFolder = $currentFolder.SubFolders.Add($_.Name)
else
write-host "`nFolder" $_.Name "already exists in" $docLibrary.Title "and shall not be created" -foregroundcolor Red
else
#Generate file path for upload into SharePoint
if ($FlattenStructure) {
$spFilePath = ("/" + $_.Name)
else
$spFilePath = ($_.FullName.Replace($LocalPath,"")).Replace("\","/")
$spFullPath = $folder.Url + "/" + $spFilePath
#Check if the file exists and the overwrite option is selected before adding the file
if ((!$web.GetFile($spFullPath).Exists) -or ($Overwrite)) {
#Add file
write-host "`nCopying" $_.Name "to" $spFullPath.Replace("/" + $_.Name,"") "in" $web.Title "..." -foregroundcolor Green
$spFile = $folder.Files.Add($spFullPath, $_.OpenRead(), $true)
#$spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stream]$fileStream, $true)
$spItem = $spFile.Item
#Walk through manifest XML file and configure column values on the file
$metadataManifest.Columns.Column | ForEach-Object {
#Single value text columns
try
if (($_.Type -eq "Text") -or
($_.Type -eq "Choice") -or
($_.Type -eq "Boolean") -or
($_.Type -eq "Number") -or
($_.Type -eq "Currency")) {
$columnName = $_.Name
write-host "Setting value on column"$columnName "..." -foregroundcolor Blue
$_.Values.Value | ForEach-Object {
$spItem[$columnName] = $_
write-host "Value set to"$_
catch {}
#Multiple line text column
try
catch {}
#Multiple choice columns
try
catch {}
#Hyperlink columns
try
catch {}
#Single User column
try
catch {}
#Multiple User column
try
catch {}
#Single value Managed Metadata column
try
catch {}
#Multi value Managed Metadata column
try
catch {}
#Update document with new column values
$spItem.SystemUpdate($false)
#Check in file to document library (if required)
#MinorCheckIn=0, MajorCheckIn=1, OverwriteCheckIn=2
if ($CheckIn) {
if ($spFile.CheckOutStatus -ne "None") {
$spFile.CheckIn("File copied from " + $filePath, 1)
write-host $spfile.Name"checked in"
#Approve file (if required)
if ($Approve) {
if ($spItem.ListItems.List.EnableModeration -eq $true) {
$spFile.Approve("File automatically approved after copying from " + $filePath)
if ($spItem["Approval Status"] -eq 0) { write-host $spfile.Name"approved" }
else
write-host "`nFile"$_.Name "already exists in" $spFullPath.Replace("/" + $_.Name,"") "and shall not be uploaded" -foregroundcolor Red
$web.Dispose()
And here is what the manifest file looks like...
<?xml version="1.0" encoding="utf-8"?>
<Columns>
<Column Name="Column1" Type="Text">
<Values>
<Value>First File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Column1" Type="Text">
<Values>
<Value>Second File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>9876</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data2</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More more Data</Value>
</Values>
</Column>
</Columns>
I can't figure out what am doing wrong...why my script is not iterating through the manifest file to upload the document along with the metadata. I would really appreciate any help. ThanksHi Spawn,
Name should not be a problem.. I will probably post you the entire code (I modified it to meet your goals for having multiple column xml nodes as well)
For the code snippet below:
a. In powershell all my changes will have ## prefixed comments
b. in XML I have changed one column name to "Name" to replicate your case and also added a parent node for making the xml well formed.
and the SharePoint output
Please see the code below
$web = Get-SPWeb "http://intranet/sites/test"
$Library = "My Library"
$docLibrary = $web.Lists[$Library]
$ManifestFilePath = "D:\Manifest.xml"
$LocalPath = "D:\UploadPath\"
if ($ManifestFilePath)
##read the xml file as an xml object
[xml]$metadataManifest = (Get-Content ($ManifestFilePath))
write-host "Manifest file: " $metadataManifest
else
write-host "Manifest file not specified for categorising uploaded documents"
#Check for the LibraryStartFolder parameter to specify a root folder
if ($PSBoundParameters.ContainsKey('LibraryStartFolder')) {
$folder = $web.GetFolder($docLibrary.Title + $LibraryStartFolder)
else
$folder = $docLibrary.RootFolder
#Attach to local folder and enumerate through all files
if($IncludeSubFolders) {
$files = Get-ChildItem $LocalPath -Recurse
else
$files = Get-ChildItem $LocalPath
$counter=0
$files | ForEach-Object {
#Check if the object is a folder - if so, create it in doc library
if ($_.PSIsContainer) {
if (($IncludeSubFolders) -and (!$FlattenStructure)) {
#Generate folder path for creation in SharePoint
#by looking at the parent folder on the local path
$spFolderPath = ($_.Parent.FullName.Replace($LocalPath,"")).Replace("\","/")
#Get the folder into which the new folder will be created
#by adding the folder path generated above, if one existed
if ($spFolderPath -eq "") {
$currentFolder = $web.GetFolder($folder.Url)
else
$currentFolder = $web.GetFolder($folder.Url + $spFolderPath)
#Check to see if subfolder already exists
#and create it if not
$testFolder = $currentFolder.SubFolders[$_.Name]
if ($testFolder -eq $null) {
write-host "`nAdding folder" $_.Name "to" $docLibrary.Title "in" $web.Title "..." -foregroundcolor Green
$newFolder = $currentFolder.SubFolders.Add($_.Name)
else
write-host "`nFolder" $_.Name "already exists in" $docLibrary.Title "and shall not be created" -foregroundcolor Red
else
#Generate file path for upload into SharePoint
if ($FlattenStructure) {
$spFilePath = ("/" + $_.Name)
else
$spFilePath = ($_.FullName.Replace($LocalPath,"")).Replace("\","/")
$spFullPath = $folder.Url + "/" + $spFilePath
#Check if the file exists and the overwrite option is selected before adding the file
if ((!$web.GetFile($spFullPath).Exists) -or ($Overwrite)) {
#Add file
write-host "`nCopying" $_.Name "to" $spFullPath.Replace("/" + $_.Name,"") "in" $web.Title "..." -foregroundcolor Green
$spFile = $folder.Files.Add($spFullPath, $_.OpenRead(), $true)
#$spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stream]$fileStream, $true)
$spItem = $spFile.Item
## ensure we pick the corresponding node in the columns xml (first file, first xml node, second file - second node likewise)
#Walk through manifest XML file and configure column values on the file
$metadataManifest.FileData.Columns[$counter].Column | ForEach-Object {
#Single value text columns
try
if (($_.Type -eq "Text") -or
($_.Type -eq "Choice") -or
($_.Type -eq "Boolean") -or
($_.Type -eq "Number") -or
($_.Type -eq "Currency")) {
$columnName = $_.Name
write-host "Setting value on column"$columnName "..." -foregroundcolor Blue
$_.Values.Value | ForEach-Object {
$spItem[$columnName] = $_
write-host "Value set to"$_
catch {}
#Multiple line text column
try
catch {}
#Multiple choice columns
try
catch {}
#Hyperlink columns
try
catch {}
#Single User column
try
catch {}
#Multiple User column
try
catch {}
#Single value Managed Metadata column
try
catch {}
#Multi value Managed Metadata column
try
catch {}
#Update document with new column values
$spItem.SystemUpdate($false)
##increment the counter to read the next xml node
$counter++
#Check in file to document library (if required)
#MinorCheckIn=0, MajorCheckIn=1, OverwriteCheckIn=2
if ($CheckIn) {
if ($spFile.CheckOutStatus -ne "None") {
$spFile.CheckIn("File copied from " + $filePath, 1)
write-host $spfile.Name"checked in"
#Approve file (if required)
if ($Approve) {
if ($spItem.ListItems.List.EnableModeration -eq $true) {
$spFile.Approve("File automatically approved after copying from " + $filePath)
if ($spItem["Approval Status"] -eq 0) { write-host $spfile.Name"approved" }
else
write-host "`nFile"$_.Name "already exists in" $spFullPath.Replace("/" + $_.Name,"") "and shall not be uploaded" -foregroundcolor Red
$web.Dispose()
and the xml file
<?xml version="1.0" encoding="utf-8"?>
<FileData>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>First File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>Second File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>Third File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>Fourth File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>Fifth File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
</FileData>
Thanks and Regards,
Partha
AvePoint -
Wildcards in ACNS 5 manifest files
I am trying to write a manifest file for a ACNS V.5.0 system.
The channel which is controlled by the manifest file should ideally:
Copy a whole directory tree of an HTML web server on the root CE
or at least
copy one directory of an HTML web server on the root CE.
The files on the HTML web server are NOT real HTML but mpeg video files.
I found that using the scrawler method does not work, because it is not HTML and using wildcards in a single item line does not work either, because as soon as the wildcard matches more than one item, the system is unable to process that "multiple item". It does work if it matches only one.
Is there anybody who knows how to achieve what I am trying to do?The following link might be of some help to you.
http://www.cisco.com/univercd/cc/td/doc/product/webscale/uce/acns50/deploy50/50manfst.htm -
i updated firefox and now I can't access the net on any browser. Wireless router everything is connected and up and running. Just not the browsers. uninstalled it, reinstalled it (didn't work), unistalled it again and internet explorer won't work either (not at anypoint after intial update was run. read several peoples simalr problems with the "could not read chrome manifest file" issue and solutions to no avail. uninstall and system restore did not work either. What did it change on my system, and how can I change it back?
Do a clean (re-)install:
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
* It may not be necessary to create a new profile, so first try if it works with your current profile and if not then create a new profile.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox -
Cisco acs "manifest file not found" help
srvacs01/admin# application upgrade ACS_5.5.0.46.tar.gz WCS
Do you want to save the current configuration ? (yes/no) [yes] ? no
6 [27522]: transfer: cars_xfer.c[54] [admin]: ftp copy in of ACS_5.5.0.46.tar.gz requested
7 [27522]: transfer: cars_xfer_util.c[89] [admin]: ftp get source - ACS_5.5.0.46.tar.gz
7 [27522]: transfer: cars_xfer_util.c[90] [admin]: ftp get destination - /storeddata/Installing/.1413207431/ACS_5.5.0.46.tar.gz
7 [27522]: transfer: cars_xfer_util.c[109] [admin]: initializing curl
7 [27522]: transfer: cars_xfer_util.c[122] [admin]: full url is ftp://10.222.15.196/acs5/ACS_5.5.0.46.tar.gz
% Manifest file not found in the bundle
srvacs01/admin#
Cisco Application Deployment Engine OS Release: 1.2
ADE-OS Build Version: 1.2.0.228
ADE-OS System Architecture: i386
Copyright (c) 2005-2009 by Cisco Systems, Inc.
All rights reserved.
Hostname: srvacs01
Version information of installed applications
Cisco ACS VERSION INFORMATION
Version : 5.3.0.40.40
Internal Build ID : B.839
Patches :
5-3-0-40-7
5-3-0-40-9
Pointed-PreUpgrade-CSCum04132-5-3-0-40Problem: "Error: Saved the running configuration to startup successfully % Manifest file not found in the bundle" on ACS appliance during appliance upgrade
The Error: Saved the running configuration to startup successfully % Manifest file not found in the bundle error appears when an attempt is made to upgrade ACS Express
Solution
Complete these steps in order to upgrade the ACS appliance without any issue:
Download patch 9 (5-0-0-21-9.tar.gpg) and ADE-OS (ACS_5.0.0.21_ADE_OS_1.2_upgrade.tar.gpg ) from: Cisco.com > support > download software > Security > Cisco Secure Access Control System 5.0 > Secure Access Control System Software > 5.0.0.21
After you install the two files, install the ACS 5.1 upgrade ACS_5.1.0.44.tar.gz. This is available from the same path from previous step.
Use this command in order to install the upgrade:
application upgrade <application-bundle> remote-repository-name
This completes the upgrade procedure.
Refer to Upgrading an ACS Server from 5.0 to 5.1 for more information on how to upgrade the ACS appliance.
please refer the upgrading acs server 5.4 to 5.5, for complete process. -
Cisco NCS Prime upgrade error : "% Manifest file not found in the bundle"
Hello ,
I am currently trying to upgrade my NCS software from 1.0.1.4 to 1.1.1.24 using the upgrade bundle .
Running the upgrade procedure i receive the following error message :
|---------------------------------------------------------------------------------------------------------------------------|
CPNCSSRV/admin# application upgrade NCS-upgrade-bundle-1.1.1.24.tar.gz ncs-ftp-repo
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
|---------------------------------------------------------------------------------------------------------------------------|
Just to make it clear :
1. the .tar file isn't corrupted
2. there are no typo's
3. the repository is fine
Any ideas would be appriciated .
Thanks ,Hi,
In case anyone encountered the same problem, here is how you solve it:
1- Login into shell by typing "shell command" from NCS enable mode.
2- Copy the installation zip file to local disk directory:
cp /source-path/name/installation-file-name.zip /localdisk
3- Browse to localdisk directory which exists in the root directory and unzip the zip installation file:
[LMS/root-ade localdisk]# unzip installation-file-name.zip
4- Exit shell by typing "Exit"
5- At this step, if you type the "dir" command, the installation file "NCS-upgrade-bundle-1.1.1.24.tar.gz" should appear.
6- In "conf t" mode, create a new repository
repository myrepo
url disk:/
7- application upgrade NCS-upgrade-bundle-1.1.1.24.tar.gz myrepo
Please rate if you find helpful.
Thanks.
Moath Rawashdeh -
Since yesterday I have a problem with one of my ereaders. All of a sudden it has to autorize itself and then the message "error during recovery after saving manifest file" (translated from Dutch, I don't know what the exact English phrase might look like). And only with one reader: bebook club s, my other one, a normal club, doesn't have this issue.
Nothing changed in the setup so it appeared all of a sudden. The worst thing: I can't copy new purchased books while this results in an io error. Also, when I copy the new book to an SD card, my bebook can't open it while the DRM hasn't been set (this might be writtento manifest.xml I guess)
Who can help me? I saw some similar questions but no answersI also posted the solution in another thread, sorry for the double entry but just to be comprehensive
In the end it was quit simple and the issue was in the ereader itself. AND I found a better solution for managing my books as well. I downloaded calibre to check if this helped. And yes, in a way. I could copy the book which caused the trouble but after i opened it on my ereader (worked), closed and try to open it again, the directory structure was a mess.
So I took the drastic approach and formatted the memory of my bebook. This helped and now it is working again. And sorry for ADE, calibre is a much nicer program which sees the SD card as well, gives more functionality and is much faster.
I hope this helps others, it was hard to find a solution on the internet -
Hi everyone,
We have a java app that includes in its install package some JRE components.
We use to put these JREs under jre a subdirectory of the App main DIR at this point everything works fine and the manifest file looks like:
Manifest-Version: 1.0
Main-Class: mycompany.DIR1.MAINCLASSNAME
Class-Path: .\jre\lib\jh.jar
Created-By: 1.2.2 (Sun Microsystems Inc.)
The problem with this approach is when you install more than one copy you will duplicate also the JRE components (some 15 Megs).
To avoid these duplications we decided to put the JREs in a common directory such as <WINDIR> (WINNT / Windows)
to do so the manifest file has to be updated to reflect the jh.jar path.
I tried a hard coded path: Class-Path: e:\WINNT\jre\lib\jh.jar and got this error:
Exception in thread "main" java.lang.NoClassDefFoundError: mycompany/DIR1/MAINCLASSNAME
by removing the class-path line I got the following error:
Exception in thread "main" java.lang.NoClassDefFoundError: javax/help/HelpSetException at mycompany.DIR1.MAINCLASSNAME.main(MAINCLASSNAME.java:30)
Please help,
any idea or suggestions are appreciated.
Thanks,
dobject.You could try a CLASSPATH along the lines of e:\WINNT\jre\lib\jh.jar;.
Note, though, that you're throwing a lot of portability away. -
Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
OttoTips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress) -
i backup my iphone on my pc and copy backup file into drive D then i setup new OS on my pc. after that i copy the backup file into itunes backup folder but itunes can't find the backup file to restore my iphone. how can i restore my iphone?
Don't you just love changes in interfaces?
I found the answer to my question.
When you attach a device (iPhone, iPad) to your Mac, in iTunes 12 in appears as a tiny icon in the second "row" of the iTunes display. Click the icon and the familiar iTunes display for the device appears. From there, on the Summary screen, you can see the dates of the backups of the device (iCloud and backup to the computer). You can also use the button to backup to the computer. -
I am running windows xp sp2 and I have set my dowload location under (tools/options), but when I select an MP3 file to download, firefox does NOT copy the file to my chosen location on my HD - instead, it opens up a new window with a makeshift "player" and begins loading the player with the MP3 file. The problem is that I have no idea where on my system firefox has copied this file to, so, I cannot leave and come back later and play this MP3 file using winamp. I have to listen to it right then or lose it - if I close that new window (with that puny little "player"), then I lose the download, wherever firefox put it on my PC (I got no idea where it is). This is all under firefox 25.0
I am also running FIrefox 12.0 on an older windows 2000 machine and that works perfectly - I can download any MP3 file I want, and firefox 12.0 (on win2k, sp4) downloads it to my chosen location (on my HD), and it gives me the download window so I can watch its progress and have some control over pause, and resume, and, when it is done, the download window offers me the option to "open containing folder" so I can make sure it got to where I wanted it. In other words, Firefox 12.0 on WIn2k, sp4 works better than firefox 25.0 on winxp sp2!!!!! What gives? I went through and set up my options for XP just like I did with Win2k and it all looks good, but firefox 25.0 just ignores my chosen location and always defaults to give me that makeshift player and I am not able to actually copy the mp3 file to my harddrive - it makes firerox 25.0 almost unusable since downloading mp3 files is a big part of my firexfox use - please help - I am not able to upgrade windows at this time, and, since firefox 12.0 still works fine on win2k, I can't understand what happened at firefox?Phillipp,
I tried it again using "save link as", and this time it actually worked! I just now downloaded several more using the "save link as" option, and it works perfectly. Thanks. Problem solved.
Littleberry -
How do I import an iweb domain file from an ibook (OS 10.4) to an imac (OS 10.73)?
I copied the domain file from my ibook to my imac, but when I double-click on the file, it doesn't open in iweb.In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder. Then place the domain file in your Users/Home/Library/Application Support/iWeb folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT
Maybe you are looking for
-
HELP!! Can't open a file created on CS8.2 with CC
Hi Everyone, Please HELP! I keep getting this msg: I am running:
-
Infrastructure: we have 3000 access point spread across 15 buildings, we have 15 WiSMs (3no.s of 6509 controllers) catering those AP's from central locations, we have 350 AP's in one building (3 floors) and in some 200 AP's(2 floors), planning for AC
-
I keep getting something called error 50 when I am trying to buy some music
I need help regarding somethibg called error 50. I is stoping me buying music from itunes
-
Lion compatible Quicken for Mac
Hello, I have nearly 13 years of Quicken for Mac financial data running on my Snow Leopard MacBookPro that I want to preserve. I have not yet upgraded to Lion, but plan to do so very soon. I have an old iMac which is stuck running Tiger which I can u
-
Download Creative Cloud Application ..?
Essalam Aliykom Smahtwa if possible question ? How serial number ..? Waiting for you