Copy Screen Layouts across users?

Hello All,
Is it possible to copy the screen layouts designed for one user to be copied to another user? We have made lot changes in the way the Purchase module screen looks through Form Settings for one user and we would like to know if the final layout is copied to other users so that the work is not duplicated.
Thanks and regards,
Bharath S

Hi Bharath,
It is possible. you can use SAP B1 2007A SP01 PL12. The functionality is available in the module administration --> setup --> general --> users setup --> copy form settings. you can open one user setup that you want its layout designed by open it user setup form and then click copy form settings. The window copy form settings to users window appears and you can select the user you would like to have the same layout designed.
you can also user query as follows:
CODE SNIPPET REMOVED AS IT CONTAINS UPDATE/INSERT STATEMENTS-
but the query only apply to copy to one user. You must do the copy either using user setup window or query after all users log out from B1.
JimM
Edited by: Paul Finneran on Nov 8, 2010 12:54 PM

Similar Messages

How to copy screen layout of Info Record

Hi Experts
I need to copy the screen layout:info records from standard ME12 to ZME12.
Please let me know how can i do the same.
Thanks
Regards
Naresh

Hi Naresh,
I really do not understand your Requirement for new screen layout create ZME12.
I really want to ask you how it would be usefull to you.
Normally, the screen Layout would be Created on Based of the below
1     Document Type
2     Transaction Code
3     Release Indicator
so if any of the above is applicable then there is Chance of Creation of Screen layout
For the info record,i believe there is only the T code that is Applicable and nothing comes into the affect
Hope so i am Clear .
Regards
Anjanna

FB60 User freindly screen layouts

Dear all
We have following requirement from client. Your advices highly appreciated here...
At T.Code FB60 "Enter Vendor Invoice......" SAP standard screen provides Vendor details section at top and GL line items section at bottom as a table. I know how to modify fields at GL line item table with the help of "Screen and Transaction variants".
However, at Vendor details screen tabs. there are total 5 tabs available for different information (like Basic data, Payment, Details, Tax and Notes). At present client uses very few feilds of all these tabs.. like 5 feilds at Basic data, 2 feilds at Payment tab, one feild at Details tab and so..
User need to go to each tab separately to enter these feilds and there are many other feilds where users never enter data.
Client requirement is make invisible all un-used feilds and provide all feilds which are frequently used at one screen instead of seperate tabs.
We have knowledge that this requirement can be met with the help of "GUIXT " product. but, client is not ready to use GUIXT product here.
Can you help me, is there any other way of meeting this requirement ?
Thanks in advance for all your feedback and help.
best reg
S. Habib Pasha.

Hi,
Please use the account group with screen layout for vendors to define which filed is required/invisible or not.The path to make the changes is
SPRO:Sap reference IMG: Financial Accounting: Accounts Receivable and Accounts Payable: Vendor Accounts: Master Data: Preparation for creating Vendor Master Data: Define Accounts Group with Screen Layout.
Regards,
Bharath.

User Specific Screen Layout in FB50

Dear Friends,
We are trying to change the sequence of fields in FB50 for a specific user.
Earlier there was an option in to change the screen layout, it was a variant sign on the right hand top side of screen but It is not there in the FB50 screen.
SHD0 does this setting for all the user ?
Is there any way to achieve this for a specific user .
Thanks,
Sapan

Hi Sapan
Mostly it was auth object S_ADMI_FCD with Actiity TCTR for Administrator Function for Table Control Settings
This should resolve hopefully, share the feedback and close the thread incase it does
Br. Ajay M

Start Screen Layout not applying to every user

Ok, i'm stuck. I have a 2012r2 DC with a 2012r2 terminal server. I exported the xml file to be the start screen layout and have it applied to a specific user OU with my two users in it. One gets the layout the other does not (metro
layout btw) Same users, same permissions, in the same OU. Tried to gpupdate with no luck, the only difference I can tell is one users existed and the other I created brand new to test with.
User config - policies - admin templates - start menus & taskbar - start screen layout
this OU is blocked from inheritence for testing purposes. I have also deleted all references to the non-woking user locally on the server and tried to re-login. No dice.
Idea's on what I am missing?

Hi wlords,
Thanks for your sharing!
In addition, I would like to share with you a useful post which can help us to troubleshoot group policy application issues:
Common steps to start troubleshooting Group Policy application issues
http://social.technet.microsoft.com/Forums/en-US/382c97e8-93c8-4022-b8fe-22401037d14c/forum-faq-common-steps-to-start-troubleshooting-group-policy-application-issues?forum=winserverGP
Regards,
Lany Zhang

Screen layout for pr and PO in respect to Material master

Dear Experts,
I know that we can control the screen layout display, optional... with respect to document type...
But there is one requirement... When there is BATCH activated for the material... in Material master( batch avl) the "batch" field in PR.....Item details >Material Data needs to be optional field.. (possible to enter value)..
When material is not not acivated for batch.. then that field to be Display only(Not possible to enter value)
pls guide me is this possible.. ?

Hi,
This can be done with both customizing and specific developpement.
In SPRO: Materials Management/Purchasing/Purchase Order/Define Screen Layout at Document Level, you can define new fieldselection key (allways define new one as copy of standard in order to copy the document type).
Then you can define your own strategy to assign fieldselection key to a purchase order item in BADI ME_PROCESS_REQ_CUST method FIELDSELECTION_ITEM_REFKEYS according to the item data
This user exit allows you to had new fieldselection keys.
- CH_KEY0 is used for the transaction (in ME51N the fieldselection key is ME51N)
- CH_KEY1 is used for the activity (in creation mode the fieldselection key is AKTH)
- CH_KEY2 is used for the document type (defined in customizing for each document type)
- CH_KEY3 is used for the line type (if the item type is standard the fieldselection key is PT0B)
- CH_KEY4, CH_KEY5 and CH_KEY6 are free to use
Keep in mind that the system take the union of all fieldselection key. If a field is changeable in fieldselection ME52N and PT0B but not in AKTH then it will not be changeable.
Hope it helps
Regards

KB3000850 Breaks Start Screen Layout Tiles

Hi All,
I have a problem which is a direct cause of KB3000850, this affects both 64bit and 32bit variants.
We use GPO to apply a start screen layout xml file to our users.
On a PC without KB3000850 it works fine, however if you install this update it breaks the layout.
I've read online a couple of other instances of this, but no concrete fix.
Any ideas?
Thanks
Andy
PS - incidentally, this issue is reintroduced by the December Rollup KB3013769

Hi,
Just in case anyone trips over this post after having this issue and not finding the answer.
Here it is, it took a paid support call to MS but the answer is......... it's by design.
The key part here is Windows 8.1 Professional vs Windows 8.1 Enterprise
Prior to these updates, the policy to apply start screen layout via policy worked on Professional and Enterprise.
The fact it did work on Processional was a BUG, it was ONLY intended to work in Enterprise.
The update rollups fix the bug, and hence break a previously working solution for 8.1 Professional users.
The fixes are either the workaround I noted above (copying in file) or changing to 8.1 Enterprise.
Just an additional note on my workaround, if you are using a login script to copy the file, do it is a logoff script instead. The reason is that if you have it as a login script and a brand new user logs in, the profile creation process has a bit of a fit
as you have copied in part of a profile, so instead of seeing the 'Hi...... We're setting things up for you.....' part, the PC just sits for about 5-10 mins and then eventually logs in.
If you set it to a logoff script then the login processes normally, even for brand new users, and the file copies without a hitch on logoff. It takes an extra login for brand new users to see the screen layout but hey, its better than a 10min first login.
So, no fix from MS, as the fix is the reason for the break in functionality.
Yes, by the letter of the policy it is correct, but we have been robbed of a perfectly working piece of functionality that some people may have been using extensively.
Thanks

Screen Layout Field in the Asset Master Record

What is the use of the screen in the asset master record, ANLA-FELEI?
We have some assets where there are different values between this screen layout and the screen layout defined at the asset class (i.e. through configuration).
It seems the one defined within the asset class takes precedence.

HI
Scree Layout controls the diplay of fields, it may not be necessary for a user to use all the fileds provided by SAP. Hence the options like Required, Optional and Suppress are used to control the screen diplay and the TABs to be displayed based on the need.
Asses within the same class will have same fields since the screen layout are assigned to an Asset class.
Scree layout for the Tab Depreciation Area can also be controlled with the screen layout defied for the Depreciation Area. With this one can have different screen layouts per dep. area.
Hope i'm clear to you.
Thanks,
Vijay

I have an iMac 2013 running OSX 10.9.4. I want to use Carbon Copy Cloner to backup user files to an external hard drive. Then I want to remove iPhoto libraries from iMac. What will happen to the iPhoto libraries that I back up when I run backup in a

I have an iMac 2013 running OSX 10.9.4. I want to use Carbon Copy Cloner to backup user files to an external hard drive to free up space on my iMack Hard drive.
So, say I make the backup today, delete iphoto libraries from my iMac, and then backup my iMac in a week. What happens to the iphoto libraries that are on the external backup drive now that I am backing up the iMac where they no longer exist?
I will have them backed up to a separate second external drive as well.
I'm just very cautious about removing them from the hard drive.
Thanks for helping and understanding my crazy caution!

I'd like to store my Aperture /IMovie Libraries on an external hard drive.
That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
You must have backups on a different disk .. otherwise it is pointless.
Can I set up a RAID 5 format for redundancy?
No.. you can buy special USB and Thunderbolt external drives that support RAID..
BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
Raid will corrupt all copies of the files.. it is replicated across all disks.
Delete a photo it is deleted across all disks.. you have no recovery.
Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

Need help with Responsive HTML5 screen layout in RoboHelp HTML 11

I have a few questions/issues regarding screen layouts for Responsive HTML5 output in RoboHelp HTML 11.
First off, I decided to just use the Theme1_Standard layout that came with the program (only other default option was Theme2_Government) and started customizing the layout. I originally added a company logo to the 'Header' component in the Customization dialog, but have since decided to remove it. I can't seem to do this from the dialog, so I tried just deleting the image file from the whole project. The file is gone, but the logo is still there. This is only displayed in the header when a topic is displayed, it does not appear in the header at the TOC, Index, Search screen, etc. How do I get rid of this???
Secondly, the text in the header for the topic screens appears differently than the one on the screens for the TOC, Index, Search, etc. In the former of these, the header is displayed in maroon text in a much smaller font, similar to that used in the topics. In the latter, the topic is displayed based on what I configured in the Layout Customization dialog; much larger in white text on a black background. In each case the heading text serves as a link to the default display topic shown when the help file is launched, which is fine. However, how do I get the header to be consistent across all screens (topics and TOC, Index, etc. alike)???
As a result of these issues with the Theme1_Standard layout, I'm trying to import a different Responsive HTML5 screen layout than the two provided within RoboHelp HTML 11 (Standard and Government). I did some digging in the program help and found another layout I'd like to use (Theme3_Black.zip) at RoboHelp screen profiles and layouts. I tried importing the new layout, but it's looking for a .SLZ file and the only one in the files that came with the ZIP file is SLZConfig.xml, and I don't think that's what I need, though quite honestly, I don't know.
I extracted the contents of the ZIP folder to a folder in the !ScreenLayout! folder within the RoboHelp project, but when I open the project, I don't see Theme3_Black as an option. I need to figure out how to import this screen layout because the color scheme matches the one used in the program for which I am writing the help. How do I import and apply this other screen layout???
Any tips, tricks, or guidance on any or all of these items would be GREATLY appreciated.
Thanks much in advance,
Dave

Item two of the original post is also something I am having issues with:
"Secondly, the text in the header for the topic screens appears differently than the one on the screens for the TOC, Index, Search, etc. In the former of these, the header is displayed in maroon text in a much smaller font, similar to that used in the topics. In the latter, the topic is displayed based on what I configured in the Layout Customization dialog; much larger in white text on a black background. In each case the heading text serves as a link to the default display topic shown when the help file is launched, which is fine. However, how do I get the header to be consistent across all screens (topics and TOC, Index, etc. alike)???"
We have the text toggle between red, white and blue depending upon the topic selected. In the customize Selected Layout we have the title color set to white. It seems to think that it is a link and I would like to know how I can force the text to be white and to stay that way no matter which topic is selected.

How to configure the maintenance item screen layout

Hello experts,
I need to configure Maintenance Item Screen layout .
How do I do that? I checked in SPRO and could not find a place.
Need to make some some fields as required.
Thanks,
Raneetha.

There are some fields that can be made mandatory using Field Selection for Notification & Order.
Some fields should be made mandatory using development (User Exit IPRM0004)

RH 11 Imported Screen Layout Not Displaying in Gallery

Began using a trial of RH11 today and am experimenting with Responsive HTML5. I am trying to understand how to use a newly downloaded/imported screen layout while setting up a new single source Responsive HTML5 layout. I downloaded the screen layout from the Adobe site, which was a single file in a zip file. I unzipped the layout file to the same download folder and imported the extracted file into the Screen Layouts folder in the Project Set-up pod within RH11. Then while working in the Responsive HTML5 Settings window, clicked Gallery and expected to see the newly imported layout as an option there. The layout does not display. The layout name does display under the Screen Layouts folder folder in Project Set-up though.
How do I get the layout to display in the Gallery? I am wondering if I extracted the layout file to the wrong location? Does it have to be extracted to a folder within my project files such as the SSL folder or within the folder to which the RH11 trial software was installed? I assumed the Import process in Project Set-up would copy the layout file to wherever it was needed for it to work in Robohelp.
4/3 addition to original post -- adding a picture for reference regarding where I can't get the new layout to show. WIthout it showing here, how would I go about assigning the layout to my single source layout?
Message was edited by: KFarrelly

Thank you William. After following those steps, I was able to apply a newly downloaded .slz to my desired Responsive HTML5 single source layout.
While I am still not successful in getting the new screen layout to show in the gallery (in window accessed from B below), I was able to see the new screen layout in the Select drop-down list of the Responsive HTML Settings window -- thus mission acomplished! I made my selection from that list to get the desired, new screen layout applied to my project. Thanks so much!

Default the screen layout in T.code FBL1N

Can anyone help me with defaulting the screen layout for FBL1N. When I give the t.code FBL1N i should see the default layout populated.
Pls let me know the settings to be done.
Vinay

hi Vinay,
each user can set for her/himself in FB00.
ec

Start Screen Layout missing icon

One of the program I pinned to the Start Screen is missing. The program that's missing is the Opera browser. I created a custom start screen layout with all the programs I want in different namegroups. I put the AppsFolderLayout.bin file in the Default profile.
I am preparing a Windows 8.1 image. I do this so all users can have the same Start Screen layout. The first time I did this, it worked fine. I logged in as new users in the computers and I see all the programs I pinned to the Start Screen.
Right now, I'm doing the exact thing for a new Windows 8.1 image. I placed the AppsFolderLayout.bin file in the Default profile. I logged in as a new user and many. The Start Screen is empty, other than the Desktop and Computer tiles, since it's a new
Windows install, The programs that are pinned are not installed yet. When I install the programs, the tiles will populate to the Start Screen. All of them worked, except for the Opera browser. The Opera browser is not showing the Start Screen. I made sure
the program is pinned before I exported the layout. The program is installed for all user.
I checked the program is installed when I log in as different users. I
even deleted the user profiles that was installed on and logged in again, the icon is still not there.
Would a new version of the browser cause this issue? I even installed the version I had when I first had it working and it didn't work. Let me know what would cause this issue.

Hi,
Please use the command “get-startapps” in powershell.
We have tested. Every time we reinstall the Opera, the AppID will change.
The AppID is the identifier of app. If it changes automatically, the Operating System can’t customize Start screen by different AppID.
Please refer to the following article to customize Windows 8.1 start screen.
Customize Windows 8.1 Start Screens by Using Group Policy
http://technet.microsoft.com/en-us/library/dn467928.aspx
If you change the AppID in xml file to match the ID in the PC you want to customize Start screen. The Opera will show out.
Best Regard,

Update form Marketing Document screens from one user to other

I know there is a query somewhere where I can set up all Marketing Document screens for a user then copy it to other users so their Marketing documents have the same look and I don't have to go through each user.
Does anybody has that query? Thanks

Hi Rosi
A query would imply some sort of direct write to SAP tables and that is not wise. You could rather have a look at the DI API or DTW templates for updating user defaults. If I recall correctly it is called UserMenuService.
Kind regards
Peter Juby

Copy Screen Layouts across users?

Similar Messages

Maybe you are looking for