Copy the Notes/Text maintained in Campaign

Hi Forum,
Is there a way through which I can copy the Notes/Text maintained in Campaign to the Task/Activity document generated from my Campaign execution.
Regards,
Amit

Hello Amit,
could u solve the issue?
I have the same problem
regards
Helene

Similar Messages

Copying the item text in case of multiple line items

Hi All,
                I have a scenario where the sales order gets created in our SAP through a 850 idoc. The incoming idoc has only one item segment which carries the total order quantity ( for example say 1000). Since my company has contractual agreements with the end customer for doing multiple shipments , our sales department splits the total quantity into multiple line items in the sales order. Say splitting the 1000 quantities into 5 line items of 200 each.
The problem here is that when the sales order got created , all the related item text were copied only to the first line item ( of 1000 qty) and which is standard SAP. Since the order quantity was manually split, the related item text are not carried to the subsequent line items. The issue comes when an outbound (810) idoc is sent to customer . As I told earlier since only the first line item has the item text , the 810 idoc which was created for the first line item only has the item text . The rest of the 810 which were subsequently created for multiple shipments/invoices on different dates didn't have the item text in the 810's. This is becoming a major problem as the 810 files are failing at our trading partners end because of missing text.
Now my question is, Is there a way that I can make the item text copy automatically when multiple line items are created manually by business. Like is there a way where I can modify MV45AFZZ to copy the item text in their respective segemnts ( z003,z004 etc) to "N" number of line items.
Also please suggest if there is a better way of doing it. Suggstions are most welcome !!!.
Regards
Amrith

Hi,
First of all try to avoid doing select into corresponding fields. THis would improve the performance of the program.
Try to do a single fetch from the BSIS table . fetch the hkont, belnr, dmbtr fields in to a master internal table. Manipulate and play with the data as required. Don't hit the data base table more than once (unless it is required) . This would improve the performance of your code.
Try to code this way.
types: begin of ty_bsis,
             hkont type hkont,
             belnr type belnr_d,
             dmbtr type dmbtr,
          end of ty_bsis.
data: it_bsis type standard table of ty_bsis,
         wa_bsis type ty_bsis,
select hkont belnr dmbtr
          from bsis
          into table it_bsis
          WHERE HKONT IN S_RACCT
        AND PRCTR IN P_PRCTR
          AND MONAT IN S_POPER
         AND BUKRS EQ P_BUKRS
         AND GJAHR EQ P_GJAHR
          AND PRCTR IN S_PRCTR.
Using the data availabe in the it_bsis, you can manipulate as required.
Hope this would be helpful
Regards
Ramesh Sundaram

Is possible to bring the long text maintained in BOM to the Purchase order

Hi All,
Is possible to bring the long text maintained in BOM to the Purchase order ?
Thanks

Hi,
No, It is not possible. If u need the text in Purchase order, you need to maintain in the purchase order text or you can maintain in material master.
Regards,
V. Suresh

How to remove the note text for column (portal)

Hi to All,
Just i wanted to know how to remove the note (text) which is coming infrond the column in the appraisal template in portal view.
My client doest want the text "note" (which i highlighted in the yellow) comming infrond the coulum. Pls can anyone tell me how can i remove only the "note" text from the template?
Kind regards,
Saritha

Hi Saritha,
In SE80, Choose Web Dynpro Component HAP_DOCUMENT_BODY and you will find the component controller node, double click it and goto methods tab. Here you can find the method CONVERT_CONTEXT_TO_UI, this method will be triggered twice. Search for the code "CALL METHOD lo_nd_t_cells->get_static_attributes_table", this is the method which defaults the "Note" based on the row and column iid. You can overwrite the code by writing the implicit enhancement.
Hope it will help you and revert back in case of queries.
With Regards,
Giriesh M

In Logic X printing to pdf gives me strange drop shadows after the notes, text.. etc.

I'm doing a score layout in logic pro X and sended some PDF print files to my client, but he said there were drop shadows on the notes and text. It's really annoying and I can't figure out what the solution for this problem could be. I opened an older project in logic 9 to find out if it was the software, or maybe the conversion to pdf, but in logic 9 there was no problem . The pdf's were sharp as a knife.
Is there a solution for this problem?
Many thanks for any help
Olivier Lebeau

I have the exactly same issue.

Uploading the Notes text pool using Conversion method for Dispute Cases.

Hi Everybody,
Please can anybody give the solution for uploading the Notes textarea in tab(Notes in dispute cases) using BDC method for transaction FDM_AUTO_CREATE(Dispute Cases).
Here, the problem is, Notes is text area which is not having proper reference.
We have tried few BAPI's like BAPI_DISPUTE_CREATE but did not worked.

Hello! Anyones could resolve this?
Regards,
Federico

Need to fetch the routings based on the Object text maintained in Long text

Hi Gurus,
i have a requirement to fetch all the routing operations based on the Object text that had been maintained in the long text of the routing.
I found out the tables STXH and MAPL for the values, but unable to link the same.
Please do help me to find a solution.
Thank you.
Naveen.A

HI Ratan,
My requirement is to fetch routings that contain Object text.
The long text of a routings may contain many object texts , but i need to identify the specific object text alone and dispaly all the operations in which this object text exists.
Thanks for your understanding.
NAveen.A

HT4796 is there anyWAY TO COPY THE "NOTES" from wy outlook windows program to my mac

Is there anyway to copy my "notes" in windows outlook mail to notes on my MAC book air

Hi Stephgeorg,
You could keep the notes synchronized using iCloud. For more information see this article:
iCloud: Notes overview
http://support.apple.com/kb/PH12081
Setup instructions for iCloud can be found here:
iCloud - Setup - PC
http://www.apple.com/icloud/setup/pc.html
Cheers!
- Ari

Copy and/or Cut and Paste no longer works from within Firefox yet I can Paste to Notepad and yet again copy the same text from within Notepad or any app will not Paste back into Firefox, thanks

I 'Copy & Paste' from within Firefox quite often but for some reason the function has stopped working when using some sites, even the menu item 'Paste' is greyed out, yet I can open Notepad and 'Paste'. I tried pasting into 'Notepad' then copying from Notepad and pasting back into Firefox, which I've found in the past sometimes works but today even that does not work. I accept it may not actually be a Firefox problem but I have noticed since upgrading to the latest version, I am having several problems with crashing and hanging exceedingly long execution of the browser.

See:
*http://kb.mozillazine.org/Clipboard_not_working

DON'T copy the selected text automatically!!!

version: 11.1.1.7
OS: Linux
In jdev code editor, when you select "something1", click Ctrl+C, then select "somehting2", click Ctrl + P. You will find nothing happens.
This is because when you select "something2", the clipboard is replaced with "something2".
When you select something, the editor copy it automatically. Not sure if user can disable this behavior.
Really bad feature, no editor behaves like this.

Leon,
It is not JDev issue, it is a feature in Linux.
You may post this question in Linux forums or give a try to the solution in [this link|http://vim.wikia.com/wiki/Auto_copy_the_mouse_selection], haven't tried though.
Sireesha

I did a COPY of some text from a web page, and then did a PASTE into notepad.exe (Windows). The text from each line was duplicated -- on the line! Instead of "Fred", it became "Fred Fred".

I just recently installed Firefox for the first time. It seems nice and quick. The version is reported as: "10.0.1".
I wanted to save some text from a web page, so navigated to that page, selected the text, and pressed the Control-C combination to COPY the selected text to the buffer. For example, the text I selected looked something like this:
Harry
Ron
Hermione
Hagrid
Albus
NOTE: Each line of text has a small icon to the left of the text.
It is not reasonable to COPY and PASTE each line individually, as there can be hundreds of lines of data. I recall, however, that
doing a COPY and PASTE on this data into Microsoft's Excel will produce cells which have the icons included in the cell, but unfortunately one cannot can't get rid of them! At least I've never found a way to remove them, but that's another issue. :)
Once I'd done the COPY operation I switched to a Notepad window and did a PASTE operation. To my surprise, the text from each line was duplicated. It looked like this:
Harry Harry
Ron Ron
Hermione Hermione
Hagrid Hagrid
Albus Albus
Thinking that there might be something unusual about the web page I looked at the source, but it appeared "normal" -- that is, as expected.
Note: I have done this operation several times before, and have never seen this occur before.
Note: In the actual data some of the lines have quoted text in them. Curiously there is weird behavior on these lines. In some cases the entire line is shown only once. (These occur at the top of the line, and the quoted text is at the beginning of the name.)
When quoted text appears "later" in the name, in some cases the quoted text is duplicated, and in other cases the quoted text is missing altogether! I have also noticed an error with the quoted text, and so will be reporting that to the web site which generates the HTML.
Note that each line of "text" is "anchor text", so if I click on a name the browser navigates to a page for that name.
I believe that the problem is that the COPY operating in Firefox is not simply copying the visible text, but also the ALT=
Below is a sample of what the source HTML looks like:
<a class="lnk" target="_blank" href="http://details.aspx?id=Harry">
<img width="16" height="16" alt="Harry" class="tb_icon" src="http://.../Harry.gif"/>
<span>Harry</span></a>
<br/>
(Because of the true length of the lines in the source HTML, I have stripped out the actual URL of the site.)
To make sure I wasn't imaging this difference I repeated the process within Internet Explorer. In that browser I did not get duplicated data.

Try:
*Extended Copy Menu (fix version): https://addons.mozilla.org/firefox/addon/extended-copy-menu-fix-vers/

I can't copy and paste text into photoshop because the copy paste option is acting up

Let me explain. I found some text on a website I wanted to us for my project so I copied it into a text box that I made in photoshop. I edited the text to my liking and then hilighted the entire text. When I go to copy the text by right clicking and then clicking on copy it just pastes the original text from the website I got it from instead of copying the edited text. I even tried ctrl+ C and it still pasted the original text not copy the one I edited. Last resort- I re-edited my text and go to edit and click copy. Still no fix it just pastes the original text. For some reason photoshop is thinking that the copy option is a paste option. I have no idea why this is or how to fix this. This was not happening about an hour ago so I have no idea why this is happening. I even tried restarting my laptop and I even tried a test in a completely new photoshop document and it still does this. How do I fix this? I have photoshop CS4 currently installed. Help is appreciated.

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Header Text from Sales Order Not Copied to Header Text Invoice.

Hello All....Does anybody have an idea why this is happening ??
My Sales Order have the Header Cl.Text Z001 "Header Text", I write text in two languaje "EN" and "ES".
Z001 Header Text (Sales Order)
         EN -->>   Hello
         ES -->>   Hola
When I create the Invoice with reference this Sales Order, this only copy the Spanish Text but not the English Text.
Z001 Header Text (Invoice)
        ES -->> Hola
Thanks in advanced.
JEOS.

Hello Jorge
Ensure that you checked the box 'All Languages' in the related access sequence.
T code VOTXN.

Copy the PR header Text to RFQ header Text while Creating W.R.T

Dear Guru's
While Creating with reference I want to Copy the PR Header text into RFQ Header Text..
Please do the needfulll
Thanks in Advance.
GSANA

Dear You can not copy the header text of PR to RFQ in the standard SAp, as PR is internal document and RFQ is external. but if you even want to do it then contact your ABAP team.
regards,
qsm sap

Maintenance order - Copy header long text in first operation.

Hi gurus,
I have the following requirement I dont know hoy to solve it.
In our system, there is a certain maintenance order class for corrective operations. During creation, the short text in order header is transferred automatically to the first operation one.
But this behaviour doesn´t works with long text, although for each operation there is the possibility to enter a long text.
Any ideas? Thanks in advance.

Hi Ole,
This is the standard Behaviour of the system as the system is designed to make sure that there are some Operation maintained in the Operation Tab, and if not maintained then copy the Header Text, that too for the Short Text only.
please make sure that you are calling the Task List or maintaining the operation in the Operation Tab.
Hope it helps you.
regards,
yawar Khan

Copy the Notes/Text maintained in Campaign

Similar Messages

Maybe you are looking for