CopyProfile fails when image deployed

Hi,
I am using Windows Server 2012 R2 Datacentre with WDS to capture, service and deploy Windows 8.1 Enterprise.
I've created an unattend answerfile to be used on the various passes during deployment which works fine until I service the image offline.
Basically I am mounting the image and installing driver packs using DISM, I do this with multiple images independently but each one fails with the CopyProfile stage at the specialise pass.
If I deploy before servicing, CopyProfile works.
I run CMD prompt with elevated priveleges and use the DISM command within that DOS session. I am Domain admin. Server is fully patched up.
Any ideas on what could be causing this please?
Nige

Hi,
This issue is mostly caused by the user profile corruption.
Please delete all the user account profiles except the Administrator built-in account using the User Accounts control panel and make the customizations using the local Administrator built-in user account.
Them retry your process.
Alex Zhao
TechNet Community Support

Similar Messages

Rename Fails When Imaging - SCPreferencesCommitChanges() failed

Hello!
I had an image put together for Yosemite 10.10.2 that has been working great since the beginning of February. I attempted to image a few computers over the last few days, and all systems get the same error message at the same place. Part of the post image process is to pop-up the rename workstation app so that we can enter the computer name. The box pops-up; however, the rename fails with the following error:
SCPreferencesCommitChanges() failed: Write attempted on stale version of object (1)
Does anyone know what would cause an error like this?
Thanks so much!
Vernon

It recognises Ethernet card as Ethernet Connection I218-LM
Can’t ping anything
It might be a driver for a wrong version of Windows PE (it's the x86 boot image you need to test).
Make sure you have the correct version of the NIC driver in your boot image .
Here is a old (but still valid) guide for SCCM 2007, on how to test if you have the correct driver.
http://www.ronnipedersen.com/2009/04/importing-network-drivers-into-the-windows-pe-boot-image/
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

Deploy OS task sequence fails when deploying to multiple computers

Hi gang,
I'm running into an issue when imaging multiple computers with MDT 2012. Let me give some background info.
I have installed Windows 7 64 bit on a laptop in audit mode, made my configurations, sysprepped the machine, and captured a .wim using WDS (captured to an external hard drive). I then imported this .wim into MDT, created a Standard Client Task Sequence to deploy
the image, and successfully deployed it to a machine.
My problem comes up when I initiate this task sequence on multiple computers simultaneously. If I put 6 computers side-by-side and run the task sequence at the same time, only a couple machines will actually succeed. The rest fail with the following:
FAILURE ( 5624 ): 2: Run ImageX: /apply "\\CAAPPWN40\DeploymentShare$\Operating Systems\T731 (Final) Windows 7 64 bit May 2013\T731 (Final) Windows 7 64 bit May 2013.wim"
1 C:
Litetouch deployment failed. Return Code = -2147467259 0x80004005
Failed to run the action: Install Operating System
Unknown error (Error: 000015F8; Source: Unknown)
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operating aborted (Error: 80004004; Source: Windows)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Unknown error (Error: 000015F8; Source: Unknown)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005
BDD.log is saying that "The file or directory is corrupted and unreadable."
If I restart the computer, boot back into PXE, and run the task sequence again, this time on it's own (as opposed to 6 computers at once) it works fine.
Can anyone help?

I just rebooted the server and tried again, same result.
I keep getting a "Body text cannot contain links or images until we are able to verify your account" error when posting a hyperlink. I've had my technet account since October... weird.
Here's the snippet that's important:
<![LOG[ Console > [ 18% ] Applying progress: 14:47 mins remaining ]LOG]!><time="11:27:10.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 19% ] Applying progress: 14:27 mins remaining ]LOG]!><time="11:27:18.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 20% ] Applying progress: 14:15 mins remaining ]LOG]!><time="11:27:32.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Common Files\microsoft shared\OFFICE15\MSORES.DLL again (Error = 1392)]LOG]!><time="11:27:40.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 21% ] Applying progress: 14:06 mins remaining ]LOG]!><time="11:27:42.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 22% ] Applying progress: 13:49 mins remaining ]LOG]!><time="11:27:48.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 23% ] Applying progress: 13:29 mins remaining ]LOG]!><time="11:27:55.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ZTI Heartbeat: command has been running for 5 minutes (process ID 516)]LOG]!><time="11:28:01.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Intel Corporation\Intel Wireless Display\it\WiDiApp.resources.dll again (Error = 1392)]LOG]!><time="11:28:01.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Intel Corporation\Intel Wireless Display\it\WiDiApp.resources.dll again (Error = 1392)]LOG]!><time="11:28:01.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Intel Corporation\Intel Wireless Display\it\WiDiApp.resources.dll again (Error = 1392)]LOG]!><time="11:28:02.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Intel Corporation\Intel Wireless Display\it\WiDiApp.resources.dll again (Error = 1392)]LOG]!><time="11:28:02.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 24% ] Applying progress: 13:13 mins remaining ]LOG]!><time="11:28:07.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Microsoft Analysis Services\AS OLEDB\110\msmdlocal.dll again (Error = 1392)]LOG]!><time="11:28:13.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Microsoft Analysis Services\AS OLEDB\110\msmdlocal.dll again (Error = 1392)]LOG]!><time="11:28:14.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Microsoft Analysis Services\AS OLEDB\110\msmdlocal.dll again (Error = 1392)]LOG]!><time="11:28:15.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Microsoft Analysis Services\AS OLEDB\110\msmdlocal.dll again (Error = 1392)]LOG]!><time="11:28:16.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ ERROR ] C:\Program Files (x86)\Microsoft Analysis Services\AS OLEDB\110\msmdlocal.dll (Error = 1392)]LOG]!><time="11:28:17.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Error restoring image.]LOG]!><time="11:28:17.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > The file or directory is corrupted and unreadable. ]LOG]!><time="11:28:17.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Return code from command = 2]LOG]!><time="11:28:17.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[FAILURE ( 5624 ): 2: Run ImageX: /apply "\\MyServer\DeploymentShare$\Operating Systems\T731 (Final) Windows 7 64 bit May 2013\T731 (Final) Windows 7 64 bit May 2013.wim" 1 C:]LOG]!><time="11:28:17.000+000" date="06-11-2013" component="LTIApply" context="" type="3" thread="" file="LTIApply">
<![LOG[Command completed, return code = -2147467259]LOG]!><time="11:28:18.000+000" date="06-11-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Litetouch deployment failed, Return Code = -2147467259 0x80004005]LOG]!><time="11:28:18.000+000" date="06-11-2013" component="LiteTouch" context="" type="3" thread="" file="LiteTouch">

How to create a Pooled VDI infrastructure using Win server 2012 as VM image?I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM

I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
Am I overlooking something? Should I need to prepare the image in a different way? (Sysprep differently?)
Thanks

Hi,
Thank you for your posting in Windows Server Forum.
Can you specify the error which you are facing during VDI setup for server 2012?
I might think that you need to check the memory setting for server 2012, as might happens that due to less memory you can’t setup the VDI setup properly.
Memory: If the Master VM is configured with static memory, it must have at least 1024 MB as startup RAM. If the Master VM is configured with dynamic memory, the maximum RAM must be at least 1024 MB.
Please check beneath article for information.
Windows
Server 2012 2,500-user pooled VDI deployment guide (Doc)
Single Image Management for Virtual Desktop Collections in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki

MDT image deployment fails after adding applications

I've been trying to use MDT (ie deployment workbench 6.2.5019.0) to build and deploy images for quite some time now, and I am having a lot of difficulty deploying images to target computers. I've successfully built a reference image in a VM with all
the Win7 updates. I can deploy that image to HP z820 workstations while injecting drivers. Then I've tried two ways of adding applications, capturing that image and then re-deploying it to other target machines.
First, I run a standard client task sequence that will deploy and capture an image to a target machine. I put in a suspend command in the task sequence. I can then add applications and then restart the task sequence. If I don't add applications,
and I just let the task sequence do it's magic, inject drivers, add any remaining Windows updates, and then just resume, MDT will capture the image. I can then add it to my deployment share and then deploy it back to my target machine that it came from
or any other similar target. On the other hand, if I add all my applications during the suspend, MDT will capture the image, but subsequent deployments of the image will always fail on the target machine during Windows setup.
Second, I can deploy the reference image to a target, let the sequence finish, add the apps, then run a sysprep and capture task sequence. I finally got that to work. I have an image with apps that I can deploy. However, I go to a target
machine that image was deployed to, I added for example Office and Winzip. Then I run the same sysprep and capture sequence, capture the image, and when I deploy that image back, it hangs while setup is installing devices.
Why am I having so much trouble just adding applications to an image that deployed perfectly fine before, but once I add apps, I can no longer use the same task sequences to capture and deploy? These same task sequences will capture and deploy the
image without the apps, but not with the apps. I don't get it.
So, what's so special about adding applications, and also can anyone give me a good reference for troubleshooting deployment issues where sysprep and setup fail for whatever reason?

Hmmm... Applications should not cause hangs when installing drivers. In fact NOTHING should cause a hang like that... except for a bad driver. Go back and go through you driver manifest with a fine tooth comb and find the bad driver. That may include removing
all of your 3rd party drivers.
Keith Garner - keithga.wordpress.com

SDM failed when deploying a Web Dynpro application

SDM failed when deploying a Web Dynpro application - I get the following error message:
Sep 19, 2006 2:25:34 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : eix-blade-011
SDM port : 50118
URL to deploy : file:/D:/DOCUME1/AMRM1.AZI/LOCALS1/Temp/temp43621sap.comwelcome.ear
Deployment exception : Server eix-blade-011 did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server eix-blade-011 at port 50118: eix-blade-011
Inner exception was :
Server eix-blade-011 did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server eix-blade-011 at port 50118: eix-blade-011

Amr Azim,
You must have logged in thru a dedicated connection to any server through say VPN before deploying.This way the sdm uses the same login as that of already establised connection.
So 'sign of' all connections to any servers before deploying and redeploy your application.Here you will be prompted to supply the sdm password and deployment shall proceed.

Creation of InitialContext fails when i hot-deploy scheduler-service.xml

Creation of InitialContext fails when i hot-deploy scheduler-service.xml
I configured scheduler-service as follows in Jboss 3.2:
scheduler-service.xml
<mbean code="org.jboss.varia.scheduler.Scheduler"
     name=":service=Scheduler">
<attribute name="StartAtStartup">true</attribute>
<attribute name="SchedulableClass">com.beta.my.utils.FMScheduler</attribute>
<attribute name="SchedulableArguments">Schedulabe Test,12345</attribute>
<attribute name="SchedulableArgumentTypes">java.lang.String,int</attribute>
<attribute name="InitialStartDate">0</attribute>
<attribute name="SchedulePeriod">10000</attribute>
<attribute name="InitialRepetitions">-1</attribute>
</mbean>
Schedulable Class
package com.beta.my.utils;
import java.util.Date;
import org.jboss.varia.scheduler.Schedulable;
public static class FMScheduler
implements Schedulable
private String mName;
private int mValue;
public FMScheduler(String pName,int pValue)
mName = pName;
mValue = pValue;
public void perform(Date pTimeOfCall,long pRemainingRepetitions)
try {
          Context context = new InitialContext();//properties taken from jndi.properties file
          } catch (Exception e){
               e.printStackTrace();
I started my jboss..,FMScheduler created successfully, perform method in FMScheduler called succesfully after SchedulePeriod(1000)
The problem occurs(NullPointerException) while i changed SchedulePeriod time and hot-deployed(just saved scheduler-service.xml).
The following Exception occures due to InitialContext creation fails*(Context context = new InitialContext();)* in FMScheduler.
17:46:27,361 ERROR [STDERR] java.lang.NullPointerException
17:46:27,361 ERROR [STDERR] at org.jboss.mx.loading.UnifiedClassLoader.findR
esources(UnifiedClassLoader.java:374)
17:46:27,361 ERROR [STDERR] at java.lang.ClassLoader.getResources(ClassLoade
r.java:825)
17:46:27,361 ERROR [STDERR] at com.sun.naming.internal.VersionHelper12$5.run
(VersionHelper12.java:145)
17:46:27,361 ERROR [STDERR] at java.security.AccessController.doPrivileged(N
ative Method)
17:46:27,377 ERROR [STDERR] at com.sun.naming.internal.VersionHelper12.getRe
sources(VersionHelper12.java:142)
17:46:27,377 ERROR [STDERR] at com.sun.naming.internal.ResourceManager.getAp
plicationResources(ResourceManager.java:468)
17:46:27,377 ERROR [STDERR] at com.sun.naming.internal.ResourceManager.getIn
itialEnvironment(ResourceManager.java:159)
17:46:27,377 ERROR [STDERR] at javax.naming.InitialContext.init(InitialConte
xt.java:215)
17:46:27,377 ERROR [STDERR] at javax.naming.InitialContext.<init>(InitialCon
text.java:195)
17:46:27,377 ERROR [STDERR] at com.beta.my.utils.FMScheduler.perform
(FMScheduler.java:42)
17:46:27,392 ERROR [STDERR] at org.jboss.varia.scheduler.Scheduler$Listener.
handleNotification(Scheduler.java:1263)
17:46:27,392 ERROR [STDERR] at org.jboss.mx.server.NotificationListenerProxy
.handleNotification(NotificationListenerProxy.java:69)
17:46:27,392 ERROR [STDERR] at javax.management.NotificationBroadcasterSuppo
rt.sendNotification(NotificationBroadcasterSupport.java:95)
17:46:27,392 ERROR [STDERR] at javax.management.timer.Timer.sendNotification
s(Timer.java:441)
17:46:27,392 ERROR [STDERR] at javax.management.timer.Timer.access$000(Timer
.java:31)
17:46:27,408 ERROR [STDERR] at javax.management.timer.Timer$RegisteredNotifi
cation.doRun(Timer.java:612)
17:46:27,408 ERROR [STDERR] at org.jboss.mx.util.SchedulableRunnable.run(Sch
edulableRunnable.java:164)
17:46:27,408 ERROR [STDERR] at org.jboss.mx.util.ThreadPool$Worker.run(Threa
dPool.java:225)
please help me if u have any idea,thanks

Hi Hamsa,
Did you also create and configure an "Execution Destination"?
You can test the Metadata destination configuration on Web Service Navigator.
On the web service navigator (http://hostname:portnumber/wsnavigator) search in the metatda destination you have created for the service you imported in web dynpro as a model. If you can find it there test it on the ws navigator.
Best regards,
Yasar

"Failed to unlock deployment list" when deploying to another location

Hi everybody
I am deploying packages from a location test to a location prod, when i try to deploy the packages the stderr.txt gives me that
"Failed to unlock deployment list"
Any suggestions;
Thanks Niko

Hi everybody
I am deploying packages from a location test to a location prod, when i try to deploy the packages the stderr.txt gives me that
"Failed to unlock deployment list"
Any suggestions;
Thanks Niko

WebLogic 12.1.2 fails when deploying ear with injecting extension and bean with injection of this extension in ejb

WebLogic 12.1.2 fails when deploying an enterprise application(ear) that contains a ejb in which injected 1) an extension 2)bean with injection of this extension.
The following exception is thrown:
Caused By: org.jboss.weld.exceptions.DeploymentException: WELD-001409 Ambiguous dependencies for type [CdiExtension] with qualifiers [@Default] at injection point [[field] @Inject private test.extension.Bean1.extension].
Possible dependencies [
[Extension [class test.extension.CdiExtension] with qualifiers [@Default]; zip:/domain1/servers/AdminServer/tmp/_WL_user/test/7x6roh/lib/test-extension-0.0.1-SNAPSHOT.jar!/META-INF/services/javax.enterprise.inject.spi.Extension@1[test.extension.CdiExtension@1115deb],
Extension [class test.extension.CdiExtension] with qualifiers [@Default]; zip:/domain1/servers/AdminServer/tmp/_WL_user/test/7x6roh/lib/test-extension-0.0.1-SNAPSHOT.jar!/META-INF/services/javax.enterprise.inject.spi.Extension@1[test.extension.CdiExtension@ed791f]]]
    at org.jboss.weld.bootstrap.Validator.validateInjectionPoint(Validator.java:314)
    at org.jboss.weld.bootstrap.Validator.validateInjectionPoint(Validator.java:280)
    at org.jboss.weld.bootstrap.Validator.validateBean(Validator.java:143)
    at org.jboss.weld.bootstrap.Validator.validateRIBean(Validator.java:163)
    at org.jboss.weld.bootstrap.Validator.validateBeans(Validator.java:382)
    at org.jboss.weld.bootstrap.Validator.validateDeployment(Validator.java:367)
    at org.jboss.weld.bootstrap.WeldBootstrap.validateBeans(WeldBootstrap.java:379)
    at com.oracle.injection.provider.weld.WeldInjectionContainer.start(WeldInjectionContainer.java:106)
    at com.oracle.injection.integration.CDIAppDeploymentExtension.initCdi(CDIAppDeploymentExtension.java:70)
    at com.oracle.injection.integration.CDIAppDeploymentExtension.activate(CDIAppDeploymentExtension.java:47)
    at weblogic.application.internal.flow.AppDeploymentExtensionFlow.activate(AppDeploymentExtensionFlow.java:37)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:729)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:258)
    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:61)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:165)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
Problem can be easily reproduced by a minimal case:
test.ear:
\lib\test-extension-0.0.1-SNAPSHOT.jar
test-ejb-0.0.1-SNAPSHOT.jar
where
test-extension-0.0.1-SNAPSHOT.jar contains:
CdiExtension.java:
package test.extension;
import javax.enterprise.inject.spi.Extension;
public class CdiExtension implements Extension {
    private String someString = "Some String";
    public String getSomeString() {
        return someString;
Bean1.java:
package test.extension;
import javax.enterprise.context.ApplicationScoped;
import javax.inject.Inject;
@ApplicationScoped
public class Bean1 {
    @Inject
    private CdiExtension extension;
    public String get() {
        return extension.getSomeString();
test-ejb-0.0.1-SNAPSHOT.jar contains:
EjbBean.java:
package test;
import test.extension.Bean1;
import test.extension.CdiExtension;
import javax.ejb.Stateless;
import javax.inject.Inject;
@Stateless
public class EjbBean {
    @Inject
    private CdiExtension extension;
    @Inject
    private Bean1 bean1;
    public String getSomeString() {
        return extension.getSomeString() + "\n" + bean1.get();
p.s. i seen same problem in community.oracle.com/thread/2577403 , but it happen in "war", not "ear", and seems successfully patched with patch №17424706

Hi,
It looks like there is patch exists for this issue.
Patch 17198187
Please try to download from the MOS or try to open a ticket with support.
Regards,
Kal

Server doesn't start when a deploy fails in WSL8.1

Hi
I don't know if that is the normal behaviour, but in WL51 when a deploy fails during a server start, only fails that deploy but the server started.
Here you can see the log
####<14-ene-2005 12H15' CET> <Error> <Deployer> <nodoyuna> <PRJINET-DESA11> <Main Thread> <<WLS Kernel>> <> <BEA-149205> <Failed to initialize the application Cn-EJBS due to error weblogic.management.ManagementException: [Deployer:149233]An unexpected error was encountered during the deployment process. - with nested exception:[java.lang.NoClassDefFoundError: es/cajaduero/SF/SFData].java.lang.NoClassDefFoundError: es/cajaduero/SF/SFData at java.lang.ClassLoader.defineClass(Ljava.lang.String;[BIILjava.security.ProtectionDomain;)Ljava.lang.Class;(Unknown Source) at java.security.SecureClassLoader.defineClass(Ljava.lang.String;[BIILjava.security.CodeSource;)Ljava.lang.Class;(SecureClassLoader.java:123) at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Ljava.lang.String;)Ljava.lang.Class;(GenericClassLoader.java:476) at weblogic.utils.classloaders.GenericClassLoader.findClass(Ljava.lang.String;)Ljava.lang.Class;(GenericClassLoader.java:181) at java.lang.ClassLoader.loadClass(Ljava.lang.String;Z)Ljava.lang.Class;(Unknown Source) at java.lang.ClassLoader.loadClass(Ljava.lang.String;)Ljava.lang.Class;(Unknown Source) at weblogic.utils.classloaders.GenericClassLoader.loadClass(Ljava.lang.String;)Ljava.lang.Class;(GenericClassLoader.java:223) at java.lang.ClassLoader.loadClassFromNative(II)Ljava.lang.Class;(Unknown Source) at jrockit.vm.Classes.defineClass0(ILjava.lang.String;[BII)I(Unknown Source) at jrockit.vm.Classes.defineClass(Ljava.lang.ClassLoader;Ljava.lang.String;[BII)Ljava.lang.Class;(Unknown Source) at java.lang.ClassLoader.defineClass(Ljava.lang.String;[BIILjava.security.ProtectionDomain;)Ljava.lang.Class;(Unknown Source) at java.security.SecureClassLoader.defineClass(Ljava.lang.String;[BIILjava.security.CodeSource;)Ljava.lang.Class;(SecureClassLoader.java:123) at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Ljava.lang.String;)Ljava.lang.Class;(GenericClassLoader.java:476) at weblogic.utils.classloaders.GenericClassLoader.findClass(Ljava.lang.String;)Ljava.lang.Class;(GenericClassLoader.java:181) at java.lang.ClassLoader.loadClass(Ljava.lang.String;Z)Ljava.lang.Class;(Unknown Source) at java.lang.ClassLoader.loadClass(Ljava.lang.String;)Ljava.lang.Class;(Unknown Source) at weblogic.utils.classloaders.GenericClassLoader.loadClass(Ljava.lang.String;)Ljava.lang.Class;(GenericClassLoader.java:223) at java.lang.ClassLoader.loadClassFromNative(II)Ljava.lang.Class;(Unknown Source) at jrockit.vm.Classes.defineClass0(ILjava.lang.String;[BII)I(Unknown Source) at jrockit.vm.Classes.defineClass(Ljava.lang.ClassLoader;Ljava.lang.String;[BII)Ljava.lang.Class;(Unknown Source) at java.lang.ClassLoader.defineClass(Ljava.lang.String;[BIILjava.security.ProtectionDomain;)Ljava.lang.Class;(Unknown Source) at java.security.SecureClassLoader.defineClass(Ljava.lang.String;[BIILjava.security.CodeSource;)Ljava.lang.Class;(SecureClassLoader.java:123) at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Ljava.lang.String;)Ljava.lang.Class;(GenericClassLoader.java:476) at weblogic.utils.classloaders.GenericClassLoader.findClass(Ljava.lang.String;)Ljava.lang.Class;(GenericClassLoader.java:181) at java.lang.ClassLoader.loadClass(Ljava.lang.String;Z)Ljava.lang.Class;(Unknown Source) at java.lang.ClassLoader.loadClass(Ljava.lang.String;)Ljava.lang.Class;(Unknown Source) at weblogic.utils.classloaders.GenericClassLoader.loadClass(Ljava.lang.String;)Ljava.lang.Class;(GenericClassLoader.java:223) at java.lang.ClassLoader.loadClassFromNative(II)Ljava.lang.Class;(Unknown Source) at java.lang.Class.getMethods0(II)[I(Unknown Source) at java.lang.Class.findMethods(I)[Ljava.lang.reflect.Method;(Unknown Source) at java.lang.Class.getMethods(I)[Ljava.lang.reflect.Method;(Unknown Source) at weblogic.ejb20.ejbc.VersionHelper.computeCRC(Ljava.lang.String;Ljava.lang.ClassLoader;)J(VersionHelper.java:355)--------------- nested within: ------------------weblogic.management.ManagementException: [Deployer:149233]An unexpected error was encountered during the deployment process. - with nested exception:[java.lang.NoClassDefFoundError: es/cajaduero/SF/SFData] at weblogic.management.deploy.slave.SlaveDeployer.convertThrowable(Ljava.lang.Throwable;)Ljava.lang.Exception;(SlaveDeployer.java:1017) at weblogic.management.deploy.slave.SlaveDeployer.access$500(Lweblogic.management.deploy.slave.SlaveDeployer;Ljava.lang.Throwable;)Ljava.lang.Exception;(SlaveDeployer.java:124) at weblogic.management.deploy.slave.SlaveDeployer$Application.prepare()V(SlaveDeployer.java:2928) at weblogic.management.deploy.slave.SlaveDeployer.prepareAllApplications(Z)V(SlaveDeployer.java:967) at weblogic.management.deploy.slave.SlaveDeployer.resume()V(SlaveDeployer.java:349) at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume()V(DeploymentManagerServerLifeCycleImpl.java:229) at weblogic.t3.srvr.SubsystemManager.resume()V(SubsystemManager.java:131) at weblogic.t3.srvr.T3Srvr.resume()V(T3Srvr.java:966) at weblogic.t3.srvr.T3Srvr.run([Ljava.lang.String;)I(T3Srvr.java:361) at weblogic.Server.main([Ljava.lang.String;)V(Server.java:32)> ...
####<14-ene-2005 12H15' CET> <Emergency> <Deployer> <nodoyuna> <PRJINET-DESA11> <Main Thread> <<WLS Kernel>> <> <BEA-149229> <Server PRJINET-DESA11 in cluster PRJINET-DESA-CLUSTER1 is unable to initialize due to failed deployments.> ####<14-ene-2005 12H15' CET> <Error> <Deployer> <nodoyuna> <PRJINET-DESA11> <Main Thread> <<WLS Kernel>> <> <BEA-149601> <The deployment framework was unable to resume accepting requests.> ####<14-ene-2005 12H15' CET> <Emergency> <WebLogicServer> <nodoyuna> <PRJINET-DESA11> <Main Thread> <<WLS Kernel>> <> <BEA-000342> <Unable to initialize the server: [Deployer:149601]The deployment framework was unable to resume accepting requests.[Deployer:149229]Server PRJINET-DESA11 in cluster PRJINET-DESA-CLUSTER1 is unable to initialize due to failed deployments.>
Thanks in advanced
regards
Jaime

Unfortunately, this is normal behaviour for WLS 8.1.
I personally find this to be a non-robust design. I have 10-15 apps per domain, why kill the whole domain for one bad deployment? I am going to open a change request with BEA.

When i downland flashcc it stop and tell me ERROR: DW039: Failed to load deployment File

when i downland flashcc it stop and tell me ERROR: DW039: Failed to load deployment File
what can i do? how to fix it?

open the cc dektop app -> click preferences -> Select language English (International) -> exit the cc app > restart the cc app > install flash cc.

When I install Flash Professional CC 2014, I got the Error: DW039: Failed to load deployment File

When I install Flash Professional CC 2014, I got the Error:
Exit Code: 16 Please see specific errors below for troubleshooting.
For example, ERROR: DW039 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
ERROR: DW039: Failed to load deployment File

The solution mentioned above doesn't work for me.
Change language, restart Macbook, error again, change language back and forth, restart every time, it just doesn't work.
I was installing same app - Flash Professional CC 2014.
I got the same error
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
ERROR: DW039: Failed to load deployment File
So, same problem, same question.

Hello REST web service example deployment fails when using EJB

I was able to successfully deploy the hello REST web service example. But when I attempted to lookup an EJB via the following code I get an error message.
try {
ic = new InitialContext();
DirectoryBean db = (DirectoryBean)ic.lookup("java:comp/env/ejb/DirectoryBean");
} catch (NamingException ex) {
ex.printStackTrace();
Here is the error message in the NetBeans console window:
Deploying application in domain failed; Error loading deployment descriptors for module [hello] -- com.sun.enterprise.deployment.annotation.context.WebBundleContext cannot be cast to com.sun.enterprise.deployment.annotation.context.EjbContextat com.sun.enterprise.deployment.annotation.AnnotationInfo@15f1fa0
D:\java\Sun\swdp-tutorial-1.0\examples\rest\hello\nbproject\build-impl.xml:450: Deployment error:

I think the problem may be that the SimpleServlet example uses an apt feature to generate a web.xml which will replace any web.xml you already have in the project (and lose any references etc you might have in it). To work around this problem first copy the necessary lines from the web.xml in the generates .war file - they should look something like this:
<servlet>
<servlet-name>RESTBeans Application</servlet-name>
<servlet-class>com.sun.ws.rest.impl.container.servlet.ServletAdaptor</servlet-class>
<init-param>
<param-name>resourcebean</param-name>
<param-value>com.sun.ws.rest.samples.servlet.resources.RESTBeansResources</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>RESTBeans Application</servlet-name>
<url-pattern>/restbean/*</url-pattern>
</servlet-mapping>
Add these to your project web.xml, replacing any lines that look similar (the web.xml in the sample project has these lines that you'll need to replace:
<servlet>
<servlet-name>ServletAdaptor</servlet-name>
<servlet-class>com.sun.ws.rest.impl.servlet.ServletAdaptor</servlet-class>
<init-param>
<param-name>resources</param-name>
<param-value>test1</param-value>
</init-param>
</servlet>
<servlet-mapping>

<servlet-name>ServletAdaptor</servlet-name>
<url-pattern>/*</url-pattern>
</servlet-mapping>
Now you need to turn off automatic web.xml generation by adding <option key="noservlet"/> to the apt task option in build.xml (look for the apt child of the -pre-compile task in build.xml).
Clean and rebuild and make sure that the web.xml in the generated .war file now matches the project web.xml file.
Marc.

How to delete application when its deployment state is failed or running or released ?

Hi All
How do we in WLST delete an application when it is in failed deployment state ?
An example would be good.
App1 is not shown in AdminServer deployment tab screen but somehow WLS still thinks it exists.
We like to remove any application when its deployment state isn't completed.
Any help is appreciated
Sincerely
Thanks
23:16:18 Listing applications ...
23:16:18 drw- App1
23:16:18 drw- App2
23:16:18 drw- App3
23:16:18
23:16:18
23:16:18
23:16:18 -r-- ApplicationIds java.lang.String[App1, App2, App3]
23:16:18 -r-- Name AppRuntimeStateRuntime
23:16:18 -r-- Type AppRuntimeStateRuntime
23:16:18
23:16:18 -r-x getCurrentState String : String(appid),String(moduleid),String(subModuleId),String(target)
23:16:18 -r-x getCurrentState String : String(appid),String(moduleid),String(target)
23:16:18 -r-x getCurrentState String : String(appid),String(target)
23:16:18 -r-x getIntendedState String : String(appid)
23:16:18 -r-x getIntendedState String : String(appid),String(target)
23:16:18 -r-x getModuleIds String[] : String(appid)
23:16:18 -r-x getModuleTargets String[] : String(appid),String(moduleid)
23:16:18 -r-x getModuleTargets String[] : String(appid),String(moduleid),String(subModuleId)
23:16:18 -r-x getModuleType String : String(appid),String(moduleid)
23:16:18 -r-x getRetireTimeMillis Long : String(appid)
23:16:18 -r-x getRetireTimeoutSeconds Integer : String(appid)
23:16:18 -r-x getSubmoduleIds String[] : String(appid),String(moduleid)
23:16:18 -r-x isActiveVersion Boolean : String(appid)
23:16:18 -r-x isAdminMode Boolean : String(appid),String(java.lang.String)
23:16:18 -r-x preDeregister Void :
23:16:18
23:16:18 dr-- AppRuntimeStateRuntime
23:16:18
23:16:18 Undeploying application App1 ...
23:16:18 Started the undeployment of Application. Please refer to the returned WLSTProgress object or variable LAST to track the status.
23:16:33 Current Status of your Deployment:
23:16:33 Deployment command type: undeploy
23:16:33 Deployment State : failed
23:16:33 Deployment Message : java.lang.IllegalArgumentException: [J2EE Deployment SPI:260134]Unable to identify application for undeploy operation.
23:16:33 deployment failed
23:16:33 java.lang.IllegalArgumentException: [J2EE Deployment SPI:260134]Unable to identify application for undeploy operation.

Is is always possible the that space (clusters) on the hard drive have been used to store other data and in such a case you can't recover the original content of the file.
If you encounter such freeze issues regularly then best is to choose the "Show my windows and tabs from last time" startup setting.
You an try to create a new profile as a test to check if Session Restore work better in the new profile.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

System Image Utility 10.6.3 - fails when creating NetBoot image from DVD

System Image Utility 10.6.3, trying to create a NetBoot image from a bundled installer disc that came with a 27" Late 2009 iMac (iMac11,1). Image creation fails consistently, since the image that System Image Utility creates is only 901M.
Anyone see this before?
Don
--------- System Image Utility log ----------
Workflow Started (2010-06-16 14:03:02 -0700)
Starting action: Define Image Source
Finished running action: Define Image Source
Starting action: Create Image
Starting image creation process...
Create NetBoot Image
Initiating NetBoot from Install Media.
Creating working path at /Library/NetBoot/NetBootSP0/NetBoot of Mac OS X Install DVD
Creating disk image (Size: 901 MB)
Finalizing disk image.
created: /Library/NetBoot/NetBootSP0/NetBoot of Mac OS X Install DVD/NetBoot.dmg
Attaching disk image
Installing to destination volume
2010-06-16 14:03:38.126 installer[2365:6f03] Looking for system packages
2010-06-16 14:03:38.129 installer[2365:6f03] no system packages found
2010-06-16 14:03:38.130 installer[2365:6f03] No or Invalid system receipts found on /private/tmp/mnt.LjFArn
2010-06-16 14:03:38.130 installer[2365:6f03] Attempting fallback using: /System/Library/PrivateFrameworks/SystemMigration.framework/Resources/FallbackS ystemFiles.plist
2010-06-16 14:03:38.175 installer[2365:6f03] Finding system files...
2010-06-16 14:03:38.619 installer[2365:6f03] Writing system path cache.
2010-06-16 14:03:38.623 installer[2365:6f03] Error writing cache to /private/tmp/mnt.LjFArn/Library/Caches/com.apple.FindSystemFiles.plist
2010-06-16 14:03:38.625 installer[2365:6f03] Failed to enumerate /tmp/mnt.LjFArn/Library/Caches, cannot prune (
"com.apple.userpictureCache"
installer: Package name is Mac OS X
installer: Installing at base path /private/tmp/mnt.LjFArn
installer: The install failed (There is not enough space on this disk to install the selected items. Deselect at least 6.46 GB and try again.)
Script is done.
NetBoot creation failed.
Image creation process finished...
Stopping image creation.
Image creation failed.

Brian Nesse wrote:
Hi Don, here's my guess...
The 901 number is additional space added in the scripts. This indicates that the source image size was 0.
Since you are making a NetBoot from Install media, under the covers the installer process is being run to create a NetBoot volume. The media shipped with the 27" iMac is most likely CPU specific and thus the installation fails because you are trying to create the image (i.e. install the system) on an unsupported CPU.
In order to produce a NetBoot from the install media, you'll have to create it on the 27" iMac.
Hi Brian,
Thanks for the response. This makes perfect sense. I'll give this a try and shout back!
Thanks,
Don

CopyProfile fails when image deployed

Similar Messages

Maybe you are looking for