Core 1 usb audio interface not supported by OS x 10.10?

Today I bought a Alesis Core 1 USB audio interface in order to connect my guitar to my mac and garageband.
My mac Book pro (with Yosemite) does not pass through any signal from my guitar.
Is this a known problem? Do I need to install another driver, and where can I get this?

The photos are located in your iPhoto Library package which, by default, is located in your Pictures folder and is independent of the application. 
What system are you running?  If it's anything earlier than Yosemite you won't be able to download iPhoto as the only version available from the App Store is 9.6 which only works with Yosemite.

Similar Messages

  • USB Audio Interface not working anymore

    I have a Presonus Audiobox USB Audio Interface. Worked perfectly until I updated to Mavericks, now I get a screeching noise when used and the sound switches to the built in Mac sound.
    So then I reboot and it does it again. The Audio box doesnt have any software since its a plug and play. Any help?

    Hi ketpiano!
    I have an article here for you that may help you resolve this issue:
    Macintosh: Solutions for noise in the audio signal
    http://support.apple.com/kb/HT2743
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

    I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

    MUYconfundido wrote:
    Pancenter,
    Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
    The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
    Thoughts?
    Thanks,
    Tristan
    Tristan...
    This is what you have, correct?
    http://www.alesis.com/usbmidicable
    This from Alesis..
    "The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
    Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
    My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
    pancenter-

  • Live Capture with a camera via firewire and usb audio interface

    I am trying to do a live capture through Final Cut 7.
    I want the video feed through the firewire from my HVX200 and the audio feed from a 4 channel usb audio interface (Alesis iO4).
    When I have both audio and video input coming in from the HVX200, the live capture works fine.
    However, when I change the audio input so that it is coming from the usb audio interface, final cut has an error message saying "Video is not available."
    During the preview, I see the video clearly and am getting levels from the iO4.
    But when I try to capture, I get the error message.
    Is it a processor issue (I've attached my specs below) with problems handling 2 separate inputs?
    I'm not quite sure what the problem is.
    Any input is greatly appreciated.
    Thanks!
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,3
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.66 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz

    Hi MtD,
    Yes I am changing the Capture preset to iO4.  Once that happens, it lets me run both the camera and the iO4 into the laptop but then an error message pops up the moment I try to capture it.
    I was only trying to use 3 out of the 4 channels of the iO4.
    Thanks!

  • Audio error with garageband and external usb audio interface

    I am using Garageband 2.0.3. under ios 8.0.2 on my iPad 3 and via camera adapter a USB audio interface Focusrite Scarlett 2i4 or a Presonus iTwo.
    When I start Garageband, it works well, the audio interfaces are recognized and I can record a track.
    As soon as I switch from instrumtent to track view, the audio path is completely disturbed and all I can hear is some noise from the speaker.
    Then I have to unplug the usb cable and plug it in again. Then audio works until I switch back to the instrument menu.
    When I use the headphone output only there is no problem with Garageband and everything works fine.
    Other applications audio applications don't show any error with each of the two audio interfaces.
    Any feedback is very much appreciated, thanks.
    Harald

    I have this exact issue.  However, I tried the Loopy app after after GB crashed and received an error message saying that core audio is not available.  Rebooting resolves but the problem repeats.  Any suggestions as to fixes?  Btw; I have no such problem with Ipad 2 and ios 7.

  • USB Audio Interface Mystery

    I have an HP Envy TouchSmart m7.  Purchased it with Win 8 and upgraded to Win 8.1 update 1 (with August 2014 update).
    No issues with the exception of a USB device.  I normally have not used any USB devices - no USB keyboard, no USB printer, etc.. I have used a USB mouse once in a blue moon - but I do use a USB audio interface for my MIDI keyboard regularly.
    It works fine until I connect a cable from any of the outputs to a mixer or amp.  Within minutes, I hear a click and my audio driver stops responding as if the device rebooted - I'm assuming because of a USB power or data drop-out.  I've replaced my audio interface, tried different power sources, different locations, all types of surge strips, modified power settings, replaced mixers, upgraded my BIOS, checked Windows updates, been talking with the maker of my audio interface (who even sent me custom drivers) and talking with the makers of my music software - all of them are at wits end saying to simply use another computer.
    Help - help and help!  I cannot perform with my audio interface not working.  I have to connect it in order to hear sound.  Everything seems to point to hardware on my laptop.  Any ideas or fixes for this laptop?
    Thanks,
    Chris

    Hello,
    AS I stated earlier - the maker of the problematic device (which has a solid reputation) has sent me new drivers that aren't widely available although the drivers seemed and still seem solid and I've never mentioned nor had an issue with latency.  Although you said I didn't mention updating any of the drivers, I may have inferred it by saying I installed any and all Windows updates which included drivers.
    I have worked with PC's for 20 years, building, supporting, programming, etc.. I have seen a plethora of problems that run the gamut of easy to very complex and even to unexplainable - which I usually don't accept.. lol.  This laptop runs smooth and I've tuned it up as my main music machine but this issue runs pretty deep and on the surface I can't see a driver issue, no latency issues and no updates pending for anything.  What has my curiousity and perhaps I've not been as detailed as I shoud have been but that this problem does NOT occur and may never have  occurred if I only used headphones.  It only happens when a cable - any cable - is plugged up from my audio device to another device like a mixer or amp.
    That's why I explored grouding issues, electrical possibilities etc.  This may be a complex combination of several factors.  Maybe a USB issue, along with a driver and/or even a deep OS issue along with grounding?
    Thanks for the link to Windows 8 Tuning Tips for Audio processing but honestly, I had already performed these modifications way before I found that article and read it even before you posted the link.  But thanks for being thorough.
    I'd actually be happy if I had to address some clicking or popping - but a complete failure when only cables are connected?  What can I do in the cabling to prevent surges?  I hate to purchase expensive equipment to troubleshoot this, find a surge issue only to have to purchase another laptop, audio interface or something.  Throwing more money at it for only troubleshooting purposes doesn't seem pleasant to me.
    I have blue screen logs, memory dump files, etc which have been handed over to Focusrite and still nothing.  I'd like to install Win 10 on it to see if this reoccurs or drop back to Win 7.  I don't know what to do,,,  my first audio interface device to fulfill my dreams of playing live performances and I hit this.. Agh!!!
    Frustrated but still willing to troubleshoot,
    Thanks,
    Chris

  • Firewire or usb audio interface/hardrive?

    Hello everyone sorry if this has been answered elsewhere.
    I'm thinking of running Logic 9 on a macbook pro with 1 firewire 800 and 2 USB ports. I wish to use an audio interface and an external hard drive (probably a G DRIVE).
    The hard drive can use Firewire 800, Firewire 400 or USB. Should I a) Plug the Hard drive into the firewire 800 port and buy a USB audio interface?
                                                                                                   or b) Plug the Hard drive into the USB port and buy a Firewire 400 interface?
    Thanks.

    Hi rewinder,
    I use a USB Apogee One, and I'm very happy with it: very good and clean sound, not too expensive.
    Depending on your budget, you can also consider the Apogee Duet, which supports 2 inputs at the same time.
    Sometimes I use a firewire 800 hardisk, works very well.
    Hope this help,
    Vignus

  • Can i use my usb audio interface with apple tv? For example Focusrite 2i2

    can i use my usb audio interface with apple tv? For example Focusrite 2i2

    Afraid not - AppleTV does not support USB audio devices.
    I assume you don't mean using the device as an optical input for the computer, connecting AppleTV's optical out to it.

  • Will Garageband on an IMAC with OS 10.7 work with a  Tascam us-600 USB audio interface

    I need a USB audio interface to read in DAT tapes from a Tascam DA20 recorder. I want to use the S/PDIF digital output from the recorder.  Has anyone used the Tascam US-600 with the IMAC and Garageband?  Any other recommendations for a USB interface that will accommodate S/PDIF as well as XLR Mic inputs for under $200?

    Been there, done that.
    I can select the device (US-144), but I do not get any choice for the output channel. The default is to go the analog channel ( channels 1 and 2).
    However - I did find a workaround. There is an opensource package called Soundflower:
    http://code.google.com/p/soundflower/
    From the description:
    "Soundflower is a MacOS system extension that allows applications to pass audio to other applications. Soundflower is easy to use, it simply presents itself as an audio device, allowing any audio application to send and receive audio with no other support needed."
    This allows me to set the output channel for garage band (and any other app, e.g. itunes) to the digital S/PDIF output.
    It would be nice if this functionality was built in to Mac OS X...
    Warren

  • Emagic emi 26 audio interface not working

    I want to turn my old dell inspiron 8100 PIII 1.2 Ghz / 512 MB RAM into my sound center, attached to active loudspeakers and a huge USB external harddrive.
    Running arch linux and recently did pacman -Suy.
    The internal sound card is broken, I only get distorted sounds (in windows as well).
    I want to use my a bit dated emagic emi 26 usb audio interface.
    The linux installations has (the exact paths are maybe different, writing from another machine now):
    /lib/modules/2.6.27-9-generic/kernel/drivers/usb/misc/emi26.ko
    /lib/firmware/emi26
    So it seems the interface is supported.
    However, when I plug it in, nothing happens. Some LEDs light up on the interface,
    but /proc/asound/cards only shows my Maestro3 sound card, also alsamixer
    doesn't see the device.
    If I enter "lsusb", the terminal hangs, no Ctrl-C helps! I can't even kill -9 it as root!
    I have snd_usb_audio and emi26 in my MODULES in rc.conf, while having
    !audio and !usb_midi there too.
    lsmod shows that emi26 is loaded, as well as snd_usb_audio.
    Does anybody have an idea on how to go about this?
    I guess there must be some problem with the driver...
    Thanks for any help

    Hello,
    "and now I cannot get sound out of my interface, even after trying to unistall that program and reinstall my interface driver"
    Try using AppZapper: http://www.apple.com/downloads/macosx/systemdiskutilities/appzapper.html
    This way you make sure you have UNinstalled all the associated files.
    Carolyn

  • USB audio interface

    Hey guys,
    I have a USB audio interface and I'm not sure how to get it working on Arch. It actually randomly started working one day when my sound settings in gnome started to show more than just "Digital Output (S/PDIF) - Built-in Audio" for possible output devices. One of those extra devices sent audio to the interface. Those entries just disappeared though and I'm not sure how to get them back. I'm using ALSA.
    I'm not sure what additional information you may need.
    Thanks

    Have you looked on the ALSA wiki about USB sound devices?
    https://wiki.archlinux.org/index.php/Ad … ound_cards

  • My audio interface not working with my IMac

    My audio interface not working with my IMac

    Have you tried > Apogee Electronics > Apogee Support & Product Downloads

  • Audio input setup with a USB audio interface

    When i plug my USB audio interface into the USB port, GB gives me a message that it has been detected, and it shows up in the audio input preferences.
    But it doesn't seem to be listening. Signals light up on the interface when i speak into the mike, but not on my GB.
    I also switched to the device I'm using in my Mac input sound preferences.
    Hints, anyone?

    Nothing - it's a new project. Thought maybe I ought to get the input device working before starting.

  • My roland Ua-25ex usb audio interface audio input no recognised by macbook pro running osx 10.

    my roland Ua-25ex usb audio interface audio input not recognised by macbook pro running osx 10. ...the audio outputs are ok but the (audio in) input preference  for the UA-25ex is greyed out and the sliders for input volume etc  are disabled ... and I can only record voice by using the macbook pros onboad microphone not the usb interface 

    Logic Users
    Looooong Tutorial for beginners
    MacPro Videos on Logic
    i have all the logics but i don't know them deeply.
    i like some of the music files/loops you get bundled with it, there's plenty to get started.

  • No input using usb audio interface

    I recently bought a Tascam US-1641 USB Audio Interface that Im running with logic studio 8. I'm not getting any audio coming through when recording. I have selected the item in preferences but im not getting any input or output.
    anyone had similar problems or know where i might have made a stupid error.
    David Docherty

    Hi
    Firstly, sorry for not being able to help as I share the same problem.
    I've recently bought a novation nio 2/4 audio interface for logic pro 8.
    I have the same problem with getting sound from it. What are you trying to record e.g. instrument?
    I also have a usb midi keyboard that I plugged straight in and got sound through logic straight away so I don't know why the audio interface should be much different.
    Please let me know if you happen to stumble across an answer as it is driving me crazy!

Maybe you are looking for