CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1

I'm getting this warning in the log window of the debugger:
     CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
In Xcode 5, what is the correct way to set CA_DEBUG_TRANSACTIONS=1 in the environment?
Thanks in advance to all for any info.

Found it - http://nshipster.com/launch-arguments-and-environment-variables/

Similar Messages

  • HT5621 How do i delete an icloud account and set up a new account with icloud if i dont no the old accounts password

    How do i delete an icloud account to set up a new icloud account if you dont know the old accounts password

    Welcome to the Apple community Amber
    If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
    You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

  • [4712] WARNING!!! 'Huh, you set a test object to itself... whats up with dat?' Line 601 in function in file .\tstobj2\ObjArray.cpp

    I'm using TestStand 4.0 and anytime I try to intialize my chasis this message shows up in my debugg viewer. I would appriciate any feedback. I have no idea what could be triggering this message or why it's worded the way it is.
    [4712] WARNING!!! 'Huh, you set a test object to itself... whats up with dat?' Line 601 in function  in file .\tstobj2\ObjArray.cpp

    You've hit what was intended to be an internal development warning, but apparently the warning macro used is not compiled out in the release.
    This has likely been there since TestStand 1.0 and is nothing to worry about. In most cases it indicates you've called SetPropertyObject or SetPropertyObjectByOffset to set an object that was already set in the specified location. This is a harmless NOP and the warning only appears in attached debuggers, but it "might" be an indication that you have made a programming error.
    I launched and exited the 4.0 sequence editor without seeing this warning, so I don't know if it is being triggered by your code module (or sequence, or custom step type, or custom UI, or custom process  model, ...) or another part of TestStand that you are using.  Chances are good that this warning does not indicate a functional problem. However, if you can reproduce it with a clean uncustomized TestStand install, I'd like to know how you did it.
    I've entered a corrective action request to remove this warning.
    Message Edited by James Grey on 09-13-2007 10:12 AM

  • Geotagging - how can I edit new places that I have previously created but with typos, errors etc?  How do I delete a place I have set up?

    Geotagging - how can I edit new places that I have previously created but with typos, errors etc?  How do I delete a place I have set up?  Then I could create a new, correct entry.  I'm using iPhoto '09.

    Is it OK to reply to my own question?? Thanks to the related posts that appeared AFTER I'd made the post above, I learnt about the 'Manage my places' item under the Windows menu. I felt a bit dumb not knowing this.
    BUT it doesn't completely resolve the issue.  The info shown in the EXIF (using opt-cmd-I) under Places has the place name I choose, but it is followed by a few other lines that are incorrect and do not seem to be anything to do with any data I can see under 'Manage my places'.
    Can anyone explain where these other entries might come from, and how to edit them?

  • Warning in Windows server 2012 R2 Set-VMReplication with Enable Write Order Preservation Across Disks 1

    When I run the following command I get the following warning? Can anyone help out with this?  
    Set-VMReplication -VMName server123 -EnableWriteOrderPreservationAcrossDisks 1
    WARNING: 'EnableWriteOrderPreservationAcrossDisks' is not required for 'Set-VMReplication'.
    Please mark my post as helpful or the answer or better yet.... both! :) Thanks!

    I have this issue. I have given my DCs and DHCP servers fixed IPv6 addresses, and every time I enable an IPv6 scope the all get a second IPv6 address from the scope, which is also published do DNS and then the next time I reboot a domain controller there
    is complete confusion.
    My objectives (which I am finding hard to achieve) are:
    - fixed IP addresses for all systems (in IPv4 I use static IPs on servers and DHCP reservations on workstations)
    - I control the gateways. If my official gateways are down I want no connectivity to the Internet, I don't want anything configuring itself.
    CarolChi

  • I have a facebook account set up to iphoto so it automatically opens that facebook when i want to upload pics. but i want to delete the current account and set it up with a new one. how do i do it? help!!!

    i have a facebook account set up to iphoto so it automatically opens when i go to share photos via facebook, but i want to delete the current one and set it up to a different account, how do i do it? helpp!!!!

    iPhoto > Preferences > Accounts

  • Too long url error when emailing thread with replies

    There is apparently a bug in the "email thread with replies" feature.
    I tried emailing myself this thread and it returned this error:
    Request-URI Too Large
    The requested URL's length exceeds the capacity limit for this server.
    Apache/2.2.3 (Red Hat) Server at discussions.apple.com Port 80
    No surprise it did either. Look at what it was trying to send.
    http://discussions.apple.com/mailpost.jspa?messageID=4435127&toEmailName=me&toEm ailAddress=emailaddy%40someisp.net&fromEmailName=emailaddy&fromEmailAddress=emailaddy%40someother_isp&email Subject=AppleDiscussions%3A+Panther+security+update+2007%2F4+and+Airport+Extreme&originalMess age=The+following+was+posted+on+Apple+Discussions.%0D%0AOn+Fri+Apr+20+05%3A16%3A 47+CDT+2007%2C+WillParton+wrote%3A+%0D%0ASubject%3A+Panther+security+update+2007 %2F4+and+Airport+Extreme%0D%0A%0D%0AI%27ve+just+installed+the+2007%2F4+security+ update+and+it+seems+to+be+causing+wireless+connectivity+problems+with+my+Airport +Extreme+basestation.+On+power+up+my+Powerbook+G4+connects+to+my+Airport+Extreme +basetation+%28V5.6%29+successfully+but+looses+the+connection+after+a+period+of+ time+%2820-30+minutes%29.+Attempts+to+reconnect+%28using+WPA+Personal+security%2 9+result+in+a+message+stating+the+basestation+does+not+support+this+security+opt ion+%28which+it+obviously+does%29.%3Cbr%3E%3Cbr%3EAnyone+else+seen+any+similar+p roblems%3F%3Cbr%3E%3Cbr%3E%3Cspan+class%3Dotherinfo%3EPowerbook+G4+Titanium+++Ma c+OS+X+%2810.3.9%29+++%3C%2Fspan%3E%0D%0A%0D%0A%0D%0A----%0D%0AOn+Fri+Apr+20+07% 3A16%3A29+CDT+2007%2C+kathieg+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+u pdate+2007%2F4+and+Airport+Extreme%0D%0A%0D%0AInterestingly+enough%2C+I+too+expe rienced+connectivity+problems+once+I+ran+the+security+update.+I+have+two+compute rs+that+I+updated+last+night.+One+running+OS+10.4.9+and+the+other+running+10.3.9 .+They+both+use+Airport+%28not+extreme%29.+The+OS+10.4.9+had+no+problems+at+all+ connecting+via+airport.+The+OS+10.3.9+couldn%27t+see+the+network+at+all.+Followi ng+the+advice+of+another+poster%2C+I+removed+my+WEP+password.+I+wish+I+didn%27t+ have+to+do+that%2C+but+I+need+my+internet+connection+today%21%0D%0A%0D%0A----%0D %0AOn+Fri+Apr+20+07%3A51%3A37+CDT+2007%2C+Don_Michele1+wrote%3A+%0D%0ASubject%3A +Re%3A+Panther+security+update+2007%2F4+and+Airport+Extreme%0D%0A%0D%0ASimilar+p roblem+here%3A+after+install+of+sec+upd+4-2007+in+G3+iBook+800%2FPanther+a+kerne lpanic+is+appearing+after+waking+up+from+sleepmode.+paniclog+in+console+is+repor ting%3A%3Cbr%3E%3Cbr%3E%3Cbr%3E%22Unresolved+kernel+trap%28cpu+0%29%3A+0x300+-+D ata+access+DAR%3D0x0000000000000050+PC%3D0x000000000041D08C%3Cbr%3ELatest+crash+ info+for+cpu+0%3A%3Cbr%3E+++Exception+state+%28sv%3D0x2E0F4C80%29%3Cbr%3E++++++P C%3D0x0041D08C%3B+MSR%3D0x00009030%3B+DAR%3D0x00000050%3B+DSISR%3D0x40000000%3B+ LR%3D0x22FB74CC%3B+R1%3D0x0F4EB8D0%3B+XCP%3D0x0000000C+%280x300+-+Data+access%29 %3Cbr%3E++++++Backtrace%3A%3Cbr%3E+++++++++0x22FB74B8+0x00000000+0x00256EBC+0x00 257938+0x002531D8+0x00253040+0x0041D034+0x00408EA0+%3Cbr%3E+++++++++0x0040124C+0 x00405DE8+0x004080A0+0x00408034+0x0026A610+0x00035148+0x00035028+%3Cbr%3E++++++K ernel+loadable+modules+in+backtrace+%28with+dependencies%29%3A%3Cbr%3E+++++++++c om.apple.driver.AirPortFirmware%283.4.9%29%400x22fb6000%3Cbr%3E++++++++++++depen dency%3A+com.apple.driver.AppleAirPort%283.4.7%29%400x3ff000%3Cbr%3E+++++++++com .apple.driver.AppleAirPort%283.4.7%29%400x3ff000%3Cbr%3E++++++++++++dependency%3 A+com.apple.iokit.IONetworkingFamily%281.4.0%29%400x3e2000%3Cbr%3EProceeding+bac k+via+exception+chain%3A%3Cbr%3E+++Exception+state+%28sv%3D0x2E0F4C80%29%3Cbr%3E ++++++previously+dumped+as+%22Latest%22+state.+skipping...%3Cbr%3E+++Exception+s tate+%28sv%3D0x00956A00%29%3Cbr%3E++++++PC%3D0x00000000%3B+MSR%3D0x0000D030%3B+D AR%3D0x00000000%3B+DSISR%3D0x00000000%3B+LR%3D0x00000000%3B+R1%3D0x00000000%3B+X CP%3D0x00000000+%28Unknown%29............%22%3Cbr%3E%3Cbr%3ECan+anybody+help%3F% 0D%0A%0D%0A----%0D%0AOn+Sat+Apr+21+00%3A22%3A13+CDT+2007%2C+DIXIE+wrote%3A+%0D%0 ASubject%3A+Re%3A+Panther+security+update+2007%2F4+and+Airport+Extreme%0D%0A%0D% 0AIf+after+installing+Security+Update+2007-004+on+OS10.3.9+and+after+waking+from +Sleep+you+experience+a+kernel+panic+notification+%28black+pane%29+to+reboot+wit h+the+power+button+.........+do+the+following%3A%3Cbr%3E%3Cbr%3EReboot+....+then +apply+%2FApp%2FUtilities%2FDisk+Utility%2FRepair+Permissions+....+shut+down+... .+Reboot+while+holding+down+Command-Option-P-R+keys+together+until+the+computer+ chimes+three%283%29+individual+times+...+release+keys+to+complete+reboot+....+Re pair+Permissions+again+...+click+the+soft+Restart+....+Sleep+the+computer+then+w ake+it+up+....+the+kernel+panic+pane+should+be+gone.%3Cbr%3E%3Cbr%3EIt+worked+fo r+me+and+I+never+before+had+a+panic+pane+on+a+15%22FP+iMac%21+%3Cbr%3E%3Cbr%3EDI XIE+%3A%29+%3Cbr%3E%3Cbr%3E%3Cspan+class%3Dotherinfo%3E15%22iMacG4%2F800%2F60GHD %2F768MB-12%22PB%2F867%2F60GHD%2F1.12GB-G3%2F400%2F1GB+ +Mac+OS+X+%2810.3.9%29+  +AE+network%3C%2Fspan%3E%0D%0A%0D%0A----%0D%0AOn+Sat+Apr+21+12%3A17%3A40+CDT+200 7%2C+Don_Michele1+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+update+2007%2 F4+and+Airport+Extreme%0D%0A%0D%0AThanks+for+the+clue%2C+Dixie%2C+after+the+proc edure+it+seemed+to+work%2C+if+I+put+the+iBook+%3Cu%3Emanually%3C%2Fu%3E+to+sleep +and+%3Cu%3Ethen%3C%2Fu%3E+wake+it+up.+%3Cbr%3E%3Cbr%3EFor+some+reason+the+kerne l+panic+appears+again+after+waking+up%2C+when+I+let+the+iBook+%3Cu%3Eautomatical ly%3C%2Fu%3E+%28after+6+minutes%29+go+to+sleep.+What+a+hustle%21%3Cbr%3E%3Cbr%3E %3Cspan+class%3Dotherinfo%3EiBook+G3+800+ +Mac+OS+X+%2810.3.9%29+ +%3C%2Fspan%3E %3Cbr%3E%3Cbr%3Eupdate%3A+after+having+the+kernel+panic+again+after+automatic+sl eep+mode%2C+my+iBook+produces+a+kernel+panic+after+waking+up+again%2C+even+if+I+ had+closed+the+lid+or+had+put+it+manually+to+sleep.+No+advancement+at+all%21%0D% 0A%0D%0A----%0D%0AOn+Fri+Apr+20+09%3A19%3A56+CDT+2007%2C+dr.+te+wrote%3A+%0D%0AS ubject%3A+Re%3A+Panther+security+update+2007%2F4+and+Airport+Extreme%0D%0A%0D%0A Similar+on+my+iBook.+When+awaking+the+airport+menu+doesn´t+even+show+the+wireles s+networks.+After+restarting+Airport+works+well+until+the+next+time+in+suspend+m ode.%3Cbr%3E%3Cbr%3E%3Cspan+class%3Dotherinfo%3EiBook+G3+ +Mac+OS+X+%2810.3.9%29 + +%3C%2Fspan%3E%0D%0A%0D%0A----%0D%0AOn+Fri+Apr+20+17%3A09%3A28+CDT+2007%2C+Meg atokio+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+update+2007%2F4+and+AirP ort%0D%0A%0D%0Asame+here.%3Cbr%3Ei+have+a+2001+iBook+with+AirPort+card.%3Cbr%3Ea fter+this+update+the+reactivation+of+the+card+fails%2C+only+rebooting+helps.+%28 luckily+enough..%29%3Cbr%3E%3Cbr%3Ethis+is+what+the+system+log+says%3A%3Cbr%3E%3 Cbr%3E%3E%3E%3E%3Cbr%3EApr+20+22%3A47%3A29+localhost+kernel%3A+System+Wake%3Cbr% 3EApr+20+22%3A47%3A29+localhost+kernel%3A+Wake+event+0008%3Cbr%3EApr+20+22%3A47% 3A29+localhost+kernel%3A+AppleNMI+unmask+NMI%3Cbr%3EApr+20+22%3A47%3A29+localhos t+kernel%3A+ADB+present%3A8c%3Cbr%3EApr+20+22%3A47%3A29+localhost+kernel%3A+AirP ortDriver%3A+F%2FW+download+failed%3Cbr%3EApr+20+22%3A47%3A29+localhost+kextd%5B 84%5D%3A+a+different+version+of+dependency+extension+%2FSystem%2FLibrary%2FExten sions%2FAppleAirPort.kext+is+already+loaded%3Cbr%3EApr+20+22%3A47%3A29+localhost +kernel%3A+AirPortDriver%3A+F%2FW+download+failed%3Cbr%3E%3C%3C%3C%3Cbr%3E%3Cbr% 3EFirmware+download+failed.+I+hope+there+is+a+fix+very+fast.+%3Cbr%3E%3Cbr%3E+++ +++...+Kio+%21+%3Cbr%3E+++++++%3Cbr%3E%3Cbr%3E%3Cspan+class%3Dotherinfo%3EiBook+ G3+ +Mac+OS+X+%2810.3.9%29+ +%3C%2Fspan%3E%0D%0A%0D%0A----%0D%0AOn+Sat+Apr+21+15 %3A59%3A09+CDT+2007%2C+old+comm+guy+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+secu rity+update+2007%2F4+and+AirPort%0D%0A%0D%0AI+had+the+same+things+in+my+system+l og+after+the+update%2C+especially+the+FW+failure+to+load.++On+the+chance+that+th e+two+kernel+extensions+AppleAirPort.kext+and+AppleAirPort2.kext+might+be+in+a+c atfight%2C+I+removed+AppleAirPort2.kext+%28the+actually+older+file%29+from+the+e xtensions+folder+and+rebooted.++This+has+alleviated+the+no-airport+after+wakeup% 2C+at+what+price+I+do+not+know.%3Cbr%3E%3Cbr%3EThe+system+log+now+looks+like+thi s%2C+which+is+what+it+looked+like+before+the+update.%3Cbr%3E%3Cbr%3Elocalhost+ke rnel%3A+System+Sleep%3Cbr%3Elocalhost+kernel%3A+System+Wake%3Cbr%3Elocalhost+ker nel%3A+Wake+event+0008%3Cbr%3Elocalhost+kernel%3A+enableClockSpreading+returned+ with+0%3Cbr%3Elocalhost+kernel%3A+AppleNMI+unmask+NMI%3Cbr%3Elocalhost+kernel%3A +Sound+assertion+%220+%21%3D+err%22+failed+in+%22AppleLegacyAudio%2FAppleTexas2A udio%2FAppleTexas2Audio.cpp%22+at+line+960+goto+Exit%3Cbr%3Elocalhost+kernel%3A+ %10ADB+present%3A8c%3Cbr%3Elocalhost+kernel%3A+AirPortFirmware%3A+start+Sta+f%2F w+download%3Cbr%3Elocalhost+configd%5B115%5D%3A+executing+%2FSystem%2FLibrary%2F SystemConfiguration%2FKicker.bundle%2FContents%2FResources%2Fset-hostname%3Cbr%3 Elocalhost+configd%5B115%5D%3A+posting+notification+com.apple.system.config.netw ork_change%3Cbr%3E%3Cbr%3EThis+is+a+temporary+fix+with+unknown+consequences%2C+a nd+I+pass+the+information+on+as+another+hint+to+the+developers+in+Cupertino.%3Cb r%3E%3Cbr%3EBTW%2C+this+is+not+the+first+or+last+time+that+a+SW+bug+will+evade+t esting+and+make+it+to+the+wild%2C+no+matter+what+organization+is+involved.++Be+t hankful+they+are+as+few+and+far+between+as+they+are.%3Cbr%3E%3Cbr%3E%3Cspan+clas s%3Dotherinfo%3EG3+Blue%2F+Titanium+G4+ +Mac+OS+X+%2810.3.9%29+ +%3C%2Fspan%3E%0 D%0A%0D%0A----%0D%0AOn+Sat+Apr+21+16%3A35%3A06+CDT+2007%2C+Megatokio+wrote%3A+%0 D%0ASubject%3A+Re%3A+Panther+security+update+2007%2F4+and+AirPort%0D%0A%0D%0AHi+ old+comm+guy%2C%3Cbr%3E%3Cbr%3Ethis+is+exactly+as+things+look+like+on+my+ibook%2 7s+HD%2C+and+removing+one+.kext+seems+to+fix+the+problem.+Thanks+a+lot+for+this+ hint%21+Only+one+minor+problem+remains%2C+my+ibook+does+not+connect+with+the+%27 blessed%27+network+after+booting+or+wake+up%2C+i+currently+must+select+my+networ k+each+time.+But+it+is+95%25+fixed.+%3B-%29%3Cbr%3E%3Cbr%3E++...+kio+%21%3Cbr%3E %3Cbr%3E%3E+I+had+the+same+things+in+my+system+log+after+the%3Cbr%3E%3E+update%2 C+especially+the+FW+failure+to+load.++On+the%3Cbr%3E%3E+chance+that+the+two+kern el+extensions%3Cbr%3E%3E+AppleAirPort.kext+and+AppleAirPort2.kext+might+be+in%3C br%3E%3E+a+catfight%2C+I+removed+AppleAirPort2.kext+%28the%3Cbr%3E%3E+actually+o lder+file%29+from+the+extensions+folder+and%3Cbr%3E%3E+rebooted.++This+has+allev iated+the+no-airport+after%3Cbr%3E%3E+wakeup%2C+at+what+price+I+do+not+know.%0D% 0A%0D%0A----%0D%0AOn+Sat+Apr+21+20%3A15%3A31+CDT+2007%2C+old+comm+guy+wrote%3A+% 0D%0ASubject%3A+Re%3A+Panther+security+update+2007%2F4+and+AirPort%0D%0A%0D%0AMy +TiBook+was+doing+that+after+I+moved+from+10.2.8+to+10.3.9%2C+so+I+thought+nothi ng+of+it.+++However%2C+for+a+few+wakeups+after+removing+the+kext+file%2C+it+did+ connect+automatically+to+my+AirPort+on+wakeup%2C+as+it+had+done+in+10.2.8.++My+p reference+is+to+connect+to+my+own+base+station%2C+but+apparently+I+will+have+to+ continue+to+manually+select+the+station+when+I+open+up+the+book.++Not+really+a+p roblem.%3Cbr%3E%3Cbr%3E%3Cspan+class%3Dotherinfo%3EG3+Blue%2F+Titanium+G4+++Mac+ OS+X+%2810.3.9%29+++%3C%2Fspan%3E%0D%0A%0D%0A----%0D%0AOn+Sun+Apr+22+01%3A24%3A5 2+CDT+2007%2C+rwsniffin+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+update+ 2007%2F4+and+AirPort%0D%0A%0D%0AI+haved+the+original+PowerBook+%28with+upgrades% 29+and+had+the+same+problem+%28no+airport+connection+after+wake-up%29+after+this +morning%27s+security+update.+I+took+old+comm+guy%27s+suggestion+and+removed+the +%2FSystem%2FLibrary%2FExtensions%2FAppleAirPort2.kext+file.+It+took+much+longer +than+usual+to+boot+but+seems+to+work+fine.+I%27m+running+in+automatic+and+it+co nnects+to+the+only+network+it+can+find+in+my+house+without+any+intervention+from +me.+Thanks+old+comm+guy%21%0D%0A%0D%0A----%0D%0AOn+Sun+Apr+22+18%3A05%3A50+CDT+ 2007%2C+Victor+Oder+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+update+2007 %2F4+and+AirPort%0D%0A%0D%0AThanks%21%3Cbr%3EiBook+G3+300+is+not+my+most+used+Ma c%2C+but+the+only+one+running+Panther.%3Cbr%3ESo+I+wasn%27t+going+to+spend+a+lot +of+time+on+it.%3Cbr%3ETrashing+Appleairport2.kext+fixed+it.+I+did+nothing+furth er.%3Cbr%3EStill+there+after+sleep.+It+also+reads+out+the+network+name+when+I+wa ke+it+up.+It+hasn%27t+done+that+before.%3Cbr%3EThe+problem+is+solved+for+me.%3Cb r%3E%3Cbr%3E%3Cspan+class%3Dotherinfo%3EiMac+G5+ +Mac+OS+X+%2810.4.3%29+ +SE%2F3 0%2C+iMac+G3+700%2C+PBG4+Ti%2C+iBook+Tangerine.%3C%2Fspan%3E%0D%0A%0D%0A----%0D% 0AOn+Tue+May+01+01%3A21%3A53+CDT+2007%2C+ilaya+wrote%3A+%0D%0ASubject%3A+Re%3A+P anther+security+update+2007%2F4+and+AirPort%0D%0A%0D%0AThanks+for+the+method+to+ fix+the+security+update+snafu.%3Cbr%3E%3Cbr%3EI+found+the+kernel+after+a+while.+ For+others+not+as+savvy+as+you%2C+I+would+note+that+the+airport+extension+kernel +is+in+the+library+folder%2C+as+opposed+to+the+system+folder.%3Cbr%3E%3Cbr%3EI+h ope+this+does+it.%3Cbr%3E%3Cbr%3EI+guess+we+just+got+a+taste+of+what+windows+use rs+eat+too+often%2C+sloppy+work.%3Cbr%3E%3Cbr%3ETom%0D%0A%0D%0A----%0D%0AOn+Tue+ Apr+24+15%3A26%3A17+CDT+2007%2C+old+comm+guy+wrote%3A+%0D%0ASubject%3A+Re%3A+Pan ther+security+update+2007%2F4+and+AirPort%0D%0A%0D%0AJust+an+update+on+the+Apple Airport2.kext+removal+fix+on+my+TiBook.++As+originally+reported%2C+I+tried+the+f ix+at+about+1200+PDT+on+the+21st.++After+rebooting+at+that+time%2C+I+have+not+ex perienced+the+inability+to+connect+to+my+AirPort+network+after+wakeup%2C+and+mos t+of+the+time+the+reconnection+has+been+without+manual+intervention%2C+which+was +always+required+after+the+10.2.8+to+10.3.9+upgrade.%3Cbr%3E%3Cbr%3EAs+noted+ori ginally%2C+this+is+an+unknown+consequences+fix%2C+but+at+least+for+the+moment+it +has+gotten+me+back+in+the+water+for+three+days+now.%0D%0A%0D%0A----%0D%0AOn+Sat +Apr+21+13%3A35%3A26+CDT+2007%2C+Brianna+Sollandry+wrote%3A+%0D%0ASubject%3A+Re% 3A+Panther+security+update+2007%2F4+and+Airport+Extreme%0D%0A%0D%0AI%27ll+chime+ in+with+a+%22me+too%22.%3Cbr%3E%3Cbr%3EPowerbook+G4+with+10.3.9+and+plain+old+%2 8non+extreme%29+Airport+card%3Cbr%3EAfter+a+fresh+boot%2C+wireless+networks+show +up+on+my+Airport+menu.+I+can+connect+and+all+is+well.%3Cbr%3EBut+woe+betide+me+ if+the+computer+ever+goes+to+sleep%3A+after+it+wakes+up%2C+no+wireless+networks+ are+available.%3Cbr%3E%3Cbr%3E-+Turning+on+and+off+Airport%3A+no+effect%3Cbr%3E- +Logging+out+and+back+on%3A+no+effect%3Cbr%3E-+Reboot%3A+wireless+networks+are+a vailable+again+-+until+the+next+wakeup+from+sleep.%3Cbr%3E%3Cbr%3EThis+is+brand+ new+behavior+starting+immediately+after+installing+Security+Update+2007%2F4.%3Cb r%3E%3Cbr%3ESigh.%3Cbr%3E%3Cbr%3E%3Cspan+class%3Dotherinfo%3EPowerbook+G4+ +Mac+ OS+X+%2810.3.9%29+ +%3C%2Fspan%3E%0D%0A%0D%0A----%0D%0AOn+Tue+Apr+24+23%3A11%3A1 0+CDT+2007%2C+dbsantana+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+update+ 2007%2F4+and+Airport+Extreme%0D%0A%0D%0Athat+is+exactly+what+I+get+since+2007%2F 004+security+update.%3Cbr%3E%3Cbr%3EI+did+take+the+2.ktext+out+of+the+folder+but +am+unsure+whether+to+actually+delete+it.+In+any+event+it+hasn%27t+changed+anyth ing.%3Cbr%3E%3Cbr%3EIt%27s+very+annoying+to+have+to+reboot+every+time+the+comput er+goes+to+sleep.%0D%0A%0D%0A----%0D%0AOn+Fri+Apr+20+09%3A20%3A00+CDT+2007%2C+Wa lmo+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+update+2007%2F4+and+Airport +Extreme%0D%0A%0D%0AReading+about+the+problems+this+update+has+created+makes+me+ feel+fortunate+that+I+can%27t+even+load+it%21++Each+time+I+attempt+to+go+through +the+process+I+get+a+warning+sign+and+a+message+that+reads%2C%3Ci%3E+%22You+cann ot+install+this+software+on+this+volume+%28HD%29.++This+volume+does+not+meet+the +requirements+for+this+update.%22%3C%2Fi%3E++I%27m+still+operating+OS+X+10.3.9%2 C+but+this+update+is+supposed+to+cover+it.++Do+you+think+there+will+be+an+update +to+the+update%3F%3Cbr%3E%3Cbr%3E%3Cspan+class%3Dotherinfo%3EG4+Powerbook+ +Mac+ OS+X+%2810.3.9%29+ +%3C%2Fspan%3E%0D%0A%0D%0A----%0D%0AOn+Fri+Apr+20+10%3A42%3A5 1+CDT+2007%2C+Don_Michele1+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+upda te+2007%2F4+and+Airport+Extreme%0D%0A%0D%0AHope+there+will+be+an+update+for+the+ update.+the+interesting+thing+is%2C+if+after+a+reboot%2C+the+network+is+%3Cu%3En ot%3C%2Fu%3E+available%2C+there+will+be+no+probs+with+wake+up+after+sleep.+But+i f+Airport+networking+is+active%2C+immediate+crash+after+wake+up.%3Cbr%3E%3Cbr%3E As+I+told+before%2C+the+crashreporter+is+pointing+to%3A%3Cbr%3Ecom.apple.driver. AirPortFirmware%283.4.9%29+%400x22fb6000%3Cbr%3Ecom.apple.driver.AppleAirPort%28 3.4.7%29%400x3+ff000%3Cbr%3Ecom.apple.iokit.IONetworkingFamily%281.4.0+%29%400x3 e2000%3Cbr%3E%3Cbr%3ESo+I%27m+quite+sure%2C+the+sec+upd+4-2007+killed+my+airport +and+network+drivers%21%3Cbr%3E%3Cbr%3EBTW%3A+Apple+Customer+support+Germany+rec ommends+to+reinstall+the+complete+system%2C+great+idea.%0D%0A%0D%0A----%0D%0AOn+ Sat+Apr+21+11%3A18%3A33+CDT+2007%2C+CBcards+wrote%3A+%0D%0ASubject%3A+Re%3A+Pant her+security+update+2007%2F4+and+Airport+Extreme%0D%0A%0D%0AI+have+tried+to+down load+this+security+update+a+few+times+and+it+continually+stalls+while+it+is+in+p rogress.+Now+that+I+have+read+all+of+your+problems+related+to+it%2C+I+am+not+goi ng+to+bother+with+it+anymore.+Thankfully%2C+it+wouldn%27t+install+on+my+machine% 21+I+hope+you+all+get+your+problems+solved.%3Cbr%3E%3Cbr%3E%3Cbr%3E%3Cbr%3E%3Csp an+class%3Dotherinfo%3EG5+DP+ +Mac+OS+X+%2810.3.9%29+ +3.5gb+RAM%3C%2Fspan%3E%0D %0A%0D%0A----%0D%0AOn+Fri+Apr+20+10%3A59%3A04+CDT+2007%2C+gameduck+wrote%3A+%0D% 0ASubject%3A+Re%3A+Panther+security+update+2007%2F4+and+Airport+Extreme%0D%0A%0D %0AI+am+having+this+issue+as+well.++I+am+using+an+old+iBook+G3.++If+it+goes+to+s leep%2C+I+cannot+even+see+the+network.++Only+a+reboot+works.%3Cbr%3E%3Cbr%3EI+tr ied+giving+Keychain+access+for+the+Base+Station+to+all+apps+without+confirmation +in+Utilities%2C+but+it+says+the+Password+is+incorrect.++%3Cbr%3E%3Cbr%3EI+then+ turned+off+WEP+as+suggested+above%2C+same+problem.%3Cbr%3E%3Cbr%3EI+then+tried+d eleting+the+keychain+items+and+then+rebooting%2C+same+problem.%3Cbr%3E%3Cbr%3EI+ cannot+put+10.4+on+this+machine+due+to+no+dvd+or+firewire.%3Cbr%3E%3Cbr%3ESomeon e++PLEASE+HELP%21%0D%0A%0D%0A----%0D%0AOn+Fri+Apr+20+11%3A30%3A31+CDT+2007%2C+in lineplanet+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+update+2007%2F4+and+ Airport+Extreme%0D%0A%0D%0AAfter+installing+the+security+update+last+night+on+my +Powerbook+G3+%28firewire%29%2C+I+can+no+longer+connect+to+my+wireless+network.+ I+then+tried+connecting+using+my+dial-up+account%2C+and+I+once+again+could+not+c onnect.+The+tec+guy+at+my+internet+provider+said+the+computer+was+%22not+passing +traffic.%22+...+Is+there+a+way+to+remove+the+security+update%3F%0D%0A%0D%0A---- %0D%0AOn+Sat+Apr+21+00%3A05%3A01+CDT+2007%2C+PISMO+LIVES+wrote%3A+%0D%0ASubject% 3A+Re%3A+Panther+security+update+2007%2F4+and+Airport+Extreme%0D%0A%0D%0AAfter+i nstalling+the+security+update+last+night+on+my+Powerbook+G3+%28firewire%29%2C+I+ could+no+longer+connect+to+my+wireless+network+either.+It+was+as+if+the+Security +Update+had+diabled+my+wireless+card.%3Cbr%3E%3Cbr%3EI+accessed+this+thread+on+m y+G5+iMac+tonight+and+noted+someone%27s+comment+about+repairing+permissions.+%3C br%3E%3Cbr%3ESo+I+restarted+my+PISMO+in+single-user+mode+and+ran+Applejack.+I+ty ped+%22applejack+AUTO+restart%22+and+when+my+PISMO+restarted%2C+my+wireless+conn ection+was+back%2C+and+everything+is+fine.%3Cbr%3E%3Cbr%3EThanks+again+to+the+Ap plejack+people%3B+you%27ve+bailed+me+out+once+again%21%0D%0A%0D%0A----%0D%0AOn+S at+Apr+21+19%3A13%3A38+CDT+2007%2C+Nman+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+ security+update+2007%2F4+and+Airport+Extreme%0D%0A%0D%0AWorks%21++Great+suggesti on.++%22auto%22+or+%22AUTO%22+does+the+job.%3Cbr%3E%3Cbr%3E%3E+So+I+restarted+my +PISMO+in+single-user+mode+and+ran%3Cbr%3E%3E+Applejack.+I+typed+%22applejack+AU TO+restart%22+and+when%3Cbr%3E%3E+my+PISMO+restarted%2C+my+wireless+connection+w as+back%2C%3Cbr%3E%3E+and+everything+is+fine.%0D%0A%0D%0A----%0D%0AOn+Sat+Apr+21 +19%3A19%3A20+CDT+2007%2C+Matthew+Rossi+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+ security+update+2007%2F4+and+Airport+Extreme%0D%0A%0D%0AHello%2C%3Cbr%3E%3Cbr%3E I+have+having+this+problem+as+well.+I+have+an+iBook+G3+500Mhz+running+10.3.9+and +when+it+wakes+from+sleep+there+it+doesn%27t+find+my+Wireless+connections+until+ I+reboot.+I+know+my+router+is+fine+because+I+have+many+other+devices+that+use+wi reless.%3Cbr%3E%3Cbr%3EI+hope+a+fix+is+found+for+this+soon.%0D%0A%0D%0A----%0D%0 AOn+Sat+Apr+21+21%3A49%3A18+CDT+2007%2C+LonesomeMac+wrote%3A+%0D%0ASubject%3A+Re %3A+Panther+security+update+2007%2F4+and+Airport+Extreme%0D%0A%0D%0AThanks%2C+PI SMO%3B+this+seems+to+have+worked+for+me%2C+at+least+for+the+last+few+hours+anywa y.++I%27ve+put+my+PowerBook+through+several+sleep+cylces+of+varying+lengths+with +no+AirPort+problems+so+far.%3Cbr%3E%3Cbr%3EI+ran+Applejack+per+instructions+%28 single-user+mode%2C+%22a%22+for+auto%2C+manual+reboot%29.++Site%3A+%3Ca+href%3D% 22http%3A%2F%2Fapplejack.sourceforge.net%22%3EApplejack%3C%2Fa%3E%3Cbr%3E%3Cbr%3 EWorth+a+try+if+nothing+else+has+worked+for+you.++I+have+an+AirPort+card%2C+no+b ase+station.%3Cbr%3E%3Cbr%3E---------%3Cbr%3E%3Cbr%3E%3E+After+installing+the+se curity+update+last+night+on+my%3Cbr%3E%3E+Powerbook+G3+%28firewire%29%2C+I+could +no+longer+connect+to%3Cbr%3E%3E+my+wireless+network+either.+It+was+as+if+the+Se curity%3Cbr%3E%3E+Update+had+diabled+my+wireless+card.%3Cbr%3E%3E+%3Cbr%3E%3E+I+ accessed+this+thread+on+my+G5+iMac+tonight+and%3Cbr%3E%3E+noted+someone%27s+comm ent+about+repairing+permissions.%3Cbr%3E%3E+%3Cbr%3E%3E+So+I+restarted+my+PISMO+ in+single-user+mode+and+ran%3Cbr%3E%3E+Applejack.+I+typed+%22applejack+AUTO+rest art%22+and+when%3Cbr%3E%3E+my+PISMO+restarted%2C+my+wireless+connection+was+back %2C%3Cbr%3E%3E+and+everything+is+fine.%3Cbr%3E%3E+%3Cbr%3E%3E+Thanks+again+to+th e+Applejack+people%3B+you%27ve+bailed%3Cbr%3E%3E+me+out+once+again%21%3Cbr%3E%3C br%3E%3Cbr%3E%3Cspan+class%3Dotherinfo%3EPowerBook+500+MHz+PPC+G3+ +Mac+OS+X+%28 10.3.9%29+ +%3C%2Fspan%3E%0D%0A%0D%0A----%0D%0AOn+Wed+Apr+25+11%3A11%3A20+CDT+20 07%2C+Hanuman+Hoffman+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+update+20 07%2F4+and+Airport+Extreme%0D%0A%0D%0ASince+I+got+my+TiBook+new+in+early+2003%2C +I+have+never+had+a+problem+with+any+updates.+Always+repairing+permissions.+%3Cb r%3EI+downloaded+update+Sec004+and+waited+and+watched+this+thread+before+install ing.%3Cbr%3EBased+on+%22Pismo+Lives%22+I+downloaded+applejack+and+installed.%3Cb r%3EI+have+two+external+clones+of+my+system%2C+so+I+installed+the+Sec004+on+one+ of+them+knowing+I+had+safety+net.+%3Cbr%3EAfter+the+install%2C+I+had+wireless+si gnal.+I+put+system+to+sleep+and+upon+waking%2C+signal+was+gone+and+had+kernel+pa nic+message+to+reboot.%3Cbr%3EI+rebooted+and+had+airport+until+sleep+and+waking. +No+kernel+panic+this+time.%3Cbr%3ERebooted%2C+repaired+permissions+with+same+re sults.%3Cbr%3ENo+wireless.+Not+a+router+%28D-link%29+issue+as+my+Pismo+was+unaff ected.%3Cbr%3ERebooted+in+Single+User+Mode+and+ran+%27applejack%27+in+auto+mode. %3Cbr%3E%3Cbr%3ESUCCESS.+%3Cbr%3E%3Cbr%3EI+have+put+to+sleep+numerous+times+and+ left+in+sleep+mode+overnight+without+any+failures.%3Cbr%3E%3Cbr%3EWill+now+updat e+main+system.+Still+have+another+clone%2C+just+in+case.%3Cbr%3E%3Cbr%3EThanks+P ismo%21%3Cbr%3EThanks+Applejack%2C+I+am+definitely+contributing+there.%3Cbr%3ETh anks+to+all+contributing+here.%3Cbr%3E%3Cbr%3E%3Cspan+class%3Dotherinfo%3E15%22+ G4+PB+Titanium+1ghz+1gb+RAM+120gb+HD+ +Mac+OS+X+%2810.3.9%29+ +Pismo+400+512k+RA M+40Gb+HD+10.3.9%3C%2Fspan%3E%0D%0A%0D%0A----%0D%0AOn+Fri+Apr+20+12%3A49%3A39+CD T+2007%2C+gameduck+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+update+2007% 2F4+and+Airport+Extreme%0D%0A%0D%0ASOLVED+for+me%21%3Cbr%3E%3Cbr%3EI+called+Appl e+and+got+a+high+level+tech+on+the+phone.++He+said+that+the+Security+Update+has+ tighter+Wireless+Security+and+works+differently+with+Panther+than+with+Tiger.++T he+Tiger+OS+handles+security+differently+and+thus+no+issues+for+them.%3Cbr%3E%3C br%3EHere+is+what+he+had+me+do%3A%3Cbr%3E%3Cbr%3E1%29++Go+to+Network+Preferences %2C+Airport.++Manually+delete+the+old+Network+name+that+is+in+the+box.++Then%2C+ manually+type+in+the+name+again+and+password+if+necessary.%3Cbr%3E%3Cbr%3E2%29++ Restart+computer%3Cbr%3E%3Cbr%3EThat+worked+for+me+even+after+waking+from+sleep+ until+I+turned+WEP+back+on%2C+then+the+issue+came+back.%3Cbr%3E%3Cbr%3ESo+he+had +me+do+the+same+thing+in+steps+1+and+2+again+%28re-add+network+name+and+restart% 29+and+now+it+is+working+fine+again+after+sleeping+and+restarts.%3Cbr%3E%3Cbr%3E I+am+using+%27Join+a+specific+Network%27+but+he+said+%27Automatic%27+would+be+th e+same+procedure.%3Cbr%3E%3Cbr%3EHe+then+game+me+some+tips+on+these+issues%3A%3C br%3E%3Cbr%3E1%29++After+a+%27Security+Update%27%2C++delete+the+old+network+you+ are+using+from+%27Network+Preferences%27+and+then+re-add+it+manually.++After+tha t%2C+restart+the+computer.++%3Cbr%3E%3Cbr%3E2%29++If+you+update+the+Base+Station %2C+do+the+same+thing+afterwards++%28delete+the+old+network+you+are+using+from+% 27Network+Preferences%27+and+then+re-add+it+manually.++After+that%2C+restart+the +computer%29.+%3Cbr%3E%3Cbr%3EIf+you+do+not+do+these+steps%2C+the+computer+uses+ the+old+network+settings+and+will+not+see+the+network.%3Cbr%3E%3Cbr%3EAnyhow+I+h ope+this+helps+someone.%0D%0A%0D%0A----%0D%0AOn+Fri+Apr+20+13%3A02%3A03+CDT+2007 %2C+gameduck+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+update+2007%2F4+an d+Airport+Extreme%0D%0A%0D%0Anever+mind%2C+the+issue+came+back+after+waking.++Cr ap.%3Cbr%3E%3Cbr%3ECan+anyone+help+here%3F%0D%0A%0D%0A----%0D%0AOn+Fri+Apr+20+13 %3A08%3A47+CDT+2007%2C+roam+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+upd ate+2007%2F4+and+Airport+Extreme%0D%0A%0D%0AHi+you+guys%2C%3Cbr%3E%3Cbr%3EYou+co uld+try+going+a+bit+further+and+resetting+Airport+as+detailed+here%3A%3Cbr%3E%3C a+href%3D%22http%3A%2F%2Fdocs.info.apple.com%2Farticle.html%3Fartnum%3D108044%22 %3Ehttp%3A%2F%2Fdocs.info.apple.com%2Farticle.html%3Fartnum%3D108044%3C%2Fa%3E%3 Cbr%3E%3Cbr%3Eor+resetting+Airport+base+station%2C%3Cbr%3E%3Ca+href%3D%22http%3A %2F%2Fdocs.info.apple.com%2Farticle.html%3Fartnum%3D107451%22%3Ehttp%3A%2F%2Fdoc s.info.apple.com%2Farticle.html%3Fartnum%3D107451%3C%2Fa%3E%3Cbr%3E%3Cbr%3EI+hop e+that+helps.%3Cbr%3E%3Cbr%3Eregards+roam%0D%0A%0D%0A----%0D%0AOn+Fri+Apr+20+13% 3A19%3A32+CDT+2007%2C+WillParton+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+securit y+update+2007%2F4+and+Airport+Extreme%0D%0A%0D%0AAfraid+Gameduck%27s+suggestion+ didn%27t+work+for+me+either.+I%27ve+also+power-cycled+the+basestation%2C+but+tha t+made+no+difference.+%3Cbr%3E%3Cbr%3E%3Cspan+class%3Dotherinfo%3EPowerbook+G4+T itanium+++Mac+OS+X+%2810.3.9%29+++%3C%2Fspan%3E%3Cbr%3E%3Cbr%3E%3Cspan+class%3Do therinfo%3EPowerbook+G4+Titanium+++Mac+OS+X+%2810.3.9%29+++%3C%2Fspan%3E%0D%0A%0 D%0A----%0D%0AOn+Fri+Apr+20+14%3A18%3A45+CDT+2007%2C+gameduck+wrote%3A+%0D%0ASub ject%3A+Re%3A+Panther+security+update+2007%2F4+and+Airport+Extreme%0D%0A%0D%0AWe ll%2C+I+got+another+guy+on+the+phone+and+we+did%3A%3Cbr%3E%3Cbr%3EPMU+Reset%3Cbr %3E%3Cbr%3ERepair+Permissions%3Cbr%3E%3Cbr%3Etrashed+Home%2Flibrary%2Fkeychains+ folder%3Cbr%3E%3Cbr%3EIt+seems+to+be+working+now%2C+but+who+knows+for+how+long.% 3Cbr%3E%3Cbr%3ENext+step+he+said+was+a+Repair+Disc+from+the+OSX+Panther+Disc+1%2 C+then+an+Archive+Install+if+that+doesnt+work.%3Cbr%3E%3Cbr%3ECripes.%0D%0A%0D%0 A----%0D%0AOn+Fri+Apr+20+16%3A27%3A40+CDT+2007%2C+Forbidden+Donut+wrote%3A+%0D%0 ASubject%3A+Re%3A+Panther+security+update+2007%2F4+and+Airport+Extreme%0D%0A%0D% 0ASame+problems+too+after+putting+the+thing+to+sleep.++My+network+just+disappear s+and+can%27t+connect+unless+I+restart.+%3Cbr%3E%3Cbr%3EAlso%2C+if+I+try+to+log+ out+or+switch+to+a+different+user%2C+the+computer+freezes+and+I+have+to+unplug+t he+computer+to+restart.++Anyone+else+have+this+experience%3F++%3Cbr%3E%3Cbr%3EWh at+the+**%21++Are+we+turning+in+to+a+PC%3F%0D%0A%0D%0A----%0D%0AOn+Fri+Apr+20+17%3A38%3A5 9+CDT+2007%2C+gameduck+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+update+2 007%2F4+and+Airport+Extreme%0D%0A%0D%0AAlright%2C+I+think+I+finally+have+this+fi xed.%3Cbr%3E%3Cbr%3EAfter+doing%3A%3Cbr%3E%3Cbr%3EManual+re-add+of+the+network+i n+Net+Pref%3Cbr%3E%3Cbr%3Erestart%2C+then%3A%3Cbr%3E%3Cbr%3EBase+Station+passwor d+change+and+Reset%3Cbr%3E%3Cbr%3EAnother+Manual+re-add+of+the+network+in+Net+Pr ef%3Cbr%3E%3Cbr%3EAnother+Restart%3Cbr%3E%3Cbr%3EPMU+Reset%3Cbr%3E%3Cbr%3ERepair +Permissions%3Cbr%3E%3Cbr%3ETrashed+Home%2Flibrary%2Fkeychains+folder%3Cbr%3E%3C br%3EIt+then+seemed+to+be+working+on+the+%27Automatic%27+setting+in+Net+Pref.%3C br%3E%3Cbr%3EAfter+getting+my+Panther+Disc+1%2C+and+calling+Apple+again+to+see+i f+I+needed+to+use+Disc+Repair%2C+I+then+talked+to+a+third+guy+who+was+a+Network+ Specialist.++%3Cbr%3E%3Cbr%3EHe+said+that+it+should+be+set+on+%27Join+a+Specific +Network%27+in+Net+Prefs+if+you+are+using+your+home+Network+and+only+have+one+ne twork.++So%2C++I+did+that%2C+entered+the+Network+password%2C+applied+that%2C+res tarted+and+have+not+had+the+issue+since%2C+even+after+a+reboot+and+hours+of+waki ng+it.%3Cbr%3E%3Cbr%3EHe+said+also+that+these+Security+Updates+are+not+tested+on +old+hardware+%28ie%2C+my+iBook+G3+graphite%29.++He+said+that+by+installing+thes e+updates%2C+you+are+rolling+the+dice+that+it+may+cause+an+issue.%3Cbr%3E%3Cbr%3 EI+personally+am+not+doing+any+more+Security+Updates+EVER%21%3Cbr%3E%3Cbr%3EI+am +not+sure+if+it+was+the+steps+above%2C+or+simply+trashing+the+Keychains+and+then +setting+the+specific+network%2C+and+neither+are+the+Apple+people.%3Cbr%3E%3Cbr% 3EI+will+check+back+if+it+returns.%0D%0A%0D%0A----%0D%0AOn+Fri+Apr+20+18%3A30%3A 12+CDT+2007%2C+Forbidden+Donut+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+ update+2007%2F4+and+Airport+Extreme%0D%0A%0D%0AUnbelievable%21+How+is+it+that+th ey+suggest+we+update+our+computer+and+then+tell+us+it+hasn%27t+been+tested+on+th e+%22older%22+ones.++3.9+is+not+that+out+of+date.%3Cbr%3E%3Cbr%3EIf+that%27s+the +case%2C+they+should+not+make+these+updates+show+up++older+OS+X+versions.++%3Cbr %3E%3Cbr%3EDoes+this+mean+there+will+be+no+patch+to+fix+our+problem+and+we+are+s tuck+with+it+since+our+system+is+no+longer+supported%3F%0D%0A%0D%0A----%0D%0AOn+ Fri+Apr+20+18%3A43%3A40+CDT+2007%2C+DonMichele1+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+update+2007%2F4+and+Ai rport+Extreme%0D%0A%0D%0AI+will+not+hope+so%21+%3Cbr%3E%3Cbr%3EAfter+2+successfu l+%22wakeups%22+after+sleep+same+situation+as+before%3A+Kernelpanic+and+crashlog +reports+mentioning+airport+driver+and+airport+firmware+failed+to+be+loaded.+%3C br%3E%3Cbr%3EPlease%2C+Apple%2C+fix+this%2C+maybe+you+forgot+that+the+iBook+G3+8 00+comes+only+with+an+airport+standard+11+MB+card%3F%3Cbr%3E%3Cbr%3EIt%27s+my+fi rst+time+with+such+a+severe+failure+with+a+security+update.%0D%0A%0D%0A----%0D%0 AOn+Fri+Apr+20+20%3A15%3A28+CDT+2007%2C+weing+wrote%3A+%0D%0ASubject%3A+Re%3A+Pa nther+security+update+2007%2F4+and+Airport+Extreme%0D%0A%0D%0AThis+is+a+real+dra g+.+I+have++some++older++g+3+laptops+I+use+for+specific+tasks+that++i+don%27t+ru n+10.4+on+.+%3Cbr%3E+I+get+it+if+you+are+trying+to+kluge+a+OS+into+a+machine+tha t+doesnt+meet+the+system+requirements+that+its+tough+luck++.+But+if+it++can+nati vley+load+the+OS%2C+they+should+test.++I+would+guess+Apple+has+less+than+40+piec es+of+hardware+they+would+have+to+test+that++this+might+be+a+issue+on+.%3Cbr%3E+ Sorry++Apple+.+No+excuse.%0D%0A%0D%0A----%0D%0AOn+Sat+Apr+21+10%3A16%3A50+CDT+20 07%2C+Bob+Bujic+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+update+2007%2F4 +and+Airport+Extreme%0D%0A%0D%0AGameduck%3A+%3Ci%3E%22I+personally+am+not+doing+ any+more+Security+Updates+EVER%21%22%3Cbr%3E%3C%2Fi%3E%3Cbr%3EI+do+agree+with+yo u.+Previous+security+upgrade+killed+10.3.9+on+an++Wallstreet+II+where+Panther+wa s+installed+using+XPostFacto.+All+previous+updates+on+that+machine+went+smoothly .%3Cbr%3E%3Cbr%3EThis+new+screw+up+is+%27not+allowed%27+in+a+Mac+world.+When+I+t hink+of+apple%2C+I+don%27t+think+of+a+lemon.%3Cbr%3E%3Cbr%3ESory+for+the+troll.% 3Cbr%3E%3Cbr%3EBob%0D%0A%0D%0A----%0D%0AOn+Sat+Apr+21+14%3A54%3A40+CDT+2007%2C+J ianli+Dai+wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+update+2007%2F4+and+A irport+Extreme%0D%0A%0D%0AGameduck%2C%3Cbr%3EWhich+keychains+folder+did+you+tras h%3F+there+is+one+in+the+HD%3Alibrary.+there+is+another+in+my+user%3A+library.%3 Cbr%3EThis+mess+reminds+me+how+apple+trashed+users+with+os9%2C+10.1+%2C+10.2+and +now+10.3.%0D%0A%0D%0A----%0D%0AOn+Sat+Apr+21+16%3A19%3A45+CDT+2007%2C+gameduck+ wrote%3A+%0D%0ASubject%3A+Re%3A+Panther+security+update2007%2F
    p.s. I previewed this thread and used the p class="code" for the html tags around these long urls. Doesn't that work anymore or am I misremembering the permitted tag?

    Thanks for your answer,
    It's an web application made in Oracle ALBPM and which uses JSPs to entering data. The insert is made on the database object inside the ALBPM studio:
    INSERT INTO <<ALBPM SQLQuery object>> ( field-1,field-n) VALUES ( value-1 value-n) );
    I read the link you posted, but I'm still confused. I did the following:
    SELECT  FIELD, LENGTH(FIELD), LENGTHB(FIELD)
    FROM    TABLE
    I was expeting to get a larger value in LENGTHB(FIELD), but the values are equal. I can only insert 2000 characters from the application, so, I was expecting a LENGTHB 2x greater than LENGTH(FIELD).

  • Fnd_request.submit_request issue with PA_SRS_DATES2 value set.

    Hi,
    We are applications 12.0.6 with 10.2.0.3.0 database. I'm trying to submit the "PRC: Generate Draft Revenue for a Single Project" through fnd_request.submit_request and is erroring out with "PA: Error - Entered Accrue through date is not within open/future PA period". I'm able to run the same program from the application with the same parameters. I'm passing Accue date of 2009/08/31 00:00:00 from the program and I can see the same value when submitted frm the applications also.
    Value set for this Accrue date parameter is "PA_SRS_DATES2". It is setup as format type "Standard Date" and maximum size is 11.
    Thanks for your help,
    Shree.
    Here is the script
    SELECT TO_CHAR (rec1.per_end_date, 'RRRR/MM/DD HH24:MI:SS')
    INTO v_rev_accrue
    FROM DUAL;
    fnd_file.put_line (fnd_file.LOG,
    'Revenue Accrue Date is :' || v_rev_accrue
    fnd_file.put_line (fnd_file.LOG, 'Parameters for GDR :');
    fnd_file.put_line (fnd_file.LOG,
    'Argument1 is :' || TO_CHAR (rec1.project_id)
    fnd_file.put_line (fnd_file.LOG, 'Argument4 is :' || v_rev_accrue);
    v_fc_req_id :=
    fnd_request.submit_request (application => 'PA',
    program => 'PARGDR_SINGLE',
    sub_request => FALSE,
    start_time => NULL,
    argument1 => rec1.project_id,
    argument2 => 'N',
    argument3 => 'Y',
    argument4 => v_rev_accrue,
    argument5 => NULL,
    argument6 => NULL,
    argument7 => NULL,
    argument8 => NULL,
    argument9 => NULL,
    argument10 => NULL,
    argument11 => 'Y',
    argument12 => 'N',
    argument13 => NULL,
    argument14 => NULL,
    argument15 => NULL,
    argument16 => NULL,
    argument17 => NULL,
    argument18 => 'N',
    argument19 => 'N',
    argument20 => 'N'
    IF NVL (v_fc_req_id, 0) = 0
    THEN
    gv_debug_name :=
    'Error in Submitting the draft revenue program program. ';
    fnd_file.put_line (fnd_file.LOG, gv_debug_name);
    RAISE general_error;
    ELSE
    COMMIT;
    fnd_file.put_line (fnd_file.LOG,
    'draft revenue program. Request Id:'
    || TO_CHAR (v_fc_req_id)
    END IF;
    Here is the log for the request submitted via fnd_request.submit_request.
    Projects: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    PARGDR_SINGLE module: PRC: Generate Draft Revenue for a Single Project
    Current system time is 13-AUG-2009 18:59:19
    Entering parmai()
    ...Connected to Oracle
    Accrue Thru date from Command line is : 2009/08/31 00:00:00
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Executing request completion options...
    Finished executing request completion options.
    PA: Error - Entered Accrue through date is not within open/future PA period
    Exceptions posted by this request:
    Concurrent Request for "PRC: Generate Draft Revenue for a Single Project" has completed with error.
    Concurrent request completed
    Current system time is 13-AUG-2009 18:59:20
    Here is the log for the request submitted via the application
    Projects: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    PARGDR_SINGLE module: PRC: Generate Draft Revenue for a Single Project
    Current system time is 10-AUG-2009 17:12:11
    Entering parmai()
    ...Connected to Oracle
    Accrue Thru date from Command line is : 2009/08/31 00:00:00
    project:196 delete:N regenerate:Y acc_thru_dt:2009/08/31
    start project: end project:
    Operating unit is 153Revenue is running in Normal revenue mode
    Revenue is not based on specific project type...
    Revenue is not based on specific organization...
    Revenue is not based on specific customer...
    Revenue is not based on specific Agreement...
    Revenue is running for MCB/Non MCB projects...
    Revenue is running for Unrelease revenue mode...
    Revenue is not creating the detail report ...
    Revenue Processing Parameter List
    =================================
    -------------- < parameter list > -----------------------
    Accru Through Date ----------------------------------------> 2009/08/31
    Project ID ------------------------------------------------> 196
    From Project Number --------------------------------------->
    To Project Number ----------------------------------------->
    Adjusting Revenue Run -------------------------------------> No
    Project Type ID -----------------------------------------> 0
    Organization ID ------------------------------------------> 0
    Customer ID ----------------------------------------------> 0
    Agreement ID ----------------------------------------------> 0
    Multi Currency Projects -----------------------------------> No
    Release Draft Revenue -------------------------------------> No
    Include Detail Report -------------------------------------> No
    -------------- < End of parameter list > -----------------------
    ...Request ID = 714111
    This concurrent request is not being rescheduled
    Current system time is 10-AUG-2009 17:12:11
    ...about to delete revenue for project id 196
    ...0 draft revenues deleted
    Current system time is 10-AUG-2009 17:12:11
    ...about to process adjustments
    SELECT p.project_id, p.segment1,
    p.distribution_rule, p.project_level_funding_flag,p.project_currency_code,
    p.project_bil_rate_date_code,
    p.project_bil_rate_type,
    to_char(p.project_bil_rate_date,'YYYY/MM/DD'),
    p.project_bil_exchange_rate,
    p.projfunc_currency_code,
    p.projfunc_bil_rate_date_code,
    p.projfunc_bil_rate_type,
    to_char(p.projfunc_bil_rate_date,'YYYY/MM/DD'),
    p.projfunc_bil_exchange_rate,
    p.revproc_currency_code,
    p.funding_rate_date_code,
    p.funding_rate_type,
    to_char(p.funding_rate_date,'YYYY/MM/DD'),
    p.funding_exchange_rate,
    p.multi_currency_billing_flag,
    p.assign_precedes_task,
    p.enable_top_task_customer_flag,
    p.enable_top_task_inv_mth_flag,
    nvl(p.inv_by_bill_trans_curr_flag, 'N'),
    nvl(p.revtrans_currency_type, 'PROJ_FUNC_CURR_ONLY')
    FROM pa_projects p, pa_project_types t
    WHERE p.project_id = :project_id
    AND pa_project_utils.check_prj_stus_action_allowed(p.project_status_code,'GENERATE_REV') = 'Y'
    AND :start_project_number||'x' != :end_project_number||'y'
    AND p.project_type = t.project_type
    AND t.project_type_class_code = 'CONTRACT'
    AND EXISTS (SELECT /*+ INDEX(pf pa_summary_project_fundings_u1)*/ NULL
    FROM pa_summary_project_fundings pf
    WHERE pf.project_id = p.project_id
    AND nvl(pf.revproc_baselined_amount, 0) != 0)
    AND NOT EXISTS
    (SELECT NULL
    FROM pa_draft_revenues r2
    WHERE r2.project_id = p.project_id
    AND r2.released_date||'' is null
    AND r2.generation_error_flag||'' = decode(:mass_gen,
    1, 'Y', r2.generation_error_flag)
    AND (EXISTS (SELECT NULL
    FROM pa_expenditure_items_all i
    WHERE i.project_id = p.project_id
    AND i.cost_distributed_flag ||''= 'Y'
    AND i.revenue_distributed_flag = 'N'
    AND i.expenditure_item_date
    <= NVL(TO_DATE(:acc_thru_dt,'YYYY/MM/DD'),sysdate)
    AND (EXISTS (SELECT /*+ LEADING(l)*/ NULL
    FROM pa_draft_revenues r, pa_cust_rev_dist_lines l
    WHERE r.project_id = i.project_id
    AND ((l.expenditure_item_id = i.adjusted_expenditure_item_id AND i.adjusted_expenditure_item_id is not null )
    OR (l.expenditure_item_id = i.expenditure_item_id))
    AND NVL(l.reversed_flag,'N') = 'N'
    AND l.line_num_reversed IS NULL
    AND r.project_id = l.project_id
    AND r.draft_revenue_num = l.draft_revenue_num
    AND (r.released_date||'' is not null
    OR r.generation_error_flag||'' = decode(:mass_gen,
    1, 'N', 'E')))
    or exists (
    select 1 from pa_expenditure_items ei2
    where ei2.project_id = i.project_id
    and ei2.expenditure_item_id=i.adjusted_expenditure_item_id
    and ei2.revenue_distributed_flag='Y'
    and ei2.raw_revenue=0))
    union all
    SELECT /*+ LEADING(v)*/NULL
    FROM pa_events v
    WHERE v.project_id = p.project_id
    AND ((v.revenue_distributed_flag = 'N'
    AND v.completion_date
    <= NVL(TO_DATE(:acc_thru_dt,'YYYY/MM/DD'),sysdate))
    OR (substr(p.distribution_rule,1,4) = 'COST'
    AND v.revenue_distributed_flag = 'Y'
    AND v.completion_date
    > NVL(TO_DATE('2009/08/31','YYYY/MM/DD'), sysdate)))
    AND (DECODE(NVL(v.bill_trans_rev_amount, 0), 0 ,
    DECODE(NVL(v.zero_revenue_amount_flag, 'N'), 'Y', 1, 0),1) = 1)
    AND NVL(revenue_hold_flag, 'N') = 'N'
    AND EXISTS (
    SELECT NULL
    FROM pa_tasks t
    WHERE v.task_id is not NULL
    AND t.ready_to_distribute_flag = 'Y'
    AND v.task_id = t.task_id
    UNION ALL
    SELECT NULL
    FROM pa_tasks t1
    WHERE v.task_id is NULL
    AND t1.ready_to_distribute_flag = 'Y'
    AND v.project_id = t1.project_id )
    AND Exists (select null from pa_draft_revenues r,pa_cust_event_rev_dist_lines l
    where l.project_id = v.project_id
    AND ( l.task_id = v.task_id OR v.task_id is NULL )
    AND l.event_num = v.event_num
    AND NVL(l.reversed_flag,'N') = 'N'
    AND l.line_num_reversed IS NULL
    AND r.project_id = v.project_id
    AND r.draft_revenue_num = l.draft_revenue_num
    AND (r.released_date||'' is not null
    OR r.generation_error_flag||'' = decode(:mass_gen,
    1, 'N', 'E')))
    union all
    SELECT /*+ USE_CONCAT */ NULL
    FROM PA_Billing_Extensions be, PA_Billing_Assignments bea
    WHERE bea.active_flag = 'Y'
    AND bea.billing_extension_id = be.billing_extension_id
    AND (bea.project_id = p.project_id
    OR bea.project_type = p.project_type
    OR bea.distribution_rule = p.distribution_rule)
    AND be.calling_process in ('Revenue','Both')
    AND nvl(be.call_after_adj_flag, 'N') = 'Y'
    AND be.trx_independent_flag = 'Y'))
    Current system time is 10-AUG-2009 17:12:11
    ...0 projects processed for adjustments
    Current system time is 10-AUG-2009 17:12:11
    ...about to generate revenue for project id 196
    ...Fetching next project
    Current system time is 10-AUG-2009 17:12:11
    ...about to call pa_billing.bill_ext_driver( 196, 'Revenue', 'PRE', '2009/08/31', 714111 )
    Current system time is 10-AUG-2009 17:12:11
    ...exiting pa_billing.bill_ext_driver( 196, 'Revenue', 'PRE', '2009/08/31', 714111 )
    Current system time is 10-AUG-2009 17:12:11
    Leaving pauoarchn()
    ...no rows to process for this project.
    Current system time is 10-AUG-2009 17:12:11
    ...generated revenue for project id 196, number 72DM000001
    ...about to call pa_billing.bill_ext_driver( 196, 'Revenue', 'REG', '2009/08/31', 714111 )
    Current system time is 10-AUG-2009 17:12:11
    ...exiting pa_billing.bill_ext_driver( 196, 'Revenue', 'REG', '2009/08/31', 714111 )
    Current system time is 10-AUG-2009 17:12:11
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    l_inv_by_btc_flag is ...N
    l_mcb_flag is ...Y
    l_rpc_code is ...GBP
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    ...Else loop 1
    ...else loop 2
    ...else loop 4
    ...else loop 5
    ...non_zero_amount
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    ...Else loop 1
    ...else loop 2
    ...else loop 4
    ...else loop 5
    ...non_zero_amount
    Leaving pauoarchn()
    Leaving pauoarchn()
    Leaving pauoarchn()
    Current system time is 10-AUG-2009 17:12:11
    ...generated revenue for automatic events for project id 196, number 72DM000001 calling loc REG
    ...about to call pa_billing.bill_ext_driver( 196, 'Revenue', 'POST-REG', '2009/08/31', 714111 )
    Current system time is 10-AUG-2009 17:12:11
    ...exiting pa_billing.bill_ext_driver( 196, 'Revenue', 'POST-REG', '2009/08/31', 714111 )
    Current system time is 10-AUG-2009 17:12:11
    Current system time is 10-AUG-2009 17:12:11
    ...generated revenue for automatic events for project id 196, number 72DM000001 calling loc POST-REG
    ...about to call pa_billing.bill_ext_driver( 196, 'Revenue', 'POST', '2009/08/31', 714111 )
    Current system time is 10-AUG-2009 17:12:11
    ...exiting pa_billing.bill_ext_driver( 196, 'Revenue', 'POST', '2009/08/31', 714111 )
    Current system time is 10-AUG-2009 17:12:11
    ...Fetching next project
    Current system time is 10-AUG-2009 17:12:11
    Current system time is 10-AUG-2009 17:12:11
    ...about to call AutoAccounting
    Current system time is 10-AUG-2009 17:12:11
    Current system time is 10-AUG-2009 17:12:11
    Current system time is 10-AUG-2009 17:12:11
    Current system time is 10-AUG-2009 17:12:11
    Entering pafvsu
    Allocating pafvcs structure
    Allocating memory for structure, fdfkai
    Allocating memory for structure, fdfkao
    Allocating flex input and output structure
    Assigning ptype
    Calling pagtfn
    Nullig out
    Setting everything that does not need to be allocated
    Allocating optional arrays
    Checking a_line_id
    Checking a_trans_ind
    Checking a_param_lst
    Checking a_extra_atr
    Allocating required array
    Allocating auto accounting elements
    Describing kff and control processing options
    Tune flex validation system options
    Allocate main cache
    Allocate additional memory for main cache
    Allocate ksv if needed
    Store pointer to text strings in last ksv element so we can free later
    val [¿], segval [00000000]
    val [00000000], segval [000000]
    val [000000], segval [7210OCOA01]
    val [7210OCOA01], segval [0000]
    val [0000], segval [72OXLFTG]
    val [72OXLFTG], segval [66101010]
    val [66101010], segval [7210]
    Current system time is 10-AUG-2009 17:12:11
    Current system time is 10-AUG-2009 17:12:11
    Current system time is 10-AUG-2009 17:12:11
    Current system time is 10-AUG-2009 17:12:11
    Current system time is 10-AUG-2009 17:12:11
    Current system time is 10-AUG-2009 17:12:11
    Current system time is 10-AUG-2009 17:12:11
    Current system time is 10-AUG-2009 17:12:11
    ...returned from AutoAccounting
    ...about to update pe_expenditures_all for intercompany processing
    Current system time is 10-AUG-2009 17:12:11
    Entering parddl()
    ...setting error codes and bad code combination id to null
    ... Update draft revenues for marking autoaccounting error if any
    Current system time is 10-AUG-2009 17:12:11
    0 rows updated.
    ... Update draft revenues without generation error to normal state
    Current system time is 10-AUG-2009 17:12:11
    1 rows updated.
    ... Update pa_cust_event_rev_dist_lines for setting bad CCID to null
    Current system time is 10-AUG-2009 17:12:11
    0 rows updated.
    ... Update pa_events for marking AutoAccounting error if any
    Current system time is 10-AUG-2009 17:12:11
    0 rows updated.
    ... Update pa_events for setting revenue_distributed_flag to 'N'
    Current system time is 10-AUG-2009 17:12:11
    0 rows updated.
    ... Update pa_cust_rev_dist_lines for setting bad CCID to null
    Current system time is 10-AUG-2009 17:12:11
    0 rows updated.
    ... Update pa_expenditure_items_all for marking AutoAccounting error if any
    Current system time is 10-AUG-2009 17:12:11
    0 rows updated.
    ... Update pa_expenditure_items_all for setting revenue_distributed_flag to 'N'
    Current system time is 10-AUG-2009 17:12:11
    0 rows updated.
    Leaving parddl()
    Current system time is 10-AUG-2009 17:12:11
    Current system time is 10-AUG-2009 17:12:11
    0 rows updated with Generation error due to ccid=-1
    Current system time is 10-AUG-2009 17:12:11
    0 rows updated with Generation error PA_REV_GEN_ERROR
    Current system time is 10-AUG-2009 17:12:11
    ...1 projects processed for revenue generation
    Deleting automatic event for which revenue has generation error
    Current system time is 10-AUG-2009 17:12:11
    ...about to update proj summary funding amounts
    executing pa_billing.check_spf_amounts('B',196, , ) Calling check_spf_amounts...Inside the Single projects If
    Current system time is 10-AUG-2009 17:12:11
    ...about to generate reports
    SEL-SUC:72DM000001 4 1048 AP Exploration Operating DML 101 31-AUG-09 121659.83
    Current system time is 10-AUG-2009 17:12:12
    ...completed generating reports
    Process completed.
    0 rows deleted from distribution_warnings table.
    Start of log messages from FND_FILE
    Request id is :714111
    Before calling the insert event for top task_id :19839
    Parameters to the insert event API :
    Revenue amount is :12106.73
    Bill amount is :12106.73
    Project id is :196
    Event Type is :BILLING
    Top Task id is :19839
    organization id is :239
    completion date is :31-AUG-2009
    event description is :Financing Fee
    Return status after calling insert event is :0
    error message after calling insert event is :
    Before calling the insert event for top task_id :14612
    Parameters to the insert event API :
    Revenue amount is :109553.1
    Bill amount is :109553.1
    Project id is :196
    Event Type is :BILLING
    Top Task id is :14612
    organization id is :239
    completion date is :31-AUG-2009
    event description is :Expenditure
    Return status after calling insert event is :0
    error message after calling insert event is :
    End of log messages from FND_FILE
    Executing request completion options...
    ------------- 1) PRINT   -------------
    Printing output file.
    Request ID : 714111
    Number of copies : 0
    Printer : noprint
    Finished executing request completion options.
    Concurrent request completed successfully
    Current system time is 10-AUG-2009 17:12:12
    ---------------------------------------------------------------------------

    Duplicate thread.
    fnd_request.submit_request error with PA_SRS_DATES2 value set
    fnd_request.submit_request error with PA_SRS_DATES2 value set

  • Warning: Procedure created with compilation errors.

    I am trying to upload a pdf file into a blob column of a table. I get this error with these three ways of doing that:Warning: Procedure created with compilation errors.
    Any ideas why?
    -- THE STORAGE TABLE FOR THE IMAGE FILE
    ALTER TABLE PDM
    DROP PRIMARY KEY CASCADE;
    DROP TABLE PDM CASCADE CONSTRAINTS;
    CREATE TABLE PDM (
    DNAME VARCHAR2(30), -- DIRECTORY NAME
    SNAME VARCHAR2(30), -- SUBDIRECTORY NAME
    FNAME VARCHAR2(30), -- FILE NAME
    IBLOB BLOB); -- IMAGE FILE
    -- CREATE THE PROCEDURE TO LOAD THE FILE
    CREATE OR REPLACE PROCEDURE LOAD_FILE (
    PDNAME VARCHAR2,
    PSNAME VARCHAR2,
    PFNAME VARCHAR2) IS
    SRC_FILE BFILE;
    DST_FILE BLOB;
    LGH_FILE BINARY_INTEGER;
    BEGIN
    SRC_FILE := BFILENAME('PDF_DIR', '266-5210.pdf');
    -- INSERT A NULL RECORD TO LOCK
    INSERT INTO PDM
    (DNAME, SNAME, FNAME, IBLOB)
    VALUES
    (PDNAME, PSNAME, PFNAME, EMPTY_BLOB())
    RETURNING IBLOB INTO DST_FILE;
    -- LOCK RECORD
    SELECT IBLOB
    INTO DST_FILE
    FROM PDM
    WHERE DNAME = PDNAME
    AND SNAME = PSNAME
    AND FNAME = PFNAME
    FOR UPDATE;
    -- OPEN THE FILE
    DBMS_LOB.FILEOPEN(SRC_FILE, DBMS_LOB.FILE_READONLY);
    DBMS_LOB.OPEN(DST_FILE, DBMS_LOB.LOB_READWRITE);
    -- DETERMINE LENGTH
    LGH_FILE := DBMS_LOB.GETLENGTH(SRC_FILE);
    -- READ THE FILE
    DBMS_LOB.LOADFROMFILE(DST_FILE, SRC_FILE, LGH_FILE);
    -- UPDATE THE BLOB FIELD
    UPDATE PDM
    SET IBLOB = DST_FILE
    WHERE DNAME = PDNAME
    AND SNAME = PSNAME
    AND FNAME = PFNAME;
    -- CLOSE FILE
    DBMS_LOB.FILECLOSE(SRC_FILE);
    END LOAD_FILE;
    -- THE STORAGE TABLE FOR THE IMAGE FILE
    ALTER TABLE PDM
    DROP PRIMARY KEY CASCADE;
    DROP TABLE PDM CASCADE CONSTRAINTS;
    CREATE TABLE PDM
    FNAME VARCHAR2(1000)
    ,IBLOB BLOB
    -- CREATE THE PROCEDURE TO LOAD THE FILE
    CREATE OR REPLACE PROCEDURE LOAD_FILE AS (
    SRC_FILE BFILE := BFILENAME('PDF_DIR', '262-2827.pdf');
    DST_FILE BLOB;
    BEGIN
    -- INSERT A NULL RECORD TO LOCK
    INSERT INTO PDM
    (FNAME, IBLOB)
    VALUES
    ('262-2827.pdf', EMPTY_BLOB())
    RETURNING IBLOB INTO DST_FILE;
    -- OPEN THE FILE
    DBMS_LOB.FILEOPEN(SRC_FILE, DBMS_LOB.FILE_READONLY);
    DBMS_LOB.OPEN(DST_FILE, DBMS_LOB.LOB_READWRITE);
    -- READ THE FILE
    DBMS_LOB.LOADFROMFILE( SRC_FILE, DST_FILE);
    -- UPDATE THE BLOB FIELD
    UPDATE PDM
    SET FNAME = SRC_FILE,
    IBLOB = DST_FILE;
    -- CLOSE FILE
    DBMS_LOB.CLOSE(DST_FILE);
    DBMS_LOB.FILECLOSE(SRC_FILE);
    COMMIT;
    END LOAD_FILE;
    ALTER TABLE IMAGE_TABLE
    DROP PRIMARY KEY CASCADE;
    DROP TABLE IMAGE_TABLE CASCADE CONSTRAINTS;
    CREATE TABLE IMAGE_TABLE (
    ID NUMBER PRIMARY KEY,
    IMAGE ORDSYS.ORDIMAGE);
    CREATE OR REPLACE DIRECTORY IMAGEDIR AS 'C:\cards\';
    GRANT READ ON DIRECTORY IMAGEDIR TO PUBLIC;
    GRANT READ ON DIRECTORY MY_FILES TO twilliam;
    GRANT READ ON DIRECTORY MY_FILES TO tmwillia;
    CREATE OR REPLACE PROCEDURE IMAGE_IMPORT(DEST_ID NUMBER,
    FILENAME VARCHAR2)
    IS
    IMG ORDSYS.ORDIMAGE;
    CTX RAW(64) := NULL;
    BEGIN
    DELETE FROM IMAGE_TABLE
    WHERE ID = DEST_ID;
    INSERT INTO IMAGE_TABLE (ID, IMAGE)
    VALUES (DEST_ID, ORDSYS.ORDIMAGE.INIT())
    RETURNING IMAGE INTO IMG;
    IMG.IMPORTFROM(CTX, 'FILE', 'IMAGEDIR', FILENAME);
    UPDATE IMAGE_TABLE SET IMAGE=IMG WHERE ID=DEST_ID;
    END
    CALL IMAGE_IMPORT(7142,'125-0502.pdf');
    CALL IMAGE_IMPORT(7143,'125-0503.pdf');
    SELECT ID,
    T.IMAGE.GETHEIGHT(),
    T.IMAGE.GETWIDTH()
    FROM IMAGE_TABLE T;
    SELECT ID,
    T.IMAGE.GETFILEFORMAT(),
    T.IMAGE.GETCOMPRESSIONFORMAT()
    FROM IMAGE_TABLE T;
    SELECT ID,
    T.IMAGE.GETCONTENTFORMAT(),
    T.IMAGE.GETCONTENTLENGTH()
    FROM IMAGE_TABLE T;

    In the second load_file procedure you should probably change the update command
    -- UPDATE THE BLOB FIELD
    UPDATE PDM
    SET FNAME = SRC_FILE,
    IBLOB = DST_FILE;into this
    -- UPDATE THE BLOB FIELD
    UPDATE PDM
    SET IBLOB = DST_FILE
    WHERE  FNAME = '262-2827.pdf';but I'm not sure how to explain the eof error message. Usually this happens when you forget an "END;" or "END LOOP;" command.
    Ok I rechecked and the declaration of the second procedure seems wrong
    -- CREATE THE PROCEDURE TO LOAD THE FILE
    CREATE OR REPLACE PROCEDURE LOAD_FILE AS (
    SRC_FILE BFILE := BFILENAME('PDF_DIR', '262-2827.pdf');
    DST_FILE BLOB;
    BEGINshould be rewritten as
    -- CREATE THE PROCEDURE TO LOAD THE FILE
    CREATE OR REPLACE PROCEDURE LOAD_FILE
      AS
      SRC_FILE BFILE := BFILENAME('PDF_DIR', '262-2827.pdf');
      DST_FILE BLOB;
    BEGIN
    ...I removed one parenthesis which was not closed.
    And for the image_import procedure there is a semikolon missing after the final END.
    END*;*
    Edited by: Sven W. on Nov 24, 2008 5:54 PM.
    Edited by: Sven W. on Nov 24, 2008 5:56 PM
    Edited by: Sven W. on Nov 24, 2008 5:59 PM

  • Issue with New OS 10.2.1.537 and "Delete On" with "Handheld Only"

    With the new setting "Delete On" set to "Handheld Only", the following scenarios will delete messages from both the Handheld, AND THE SERVER:
    1) Using "Delete Prior" to delete all messages prior to a selected date.
    2) Using "Select More" option to select multiple messages, and then choose "Delete".
    In both of these scenarios, the "Delete On" setting for the mailbox/account is not being honoured, and instead, is always deleting these messsage from both the Server and the handheld.
    Only when individual messages are chosen one at a time (opened or selected individually in the Hub), and deleted, is the "Delete On" setting honoured.
    This should not be the case.
    Clearly, a user's expectation would be that the setting of "Delete On" should be honoured for any type of delete that occurs within the mailbox/account.

    I didn't expect it as is, either, only confirming what you've stated.
    I don't know if it is working as designed, or a bug.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Message thread with mixed iMessage and SMS participants, but I can only send iMessages

    So I have a long running thread with a group of friends, some of us use iPhones and others do not. My phone used to understand this and would automatically just send SMS messages in the thread. However, now my phone will not do anything but send iMessages in the thread. It still automatically sends an SMS if I send a text to someone who doesn't use iMessage if its not in the thread. I have tried everything to get it to recognize that it needs to send SMS in this thread, but the only solution I have found so far is to completely turn off iMessage.
    I had an iPhone 5 and updated to a 6 and everything was still working fine. This issue started immediately after I set up text message forwarding to my macbook and iPad. I would prefer not to delete the thread itself and start a new one with the same people but it seems that may be the only option i have left.

    If you have Send as SMS enabled on your phone, your next step is to contact your cellular carrier to troubleshoot with them.

  • How do I delete cascade with a PL/SQL procedure?

    This script will create a PL/SQL procedure that deletes cascade. This is a post to contribute to the Oracle community. Take the code as is and test it before you use it in production. Make sure this is what you want.
    Procedure Delete Cascade (prc_delete_cascade)
    Description
    =============
    The principle is very simple. The procedure uses a table called TO_BE_DELETED to keep a list of records to be deleted. This
    table keeps the table name and the rowid of those records that need to be deleted. The procedure also uses a function called
    DELETE_BOTT_ROW which takes one record of the table and tries to delete it. If the deletion fails with a foreign key constraint
    violation, the function parses the SQL error message (SQLERRM) to get the name of the constraint. With the name of the constraint,
    the function finds the name of the child table, all the child records that have references to the parent table primary or unique key,
    and the parent key primary or unique key column name. Once the child records of the failed delete are identified, the function takes their table name and rowids
    and records them into the TO_BE_DELETED table by inserting records of their table name and their rowids. Al the records inserted also contain the level (which
    is 1 for the original records, 2 for child records, 3 for granchild records, etc.) and the sequence number of the order in wich they
    are recorded. This way, when the function picks up a record to be deleted, it takes the one with the highest level and the highest
    inserted sequence, or the "bottom" record. Once all the child records of the failed delete are appended to the TO_BE_DELETED table, it calls itself
    recursevely, and the function takes the record at the "bottom" of the table and tries to delete it. If it succeeds, it calls
    itself recursevely to delete the next record. If it fails, it goes and finds the child records as described before and once they are
    inserted into the TO_BE_DELETED table, it calls itself again recursevely to try to delete again the "bottom" record. All records
    that are successfully deleted are flagged as deleted usig the flag_del column so they are not pickt up again. Once all the (parent,
    child, grandchild, etc.) records are deleted, the procedure ends without commiting, giving the option to the user to commit or
    rollback deletions. The table TO_BE_DELETED is, at the end of the procedure, a list of all the records that were deleted, including their table names
    and the order in with they were deleted. The user then can review its content and decide to commit or rollback.
    Restrictions
    ============
    1. Single tables only. The procedure only takes one table name and a WHERE clause to identified the records to be deleted.
    2. Single columns only. Ther procedure only works with single-column primary, unique and foreign key constraints.
    3. Single schema only.
    4. Unpredictable results with circular references.
    drop table to_be_deleted purge;
    create table to_be_deleted
    (tname varchar2(30)       -- table name
    ,rid rowid                -- rowid
    ,lvl number               -- level: 1=parent, 2=child, 3=grandchild, etc.
    ,seq_ins number           -- sequence order of record inserted
    ,flg_del char             -- flag deleted: Y=record deleted
    ,seq_del number           -- global order of record deletion
    set serveroutput on size 1000000
    create or replace procedure prc_delete_cascade
    (p_tname varchar2  -- table name
    ,p_where varchar2  -- where clause identifying records to be cascade deleted
    is
      dummy         char;
      v_sqlcode     number;
      v_sqlerrm     varchar2(32767);
      v_param_val   integer := 0;
      v_sql         varchar2(4000);
      v_ret_cde     number;
      e_bad_params  exception;
      v_iter        number;
      v_plvl        number;
      v_seq_del     number;
      v_max_iter    number := 1000000000;
      function delete_bott_row
      return number
      is
        v_sql        varchar2(4000);
        v_ptname     varchar2(30);  -- parent table name
        v_ppkname    varchar2(30);  -- parent primary key constraint name
        v_ppkcname   varchar2(30);  -- parnet primary key column name
        v_prowid      rowid;
        v_crowid      rowid;
        v_ctname     varchar2(30);  -- child table name
        v_cfkname    varchar2(30);  -- child foreign key constraint name
        v_cfkcname   varchar2(30);  -- child foreign key column name
        v_ins        number;
        v_seq_ins    number;
        v_sqlerrm    varchar2(4000);
        v_sqlcode    number;
        e_const_viol exception;
        pragma exception_init(e_const_viol, -2292);
        e_max_iter_reached exception;
      begin
        v_iter := v_iter + 1;
        if v_iter >= v_max_iter then
          raise e_max_iter_reached;
        end if;
        dbms_output.put_line('- Iter '||to_char(v_iter));
        dbms_output.put_line('----------');
        dbms_output.put_line('- Starting function delete_bott_row');
        v_sql := 'select tname, rid, lvl, seq_ins from (select * from to_be_deleted where flg_del = ''N'' order by lvl desc, seq_ins desc) where rownum=1';
        --  dbms_output.put_line('- SQL: '||v_sql);
        execute immediate v_sql into v_ptname, v_prowid, v_plvl, v_seq_ins;
        dbms_output.put_line('- Selected row: table name: '||v_ptname||', level: '||v_plvl||', seq: '||v_seq_ins);
        v_sql := 'delete from '||v_ptname||' where rowid='''||v_prowid||'''';
        dbms_output.put_line('- SQL: '||v_sql);
        execute immediate v_sql;
        dbms_output.put_line('- Row deleted !!!');
        v_ret_cde := 1;
        v_seq_del := v_seq_del + 1;
        dbms_output.put_line('- Mark the row deleted');
        v_sql := 'update to_be_deleted set flg_del = ''Y'', seq_del = '||to_char(v_seq_del)||' where tname='''||v_ptname||''' and rid='''||v_prowid||'''';
        -- dbms_output.put_line('- SQL: '||v_sql);
        execute immediate v_sql;
        -- dbms_output.put_line('- Updated table to_be_deleted, row marked deleted');
        -- dbms_output.put_line('- End of iter '||to_char(v_iter));
        dbms_output.put_line('----------');
        -- call function delete_bott_row recursively
        v_ret_cde := delete_bott_row;
        return 0;
      exception
        when no_data_found then
          dbms_output.put_line('- Table to_be_deleted is empty, delete cascade has completed successfully.');
          v_ret_cde := 0;
          return 0;
        when e_const_viol then
          v_sqlcode := SQLCODE;
          v_sqlerrm := SQLERRM;
          v_ret_cde := v_sqlcode;
          dbms_output.put_line('>Constraint Violation. Record has children');
          -- dbms_output.put_line('Error code: '||to_char(v_sqlcode));
          v_cfkname := substr(v_sqlerrm,instr(v_sqlerrm,'.')+1,instr(v_sqlerrm,')') - instr(v_sqlerrm,'.')-1);
          dbms_output.put_line('>Child FK name: '||v_cfkname);
          select table_name, column_name
            into v_ctname, v_cfkcname
            from user_cons_columns
           where constraint_name=v_cfkname;
          dbms_output.put_line('>Child table name: '||v_ctname||'. FK column name: '|| v_cfkcname);
          select constraint_name, column_name
            into v_ppkname, v_ppkcname
            from user_cons_columns
           where constraint_name = (select r_constraint_name
                                      from user_constraints
                                      where constraint_name=v_cfkname);
          dbms_output.put_line('>Parent PK/UK name: '||v_ppkname||'. Parent PK/UK column: '||v_ppkcname);
          v_sql := 'insert into to_be_deleted(tname, rid, lvl, seq_ins, flg_del) '||
                   'select '''||v_ctname||''', rowid, '||to_char(v_plvl+1)||', rownum, ''N'' '||
                   'from '||v_ctname||' '||
                   'where '||v_cfkcname||' =any (select '||v_ppkcname||' from '||v_ptname||' where rowid =any (select rid from to_be_deleted where tname = '''||v_ptname||'''))';
          -- dbms_output.put_line('- SQL: '||v_sql);
          execute immediate v_sql;
          select count(*)
            into v_ins
            from to_be_deleted
           where lvl = v_plvl+1
             and tname = v_ctname
             and flg_del = 'N';
          dbms_output.put_line('>Found '||to_char(v_ins)||' child records which were added to table to_be_deleted');  
          v_ret_cde := delete_bott_row;
          return  v_ret_cde;
        when e_max_iter_reached then
          dbms_output.put_line('Maximum iterations reached.  Terminating procedure.');
          raise;
        when others then
          raise;
      end delete_bott_row;
    begin
      dbms_output.put_line('Beginning');
      dbms_output.put_line('================================');
      -- validate p_table
      begin
        select 'Y'
          into dummy
          from user_tables
         where table_name=upper(p_tname);
      exception
        when no_data_found then
        v_param_val := 1;
        dbms_output.put_line('Table '||p_tname||' does not exist.');
        raise e_bad_params;
      end;
      dbms_output.put_line('- Parameter p_tname validated');
      -- validate p_where
      begin
        execute immediate 'select ''Y'' from '||p_tname||' where '||p_where INTO dummy;
      exception
        when no_data_found then  -- where clause returns no records
          dbms_output.put_line('Record(s) not found.  Check your where clause parameter');
          v_param_val := 2;
          raise e_bad_params;
        when too_many_rows then  -- found multiple records means it is ok
          null; 
        when others then  --  any other records means where clause has something wrong.
          dbms_output.put_line('Where clause is malformed');     
          v_param_val := 2;
          raise e_bad_params;
      end;   
      dbms_output.put_line('- Parameter p_where validated');
      if v_param_val > 0 then raise e_bad_params; end if;
      v_iter := 0;
      v_plvl := 1;
      v_seq_del := 0;
      v_sql := 'insert into to_be_deleted(tname, rid, lvl, seq_ins, flg_del) select '''||upper(p_tname)||''', rowid, '||to_char(v_plvl)||', rownum, ''N'' from '||p_tname||' where '||p_where;
      dbms_output.put_line('- Inserting initial record');
      dbms_output.put_line('- SQL: '||v_sql);
      execute immediate v_sql;
      dbms_output.put_line('- Record(s) inserted');
      dbms_output.put_line('- Calling function delete_bott_row to delete last row of table to_be_deleted');              
      dbms_output.put_line('-----------------------------------');              
      v_ret_cde :=  delete_bott_row;
      -- dbms_output.put_line('- Back from function delete_bott_row');              
      -- dbms_output.put_line('Return code: '||to_char(v_ret_cde));              
      dbms_output.put_line('- End of procedure');              
    exception
      when e_bad_params then
        dbms_output.put_line('Bad parameters, exiting.');
    end;
    show errors
    spool prc_delete_cascade.log
    --  Call to the procedure
    exec prc_delete_cascade('xent','xent_id between 1669 and 1670')
    select tname "Table Name", count(*) "Rows deleted"
      from to_be_deleted
    group by tname;
    spool off
    set lines 120
    select *
      from to_be_deleted
    order by seq_del;
    prompt  Now commit or rollaback deletions.
    -- commit;
    -- rollback;Edited by: Rodolfo4 on Mar 23, 2011 10:45 AM

    Interesting.
    I see a few areas where this could be useful. Elimiating specific test records from a Test DB for example.
    Some comments:
    <li>Since this is a recursive logic you must add a stop criteria. In this case I would add a max iteration variable. If that one is reached, raise an error message and let the procedure stop with that error.</li>
    <li>The when others exception at the end should be removed completely</li>
    <li>The when others exception in the middle should be replaced by a specific exception that handles the -2292 error</li>
    <li>A list of tables where no record should be deleted could be usefull. If the logic would encounter such a table, it should also stop. This would be to prevent that data from some system critical tables could be deleted per accident.</li>
    <li>The reference from the FK constraint to the PK constraint should include the table name and if possible the owner (as long as you use user_* views the owner is always the same. But we could extend this to the ALL_* views). I never met a system where different tables have the identical FK constraint names, however just make this fool proof.</li>

  • I used the wrong ID for iCloud on my iphone 5. It is linked to an email that no longer exists. Do I have to delete my iCloud completely and set it up all over again?

    I used the wrong ID for iCloud on my iphone 5. It is linked to an email that no longer exists. Do I have to delete my iCloud completely and set it up all over again?

    You can change the linked email/sign in email for your iCloud and Apple ID accounts from 1 site,
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    Go to Manage your Apple ID
    Sign in with your current creditals
    On the left, click Name, ID and Email Addresses
    Under Apple ID and Primary Email Address, click Edit
    Type in your new Email.
    Go to Apple ID, click Edit
    Type in your new Email

  • Mail on my iPhone and iPad no longer works on wifi. If I turn wifi off I can connect over the cellular network. I have tried deleting my AOL account and setting it up again as a new account but I still have the same problem.

    Mail on my iPad and iPhone has stopped connecting using wifi. If I turn wifi off I can connect using cellular. I have tried deleting my AOL account and setting it up again as a new account but that hasn't helped.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
    http://support.apple.com/kb/TS1944
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say “Cannot Connect to Server”?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    Gmail Account Will Not Connect to Gmail Server
    http://support.apple.com/kb/ts3058
    How to Delete Email on the iPad
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
    How to Mass Delete Emails from iPhone and iPad Inbox (with video)
    http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
    How to add, send and open iPad email attachments
    http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    Importing a Contact List CSV to the iPad
    http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
    iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iCloud: Create a group and add contacts to it
    http://support.apple.com/kb/PH2667
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
    How to delete an email account on your iPad
    http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
     Cheers, Tom 

  • Adf Table with selection as set to NONE

    Hi,
    I having a scenario as explained below:
    I am populating records in to the adf Table
    After that I am using checkbox for selecting multiple records in the table and delete them.
    So I set selection property to None for the table. Because I want user to edit only that record which is checked.
    My multiple delete is working fine.
    Now if i selected one checkbox and and click on edit(which I have placed in the panal collection toolbar) it should show me the record in the which I have selected by check box. But it is showing me the first row.
    Can anybody help me to set the current row of the adf table manually which is having selection property as none. so that I can populate in popup.
    If some other way is available please explain.
    I am using jdeveloper 11.1.2.1
    Thanks,
    Sandeep.

    I don't see why you can't set selection property to "single"? (and don't forget to restore table SelectionListener property - if deleted)
    This will set current row when you click on it.
    If you programmatically iterate through RowSet to find rows with selected checkbox, this will work regardless of value in "selection" property.
    Dario
    Edited by: kdario on Nov 7, 2012 5:20 AM
    Edited by: kdario on Nov 7, 2012 5:22 AM

Maybe you are looking for