Corelating messages using the Dynamic Values

Hi all,
I want to collect message using BPM.I have sucessfully executed the same using corelation from one of the fields.The ID field was used for corelation
I was able to sucessfully execute the senario the messages with same ID were going to same process ID and getting collected as well
Now i wanted to have some dynamicconfiguration parameters for eg i thought i can use the filename.That is collate the messages using the filename.
I changed the corleation and tried but for each messages even with the same file name its creating a different process ID and thus my messages are not collected at all.
To tel you more about the senario i created its a file to file with BPM collecting the messages. i send the first file and then the second file also with the same file name.
I have configured the AdapterSpecific Attributes and able to view the filenames in the XML Messages header
Can anyone put some light as too why there are different Process IDs being created.I heard in some of the forums that its an error in some of the SPs
I am on XI 7.0 SP11 and think it should not be a problem.
Thanks in Advance
Rgds
Aditya

thnks for ure replies
But all of the above steps are checked
It seems that i have given the right co-relation as well but still dnt knw y i'm not able to collect the messages
The loop is defined to complete after a fixed count and the container variable increments by 1 after each loop
The senario works perfectly if i use any field corelation to collect the messages but fails when i use a dynamic value like filename. And yes i have double checked the filename they are same
Rgds
Aditya

Similar Messages

How to read the Key value from the Message using the text value.. Urgent

I need to read the Key valuefrom the message pool using the text value for the Key.. Is it possible.. Please help me with sample code..
Thanks and Regards
Avijit

Avijit,
I got your requirement. I really dont know the scenario your working on but its possible to do it. There is no direct way to do so, but complexity is in getting to know the Keys dynamically from interface.
Here you go..
     try
          Class msgClass      = IMessageTestWDApps.class;
//Replace IMessageTestWDApps with IMessage<Your WD Component name>
          Field keys[]      = msgClass.getFields();
          IWDTextAccessor textAccessor = wdComponentAPI.getTextAccessor();
          if(keys != null)
               String key = "";
               for(int index=0;index<keys.length;index++)
                    key = keys[index].getName();
                    wdComponentAPI.getMessageManager().reportSuccess("Key= "+key);
                    if(textAccessor.getText(key).equals("My message text"))
                         //your logic.
     catch(Exception cnfe)
          wdComponentAPI.getMessageManager().reportException("Exe "+cnfe.getMessage(),false);
Regards
Abhilash
Message was edited by:
        Abhilash Gampa

[svn] 1751: Bug: BLZ-174 - MessageClient.testMessage() is incorrectly doing a string compare for the subtopic header of an inbound message against the subtopic value (which may contain wildcards) that the Consumer is using.

Revision: 1751
Author: [email protected]
Date: 2008-05-15 14:21:43 -0700 (Thu, 15 May 2008)
Log Message:
Bug: BLZ-174 - MessageClient.testMessage() is incorrectly doing a string compare for the subtopic header of an inbound message against the subtopic value (which may contain wildcards) that the Consumer is using.
QA: No - customer verified the fix.
Doc: No
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-174
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/MessageClient.java
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/MessageService.java

If you create a metadatatype with a single metdata block, and you reference that in your vm/cm cell attribute using a *one* based index, Excel seems to see the link and it honors it when saving the spreadsheet.
So, I ended up with something like:
<c ... cm="1"/> (I'm dealing with cell metadata, but the concept is equivalente to value metadata)
<metadataTypes count="1">
  <metadataType name="MyMetaType" .../>
</metadataTypes>
<futureMetadata count="1" name="MyMetaType">
  <bk>
    <extLst><ext
uri="http://example" xmlns:x="http://example"><x:val>87</x:val></ext></extLst>
  </bk>
</futureMetadata>
<cellMetadata count="1">
  <bk><rc
t="1" v="0"/></bk> 
</cellMetadata>
Hope this helps.

How to use the Dynamic Configuration Bean

Hi experts,
im currently doing a file to mail scenario.
i want the name of the input file as the subject of the mail.
i want to establish this using the Dynamic Configuration bean
my first question is:
key.1 <b>read</b> http://sap.com/xi/XI/System/Mail THeaderSUBJECT
value.1 message.messageID
this reads the value of the message ID into the attribute THeaderSUBJECT
but what does this do?
key.1 <b>write</b> http://sap.com/xi/XI/System/Mail THeaderSUBJECT
value.1 message.messageID
when i use this it has no effect atall.
my second question.
I have my input filename in the FileName attribute in Dynamic configuration how can i read it into THeaderSUBJECT attribute.
Appreciate any suggestions.

Hi Satish,
Yep i know its possible via an udf in Message mapping but i dont have an MM in my scenario. Since im not parsing thru the input data since its an excel file, so im transferring the file using the following method
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
and in this method if i include an MM it will give me a mapping exception.
So i have to use this bean somehow and try to accomplish what we do in the udf.

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

How do I use the Index Values property node with a multidimensional array.

I am using a 2D array to store operator inputs on my front panel. I only want to display one element to the operator at a time. I am trying to use the Index Values property node to change the displayed element. However, I can only get the Rows index to work. How do I direct the Columns index as well? The help says to use one per dimension. I need clarification on what this is talking about. I've tried adding a second element to the property node, 2 seperate property nodes, and diferent wiring techniques. (series, parallel)

If you only wire up one of the inputs (col or row) what you get out is a 1D array of either the column or row. If you wire controls to both, then you will get one element out of the array. Getting a single element in a 2D array requires you to specify both a row and column.
Message Edited by Dennis Knutson on 02-08-2007 08:34 AM
Attachments:
Index 2D Array.PNG ‏2 KB

Hard code accounts using the dynamic report templates?

Anyone ever been able to hard code accounts using the dynamic report templates?
How about getting the Property name/value fields to work?

Hi,
No, this is not possible.
In Dynamic Report templates (which are not based on EVDRE function in version 7 and below), the only thing you can do is to not use any expansion at all and to list your specific accounts on the layout itself. Or to expand your accounts based on a dimension property.
In version 7.5, all Dynamic Templates for Report and Input Schedules will use EVDRE function.
Hope this helps.
Kind Regards,
Patrick

Why can I send email from my iPad, but my iMac which is connected to the same modem keeps telling me that it can't send the message using the same server?

I have an iPad 2, connecting via Wifi to an Actiontec Q1000 modem. The iMac (3.06 GHz Intel Core 2 Duo, 4 GB 1067 MHz RAM, running OS 10.8.2) is also hard wired to the same modem. Internet access is via CenturyLink. Main email is from Shaw cable in Calgary (Phoenix is a vacation property), not through CenturyLink.
Can receive email on the iMac, but every time I try to send, I get a pop up saying "Cannot send message using the server .......". Further prompts me to verify the address in the email, and SMTP settings in Mail preferences, or to select a different outgoing mail server. I've tried using a number of servers, always the same result.
Using same settings in both devices.

Mail is not my forte, but what I noticed was that you have Centurylink and presumably have your Mail set up with their settings? But then you mention Shaw/vacation property/etc - you can send out email only through the server that you have set up as an account using the ISP you are using. If you switch places, do you have separate accounts set up with both Centurylink and Shaw so you can switch and use whichever one you're at? A Phoenix ISP won't work with a Mail POP account unless you're in your home - Phoenix - area.
Do you have a data plan with your iPad? That would explain why that works - it'll function sort of like a cellphone - works anywhere where there are signals.

"cannot send email message using the server icloud" on 10.6.8

I use mail from my desktop, not from iCloud on the Internet. I have a MacBook Pro with 10.6.8 Snow Leopard. My mail was working fine until yesterday.
It says "Cannot send message using the server iCloud. connections to the server smtp.me.com on the default ports timed out. Select a different outgoing mail server from the list below.
The list has:
ICloud offline
and Icloud
Neither of them work.
What has Apple changed regarding this in September?
(I know others have posted similar message, but they were on 10.7)

Same problem here.
Recently an @icloud.com version (alias) of my existing @me.com email address appeared on my account. I can still send messages form the OSX build in Mail client as long as I am using the @me.com version of my email, but I do get this message when I try to use the new @icloud.com account.
My account with iCloud states that both @me.com and @icloud.com versions of my email are active.
Would be nice to know if this is a temporary problem of if this is a permanent one.
The settings on the outgoing mail server are default as retrieved from apple when I configured the @me.com email for the first time. I went through the troubleshooting suggestions as provided on Apple website, double checking all the settings, no joy. At the very list I can still use the old @me.com alias with no problem (for now)
MacBook Pro / Mountain Lion 10.8.2

"Cannot send message using the server....."

Hi all,
Considering the nature of the problem I am about to relate I would have to say at the outset that I would be very very surprised if other people have not come across this problem, so here goes...
We have around 60 users of Apple Mail from both 10.4 and 10.5, so varying degrees of versions of Apple Mail however most if not all are updated to 10.4.11 and 10.5.2.
We have been plagued with people being frustrated about emails bouncing back with an immediate error which is basically the following...
"Cannot send message using the server smtp.xxx.com:user
Sending the message content to the server failed.
Select a different outgoing mail server from the list below etc etc"
I am sure a lot of you have seen this error.
However, it is totally random but I am at the end of my tether with it. It generally revolves around emails with attachments and can be totally random. I was trying to send a screenshot today, very small screenshot, using the Apple-Shift-4 technique, sent the .png file, then saved it out as a .jpg, nothing. Tiny file, around 5k. Got the error above, took it out, sent no problem. Other similar files on the desktop refused to send but a .pdf did. I then thought it might be our server, so sent teh same attachments using my .mac account. Same result and failed to send. Reports from other users in our group show that they too get random results, maybe moving the attachment in the email makes it go, sometimes putting it before your signature, sometimes putting your signature copied and pasted in so many times makes it work, all sorts of methods but all resulting in the same conclusion, Apple Mail can be very unreliable.
We have even migrated some users to Entourage and the problem disappears. Even to Thunderbird, but those users miss the search capability as it is quicker and more reliable. So they want to go back.
Considering I have been struggling with this issue back in the day when we were on the Apple Mail related version in 10.4 I was hoping that the version released in 10.5 would remedy the problems. Sometimes I feel it has just got worse.
Is anyone else experiencing this sort of difficulty in Apple Mail, I really feel isolated and at a loss with how to remedy this for so many users.
If anyone can share their experiences and how they have got around similar issues in Mail I am all ears and open to any suggestions.
Thanks everyone for taking the time to read through this. There is more but the experiences are so random it is not worth trying to put it all down.
Thanks again.
Gerry McCoy

I went in to Connection Doctor and. oddly enough, for this Mac account it said I was on Port 25. Si I changed it to Port 587 and saved the changes.
Still, I have the same problem with the same error messages.
I go back to the mail preferences > Accounts > Advanced and it shows Port 143 still there grayed out.
What about SSL - it's not checked.
Odd that this problem only seems to be from one .mac account emailing to another .mac account. Could the server be down?

Cannot send message using the server (null)

i use mail 2.1.
i have a .mac account and have three other email accounts attached to my mail account.
lately, i cannot send any email.
the switchiing ports fix hasn't helped either.
this is the error message:
CANNOT SEND MESSAGE USING THE SERVER (null)
The server response was: 5.1.0 <email [email protected]>...
From address does not match authentication.
Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
Message from: email <[email protected]>
Send message using: [there is a combo box here with all the four accounts servers listed]
no matter which one i pick it doesn't work and no email is sent.
anyone have this error before? or now how to fix it?
i'd be appreciative.
thanks
1.67 GHz Power PC PowerBook G4 Mac OS X (10.4.6) Sony HDR HC3 HD HandyCam MiniDV

I was having a similar problem (don't feel like typing all the details)
I was about to to delete my com.apple.mail.plist, when finally it hit me.
I ran ethereal (again, I'm sorry, but learning how to use ethereal is a topic unto itself). Following the TCP stream (ie. looking at the smtp messages being sent back and forth) I came across two problems. For some reason my port number was set to 567 or something like that, when it's supposed to be 25, as I had originally set it to.
Once I corrected the port number I started receiving an error message from the smtp server. It said the return email address could not be authenticated. (using xyz.com as an example) The correct return email address was supposed to be [email protected], but for some reason it was changed to john@xyz in the account settings.
Anyway, to get to the point, another thing to check is that your return address has been set correctly, and if all else fails, make sure you have X11 installed and use fink to install and run ethereal. This will let you know if you are actually connecting to the server, and will show you any error messages.
PS. I think this problem started occurring with the last update made to mail. I believe it somehow corrupted my settings. This would explain how my port number could have been changed to the default port number of .mac mail.

OSX Mail - Cannot send message using the server ....

Hi there,
Mac Pro with OSX 10.6.
*Can receive mail, but can no longer send email* using the program Mail.
Been getting the popup "Cannot send message using the server [shawmail.vc.shawcable.net] for the past 3 days. I hadn't changed anything about my computer, and have had the Mac for 2+ years. So this just started doing it on it's own.
I had a technical support guy from my service provider even interface with my computer, where he could see my desktop right over the internet, and he couldn't get it fixed either.
I googled this problem, and found solutions like:
1. Uncheck "Use SSL" (Done that, and it was never checked "on" to begin with)
2. Make sure Authentication is set to none, with no password (done that, and it wasn't set with a password to begin with)
3. Delete [user]/Library/Preferences/com.apple.mail.plist (done that, didn't do anything)
4. We even totally deleted my account, and started a new fresh one. Didn't work
The tech support guy did show me a way to email online, using the same email account. That worked, but it's a hassle to go onto a web-based email program -- it's not my preference. So, with great certainty, it's not my service provider, because I was able to send emails on this web-based email program using my email account.
So there, I'm stumped.
Hopefully someone can help. What's bizarre is that googling this problem, I have found many other people that say it happens arbitrarily, out of nowhere.

I can't believe how ridiculous this issue is. i have been searching for days for a solution to this. i have tried EVERY recommendation on these forums and nothing works. It appears that this issue dates back to TIGER. I had this problem back in January and just bagged figuring it had something to do with iweb. I bought a new html program and was able to send out my newsletter last month no problem. Suddenly, one month later- here i am again, unable to send out my newsletter with no help from Apple or verizon, or these forims, or anyone else. To think that a company that I have stood behind and loved so much can't be be bothered fixing such a simple issue that has been going on now through 5 OS's (I am using Lion but I had the issue using leopard as well) is a disgrace.

Getter/setter methods -- how do I use the return values

I'm just learning Java, and I haven't been to this site since the end of July, I think. I have a question regarding getter and setter methods. I switched to the book Head First Java after a poster here recommended it. I'm only about a hundred pages into the book, so the code I'm submitting here reflects that. It's the beginnings of a program I'd eventually like to complete that will take the entered information of my CD's and alphabetize them according to whatever criteria I (or any user for that matter) choose. I realize that this is just the very beginning, and I don't expect to have the complete program completed any time soon -- it's my long term goal, but I thought I could take what I'm learning in the book and put it to practical use as I go along (or at lest try to).
Yes I could have this already done it Excel, but where's the fun and challenge in that? :) Here's the code:
// This program allows the user to enter CD information - Artist name, album title, and year of release -- and then organizes it according the the user's choice according to the user's criteria -- either by artist name, then title, then year of release, or by any other order according to the user's choice.
//First, the class CDList is created, along with the necessary variables.
class CDList{
     private String artistName;//only one string for the artist name -- including spaces.
     private String albumTitle;//only one string the title name -- including spaces.
     private int yearOfRelease;
     private String recordLabel;
     public void setArtistName(String artist){
     artistName = artist;
     public void setAlbumTitle(String album){
     albumTitle = album;
     public void setYearOfRelease(int yor){
     yearOfRelease = yor;
     public void setLabel(String label){
     recordLabel = label;
     public String getArtistName(){
     return artistName;
     public String getAlbumTitle(){
     return albumTitle;
     public int getYearOfRelease(){
     return yearOfRelease;
    public String getLabel(){
    return recordLabel;
void printout () {
       System.out.println ("Artist Name: " + getArtistName());
       System.out.println ("Album Title: " + getAlbumTitle());
       System.out.println ("Year of Release: " + getYearOfRelease());
       System.out.println ("Record Label: " + getLabel());
       System.out.println ();
import static java.lang.System.out;
import java.util.Scanner;
class CDListTestDrive {
     public static void main( String[] args ) {
          Scanner s=new Scanner(System.in);
          CDList[] Record = new CDList[4];
          int x=0;
          while (x<4) {
          Record[x]=new CDList();
          out.println ("Artist Name: ");
          String artist = s.nextLine();
          Record[x].setArtistName(artist);
          out.println ("Album Title: ");
          String album = s.nextLine();
          Record[x].setAlbumTitle(album);
          out.println ("Year of Release: ");
          int yor= s.nextInt();
                s.nextLine();
          Record[x].setYearOfRelease(yor);
          out.println ("Record Label: ");
          String label = s.nextLine();
          Record[x].setLabel(label);
          System.out.println();
          x=x+1;//moves to next CDList object;
          x=0;
          while (x<4) {
          Record[x].getArtistName();
          Record[x].getAlbumTitle();
          Record[x].getYearOfRelease();
          Record[x].getLabel();
          Record[x].printout();
          x=x+1;
               out.println("Enter a Record Number: ");
               x=s.nextInt();
               x=x-1;
               Record[x].getArtistName();
            Record[x].getAlbumTitle();
            Record[x].getYearOfRelease();
            Record[x].getLabel();
            Record[x].printout();
     }//end main
}//end class          First, I'd like to ask anyone out there to see if I could have written this any more efficiently, with the understanding that I'm only one hundred pages into the book, and I've only gotten as far as getter and setter methods, instance variables, objects and methods. The scanner feature I got from another book, but I abandoned it in favor of HFJ.
Secondly --
I'm confused about getter and setter methods -- I'd like someone to explain to me what they are used for exactly and the difference between the two. I have a general idea, that getters get a result from the method and setters set or maybe assign a value to variable. I submitted this code on another site, and one of the responders told me I wasn't using the returned values from the getter methods (he also told me about using a constructor method, but I haven't got that far in the book yet.). The program compiles and runs fine, but I can't seem to figure out how I'm not using the returned values from the getter methods. Please help and if you can explain in 'beginners terms,' with any code examples you think are appropriate. It will be greatly appreciated.
By the way, I'm not a professional programmer -- I'm learning Java because of the intellectual exercise and the fun of it. So please keep that in mind as well.
Edited by: Straitsfan on Sep 29, 2009 2:03 PM

Straitsfan wrote:
First, I'd like to ask anyone out there to see if I could have written this any more efficiently, with the understanding that I'm only one hundred pages into the book, and I've only gotten as far as getter and setter methods, instance variables, objects and methods. The scanner feature I got from another book, but I abandoned it in favor of HFJ.Yes, there is tons you could have done more efficiently. But this is something every new programmer goes through, and I will not spoil the fun. You see, in 3 to 6 months when you have learned much more Java, assuming you stick with it, you will look back at this and be like "what the hell was I thinking" and then realize just haw far you have come. So enjoy that moment and don't spoil it now by asking for what could have been better/ more efficient. If it works it works, just be happy it works.
Straitsfan wrote:
Secondly --
I'm confused about getter and setter methods -- I'd like someone to explain to me what they are used for exactly and the difference between the two. I have a general idea, that getters get a result from the method and setters set or maybe assign a value to variable. I submitted this code on another site, and one of the responders told me I wasn't using the returned values from the getter methods (he also told me about using a constructor method, but I haven't got that far in the book yet.). The program compiles and runs fine, but I can't seem to figure out how I'm not using the returned values from the getter methods. Please help and if you can explain in 'beginners terms,' with any code examples you think are appropriate. It will be greatly appreciated.
By the way, I'm not a professional programmer -- I'm learning Java because of the intellectual exercise and the fun of it. So please keep that in mind as well.First, if you posted this somewhere else you should link to that post, it is good you at least said you did, but doubleposting is considered very rude because what inevitably happens in many cases is the responses are weighed against each other. So you are basically setting anyone up who responds to the post for a trap that could make them look bad when you double post.
You are setting you getters and setters up right as far as I can tell. Which tells me that I think you grasp that a getter lets another class get the variables data, and a setter lets another class set the data. One thing, be sure to use the full variable name so you should have setRecordLabel() and getRecodLabel() as opposed to setLabel() and getLabel(). Think about what happens if you go back and add a label field to the CDList class, bad things the way you have it currently. Sometimes shortcuts are not your friend.
And yes, you are using the getters all wrong since you are not saving off what they return, frankly I am suprised it compiles. It works because you don't really need to use the getters where you have them since the CDList Record (should be lowercase R by the way) object already knows the data and uses it in the printout() method. Basically what you are doing in lines like:
Record[x].getArtistName();is asking for the ArtistName in Record[x] and then getting the name and just dropping it on the floor. You need to store it in something if you want to keep it, like:
String artistName = Record[x].getArtistName();See how that works?
Hope this helped, keep up the good learning and good luck.
JSG

How to use the Dynamic Expression in BRFplus

Hi Experts
               I am new to BRFplus. Can you give any document on BRFplus how to use the Dynamic Expression.
Thankyou
Venkat

OK I tried it and worked but for one condition:
WHERE DECODE (E.qualification_sid, 1104,
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.spe_per)+1),
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.mili_yea_per)+1))
     BETWEEN TO_DATE('01-07-2011', 'DD-MM-RR') AND TO_DATE('31-07-2011', 'DD-MM-RR')
But how to put two conditions for the same Expression:
WHERE DECODE ((E.qualification_sid, 1104) AND (E.RANK_SID, 8),
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.spe_per)+1),
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.mili_yea_per)+1))
     BETWEEN TO_DATE('01-07-2011', 'DD-MM-RR') AND TO_DATE('31-07-2011', 'DD-MM-RR')
The previous code gives me this error: missing right parenthesis

How to use the prompted value in the filter expression

Hi
Is it possible to use the prompted value in the filter expression?
My requirement is that user will be prompted for a date field and I need to filter the records such that the records are displayed for the last 5 weeks from the date entered by the user.
If somehow I know how to use the prompted value in the filter expression then this requirement is easy to be done. If this is possible, please guide me?
If there are other ways to acheive the desired results then please suggest.
Thanks
-Jaz

Edit: example added
SQL> create table tb_test
2 ( id number(5)
3 , tot number(5)
4 , mon_tot number generated always as (tot*15) virtual
5 );
Table created.
SQL> insert into tb_test (id, tot) values (1, 5);
1 row created.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1          5         75
1 row selected.
SQL> update tb_test
2 set    tot = 15
3 where id = 1;
1 row updated.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1         15        225
1 row selected.

Corelating messages using the Dynamic Values

Similar Messages

Maybe you are looking for