Cost center integration with HR - logical system for CRT inconsistent

Hi there,
we are distributing Cost centers from our SAP ERP system to another SAP HR system via ALE [COSMAS01 basic type].
The cost center created in target system contains information about source system logical system name - table CSKS, field LOGSYSTEM.
This is causing problems in Travel Managment in SAP HR system, where we get the error: Logical system for CTR inconsistent.
Cost centers created/changed in HR system does not contain any value in CSKS-LOGSYSTEM field and work fine.
Any ideas how to solve this issue?
For now to fix the issue, user needs to do a phony change in SAP HR system to get rid of original LOGSYSTEM value.
I am thinking about removing field E1CSKSM-LOGSYSTEM from COSMAS IDoc but I gues there must be simpler soloution.
Thanks for your advices,
Igor

Igor :
I think this has something to do with matching logical system with controlling area in TKA01. Another option for cc's logical system to have no values when outbound ALE is to config V_TKA01_ALE (so it will be transported to the system that has cc ALE to other systems) to have field 'ALE Distribution Method' blank (No distribution to other system).
This way, when SAP is creating outbound idoc for COSMAS, field CSKS-logicalsystem will not be populated (logic is in SAP 'MASTERIDOC_CREATE_COSMAS' , around line 86).
Rgds.

Similar Messages

  • Best practices for apps integration with third party systems ?

    Hi all
    I would like to know if there is any document from oracle or from your own regarding best practices for apps integration with third party systems.
    For example, in particular, let's say we need customization in a given module(ex:payables) need to provide data to a third party system, consider following:
    outbound interface:
    1)should third party system should be given with direct access to oracle database to access a particular payments data information table/view to look for data ?
    2) should oracle create a file to third party system, so that it can read and do what it need to do?
    inbound:
    1) should third party should directly login and insert data into tables which holds response data?
    2) again, should third party create file and oralce apps will pick up for further processing?
    again, there could be lot of company specific scenarios like it has to be real time or not... etc...
    How does companies make sure third party systems are not directly dipping into other systems (oracle apps/others), so that it will follow certain integration best practices.
    how does enterprise architectute will play a role in this? can we apply SOA standards? should use request/reply using Tibco etc?
    Many oracle apps implementations customizations are more or less directly interacting with third party systems by including code to login into respective third party systems and vice versa.
    Let me your know if you have done differently and that would help oracle apps community.
    thanks
    rrb.

    you want to send idoc to third party system (NONSAP).
    what kind of system is it? can it handle http requests
    or
    can it handle webservice?
    which version of R/3 you are using?
    what is the mechanism the receiving system has, to receive data?
    Regards
    Raja

  • Default logical system for usersettings

    Dear Experts,
    I hope you can help me with the following question:
    We use SRM 7.0 with multiple backend systems. If the endusers want to default their cost centers in SRM via the portal themselves by clicking on "Usersettings" and selecting the attribute "cost center", the first thing that needs to be entered is the Logical system.
    Is it possible to default the logical system in the PPOMA so that the end user does not have to select it?
    Thanks a lot in advance!
    T.

    Hi Toppika,
    Could you please try to define a logical system for the attribute 'ACS'  and tick it as default at the user level if possible or at the org unit level?
    In such cases, the system should default the logical system.
    Thanks and regards,
    Ranjan

  • Internal order - Error - Different logical system for order

    Hello all,
    I try to send IDoc (INTERNAL_ORDER) from system A to system B.
    I have done:
    - BD64 / WE20 / WE21
    But after having customizing I have got following error:
    Different logical system for order xxxxxx
    Message no. 2075ALE001
    Diagnosis
    Internal order xxxxxxx already exists in system B. Its master system B is different from the master system A of the new internal order to be distributed with the same order number xxxxxxx.
    System Response
    Internal order xxxxxxx with master system A cannot be distributed in system B.
    Procedure
    Check customizing for ALE for internal orders.
    How to solve this?
    My aim is to maintain internal order master data in test system.
    Thanks for your help.
    David

    I have found something.
    If I change in table AUFK, logical from empty to A (master) and I run IDOC then IDOC has been correctly integrated.
    Then: how to define "master"?

  • Logical system for CTR 5000/5300F04000 inconsistent

    How can I solve the below error:
    Logical system for CTR 5000/5300F04000 inconsistent
    Message no. KC038
    Diagnosis
    Objekt CTR 5000/5300F04000 is assigned to logical system GC7CLNT520 but should, according to the distribution scenario you have configured, be assigned to logical system GC7CLNT510.
    System Response
    No further processing possible.
    Procedure
    Correct this by either assigning CTR 5000/5300F04000 to the right logical system or changing the distribution scenario.

    What is the version you are using?
    You can also please check the following note:
    Note 210842 - Distributn cost center master data w/out active ALE

  • Logical System for Transaction Launcher??

    Dear all,
    Should we define logical system for Transaction Launcher to call transactions from back end ECC system. If yes, why we do this and where we maintain the logical systems?
    Can we use existing ECC logical system, whcih mapped with SAP CRM system?
    Where can we define the logical system for Transaction Launcher?
    Please clarify my doubts to complete this process successfully, your suggestions will be highly appreciated.
    Thank you
    Raghu ram.

    Hi Raghu Ram
    In order to call an transaction from ECC, you should choose the logical system of the ECC System itself. You will get the information regarding the logical name assigned to your ECC System using the tcode SM59. The logical system must have been defined for the ECC System before you integrated CRM to backend ECC.
    Check the tcode SM59 and you will find logical name of your ECC System there.
    And yes, you are suppose to use the existing ECC logical system, which is mapped with SAP CRM system.
    Hope this helps
    Regards
    Rekha Dadwal

  • Integration server as logical system in IDoc to file scenario

    Hi,
    Will we configure integration server as logical system in IDoc to file scenario or the RFC destination related to the port will be suffice?
    For which logical system will the outbound partner profile configured?
    Regards,
    Gajendra.

    Hello,
    I feel that the RFC destination linked to the port is the key here.
    Because the scenario (IDoc to File) works in both the cases:
    Case 1: Used the logical system as Integration server
    Case 2: Used the logical system related to the file (third party) in the SLD.
    In both the above cases the RFC destination points to the integration server.
    Is this the case that in the XI scenarios (where IDoc are sent) the logical system name in the partner profile is just dummy and has not much significance??
    It is the port that matters and once the Idoc reaches XI the routing takes place based on the configuration in ID.
    Thanks.
    Regards,
    Gajendra.

  • ALE logical systems for business service or process

    Hi,
    I am trying to send an IDOC into my R/3 system. It is the same IDOC type that I have sucessfully sent out to parties. All the config is in place for communicating with the system, because I have sent others IDOCs in the past. However, they always were sent from another R/3 business system. They processed sucessfully.
    I am now trying to sending IDOC's from a BPM,as well as, from a business service. They are under the "With Party" section of the directory. These obviously do not have logical systems, so when I try to send the IDOC I get
    "Unable to convert the sender service Purchase_Orders to an ALE logical system", where purchase_Orders being the name of the business serice.
    How can I handle this problem?
    Should I hard code values somewhere?
    Which ones?
    I have read the other posts for the error above, but my situation seems to be different.
    Help!
    Chris

    Hi,
    To solve your problem, here my solution:
    1/ In your Business Process of your ID (configurator), go to menu "Service > Adapter-specific identifier" and in the part "IDoc Adapter", write your Logical System.
    2/ Create this Logical System on your target system (R/3).
    WARNING: XI allows you to used a Logical System for only one service (Business Process). Thus, if you are several interfaces, you must used different Logical Systems.
    Mickael.

  • Hide/Suppress Cost center field in MIGO and MB1A for movement types 551&552

    Hi All,
    Can anybody tell me how to suppress or hide the cost center field in MIGO or MB1A for movement types 551 and 552?
    I did below settings and it worked fine for only MB1A and for MIGO still it is showing cost center field.
    IMG > Materials Management > Inventory Management and Physical Inventory >Goods Issue/Transfer posting > Define screen layout > select movement type to change the option.
    Also I did gothrough the settings for Enjoy transaction (MIGO) there we have only option to make fields either  "Required entry" or "Optional entry" and we don't have an option to hide/suppress.
    Please advise or help me .
    Thanks in advance!
    Regards,
    Praveen

    Hi
    The cost center field is a required field in mvt type 551 as you are scrapping materials, some cost center will need to take the cost of this operation.
    Anyway, you first need to make the field as optional for example, before you move.
    One option is that you create a screen variant in Tcode SHD0 for MB1A, where 551 is setup as constant (with content) , and mark Cost center as invisible and assign this screen variant to a transaction in SE93.
    regards
    Sidi

  • Logical System for RFC-Business system?

    Hi,
    I want use RFC adapter for my scenario like File to RFC.
    The query is like, is there any importance to use Logical system for my Business System which is using for my RFC Adapter in my communication channel.
    Regards
    Gopi

    logical system name is relevant only for Idocs, but it is always a good idea to maintain the technical and business systems with all the information you can provide.
    you can check the logical system names of ABAP application servers at bd54 tx code.
    Regards,
    Henrique.

  • How to create Logical System for ALE?

    Hi All,
       I'm an abaper and want to create Logical System For ALE. When i tried to make it using Tcode: SALE, msg appears that "Caution: The table is cross-client", when clik on continue button it shows "You are not allowed to change cross-client customizing".  Help with proper documentation.
    Thanks in Advance.

    Hi,
    what you did is correct but you don't have the authorization for cross-clients in your sever.First take the authorization for cross-clients then follw the steps
    Here i am giving link go through that and do practice,
    http://www.****************/Tutorials/ALE/MaterialMaster/Distribute1.htm
    http://www.****************/Tutorials/ALE/ALEMainPage.htm
    Reward if it useful
    lakshmi.

  • OCI Catalog for Vendor problem : Logical system for catalog not maintained

    We have set up an OCI catalog with on of our vendors. This works fine untill we transfer shopping basket data from Vendor sysem into our SRM-system (SRM5.0). Then data is not being transfered and Vendor Webshop screen remains 'open'.
    in SLG1 i have found an error "Logical system for catalog not maintained. Inform system administrator'
    Anyone an idea what the cause of this error can be or what we need to check ?
    Thanks in advance

    Hi,
    I have not seen that error before. However, I think it may have to do with the LOGICAL_SYSTEM OCI field. Can you check if your punch-out catalog vendor is populating that field? Also, check if you have the correct BP# populated in the catalog configuration and the LOGICAL SYSTEM Field on the define External Webservices is blank.
    SG

  • Create a client and logical system for BW

    Hi all,
    Can anyone show me how to create a BW client?
         create a BW client and logical system for BW client.
         create sourcesystems for the other clients in BW.
    I have follow some documents
    B84: BI Connectivity
    B03: General Settings BI Integration
    But it's not working the data can't flow to BW server.

    hi,
    check out the following thread's. it will guide you
    Connection steps for SAP BW and R/3
    Info required  while  creating source system
    R/3 Source system creation error in BW 7.0
    regards
    harikrishna N

  • Define one logical system for PI or multiple LS for 3rd-party system?

    Hi gurus,
    We are using IDOC2SOAP and SOAP2IDOC scenario in PI7.11. My question is regarding the logical system(or partner profile) on R3 side. We have two 3rd party system:A and B, so we have two choices.
    1. define one single logical system for PI integration server;
    2. define two logical systems for A and B.
    For choice 1, it seems we can only use one business sytem or business component (business service in 7.0) as the two 3rd party system, especially for SOAP2IDOC scenario.
    For choice 2, it seems we have no restrictions.
    Is it correct?Any help will be appreciated.

    technically you can use both options.
    The question is - do you want all the IDOCs in your R3 system to appear as though they were sent from the PI?
    What if a lot of 3rd party systems were sending the same IDOC (for example - ORDERS) and you want to investigate only those who were sent from system A?
    I like it configured that every system will be identified by a name I give it.
    I just use the IDOC communication channel checkbox of "Take Sender from Payload"
    or use a different service in the IBC that has a different logical system configured in its Adapter specific identifiers.
    Hope it helps,
    Imanuel Rahamim.

  • Error:No Logical system for FI is maintained.

    Hi,
    we are working on SRM 4.0 and i got the below error messages while trying to create the shopping cart from catalog in quality system.
    1. No Logical system for FI is maintained.inform system admin.
    2. Enter company code.
    3. Partner00000123458 not found.
    we have checked org structure in production and quality system,but there is no problem with production. problem with quality system only. even both systems are having same structure.
    can you please advise  where we need to check the settings pertaining to logical system in SRM side.
    Regards,
    SIS

    Hi
    1.Kindly make ensure that all SPRO settings with quality logical system ( ECC as well as SRM) .
    2. check org attribure value  logical sytem too

Maybe you are looking for