How to create Logical System for ALE?

Hi All,
I'm an abaper and want to create Logical System For ALE. When i tried to make it using Tcode: SALE, msg appears that "Caution: The table is cross-client", when clik on continue button it shows "You are not allowed to change cross-client customizing". Help with proper documentation.
Thanks in Advance.

Hi,
what you did is correct but you don't have the authorization for cross-clients in your sever.First take the authorization for cross-clients then follw the steps
Here i am giving link go through that and do practice,
http://www.****************/Tutorials/ALE/MaterialMaster/Distribute1.htm
http://www.****************/Tutorials/ALE/ALEMainPage.htm
Reward if it useful
lakshmi.

Similar Messages

Logical systems for ALE

HI all,
I'm configuring for an IDoc to be generated and downloaded to a file via a file port.
This IDoc is of message type PAYEXT.
The file is to be sent ot the bank via the meansa of third party software.
Do I have to create logical systems for these? Or only the outbound logical system?
Do I also need to set up the distribution model , and if so, how far do i need to set it up?
Points wil be awarded. Thanks!

Hi
Use BD64 Tcode to setup distribution Model
Define the 2 logical systems.
see the flow:
Outbound:
Step 1. Application document is created when transaction is saved.
         2. Message control is invoked.
         3. Messages are processed by system.
         4. Messages are Edited (if desired).
         5. Output (ALE / EDI) is checked
         6. Validate against Message control record from Partner Profile
         7. Application Document is saved.
         8. Entry NAST table is created for every selected output program
              along with Medium & Timing.
         9. Check for Process Immediately .
                 If (yes)
                   Determine Processing Program from TNAPR Table.
                 ELSE
                   Execute RSNASTED Program.
       10. Read Partner Profile to determine Process Code.
       11. Process Code points to the Function Module & Invoked.
       12. IDoc is generated.
       13. Check for ALE Request.
                    if (Yes)
                        Perform Filters, Conversions, Version Changes etc.
                    Else.
                        IDoc is stored in DATABASE.
INBOUND:
Step 1. EDI Subsystem creates an IDoc file from EDI Messages
        2.   Subsystem calls Functional Module                                 EDI_DATA_INCOMING from startRFC program.
         3. Data in Control Record is validate against the Partner                       Profile.
        4. IDoc is generated in Database and syntax check is                      carried out.
        5. IDoc file is deleted once file read.
        6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
                   7. Check for Process Immediately.
               If NO
                 Execute RBDAPP01 Program
               Else
                  Read Process Code from Partner Profile
                       Process Code Points to Function Module
                 Application Document Posted.
further help:
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
Reward points if useful
Regards
Anji

Why do we create logical systems in ALE?

Hi All,
i got this question in interview.
Why do we create logical systems in ALE?
Thanks & Regards
suresh

Hi
In addition to above .
A logical system is used to identify an individual client in a system, for ALE communication between SAP systems. That's why you see a field for 'logical system' in the client master data in SCC4 (table T000).
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
http://help.sap.com/saphelp_nw04/helpdata/en/b5/1d733b73a8f706e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/69/c24ca94ba111d189750000e8322d00/content.htm
http://72.14.203.104/search?q=cache:J-uDLyT0w54J:www.topxml.com/biztalkutilities/walkthroughs/SAP%2520Configuration.pdfwhatislogicalsystems+(SAP)&hl=en&gl=in&ct=clnk&cd=5
http://help.sap.com/saphelp_nw04/helpdata/en/78/217dc151ce11d189570000e829fbbd/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d7/9c73631d6c11d2a56e0060087832f8/content.htm
This guide is really good shows step by step procedure.
http://72.14.203.104/search?q=cache:Xyl0zxpyEXsJ:www.sappoint.com/abap/ale.pdfLogicalsystem(ALE)&hl=en&gl=in&ct=clnk&cd=9
for one client config
http://www.sappro.com/downloads/OneClientDistribution.pdf#search=%22Logical%20system(ALE)%22
Please reward for the same.

Hi how to create logical systems.

Hi,
how to create logical systems. Do we need to create logical system name for creating RFC destinations? plz help me out.
thanks
dhanush.

Hi,
transaction:
SALE -> Basic Settings -> Logical Systems -> Define Logical System
No, you don't need to create Logical Systems to define RFC destinations.
Regards,
Jakub

How to create logical system

Hi,
How to create logical system.
Please help me with the steps for logical system creation in R3 system.
Thanks,
Kelly

Hi,
First make your client modifiable, then follow the below procedure.
Go to transaction SALE or BD54 -> Sending and Receiving Systems -> Logical Systems -> You'll see "Define Logical System" and "Assign Client to Logical System".
For more information use below link.
http://help.sap.com/saphelp_nw70/helpdata/en/da/5990df015b5b43a36f6ce7fa1ee8c0/content.htm
Thanks,
Mano

File to idoc scenario . how to create logical system

logical system asking user authorization what should i do.
what should be logical for whic we should degine partner profiles
apoclnt800 or xi7clnt001

Hi,
The partner profile to be maintained in we20 (in backend systems -ECC/CRM etc) should be based on logical system for the sender.
For ex: Src (File) -> PI -> Tgt(ECC)
In SLD you have created Technical System(TS) and Business System(say BS) for Src. Also a Logical System name (Say LSNAME) is associated with BS.
In ECC, goto tcode - sale, create a logical system of name LSNAME. Now goto we20 and create a partner profile of name LSNAME. Provide the message type of Idoc in the required place.
Souvik

How to create source system for flat file loads

How do I create a source system to load flat file?
I have a screen that asks for the following:
Logical system name
Source system name
Type and release
What should I enter for these?
I am not Basis and Basis was supposed to set this up.

hi sam.
STEPS TO CREATE FLAT FILE SOURCE SYSTEM
step:1 select source systems under modeling in AWB.
step:2 select Source Systems root node.
           |---> context menu
               |--->create......
step:3 select your required source system Icon.
          (in your case it is PC Icon).
there it askes for a logical.......and source system name...
here u can specify any name of ur wish
for example:-
logical sys name --- PC_FF
source system name --- flat file source system*
*press Continue * button.
Observe the activation icon to confirm the successfull creation(_glowing lamp icon_ symbol)

How to Create a system for connecting to mysql 5.0 in VC

Hi
 I am new to SAP. I am working with SAP Netweaver 7 J2EE Version and Visual Composer. I defined systems in SAP EP but i am getting SSO error.
I need to connect to Mysql 5.0 database. I have to access that database in Visual Composer.
Please help me for creating a system and Solving the SSO error.
Any flash presentations or links or materials .. please provide me the link..
Thanks
Mohan

Hi Mohan,
You have to create and configure your system in the system administration tab in the portal.
Usually, it looks like the following:
System from template: JDBC System
Connector properties
 Connection URL: jdbc:sap:sqlserver://<serverlocation>;DatabaseName=<database name>
 Driver class name: com.sap.portals.jdbc.sqlserver.SQLServerDriver
User management properties
 User mapping type: admin, user
Set the system with an alias.
Go to user administration tab and map the user with VCRole to the configured system
(the default for MSSQL is usauly user: sa and pw: admin)
Save your changes and logon to VC with this user.
The alias name should appear in your list of systems.
Hope I helped,
Shay

How to create logical link for report and make that available in webui

Hi All,
Please mention the steps to creae logical link for standard report(BI) or customized report and assiging it to work center,
Thanks,
priya

There is a good guide available from SAP: service.sap.com/crm-inst
It goes into most details you would want to know on including BI reports.
The path is SAP CRM > SAP CRM 2007 > CRM WebClient UI
cheers Carsten

How to create logical columns for current period and prior period

Hello all.
Is there any way in obiee to create a new logica column in BMM layer that says "CURRENT PERIOD" AND "PRIOR PERIOD" OR ONE SINGLE COLUMN THAT SAYS "PERIOD".
In those columns what I need is if it a current period column it shoould have 03/01/2012-03/31/2012 (this month date range)
and in prior period column I shouldhave 02/01/2012 -02/29/2012(which is previous month date range).These columns I will be using in my reports.
Please help me if we can create any such columns with these conditions/requirements

Hi,I have already created he dynamic variables.But I am not getting how to use those variables and create the new logical columns in bmm layer.
this is what I am trying
case when VALUEOF("Current Month begin date"."Current Month begin date") ='..' and VALUEOF("Current Month end date"."Current Month end date")
='..' then 'current period' end
I don't really understand what I should write case when VALUEOF("Current Month begin date"."Current Month begin date") ='..'??

How To Create Logical column For Lastyear To Till Date

Hi All,
I Have to calculate Lastyear to Till Date for Logical Column.
Ex:I have Time Dime and Fact column and Dimension columns.
jan 2011 to oct 2012.
Please Let me know.
Thanks,
Abhi

Looks like you are not reading my messages
Since you are doing on logical columns getting this error.
Try this using physical columns then count from aggregate tab
CASE WHEN "Oracle Data Warehouse"."Catalog"."dbo"."Fact_W_SRVREQ_F_Open_Date"."OPEN_DT_WID" > 20110101 THEN "Oracle Data Warehouse"."Catalog"."dbo"."Fact_W_SRVREQ_F_Open_Date"."SR_WID" END
The same you can go with your variable
Or else the same can do by duplicating the existing Fact - CRM - Service Request"."# of SRs" and just add above code.
or just use the below you dont use sum since already aggregation is happend for # of SRs
CASE WHEN "Core"."Dim - Date"."Year" = VALUEOf("Warehouse Refresh Date Last Year"."CURRENT_CALENDAR_YEAR_LAST_YEAR") AND "Core"."Dim - Date"."Date" < VALUEOF("Warehouse Refresh Date Last Year"."LAST_REFRESH_DATE_LAST_YEAR") THEN "Core"."Fact - CRM - Service Request"."# of SRs" END
Hope this works, mark as correct

Create Logical System in R/3 system

Hi all,
I am trying to define logical system for xMII server in R/3 system using SALE transaction. But the logical system for xMII server doesn't already exist. So I have chosen to create one. Seems there is format like <sys_id>'CLNT'<client>.
1) How to create logical system for xMII server in this format?
2) How does R/3 know in which host xMII server is running? Do we specify that somewhere? Is there any other configurations for linking xMII host and logical system?
I am new to xMII and so not aware of the steps. Please help me out.
Points will be rewarded for helpful answers.
Regards,
Harini S

Harini
Welcome to xMII.
Though i nvr used such things from the SAP R/3 system side, i think the logical system name format must be something like SAPSYS<Number> for SAP Connection BUSCON<Number> for Business Connector. After hving defined the Logical System in R/3 System, u need to configure the SAP Business Connector Interface Action in xMII-based Business Logic Services.
In additional to this, hope this following links will help u to understand more
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3861e693-0e01-0010-e791-9b44d2693e6c
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/201769e0-3174-2910-e287-baa58d198246
Wait till there comes other some suggestions/solutions for ur quieries
Best Regards
Som

Logical system for client 001 for SAP NETWEAVER ABAP TRIAL VERSION for BI

Hi,
I have installed SAP NETWEAVER ABAP TRIAL VERSION for BI. In that I have to create logical system for client 001. I have taken a list of available clients from the abap R3 side. Here is a list of it.
Clients View
Cl. Name City Crcy
000 SAP AG Konzern Walldorf EUR
001 Auslieferungsmandant R11 Kundstadt USD
066 Test EarlyWatch Profiles Walldorf EUR
I cannot get inside the BW side for it asks me to create a logical system for client 001. What to do?
Kindly help me.
Kannan

hi,
? First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
? Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
? You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
? Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
? Then click on the Remote Logon then we go to BW server give RFC SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
? R/3 - B W - R/3
? Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
? PC ?Flat file , DB ? Database
? Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
? BW ? RS1 ? SOURCE SYSTEM ? CREATE MANUAL AUTOMATIC CELL
? R/3 ? Test connections login ? back ? replicate method ? active data R/3 Source system you will able to.
hope it helps u
Ramesh

Logical Systems for client 000 and 001

I've just install solman 7.0 ehp1 sr1 and am going to create a new client from 001.
Do I need to create logical systems for clients 000 and 001?
Do I need to creat rfc's for these?
Thanks,
Daniel

no, no need.
you will create a logical system name for the copied client (such as 100)

ALE logical systems for business service or process

Hi,
I am trying to send an IDOC into my R/3 system. It is the same IDOC type that I have sucessfully sent out to parties. All the config is in place for communicating with the system, because I have sent others IDOCs in the past. However, they always were sent from another R/3 business system. They processed sucessfully.
I am now trying to sending IDOC's from a BPM,as well as, from a business service. They are under the "With Party" section of the directory. These obviously do not have logical systems, so when I try to send the IDOC I get
"Unable to convert the sender service Purchase_Orders to an ALE logical system", where purchase_Orders being the name of the business serice.
How can I handle this problem?
Should I hard code values somewhere?
Which ones?
I have read the other posts for the error above, but my situation seems to be different.
Help!
Chris

Hi,
To solve your problem, here my solution:
1/ In your Business Process of your ID (configurator), go to menu "Service > Adapter-specific identifier" and in the part "IDoc Adapter", write your Logical System.
2/ Create this Logical System on your target system (R/3).
WARNING: XI allows you to used a Logical System for only one service (Business Process). Thus, if you are several interfaces, you must used different Logical Systems.
Mickael.

How to create Logical System for ALE?

Similar Messages

Maybe you are looking for