Cost center substitution not working

Hello,
I have made a CO cost center substitution in OKC9, callup point 1, prerequisites: sales office=1010, sales group=n01, substitution COBL-KOSTL with "na001".
The sustitution is active , I have run program RGUGBR00 but still not working. When I try to make a delivery I get the message that the account needs CO allocation.
I have also try using FI substitution for BSEG-KOSTL, but I can't get the same prerequisites (sales office and sales group).
Please, suggest a soution.
Lavinia

Hi
ABAP code needs to be written in the exit... With in the code you need to read the fields coming in from SD... Ask your abaper if it is possible to use some field symbols and read the data from memory directly
I dont know the technicalities much, but it should be possible to read the fields
br, Ajay M

Similar Messages

  • Search help for cost center does not work after SP upgrade

    Hi,
    Create a shopping cart in SRM and go to the cost assignment tab. When click on the search help to enter a costcenter, we don't get any search help screen.
    Thanks

    Kindly check note: 1259735 Search help of generic account does not work
    Additionally Check the 5th question/answer of note 815849.

  • 2LIS_02_ITM Delta for Cost Center Does Not Work

    Experts,
        I have activated 2LIS_02_ITM extractor and it extracts delta for PO Header and Item changes. However, when I change the 'Cost Center' or 'GL Account' assignments for a PO Item, system does not generate a delta. I have to make another change, e.g. text or something to bring the related change into BW.
    Can someone please advise.
    thanks,
    Kartik.

    Hi Kartik,
        Just ensure you run a job control first on that extractor.A job control would push data from R/3 queue to BW delta queue.Then check the BW Delta queue(RSA7).Then  run the extract checker in Delta mode and check for the delta records. If everything goes fine you should find your delta records here.
    Regards,
    Harold.

  • [CO-CCA] Cost Center Substitution in case of a statistical order

    Dear All,
    We are trying to implement a substitution wherein for a Cost Element, if a statistical order is used it should substitute a Cost Center.
    Below are the steps that were used.
    Prerequisites
    Co Code= 'x' and COBL HKONT= '123456' and COBL-CO_KAAUF = '2'
    Substitution
    COBL-KOSTL ='ABCD'
    However, Cost Center is not getting substituted.
    1) What did i miss
    2) Can the system derived values (ex:COBL-CO_KAAUF = '2') be used as part of prerequisites.
    Thanks & Regards
    Surya Varma

    Hello Surya,
    I think maybe you can add COBL-CO_KAKST = '1' in Prerequisites.
    If this does not work, you can try to use user exit.
    Please also refer to note 392273. I think there is helpful information in this note.
    Best regards,
    Ronghua Fan

  • Plant and Cost Center are not displaying in FI doc. for asset scrap ABAVN.

    Hi All,
    When we do asset retirement by Scraping using Transaction Code ABAVN, Plant and Cost center are not appearing in the FI document. But, in the master data the Plant and Cost center are assigned for the particular Asset. 
    When I see the FI document display, the fields Cost Center and Plant are blank.  Business Area and Profit Center fields are getting updated.
    Can any one help me how to get this Plant and Cost Center in the posted document.  Is there any OSS notes for this.  I am using ECC 6.0 version.
    Thanks in advance for your help.
    Regards,
    Rajesh

    Rajesh
    Aditional on me answer.
    The systemtakes not the cost center from the asset you have to assign it in OKB9 or to fill in during this posting:
    Steps
    Click on Simulate, than you see the posting screen:
    Click on the line (pk 40)
    Click on Goto and Additional account assignment and fill in the cost center whatu2019s in the master record of the asset and post
    An other option is to make a substitution to get this information

  • Binocular search for Cost Center is not returning any data

    Hi Gurus,
    When clicking on the SRM-Shooping Cart-Cost Assignment- Account Assignment Overview- Cost center Binocular search icon,  it is not returning any data.  However,  when drilling down in the Account Assignment Overview, you will see another Binocular search icon for Cost Center which is working fine.
    Any idea of how you troubleshoot it.
    Thanks in advace for your help.
    HA

    Not sure about the cost assignment drill down, but after we applied SP13 to SRM server 550 the binoculars for cost center stopped working. the following note corrected this.
    Note 1259735 - Search help of generic account does not work
    If it has never worked, then probably need to setup a RFC dialog user for the F4 search help, Multiple threads on here around the dialog user for F4 with details on configuration and use.
    JF

  • Costs in Cost Center are not zero after Revaluation at Actual Prices

    I executed:
    1. KSS2 - Splitting  (I use a Cost Center ABC and all Cost Elements in the configuration)
    2. KSII - Price Calculation
    3. CON2 - Collective Processing
    4. I see the report KSB1 of the Cost Center ABC, but Costs are not zero after revaluation.  For example
    Cost Element 61:                        $   1000
    Cost Element 62:                        $   2000
    Activity Allocation  98:               $ -2800
    Revaluation at actual price 98:  $ -100
    TOTAL:                                      $ 100
    Total must be $ 0.00
    We work with thousands of product orders in a month.  Is it possible that the problem was for rounding?
    Thanks in advance for your help.
    José Luis

    Hi Ajay,
    I checked OKEQ configuration, it's equal that you mentioned.
    I have seen that Revaluation registers are using other Exchange Rate.  In OB08 Exchange Rate P is 2.80 ( 1 USD --> 2.80 PEN)
    How ever those revaluation registers are using ERate of 2.14 (1 USD --> 2.14 PEN)
    Why revaluation registers use other Exchange Rate?  Is this the problem that Cost Center is not zero?
    Thanks in advance for your help.
    José Luis

  • HP Officejet Pro L7590 Printer - HP Solution Center does not work

    I am not able to get the Solution Center suite to work because the installation has an error.  I am using Windows 7 Home Premium.  The printer I am installing is the HP Officejet Pro L7590.
    If I go to Devices and Printers and add the printer.  The driver Windows 7 driver would work, it would detect the printer and the test page and everything would be fine. 
    However, if I install using the software provided by HP for the L7590 it would result in an error and it would not work. 
    The failed driver installation is only from installing the full bundle software provided by HP, if by itself through Windows 7 it would be fine.
    Because of the failed installation using HP software the HP solution center does not work.
    In Devices and Printers, the printer has the yellow exclamation point requiring troubleshooting, I click on troubleshoot and no device drivers were found.  In addition, I could not remove the printer.  Before installing the HP software, I could successfully install the printer and there would be a green checkmark, and there would be an option to remove the printer.  This leads me to believe HP has a faulty software bug that is causing the error.
    I am suppose to use the HP add a printer shortcut that populated on my desktop after installing the software, the first time it would show the failure to successfully install the driver, afterwards it would not even detect my printer if it is plugged in.  If I remove the usb and reinsert it, the Windows would just show the failed driver.  I repeat, it failed after I install the software, it works fine without.  The primary reason I want the software is to use the scanning feature.

    Hello NickRT, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having software installation issues.  i would like to try and assist you.
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would reinstalling the HP Officejet Pro Full Feature Software and Driver.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Cost Center does not exist for a particular period - Solution

    We have encountered an error in the subject,
    COST CENTER does not exist for a particular period
    Solution:
    1) Either extend the Posting period for the invoicing  date
    2) Or enter the Cost Center as PO number in Sales Order
    Please do add your comments if there are different ways to solve this error

    The Post contains a solution

  • PO created successfully using BAPI. But G/L, Cost Center are not displaying

    Hi,
    I am trying to create a purchase Order type limit order using BAPI_PO_CREATE1. PO created successfully. when I try to see the PO using ME23N transaction,in  the account assignment tab G/L and cost center are blank. In my BAPI, I am populating all the values in item and account internal tables.
    I am debugging all the time and not able to find why G/L and Cost center are not poplulating in PO.
    Pls suggest me how to finish this problem.
    Thankm,
    Ram

    Hi,
    Are you passing the update flag in POACCOUNTX table?
    regards,
    Ankur Parab

  • Cost Center Substitution - KB21N

    Hello,
    I am trying to use a Cost Center substitution on transaction KB21N to bring in the employees HR Mini Master Cost center when manually charging labor through KB21N. The problem is that the susbstitution populates both Sending and Receiving Cost Centers on the line item.
    This means that I cannot charge labor to orders or project/WBS because I get a multiple Cost Object Error. Has anyone used a Cost center substitution in KB15N or KB21N that can share the experience.? Any help would be appreciated.
    Thanks,
    Justin

    Yes, I can substitute both Activity Type and Cost Center in the Senders. The substitution changes both sending cost center and receiving cost center to the value specified in the sub.  The same is the case for Activity type.
    Sub Rule in this case is below.
    CO Area = '8600' AND
    Personnel No. <> '' AND
    Transaction code = 'KB21N' AND
    Order >= '1000000' AND
    Order <= '1999999'
    Constant sub for Activity Type of "Other"
    Thanks,
    Justin

  • Getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING

    Hi Champs,
    I am getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING_CHECK.
    But when I checked for the particular Cost center, it is mapped to the same company code the program has got executed.
    Example:
    Cost center 1000/150402 does not exist on 17.11.2009.
    Cost center 1000/150402 does not exist
    Cost center 1000/150402 does not exist on 17.11.2009.
    Cost center 1000/150402 does not exist on 17.11.2009.
    Please let me know if you have any guess on this. It is very critical issue for me.
    Thanks for all your help in advance.
    With Best Regards,
    Ravi kanth Yechuri

    Use 0000150402 not 150402 .
    Rob

  • Webi report on OLAP Bex query -  Cost element Hierarchy not working Drill down

    Hello,
    We have a BO report on Bex query, Not on universe, we have a Hierarchy for Cost Element Group, and we are expecting the Drill down functionality for that in BO report, but it does not.
    Webi report on OLAP Bex query -  Cost element Hierarchy not working Drill down
    Any pointers how to do it please
    Thanks
    Krishna

    Hi,
    WebI reports on BEx source don't use same Drill feature as other sources, it's replaced by expland/collapse of hierarchy nodes (documented in WebI user guide in § "24.1 Drill defined"). This means you have to create query which selects all hierarchy sub-tree you plan on exploring later in report, otherwise if no data is available under a node there will be no '+/-' sign to visit this part of tree.
    You could try first to select "All members" from hierarchy in QueryPanel and see if behavior in report suits your needs. Then you should restrict hierarchy member selection to what's really needed to avoid performance issues.
    Regards,
    Loic

  • Notification center does not work at all with mail

    notification center does not work at all with mail there is no sonud no banner . i try to chek and unchek thas box may it is something may effect but still not working where is the notifiication center they said to us about it but i want be fair it's working for imessege and it's not working also for app store update like they said there is abig kiind of joke. i use macbook air mid 2011.

    Have you changed the system voice to an English one in system preferences?

  • Cost Center does not match with the profit center

    Hi Gurus,
    Can you resolve my issue?
    "Cost center does not match the respective profit center of the sales document for freight revenue - Doc Type: RV ( Billing Doc Transfer) Normal Document"
    I request you to all, kindly solve my issue.
    Thanks with Regards,
    Bala

    It appears that you have assigned a cost center to freight cost element and the profit center assigned to the cost center is different from the one derived by the document. As result this message.
    Check the derivation rule for profit center
    Regards
    Rakesh Pawaskar

Maybe you are looking for

  • Control access of a form from another form.

    hi all, Please help me . This is a system which contains a lot of forms (more than 100) . The system administrator can specify whether a user can insert, update,delete or query for each form (this varies for each user). So, when a user logs in and ca

  • HT4241 Can I connect audio to the TV for later model MacBook Pros?

    I have a mid-2009 MacBook Pro and I got an HDMI mini Displayport to HDMI Adapter, but the audio doesn't transfer. Any idea if I need a different cord/cable etc?

  • How can I insert OLE (data) programatically ?

    I need insert many (more than 10.000) OLE (pdf) file into BLOB field. I have tried using a program with DBMS_LOB.LOADFROMFILE procedure. So pdf file are in the Data Base, but those field (data) are not Ole data. If I compare the data in the DB field

  • Capturing data from a RS232 device

    how do I capture data from an RS232 device to my APEX application. Precisely, I am using a barcode scanner and I need to know how to get the barcode data into an item (say P12_barcode) in my application. I have tried the keyboard wedge and the proble

  • How to call or open without specifying the full path?

    hi all, how to call or open without specifying the full path? for example the following code of a when_button_pressed trigger. call_form('c:\test\student.fmx',hide,do_replace); open_form('c:\test\student.fmx'); i want to specify only the form name. c