Cost center wise comparison between FI view and CO view

Hi,
I have one doubt regarding comparison of cost center in FBL3N and in in S_ALR_87013611.
Is there any report in from which I can compare Cost center wise actual spending in FBL3N versus some reports in CO?
I would appreciate if someone help me on this.
Thanks in advance!
Bhargav
Edited by: BHARGAV RASBIHARI PADHYA on Nov 17, 2010 6:10 AM

Hi Bhargav,
If I am not wrong you are taking about the comparison of cost centres values in Co to Cost centre Values in FI.
If this is the case, then its a pain compiling the values. Because, when values flow from FI to CO then dont come to one cost centre, they are spread accross various cost centres where they are incurred.
For Example : You may debit P&S GL account for 10000, but the cost centres involve this expenditure this can be from different cost cetres like from Finance, Marketing, Retail etc.
Now if you want to compare the cost ccentre values with the FI and COthen you can imagine the work and time involved in it.
Let me know if anyone have any different views on this.
Regards,
Mallikarjun

Similar Messages

Cost center wise trial balance GL

Hi Friends,
My clients wants GL trial balance cost center wise. i try the below t.code S_ALR_87012277 - G/L Account Balances , S_PL0_86000030 - G/L Account Balances (New) but system is not showing any data. Please advice any t.code or other soluation.
Thanks & Regards,
Pankaj

Hello,
Please note that there will not be any traial balance.
Only expenses flows to cost centers through cost elements. But, none of the asset balances and liabilities will not flow to Cost Center.
You have to depend on Profit Center for viewing your balance sheet.
Regards,
Ravi

Vendor - asset - cost center wise report

Hi Friends.
Good morning,
Please let me know vendor,asset and cost center wise report ( ie for all vendors at a time.)
Regards
Srini

Hi,
From T.Code: AR02 you will derive your expected report.
for vendor select dynamic selection and select ORIGN DATA Tab here you will get vendor field.
Regards
Viswa

Primary Cost Element Report - Cost Center wise Totals

Dear Seniors,
Requirement is to have a report which gives Cost Center wise Totals (Net posted amount) for Primary cost elements with the following fields --
Company Code
G/L account
Business Area
Cost Center
Accounting Period
Fiscal Year
Net Posted Amount
Debit / Credit Indicator
Currecny
Which Table gives me this information ?
Thanks and Regards
KVKR

Hi
If you are on New GL - Then FAGLFLEXT (Totals table)
If not - Then GLT0 or tables startng with GLT*
You can also use reports FBL3N and subtotal on Cost Element/Cost Center
br, Ajay M

Employee wise posting details cost center wise

Hi
How to get the employee wise posting details cost center wise is there any standard report to know the details
Thanks in advance
Rgds
Radhika

hi Radhika,
U can get the posting results employee wise details and posted wage types using a standard Program....
Go To Transaction Code " SA38"
Give the program as : -
" RPCIP_DOCUMENT_ANALYSE "
Give the Posted Document.
Check Select details with Pers. NO
For giving Payroll Area has selection.
Select tab " Selection of Run attributes"
u can give payroll area here. and In period here
and also since the posting date would be fixed ....u can use that field also....
GL Account u can get.........
The fields are the same that you are getting in the layout.....u can select all the fields for display....
Using tab " Selection for Account assignment "
u can again filter the data....
Try this out and revert

Cost center wise budget

Dear Sap gurus,
Could you please cost center wise budget confuration and availabulity control in system .
purchase value 100000 Name is Cost center1 if i raise of purchase order (Relevant account assignment items) Cost center given then the system should not allowed based on the po with commitment value accross 100000 and we want decrease the value once invoice is released in like 100000- 10000= 90000 .

Hi,
This issue has been answered several times: you do not have a budget control on cost centres, but you can do a workaround.
a) create statistical ordersand assign them to relevant cost centres
b) budget those orders
c) create a validation in CO not allowing posting to the cost centres without providing internal order
Thus, you will have a budget control on cost centre level.
Regards,
Eli

Trial Balance Cost Center Wise

We have created the Cost Elements, in the system for assigning the Cost Centers to these as and when the transactions are recorded. While we can generate the Cost Reports based on the Cost Centers used for capturing the transactions, there is a requirement to generate a Trial Balance as per the Cost Centers. Is there a standard report that can provide a Trial Balance as per the Cost Centers and thus for a particular Group of Cost Centers.
Would appreciate an assistance in this regard.
Thanks in advance.

Hi Bhuveneshwari,
Agree with you that TB will include assets andliabilities as well. To clarify further, what is desired is the list of balances Profit Center/Cost Center wise for only those accounts which form part of the P & L, i.e classified as Revenues and Expenses to prepare a funtional Profit & Loss Account. How can we acheive this. One way is to generate the Cost Reports with all the Cost Elements. Also is it possible to generate a limited TB (including only P&L items) Profit Center wise as referred to in your reply ?
Thanks

WBS list ( profit center wise / Cost Center wise)

Hi All
I have a query on WBS elements, I needed a list of all the WBS elements, Profit center wise & Cost center wise(is it possible to get cost center wise list)..
I am using trans CN43N. Is it the correct report or is there anyother report I need to execute to get the list of WBS elements(profit / Cost centerwise)
Regards
Bala

It s simple to get that using SE16n..
Enter table MARC.. PRCTR is the field for profit cener.. Enter ur prof center and execute..you ll get the list of matreials under the profit center
ALso check ke5z...

Retreiving F.01 Report Cost Center wise

While executing F.01 report GL Code and cost center wise it does match with the FBL3N report by puttiing the same parameters i.e GL Code and the Cost Center.
Please advice....

Hi,
F.01 is for displaying the balance sheet and P&L statement for a company code.
Cost Centers is a cost object where costs will be stored for analysis purpose. If you want to match the Expenses gl balances with F.01 balances, go to FBL3N and take all the Expences GL accounts and execute.
The important one is in all GL accounts should be selected for line item display.
After executing the report change the layout, select the cost center and display subtotals gl wise.
Thanks & Regards,
shashi kanth.

Cost Center wise profitability

Hi All,
We want the profitability analysis cost center wise. Is it possible? If yes, how the Revenue value, sales quantity and the COGS value can be derived for the cost center wise report in KE30.
Please help me as my client has asked this requirement.
Regards
Subbu

Hi Subbu,
Cost center wise rofitability is possible in COPA.
Create Cost center as a characteristic in the COPA structure.
The client has to on what basis the revenue and costs will be divided among cost centers.
It is unusual / Impractical to have Cost center wise Profitability statements as in SAP , Cost centers are used for Overhead Cost control and Management.
Enjoy
Siva

What is the diffrence between SAP View and CAD View ?

What is the diffrence between SAP View and CAD View ?
What is the main purpose of SAP View
and
What is the main purpose of CAD View
On SAP help i found
SAP View is used for :The SAP view displays the SAP structure (document-based structure) for the active CAD object, or another document info record (header document), with a single-level or multilevel document structure in a tree structure. You can variably configure the fields using the layout editor.
CAD View is used for :The CAD view displays the document-based structure of the currently active CAD object, such as the structure of an assembly. The CAD system determines the complete (multilevel) structure and copies it either completely or in stages to the SAP system, in accordance with the default explosion level.
BUT I did not understand it well
Can someone explain this with an example
THanks
Raj

Hello Raj,
SAP View can be further described as the view that is based on what is existing already in the SAP system. This view is generally used by SAP purchasing, MM people etc
CAD view is nothing but the replication of the model tree view in the SAP system. This is used by the design engineer and this view replicates only the parts that are actively displayed on the CAD tool window.
hope this helps. Let me know if you have further questions else please close the message.
regards
N K

Difference Between G/L View and Entry View in New G/L Accounting

Hi,
Can anyone tell me the difference between the G/L View and Entry View in New G/L Accounting as we are upgrading from 4.7 to 6.0.

Hi,
Entry view is the view to show how you have done data entry while posting a transaction and general ledger View is the document splitting view, where system will show you the split posting which system creates on its own.
Example given by Alex above is general ledger View, ie: how system would split the line items based on base item categories.
Regards,
SAPFICO

Add a simple switch to PDF Reader to change between MY-VIEW and ORIGINAL-VIEW

I would like to open pdf file with my same default viewing preference *every single time* that I open a PDF file, regardless of what the original document creator set as the default view. It would be nice to have a SIMPLE switch between MY-VIEW and ORIGINAL-VIEW. It's very frustrating to have to keep switching my view preferences every time I open a new file with a different default.

Thank you Bernd, but that is only part of the solution. For example, I do set the Page Layout to 1-page-continuous. MOST of the time it keeps this setting, but some documents either override that setting, or perhaps it reverts back to a default (maybe with version upgrades?). The other part is that I always want the menu-bar and toolbar to show up. Some documents hide these when they open. I realize that I can hit [F8] and/or [F9] to toggle these, but there are additional settings. I also want to always have the selection tools available, etc. Bottom Line: I just want a collection of settings that I can call up with a single, simple shortcut or button, so I don't have to perform multiple steps just to get the tool back to my standard configuration whenever something changes it.

Differences between view and materialized view

Hello,
Please tell me the Differences between view and materialized view in oracle 9i.
Thanks and regards
Madhuri

How can I create index in a view?
Please read reply of Justin Sir.
Regards
Girish Sharma

Relevance of Maximum Plan Value for Cost Center wise SKF plan Data

Hi,
Will you please tell me the relevence of data entered as Maximum Plan Value for the Cost center wise SKF data plan i.e. data entered through T Code KP46 using planning layout 1-301 with planning profile SAPALL.
Regards,
Partha B.

Hi,
Try 0CO_OM_CCA_1.

Cost center wise comparison between FI view and CO view

Similar Messages

Maybe you are looking for