Cost Planning in CRM Campaigns--Value Distribution Is Incorrect---Error

Hi,
Im working on CRM 2007 (6.0)
I used the standard ones
Planning profile Group--4MKT
Profile--4CRMMP03,
Plan Type--Cost planning
Planning Area--4CRM0001(Marketing Budgeting/Cost Planning)
This is assigned to the category CP in the define planning profile groups node in IMG.
Im able to view this in WEB UI 2007, however when i choose DISTRIBUTE, im not getting the BPS Layout appearing from BI Planning.It is appearing in Tcode-BPS0(BI) perfectly but not in CRM WEB UI.IM getting the error------Value Distribution Is Incorrect
Im basically looking at that layout to appear in the campaign where i can key in my planned costs, resources and then i would like these values to be sent to ECC and BI will extract them and provide reporting.
Is this a standard functionality or should i necessarily use a EEWB field, if so how?

Hi Noah.
Please check the following things:
- Whether the Planning Profile 4CRMMP03 has been activated from Client-000 of BW system and transported to Client-800
- After activating the Planning Profile 4CRMMP03 in Client-000 and transporting to Client-800, go to transaction bps0 in BW system and select the planning profile tree. Right click on it and set the profile.
- Check whether Planning Profile 4CRMMP03 is associated to multi Planning Area, which will consist of basic planning areas.
- Check whether at Planning level, Characteristics and Key Figures are selected and filtered.
Wish this will be useful to you.
regards
Srikantan

Similar Messages

Calculated field in model of easy cost planning

Hi,
I would like to introduce the cost model easy planing a calculated field (characteristic), which was the multiplication of two fields (Characteristics).
I have entered into the transaction CKCM "Easy Cost Planning: Model", I created 3 Characteristics (A,B,C)through the option
"Assign Characteristics to the model."
I entered the "Define the derivation rules (template)" and created a calculation with the two characteristics( C = A * B). The problem I have is that I did not enter the calculation in characteristic 3, which is what I want to pick up the value.
Many Thanks.
Regards.

Hi Vivek,
Thanks for answering.
My question is, how I can assign a calculation in a characteristic?
Characteristic A
Characteristic B
Characteristic C = A * B
I want the easy cost planning screen, enter a value in the characteristic A and B, it will automatically calculate the C and view the calculation in the screen in characteristic C. As I can do?
Thank you very much.

Adding Z-field in tcode CJ9ECP - Easy Cost Planning,

Dear ABAPers,
I have a requirement where I need to display (Display only) MPN (Mat Part no) in Easy Cost Planning screen.
I have extended CI_KISU and CI_CKIS`structure with a new Z-field for MPN and the field is displayed on the screen without any value.
However, which BADI to implement to fetch the MPN.
Should I implement BADI GUI_ITEMIZATION_CK or CP_ADD_FUNCTIONS_CK,
If anyone have done similar taks, would you please share the code of the method, and other information , which method to use and how to go about it.
Thanks
Mahi

Hi Vivek,
Thanks for answering.
My question is, how I can assign a calculation in a characteristic?
Characteristic A
Characteristic B
Characteristic C = A * B
I want the easy cost planning screen, enter a value in the characteristic A and B, it will automatically calculate the C and view the calculation in the screen in characteristic C. As I can do?
Thank you very much.

Is it possible to deactivate to cost plant field once the value is entered and saved

Dear All,
1) Is it possible to disable the cost plan field once the value is entered and saved .
I had used the T-Code BS22 to deactivate the field where in once the budget is entered (CJ30) and saved no further changes can be made to the budget.
Kindly guide me .
Regards
Suvin.S

Hi Suvin,
If you are trying to organise the process to track change documents for project cost/revenue planning I can suggest you looking at claims management process that is common for engineering and construction industry.
For the user status management you might find helpful this article:
Prevent release of WBS-element before Budgeting
Regards,
Paulo

KP06 - No transactions for cost planning are defined in the Nos range table

Dear CO Experts,
I m trying to post Cost Planning using T-Code KP06.
please help, the Error which pops is :
*No transactions for cost planning are defined in the number range table*
*Message no. K8007*
*Diagnosis*
*You want plan primary or secondary costs/revenues in controlling area 9000. This is not possible because no entries exist in the number range table for the cost planning transactions you want to perform.*
*This is an internal system error.*
*System Response*
*Processing is terminated.*
*Procedure*
*Start program RKTKA04C.*
*Execute*
*After the program has run successfully, start planning again.*

HI,
the planning subobjetcs to be assigned in KANK to a CO-number range are (maybe you do not need all of them):
KAZP
KOAP
KPPB
KPPZ
KSP0
KSPB
KZPP
KZRP
PAPL
RKP1
RKP2
RKP3
RKP4
RKP5
RKP6
RKP7
RKP8
RKP9
RKPB
RKPL
RKPQ
RKPS
RKPU
RKPV
RKPW
RKPX
RKPZ
best regrads, Christian

TPM: planning view - value distribution

Hi Gurus,
I have a requirement where the entered advert contribution as a trade spend must be distributed evenly among the assigned products.
We will do the planning either at product or product group level. We use the standard planning profile 4TPM0002 in our trade promotions. When the planning view is displayed we don't have an agregated total line so we have to manually distribute the cost among the assigned products. No automatically distribution takes place. So my question is:
Do I have to set up value distribution in the IMG (SPRO->SAP Reference IMG-> Customer Relationship management->Marketing->Marketing planning and campaign management->Key figure planning->*Maintain value distribution)
Is the above configuration also applicable for TPM or do we have to set up distribution from aggregate level in BPS?
I have the same issue with the uplift to APO.
Regards
Anne

Hello Anne,
Mentioned path is for campaigns only.that is beacause Distribution to target objects is only provided for campaigns and campaign elements.
To answer your Question, you have to set up distribution from aggregate level in BPS.
Thanks
Raja Pamireddy
CRM Marketing Forum Moderator.

How to get cost plan value in tcode 'CJ40'

Hi guys,
Run tcode 'CJ40', user can input the cost in WBS element (in the 'cost plan' column).
Now the requirement is that , we should get the value from this column and I have find some functions. But all don't work.
So seek help from you experts.
Welcome any suggestion!.
Thanks very much!!

Refer COSS, COEP and COSP tables for actual and plan costs.
Thanks,
Santosh

Bill value of Billing plan in CRM

Hi All,
can you please suggest on FM or method to get the Bill value of Billing plan in CRM.
Thanks in advance.
Subhankar

Hi,
This billing paln is generally created for revenue planning during early stages of Project when sales order doesnt exist. You can copy this billing plan to Sales order. Refer [Billing Plan|http://help.sap.com/saphelp_erp60_sp/helpdata/en/4c/22744246e611d189470000e829fbbd/frameset.htm]
Billing will happen when block in billing plan of Sales order is removed. In case of milestone billing, when you confirm a milestone, billing block is removed and you can proceed to Billing.
Regards

Trying to default a cost plan for PS from a CRM contract?

I am trying to default a cost plan (akin to a budget maintained in IM) onto CJ40.
This cost plan will be defaulted via a CRM table maintained especially for the appropriation/budget.
Has anyone defaulted a cost plan onto CJ40 and if so how?
Thanks in Advance,
-SR

Hi,
The message is because your position has the historical record flag (HRP1000-HISTO) set to u2018Xu2019. From SAP help:
Allows you to mark infotype records as historical records. Historical records are permanently stored on the database, so that you can report on the information at a later point in time.
NOTE: You cannot change records once they are marked as historical. As a result, you should not mark records as historical unless you no longer require them for processing.
Typically, the flag is set if a user has delimited an object through PP01. Youu2019d see the historical flag in the window that pops up.
To remove the flag, execute report RHHISTO0, enter the relevant details in the selection and execute. The next screen ill show you which record has the flag set. Select that row and click u201Cremove historical recordu201D button on top. You should then be able to remove cost center from the position.
Hope this helps.
Donnie

Unable to update revenue plan values in Easy Cost Planning

Hi,
Business maintains planned costs and revenues on WBS element using Easy Cost Planning tool. But for one of the WBS element system is not allowing to update/add planned revenue line items.User is able to update the planned costs for this WBS element.
The Legend in Easy Cost Planning screen is Non-Changeable Cost Estimate.
The status of WBS is REL,ACPT(Order Accepted),NSCH(Not Scheduled - Forecast Dates),RESA(Result Analysis Carried out).
We have checked all the business process and all the revenue planning is allowed.
Please guide us on how to resolve this issue.

This is resolved...Select the WBS and click on CLOSE icon to reset the cost estimate. This allows to plan revenues again.

Cost planning

Hi
I am carrying out cost planning using key figure planning.i am able to plan my cost in CRM but i am unaware of capturing of actual costs.Can anyone tell me how i can capture actual costs that is what expenditure i actuallly incur on marketing campaigns.
Thanks
Itty

Hi itty,
You can trace your actual cost by either manually entering cost details or raising a purchase order against the WBS element to calculate the total cost.
Best Regards,
Pratik patel
<b>Reward with points</b>

How to link CRM Campaign to ECC Sales Orders

Dear all,
How to see Sales (R/3) that happened as a result of Specific CRM Campaign execution.
while creating R/3 Sales Order where do we refer relevant Campaign ID.
In SAP how to analyse with respect to Budget, Cost and Actual Sales for a Campaign.
In Campaign where do we enter Budget and Cost information and how will it synchronize with R/3 system for revenue analysis purpose.
What is the standard solution for this and what is the required landscape for this.
Please help me to resolve the above issues, Each suggestion will be highly appreciated.
Best regards
Raghu ram

Hi Raghu,
You have to do the configuration related to Campaign Determination for geting the campaign Id in ECC sales Order.
Pls find the related link to do the configuration
http://help.sap.com/saphelp_crm40/helpdata/en/6b/160ade5eda5b42a0d756961f99a2a1/content.htm
Regards
Vinod

Order cost plan in report CN41N

Hi Gurus,
Would appreciate if any one of share what is 'Order Cost Plan" in report CN41N.
Infact, the values displayed in Order cost plan column neither coincide with either Project Cost Plan nor Actual cost displayed.
Looking forward to hear and thaks in advnace.
Thanks,
PSR

Hi PSR,
Order Cost Plan in CN41N is PM Order Plan Costs figure.
If you create PM Order and assign WBS Element/Project Def in Additional Data Tab of PM Order after planning Material services system will consider WBSE as Costing object and Plan and Post cost on WBSE. It will appears in CN41N in Order Cost Plan column.
Please check
Hope this will help you.
Regards,
Swapnil Kharul.

How to add "Cost Plan Version" and "Planned Cost" into CNE5 report?

Hi,
I would like to display Cost Plan Version(VERSN) and Planned Cost in the CNE5 report.
How to retrieve Planned Cost that based on the Cost Plan Version ?
Appreciate helps. Thanks.
Regards,
See Mun

Plan versions: A plan version is created in accounting and stores different cost plans for a project, such as an "optimistic" and a "pessimistic" plan.
Now coming to plan version 0 is verson where actaul cost is updated in your organisation.
Plan version 1 is used for the planning...
How to see the same in CJE5 is suggested by Virendra..
However there is no filed name planned cost in report but the name of the filed is Proj.cost sched.000
with which you can achieve your result.
path is run txn CJE5>give your Project no.> F8> in new screen> F5-->in new Window scroll down in the right side for the Proj.cost sched.000 filed > with select take the same to left side>Enter--> values will displyed for this field in your report.
similarly you can use the other fields as well... take help of F4, to know the meaning of fileds.
Regards
Nitin
Edited by: Nitin Patoliya on Jan 17, 2009 11:18 AM

Report to display Mat Cost Planned Labour Cost and Over head cost

Hi Abapers,
Greetings of the day..
I need a Report that Display Material Cost , Planned Labour Cost,Actual Labour Cost and Over head value
where do i start from and what are the tables involving in this report..
if already done this A code snippet is more helpful...
Thanks In Advance...
Thanks & Regards
Sathish

Assuming you are talking about Maintenance Order.
Use table: PMCO.
Here the line with field VORGA having value KPPS gives the Planned Costs of the Order in the field WRT01.
Similarly, the line with field VORGA having value RKL gives the Actual Costs of the Order in the field WRT01.
Also have a look at Tcode KKBC_ORD.
Jogeswara Rao K

Cost Planning in CRM Campaigns--Value Distribution Is Incorrect---Error

Similar Messages

Maybe you are looking for