Cost Sheet is not displaying condition values

Hello All,
When i am running the transaction code KGI2.
System is calculating the Overhead values and updating the Actual Overhead cost for the Oder but it is not  displaying the values in the Cost Sheet, when we select Dialog display check box.
Can any one help me out. do  have to do some thing in the Configuration to get this values displayed in the Dialog Display feild.
Best Regards.
Ravi

Hi,
First define the Costing sheet in SPRO
Click new entries and select  define Costing sheet with Description
Now select the costing sheet and double click on the Costing sheet rows, now click new entries
enter row ,overhead  ,description and save
Click Check to check the costing sheet
Assign costing sheet to your Production order..Enter in the assigned costing sheet,r the overhead that have overhead key
Assign overhead key to the overhead group
Regards,
Raj

Similar Messages

  • Sort not Displaying 0 Value

    Hi,
    I have applied a condition for Sorting in ascending order as Top % and 100 for the selected Key Figure.
    However, the report does not display Zero values for the key Figure after sorting.
    How can i take care of this limitation?
    Regards
    Shweta

    Hi Shweta,
    if u r using condition for ascending then ur zeroes should come in that range , if it not then u have to increase  your value limit . But this will depend on your requirement ..
    Regards..

  • BPS Variable-Cost Element is not displaying Text

    Dear Team,
    We have a peculiar issue one of the BPS Variable defined for Cost Element is not displaying text in one of the Planning Layouts.
    Another variable is displaying text in another layout.
    Surprisingly...when I reused the old variable in the new layout it is also not displaying the text.
    Am I missing something....appreciated your quick support.
    Thanks & Best Regards
    Srinivas

    Have you check the layout Lead-Column setting? Is it set to 'Key/Description'?

  • Display extra values not displaying extra value

    Hi,
    I have a SQL query that returns a LOV. I have "Display Extra Values" set to Yes. However, I don't see my "extra value" in the Select List. ?? Yet, when I check the session state, the value in the session state is the extra value. So how come I don't see it in my Select List?
    Thank you.

    This is from the on-line docs:
    To define a value that does not display in the list of values:
    a) From Display Extra Value, select Yes.
    The extra value is used if the actual column value is not part of the LOV. In that situation, the actual value is shown. If you do not display extra values, you may end up with the wrong value and unintentionally update your data incorrectly.
    b) In Null Value, specify the value that displays.
    c) If you have not selected a Named LOV, enter the query used to display a select list in the LOV Query field.
    Hope that helps.
    Thanks,
    Joe

  • Not displaying tax value in condition tab in PO

    Dear MM experts,
    I have a problem in condition tab in PO, I have applied a tax code (input tax) in the invoice tab, the tax (or condition) value is calculating and showing in the tax details.
    But i am not getting the tax value in condition tab and the condition value is showing zero in item condition details.
    Whats the process required to tax (or condition) value in condition tab in PO.
    Plz help me to overcome this problem.
    Thanks in advance
    Prasant Sekhar

    Hi,
    Create the condition record throgh trx MEK1.
    it will appear in Invoice tab  not in Conditions..
    The COnditions in Condition Tab will come through Pricing procedure..
    Thx
    Raju

  • Dynamic Select List not displaying correct value

    Hi there!
    I have a page with a dynamic repeat region.
    As I press one record I get up all the details based on id on an edit page.
    The problem is that the info that is inserted via a Select List is not displaying correct on edit page.
    All the other values are correct, also the values in the repeat region on index page,
    but the value from the Select List on edit page is just displaying the initially selected item.
    Have tried using SELECT DISTINCT in the SQL statement, but no luck.
    Any other ideas?
    Cut and paste from form:
    <select name="Vegtype" class="ProvDet" id="Vegtype" title="<%=(rsAs.Fields.Item("VegType").Value)%>">
                        <option value="Ev" selected="selected">Ev</option>
                        <option value="Fv">Fv</option>
                        <option value="Rv">Rv</option>
                        <option value="Kv">Kv</option>
                      </select>
    Recordset
    <%
    Dim rsAs
    Dim rsAs_cmd
    Dim rsAs_numRows
    Set rsAs_cmd = Server.CreateObject ("ADODB.Command")
    rsAs_cmd.ActiveConnection = MM_LabCon_STRING
    rsAs_cmd.CommandText = "SELECT DISTINCT DatoM, DatoR, DatoU, Distr, FagFelt, Felt, IntNr, Km, KontrNr, Kontrollor, Masse, MasseBK, Punkt, Resept, TestID, UserID, VegHp, VegNavn, VegNr, VegType FROM tblTest WHERE TestID = ?"
    rsAs_cmd.Prepared = true
    rsAs_cmd.Parameters.Append rsAs_cmd.CreateParameter("param1", 5, 1, -1, rsAs__MMColParam) ' adDouble
    Set rsAs = rsAs_cmd.Execute
    rsAs_numRows = 0
    %>
    Regards,
    Christian
    DWCS5 | .Asp | MS Access

    Ok, here goes the top down approach...
    In the HTML header of my page, i have this reference to a js file containing the javascript - <script src="#WORKSPACE_IMAGES#108.js" type="text/javascript"></script>
    Then in an HTML Region I have the following code to create the divs that will be shown and hidden - <div id="divREGION" class="divs">Select region to get list of countries.</div>
    <div id="divCOUNTRY" class="divs">Select country to get list of cities.</div>
    <div id="divCITY" class="divs">Select city and then press "Get Employees". </div>
    Note that these divs contain static content. You may be able to create dynamic content for these divs by creating dynamic query regions and putting div tags around the region (i havent tried this, it may require template modification).
    The select boxes have this code in the "HTML form elements attributes" - onFocus="javascript:showHideDiv(this,true)" onBlur="javascript:showHideDiv(this,false)"
    This onFocus and onBlur call the showHideDiv() function, passing in the object reference of the select box and a true/false to show/hide the related div.
    The actual javascript function that is contained in the 108.js file is:
    function showHideDiv(objThis, inBool){
         var divid = "div" + objThis.id.substring(3);
         if (inBool) {
         ShowDiv(divid);
         else {
    HideDiv(divid);
    That function in turn calls either the ShowDiv() or HideDiv() functions, depending on the true or false, passing in the ID of the div to be changed...
    function ShowDiv(divid){
         eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "inline"');
    function HideDiv(divid){
         eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "none"');
    Hope this helps.

  • Autual cost line items not displaying in cji3

    in sap ps when i tried to see the autual cost line items, but it is  not displaying in cji3 ?
    Can anyone provide me the solution.waiting for response?

    Thanks 4 the rply, problem solved.
    The problem was due to overall budget planning. when i planned year wise it was solved.

  • Plant and Cost Center are not displaying in FI doc. for asset scrap ABAVN.

    Hi All,
    When we do asset retirement by Scraping using Transaction Code ABAVN, Plant and Cost center are not appearing in the FI document. But, in the master data the Plant and Cost center are assigned for the particular Asset. 
    When I see the FI document display, the fields Cost Center and Plant are blank.  Business Area and Profit Center fields are getting updated.
    Can any one help me how to get this Plant and Cost Center in the posted document.  Is there any OSS notes for this.  I am using ECC 6.0 version.
    Thanks in advance for your help.
    Regards,
    Rajesh

    Rajesh
    Aditional on me answer.
    The systemtakes not the cost center from the asset you have to assign it in OKB9 or to fill in during this posting:
    Steps
    Click on Simulate, than you see the posting screen:
    Click on the line (pk 40)
    Click on Goto and Additional account assignment and fill in the cost center whatu2019s in the master record of the asset and post
    An other option is to make a substitution to get this information

  • Setting DAQ channel by property node does not display the value

    I am writing a configuration VI to set channel selection and calibration parameters for an SCXI chassis. I store a default setup in a configuration (ini) file and read that file automatically when the VI is called. The value from the file are set by property nodes using the "Value" property. The values from the file do not display in the DAQ channel selection rings, but the numerical calibration values do display correctly. When I click the down arrow in the channel rings, the correct value displays.
    This behavior exists both in LabView and app-builder EXEs. Also, if I change the property nodes for the DAQ channels to local variables, it works. The Value (signaling) property doesn't cause them to display
    properly either. Why can't I use the property node?

    I don't understand exactly what you are trying to do.
    Please upload a simple VI to demonstrate the behavior you are describing. Remember also to attach the .ini file.
    Best regards,
    Philip C.
    Applications Engineer
    National Instruments
    www.ni.com/ask
    - Philip Courtois, Thinkbot Solutions

  • PO created successfully using BAPI. But G/L, Cost Center are not displaying

    Hi,
    I am trying to create a purchase Order type limit order using BAPI_PO_CREATE1. PO created successfully. when I try to see the PO using ME23N transaction,in  the account assignment tab G/L and cost center are blank. In my BAPI, I am populating all the values in item and account internal tables.
    I am debugging all the time and not able to find why G/L and Cost center are not poplulating in PO.
    Pls suggest me how to finish this problem.
    Thankm,
    Ram

    Hi,
    Are you passing the update flag in POACCOUNTX table?
    regards,
    Ankur Parab

  • Css style sheet will not display images

    If i hardcode my style into the Login header.
    Change my body to reflect my html changes for div tags
    the login displays the way I want.
    If I remove my style and link to an uploaded style doing the following.
    <link rel="stylesheet" href="#WORKSPACE_IMAGES#SAMPLE2A.css" type="text/css">
    the images do not display. Everything else from the style sheet works
    just the images do not.
    I am doing the following to display the images
    #header {background: url("#WORKSPACE_IMAGES#testheader.png") no-repeat; width: 743px; height: 123px; position: relative;}
    is "#WORKSPACE_IMAGES#testheader.png" correct way to display images when doing css
    Howard

    #WORKSPACE_IMAGES# is not substituted in files, such as css at runtime, only in the page template (and other places in apex). The best way that I've found is to define the bulk of your classes in a .css, and only the image attributes in the page template header. Or, you can just store everything on the filesystem in Apache and use relative paths.
    Tyler

  • Filter not displaying all values

    When I attempt to filter a product code. the drop down list (under heading Expression) displays about 100 codes when in reality there are about 2000 values.
    I have changed the Maximum Rows per Page under Search Bar to 2000, but this still does not display all the codes.
    Is there a setting I am missing?

    I think that your description of the problem doesn't help a lot. Are you using interactive reports?
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • Pivot table not displaying the values correctly

    Hi,
    I have created a pivot table in which i am using 2 tables. I pulled columns from table A and one column from table B in the measures section to get the grand total. All the rows are comming fine but, its not returning any values for tableB's column(if i pull it into measures).
    If the column stays under rows section, the report is comming out fine.
    I need the total to be displayed in the report.
    Can some body help me with this.
    Thanks

    Hi David,
    i have set the column's aggregation to sum, and it is comming out correctly in the grand total, how ever, i have some of the coulmns which i am taking the %
    col3= (col2/col1)*100
    col1- aggregation set as Sum, col2 and col3 is set as default
    The values for col3 are comming finr in report , where as it is not returning correct value for garnd total row.
    ex: row w--- col1 col2 col3
    row1-----6630 1130 17.04
    row2 6114 994 16.26
    total 23317 3739 56.40(should be 16.2..)
    For col3 it is calculating like this(3739-total of col2/ 6630 -first row of col1 *100)
    Instead of taking total , it is taking the first row.
    I tried different aggregations, but was still unable to get the correct value. Can you please let me know if i am missing anything.
    Can we define custom aggregations.
    Thanks
    Gayatri
    Edited by: user12589255 on Aug 3, 2011 2:55 PM

  • Loupe not displaying color values Aperture 3.4

    I've been having issues with the color value feature of the loupe disappearing although 'display color values' is checked.  It will stop working after I've been using it for a few hours without incident.  Sometimes fix itself if I quit Aperture, most of the time this doesn't work.  All of the loupe's other functions seem to work normally, even as the color data is not displaying.  I have the issue while tethering and while editing/reviewing.  I use the color value feature often, so it's pretty obnoxious. 
    Camera is compatable, and all my software is up-to-date.
    Thanks for your help!

    What is your MacOS X version? Your profile signature (PowerBook, Mac OS X (10.4.11)) cannot be right, if you are using Aperture 3.4.
    Testing with Aperture 3.4.3 on MacOS X the color values will vanish, when I do not use the "Use Centered Loupe" option. With the "Centered Loupe" the values will always be shown. How is your Loupe set?
    Regards
    Léonie

  • Crystal Report V9 do not display decimal value HELP!

    <p>I have a field in Informix data type is Decimal(6,2)</p><p>when i used the field in the report, the decimal is not displayed</p><p>example: field1 = 305.50, in crystal report it only displayed 305.00, already setup the formatting. any possible solution?, please help!</p>

    <p>have check all the options in my pc and crystal report, all seems to be ok, and have tried displaying an informix field decimal(5,2), and it displays ok (154.23) in my crystal report, but when trying to display the field decimal(6,2) crystal report display decimal up to 99.99, but when it reaches 100+, it will not display the decimal, very weird, help.</p><p>have tried the formula as well but still doesnt work.</p><p>any other possible solutions, pls help, thanks.</p>

Maybe you are looking for