Costing of the operation in the routing

Hai gurus,
I have 5 sets of operation in the routing.
a) Operation 10/20/30/40 and 50
b) In Operation 10/20 and 30 the , costing is active in control key PP01
c) In operation 40/50 the costing is in active in the control key zp01
If that is so, whether operation 40 and 50 will be considered for costing during confirmation or not
regards,
sekar chand

Hi,
If the costing relevancy is ticked in control key & in operation. Along with the relevant prices maintained in KP26, system will do the costing. To double confirm, run CK11n for that material & verify the same.
Revert if you face any issues.
Regards,
Vivek

Similar Messages

The timeout period elapsed prior to completion of the operation or the server is not responding

the timeout period elapsed prior to completion of the operation or the server is not responding.
The error shows while executing a (select query) telerik report in MVC.

Hello,
Did you set the CommandTimeOut property of the SQL Command when you call the connection string to SQL Server?
If your select query is complex or the data is larger, please try to specify connectiontimeout property to maximum integer value.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

SCOM 2012 R2 installing on SQL 2012 SP1 - Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.

Hi,
I am getting an issue during a SCOM 2012 R2 installation while creating the SCOM DataWarehouse database. Setup seems to timeout during creating the datawarehouse database. I can see all database files created in windows explorer on the SQL server before
setup rolls the SCOM install back.
Has anyone seen this issue before or know how to help resolve it?
Appreciate your help, below is the SCOM installation log:
Thanks
Marc
[13:27:27]: Always: :Creating Database: OperationsManagerDW
[13:35:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:43:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:51:29]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:59:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:07:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:15:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:23:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:31:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:39:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:47:33]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :DB operations failed with SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Error: :Error:Failed to execute sql command. Setup has reached maximum retry limit.
[14:55:33]: Warn: :Sql error: 11. Error: -2. Error Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :Exception running sql string
DECLARE @sql NVARCHAR(MAX);
SET @sql = 'CREATE DATABASE ' + QUOTENAME(@DatabaseName) + '
    ON PRIMARY(NAME=MOM_DATA,FILENAME=''' + REPLACE(@Filename, '''', '''''') + ''',SIZE=' + CAST(@Size AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@FileGrowth AS VARCHAR) + 'MB)
    LOG ON(NAME=MOM_LOG, FILENAME=''' + REPLACE(@LogFilename, '''', '''''') + ''',SIZE=' + CAST(@LogSize AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@LogFileGrowth AS VARCHAR) + 'MB)';
EXEC(@sql);: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Always: :Failed to create and configure the DB with exception.: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion
of the operation or the server is not responding.
[14:55:33]: Always: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
String logPath)
[14:55:33]: Always: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Always: :InnerException.StackTrace:
[14:55:33]: Error: :CreateDataWarehouse failed: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or
the server is not responding.
[14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
String logPath)
   at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.OMDataWarehouseProcessor.CreateDataWarehouse()
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Error: :FATAL ACTION: CreateDataWarehouse
[14:55:33]: Error: :FATAL ACTION: DWInstallActionsPostProcessor
[14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate returned false.
[14:55:33]: Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
[14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item. Setting rollback.
marc nalder

Hi,
Based on the log, I recommend you use the following way to test SQL connectivity.
You can use a UDL file to test various connectivity scenarios, create a simple text file, rename the extension from TXT to UDL, fill out the necessary information on the connection tab then test the connection, and troubleshoot as necessary
if it fails to connect.
For more information, please review the link below:
The easy way to test SQL connectivity
http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

System.Reflection.TargetInvocationException: An exception occurred during the operation, making the result invalid.

When I run my app on device and the internet is connected its ok, but if I use the emulator (althought the internet is connected):
$exception{System.Reflection.TargetInvocationException: An exception occurred during the operation, making the result invalid. Check InnerException for exception details. ---> System.Net.WebException: The remote server returned
an error: NotFound. ---> System.Net.WebException: The remote server returned an error: NotFound.
at System.Net.Browser.ClientHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
at System.Net.Browser.ClientHttpWebRequest.<>c__DisplayClasse.<EndGetResponse>b__d(Object sendState)
at System.Net.Browser.AsyncHelper.<>c__DisplayClass1.<BeginOnUI>b__0(Object sendState)
--- End of inner exception stack trace ---
at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
at System.Net.Browser.ClientHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.WebClient.GetWebResponse(WebRequest request, IAsyncResult result)
at System.Net.WebClient.DownloadBitsResponseCallback(IAsyncResult result)
--- End of inner exception stack trace ---
at System.ComponentModel.AsyncCompletedEventArgs.RaiseExceptionIfNecessary()
at System.Net.DownloadStringCompletedEventArgs.get_Result()
at FitnessApp.BL.ServerConnection.wc_DownloadStringCompleted(Object sender, DownloadStringCompletedEventArgs e)
at System.Net.WebClient.OnDownloadStringCompleted(DownloadStringCompletedEventArgs e)
at System.Net.WebClient.DownloadStringOperationCompleted(Object arg)}
System.Exception {System.Reflection.TargetInvocationException}
this is the stack trace:
at System.ComponentModel.AsyncCompletedEventArgs.RaiseExceptionIfNecessary()
at System.Net.DownloadStringCompletedEventArgs.get_Result()
at FitnessApp.BL.ServerConnection.wc_DownloadStringCompleted(Object sender, DownloadStringCompletedEventArgs e)
at System.Net.WebClient.OnDownloadStringCompleted(DownloadStringCompletedEventArgs e)
at System.Net.WebClient.DownloadStringOperationCompleted(Object arg)
this is my code:
void wc_DownloadStringCompleted(object sender, DownloadStringCompletedEventArgs e)
try
if (e.Error != null)
string error = e.Error.Message;
string functionCall = e.UserState.ToString();
if (!string.IsNullOrEmpty(e.Result)) //this line throws an exception
if (functionCall == "getProductCode")
ProductsList productsList = JsonConvert.DeserializeObject<ProductsList>(e.Result);
if (productsList.products != null)
serverProducts = productsList.products.Select(p =>
new BE.Product
Product_code = p.PID,
Product_name = p.Name
}).ToList();
else
serverProducts.Clear();
if (DataDownloadCompleted != null)
if(functionCall =="getProductCode")
DataDownloadCompleted(this, new BE.StringEventArgs("getProductCode"));
catch (Exception)
throw;
public void searchProductCode(string productName)
try
if (DeviceNetworkInformation.IsNetworkAvailable && DeviceNetworkInformation.IsCellularDataEnabled)
wc.DownloadStringAsync(new Uri(baseURI + "get_products_json.php?search=" + productName), "getProductCode");
else
throw new Exception(FitnessApp.Resources.AppResources.ErrorServerConnection);
catch (Exception )
throw ;
Any solution?
thank you..

The server did not find the resource you asked for.
You might want to make sure your emulator is connected to the internet and can go online.
http://blogs.msdn.com/b/wsdevsol/archive/2013/10/01/why-can-t-the-windows-phone-emulator-go-online.aspx

SSRS Error: The timeout period elapsed prior to completion of the operation or the server is not responding

Hi, I am using SQL Server 2008 R2 Stored Procedure as my dataset and running yearly sales report in SSRS 2008 R2. The weird thing is in SSMS the stored procedure does not take more than 10 seconds to retrieve data and the report also works
fine in BIDS, but from ReportServer if I were to pick an year from 1990 - 2014 they all work fine anything prior to 1990 either shows up fine or throws the below error.
SSRS Error:
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'QueryDS'. (rsErrorExecutingCommand)
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. The statement has been terminated.
I checked ReportServerTemDb tables and no table seems to be really large to cause a problem. This report "KeepTogether" property is TRUE.
Thanks in advance.............
Ione

Was able to fix this with the help of
msdn documentation. The query dataset was set to 5 and this was somebody else's report I was fixing and I usually have my report template set to 0 so it took me a while to get there.
Ione

'SERVERNAME' failed to perform the operation. The virtual machine is not in a valid state to perform the operation. (Virtual machine ID "GUID")

DPM 2012 R2
Server 2012 R2 and Server 2012 (R1). Both CSV volumes and Hyper-V hosts with non clustered volumes.
ISCSI Attached Storage. (Nimble SAN)
Every time a VM backup is made this error message occurs:
"'SERVERNAME' failed to perform the operation. The virtual machine is not in a valid state to perform the operation. (Virtual machine ID "GUID")"
The backup seems to finish fine most of the time, but it also seems to be causing some VM's to be in a hung/frozen state when this happens.

Hi Nordland,
So it seems that there are some non-backup operation that is trying to occur on the Virtual machine while the backup is in progress. Does this VM have replication enabled on it. Is there a Hyper-V replica server to which this machine get's replicated?
Regards,
Siddharth Jha

Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft SQL Server)

I am getting the error message, "Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft SQL Server)". I am attaching the stored procedure. Can anyone see where the syntax may
be causing this.
USE [ReportData]
GO
/****** Object: StoredProcedure [PDI].[usp_MJTestTop10_Select] Script Date: 04/23/2015 10:35:43 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
--USE [ReportData]
--GO
--/****** Object: StoredProcedure [PDI].[usp_MJTestTop10_Select] Script Date: 04/23/2015 08:22:26 ******/
--SET ANSI_NULLS ON
--GO
--SET QUOTED_IDENTIFIER ON
--GO
ALTER PROCEDURE [PDI].[usp_MJTestTop10_Select]
@StartDate DATE,
@EndDate DATE,
@Location VARCHAR
AS
DECLARE @CalendarKey TABLE (
Calendar_Key int,
Organization_Key int,
Day_Date DATETIME
BEGIN
INSERT INTO @CalendarKey
SELECT C.calendar_key,
O.Organization_Key,
C.Day_Date AS DATETIME
FROM pdi.PDI_Warehouse_952_01.dbo.calendar C,
pdi.PDI_Warehouse_952_01.dbo.Organization O
where @EndDate is not null
and C.Day_Date BETWEEN @StartDate and @EndDate
or @EndDate is null
and C.Day_Date = @StartDate
END
SELECT CAST(C.Day_Date as DATE) as [Memo Date],
--C.calendar_key,
ISNULL(CAST(MBH.Transaction_Number as VARCHAR), 'Unknown') as [Memo Number],
O.Site_id,
O.Site_desc,
--p.Product_Key,
p.UPC as [UPC],
(CAST(P.Department_ID as VARCHAR) + ' ' + CAST(P.Category_ID as VARCHAR) + ' ' + CAST(P.Sub_Category_Id as VARCHAR)) as [D C S],
ISNULL(CAST(IPF.Vendor_Key as VARCHAR), 'Unknown') as [Vendor Code],
--ISNULL(CAST(V.Vendor_Desc as VARCHAR), 'Unknown') as [Vendor Desc],
ISNULL(P.Item_Desc, 'Unknown') as [Description],
ISNULL(P.Size_Desc, 'Unknown') as [Size],
ISNULL(RTrim(Cash.Cashier_Name), 'Unknown') as [Associate],
ISNULL(CONVERT(INT, IIF.Beg_Inv_Qty, 0), '0') as [Old Qty],
ISNULL(CONVERT(INT, IIF.End_Inv_Qty,0), '0') as [Adj Qty],
ISNULL(CONVERT(INT, IIF.End_Inv_Qty - IIF.Beg_Inv_Qty, 0), '0') as [Dif Qty]
FROM pdi.PDI_Warehouse_952_01.dbo.Item_Sales_Fact ISF
INNER JOIN pdi.PDI_Warehouse_952_01.dbo.Product P ON ISF.Product_Key = P.Product_Key
LEFT JOIN pdi.PDI_Warehouse_952_01.dbo.Organization O ON ISF.Organization_key = O.organization_key
LEFT JOIN pdi.PDI_Warehouse_952_01.dbo.Item_Purchases_Fact IPF ON ISF.Product_key = IPF.Product_Key
AND ISF.Organization_key = IPF.Organization_key
AND ISF.Calendar_key = IPF.Calendar_key
LEFT JOIN pdi.PDI_Warehouse_952_01.dbo.Item_Inventory_Fact IIF ON ISF.Product_Key = IIF.Product_Key
AND IIF.Product_Key = P.Product_Key
AND ISF.Organization_key = IIF.Organization_Key
AND ISF.Calendar_key = IIF.Calendar_Key
LEFT JOIN pdi.PDI_Warehouse_952_01.dbo.Calendar C ON ISF.calendar_key = C.calendar_key
LEFT JOIN pdi.PDI_Warehouse_952_01.dbo.Cashier Cash ON ISF.Organization_Key = Cash.Organization_Key
LEFT JOIN pdi.PDI_Warehouse_952_01.dbo.Cashier_Metric_Hourly_Dept_Snapshot CMH on Cash.Organization_Key = CMH.Organization_Key
AND Cash.Cashier_Key = CMH.Cashier_Key
AND ISF.Calendar_Key = CMH.Calendar_Key
LEFT JOIN pdi.PDI_Warehouse_952_01.dbo.MarketBasket_Header MBH ON ISF.Calendar_Key = MBH.Calendar_Key
AND ISF.Organization_Key = MBH.Organization_Key
AND Cash.Cashier_Key = MBH.Cashier_Key
LEFT JOIN pdi.PDI_Warehouse_952_01.dbo.Vendor V ON IPF.Vendor_Key = V.Vendor_key
AND IPF.Calendar_Key = C.Calendar_Key
LEFT JOIN @CalendarKey CK ON ISF.Calendar_Key = ck.Calendar_Key
AND ISF.Organization_Key = CK.Organization_Key
WHERE C.calendar_key = CK.Calendar_Key
ORDER BY
O.Location_ID,
C.Day_Date,
IPF.Vendor_Key,
P.UPC,
P.Size_Desc

Some additional comments.
@Location VARCHAR
Look closely at this. How many characters can @Location contain? You did not specify, so perhaps you think some appropriately large default value is used. Guess again. You did a similar thing with cast (multiple times) - which is handled
differently. Don't be lazy.
WHERE C.calendar_key = CK.Calendar_Key
Go review the join to the CK table. It is an outer join. Yet you have included criteria in the where clause that requires a match in the unpreserved (@CalendarKey aka CK) table. This effectively transforms that join from outer to inner.
Was that intentional? Probably, but then you don't need to use an outer join
FROM pdi.PDI_Warehouse_952_01.dbo.calendar C,
pdi.PDI_Warehouse_952_01.dbo.Organization O
Evolve. We do not join in the where clause any longer. You should be joining using join operators. And perhaps more importantly, why do you need to dump a resultset into a table variable at all? Note that your join is a cross join
since there is no relationship between calendar and Organization - intentional? Given the rest of the logic, it seems that you don't really need to do this.
ISNULL(CONVERT(INT, IIF.End_Inv_Qty,0), '0') as [Adj Qty],
Go review the documentation for convert. You supply a style, but does it do anything? We don't know what datatype End_Inv_Qty is, but I assume it is numeric (and not float). So what do you intend? And you convert it to integer but
use a character '0' in the isnull function. Your lack of consistency can lead to issues that are difficult to find and resolve.
CAST(C.Day_Date as DATE)
Why are you doing this? You defined the column in your table variable as datetime. You cast the value you use to populate this column to datetime. I'm guessing that you only really care about the date portion. The name you used for the
column implies this. So why bother with datetime in the first place?
And one last suggestion. If you disallow the use of NULL for the @EndDate argument (simply supply the same value for both date arguments) you can simplify the logic that populates your table variable (or its replacement) and greatly eliminate the confusion
and chance for errors that nullability requires.

I'm trying to sync/back-up apps on my iPhone 3G and iTunes keeps telling me it can't complete the operation because "the apps on my iPhone cannot be determined." What the **** does this mean?!

I'm trying to sync/back-up apps on my iPhone 3G and iTunes keeps telling me it can't complete the operation because "the apps on my iPhone cannot be determined." What the **** does this mean?!

Same problem. Wish I knew.
When I tried to Restore, I got an Error 13xx and it won't even do that.
not a happy camper if a phone this expensive stops working in 2 years.

Outlook 2013 Changing Shared Calendar Appointment Categories causes error The Operation failed the messaging interfaces have returned an unknown error

Hi
Our user used to be able to change the categories in a shared outlook calendar appointment but is now getting the error:
The Operation failed the messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.
We have tried re-creating the mail profile but still get the same error.
If anyone has any other suggestions, that would be great, thanks.

Glad to hear that it works fine in new profile. It seems your old OST file or other file in profile is corrupted. After you create a new profile, Outlook would re-sync your mailbox to a totally new OST as the data file.
Tony Chen
TechNet Community Support

Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. This failure occured while attempting to connect to the Principle server.

We are using SQL Server 2012.
Every now and then, when we execute the below stored procedure INSERT_INTO_MYTBL, we got the below error, and it returned @ID = 0.
"Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
This failure occured while attempting to connect to the Principle server."
What causes this error, and how can we fix it ?
Thank you.
create procedure INSERT_INTO_MYTBL
@ID int output,
@Order varchar(50) = NULL,
@ACCOUNT varchar(20) = NULL
AS
DECLARE @Success int, @TryNr int, @ErrMsg varchar(500), @ErrNumber int, @expected_id int;
SET @Success = 0;
SET @TryNr = 1;
SET @ErrMsg = ''
WHILE @Success = 0 AND @TryNr <= 3 and @ErrMsg = ''
BEGIN;
BEGIN TRY;
BEGIN TRANSACTION;
retry:
BEGIN TRY;
SELECT @expected_id = ident_current('myTbl') + 1
SELECT @order = @account + '-' + CAST(@expected_id AS varchar(50))
insert into myTbl
([Order],ACCOUNT)
values
(@Order,@ACCOUNT)
END TRY
BEGIN CATCH;
SELECT @ErrNumber = ERROR_NUMBER()
IF @ErrNumber = 2627
BEGIN;
GOTO retry
END;
ELSE
BEGIN;
SET @ErrMsg = '1.' + ERROR_MESSAGE() + ' ' + @order
RAISERROR (@ErrMsg, 16, 1);
END;
END CATCH
select @ID = SCOPE_IDENTITY()
IF @id <> @expected_id
BEGIN
UPDATE myTbl
SET [Order] = @ACCOUNT + '-' + CAST(@ID AS varchar(50))
WHERE ID = @ID
END
SET @Success = 1
COMMIT TRANSACTION;
END TRY
BEGIN CATCH;
ROLLBACK TRANSACTION;
SELECT @ErrNumber = ERROR_NUMBER()
IF @ErrNumber = 1205
BEGIN;
SET @TryNr = @TryNr + 1;
IF @TryNr > 3
RAISERROR ('Giving up after 3 consecutive deadlocks for %s', 16, 1,@ACCOUNT);
END;
ELSE
BEGIN;
SET @ErrMsg = '2.' + ERROR_MESSAGE() + ' ' + @order
RAISERROR (@ErrMsg, 16, 1);
END;
END CATCH;
END;

When the problem occurs, the stored procedure returns @ID = 0, which I think means the query
When the problem occurs, the procedure does not return anything. SQL Server was told to stop executing. Furthermore, unless you issue the command SET XACT_ABORT ON, SQL Server will not roll back any open transaction. Which is one more reason you should not
permit command timeouts.
As for why this procedure sometimes take a long time, I would primarily suspect locking. When this occurs (but before the timeout elapses!), you could use my beta_lockinfo to see if there is any blocking going on. You find it here:
http://www.sommarskog.se/sqlutil/beta_lockinfo.html
Erland Sommarskog, SQL Server MVP, [email protected]

WINRM error : The WinRM client cannot complete the operation within the time spe cified

Dear All
Please find
We have developed a management pack on RMS which is analyzing information from linux by using module with calling winrm.
In mentioned module before calling winrm through netcat , the agent status will be controlled on target host.
But this error on specific sles host will halt the executing workflow .
This workflow will working successfully after couple of intervals and again the error coming up.
Although the workflow is halting by the mentioned error a task that used the same module is working fine without any error on that host and
This workflow is running on other instances of the discovered class correctly
(on SLES hosts sles11 and sles10 64bit) .
Error :
The WinRM client cannot complete the operation within the time spe cified. Check if the machine name is valid and is reachable over the network and firewall
exception for Windows Remote Management service is enabled. Error number: -2144108250
The WinRM client cannot complete the operation within the time specified. Check if the machine name is valid and is reachable over the network and firewall exce ption for Windows Remote Management
service is enabled.
Linux host :
SLES 10 32 bit
SP2

Hi,
Any error or warning for the operation manager log under event viewer?
Based on my research,
Possible Causes for this issue:
The host is unreachable due to incorrect name resolution, network outage, or
host outage
A network or host-based firewall is blocking TCP port 1270 connectivity to the target host
Resolutions
Verify that Management Server can ping the agent host by Fully-Qualified
Domain Name
Verify that no network firewalls or host firewall is blocking TCP port 1270
In addition, check whether you have heartbeat failures in your environment for linux, if so, please go through the below link:
OpsMgr: UNIX/Linux Heartbeat Failures After Applying KB2585542
http://operatingquadrant.com/2012/01/12/opsmgr-unixlinux-heartbeat-failures-after-applying-kb2585542/
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

1488: The workstation is no longer imported to the tree from where you are attempting to launch the operation. The Remote Management session cannot proceed.

After upgrading a Windows XP Pro SP1 machine to the ZfDagent from the
zfd65u2 patch I receive the following error:
1488: The workstation is no longer imported to the tree from where you are
attempting to launch the operation. The Remote Management session cannot
proceed.
For now I have went back to the ZfD 4 IR5 agent which doesn't exhibit this
problem. Any ideas?
Jim Webb

Jim,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Can I restrict the operation of the "magic wand" to a single artboard?

CS4 on a Mac. Can I restrict the operation of the "magic wand" to a single artboard without moving that artboard to a different layer? At present it selects all the similar items on the active board as well as all the other boards on the same layer.

Hi MarieMeyer,
I'm not sure if this works on CS4, but one thing you can try is to click Window + Magic Wand to open your tool settings.
There, you should see a check mark next to Fill Color. Uncheck fill color. Now, make sure everything is deselected, and then try using the magic wand tool. You may need to play with your Tolerance setting to get it to select the way you want.
Hope this helps!

Timeout expired. the timeout period elasped prior to completion of the operation or the server is not responding

HI All --- i am facing " Timeout expired. the timeout period elapsed prior to completion of the operation or the server is not responding " facing this issue every second day in our database.. for the rectification we just restart
the DB instance and its start working fine..... although database is in working condition and other databases in same instances are working fine, please suggest me any remedy to get rid from this issue.

Imran,
Check this:
http://sqlserverplanet.com/troubleshooting/fix-timeout-expired-the-timeout-period-elapsed-prior-to-completion-of-the-operation-or-the-server-is-not-responding
(similar thread)
http://social.msdn.microsoft.com/Forums/silverlight/en-US/685816f3-8d06-4411-8d00-d34c48c2938d/timeout-expired-the-timeout-period-elapsed-prior-to-completion-of-the-operation-or-the-server-is?forum=silverlightgamedev
http://blogs.msdn.com/b/spike/archive/2008/07/31/timeout-expired-the-timeout-period-elapsed-prior-to-completion-of-the-operation-or-the-server-is-not-responding.aspx
Thanks,
Jay
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

Connecting to remote server failed - WinRM client cannot complete the operation within the time specified

Exchange 2010 SP2 Active DAG Node. Cannot cannot to Exchange Admin Console with the following errors and these errors change from time to time ... and some times it works ...
attempt to connect to http://DAGNODE.domain.com/powershell using "kerberos" authentication failed: connecting to remote server failed with the following message: The WinRM Client cannot complete the operation
within the time specified. Check if the machine name is valid and is reachable over the network and firewall exception for windows remote management service is enabled.
thanks,

Hi,Philip,
Are you running the DAG on Windows server 2008 R2?If so check the following KB to see if they apply to your issue
http://support.microsoft.com/kb/976839
http://support.microsoft.com/kb/2294243
And you can check if the solutions in these old threads with similar error message do the trick for you.
http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/54af902c-d718-4656-8a25-7c150e4b0e81/
http://social.technet.microsoft.com/Forums/en-US/exchangesvradminlegacy/thread/baa1af25-001a-432d-86a0-25c05655e63c/
Regards,
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

TS1702 I'm having trouble updating my apps. the message that appears is that the security code of credit card is invalid. already talked to the operator of the card and everything is ok.

I'm having trouble updating my apps. the message that appears is that the security code of credit card is invalid. already talked to the operator of the card and everything is ok.

The address on the billing statement from the credit card company must match the information that you have filled in on the fields in iTunes when you set up the account. In other words you cannot abbreviate in iTunes if the information for you billing address is not abbreviated on the statement that you get in the mail. If the statement lists your street as "Street" and you type in "St." - that can cause issues. If that's not the problem, sign out of your ID, restart the iPad and sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again.

Costing of the operation in the routing

Similar Messages

Maybe you are looking for