Could I set up 2 different CCode belong to 1  Controlling Area

Hi All
Could I set up 2 company code with different chart of account belong to 1 controlling area?

Hi,
Basic point to use same controlling area ... u should use same chart of accounts, fiscal year variant.
Any of the above coditions are not satisfied, in that case u r not allowed to use same controlling area for different company codes
all the best
Prasad

Similar Messages

  • Different sales organization single credit controle area

    Hi,
    Different sales organization single credit control area is it possible

    Yes. It is very much possible & pratically used by most of companies using SAP.
    Just go thru SAP documentation in this menu paths & you will understand.
    1. IMG - Enterprise Structure - Assignment - Financial Accounting - Assign company code to credit control area
    2. IMG - Enterprise Structure - Assignment - Sales and Distribution - Assign sales area to credit control area
    Hope this helps,
    Thanks,
    Jignesh Mehta

  • Different fiscal variant for same controlling area

    Hi,
    as my client requirement is having 3 company codes two having same fiscal year variant another having different fiscal year for legal requirement operating under same same county.
    i have maintain all the setting for the 3 company codes but .
    but when i enter to maintain controlling area  OKKP.
    system is throwing following error.
    Differing fiscal year variants: V3 - ZP
    Message no. KT297
    Diagnosis
    Fiscal year variant V3, controlling area SQRE, does not agree with fiscal year variant ZP, company code 3000.
    The following entries must agree:
    u2022     Same number of posting periods (the number of special periods may vary)
    u2022     Same period limits
    Procedure
    Ensure that the fiscal year variants of the controlling area and the assigned company codes agree. If necessary, maintain the fiscal year variants.
    Please suggest me how to proceed further in this case.
    thanks
    kareem

    Hi Kareem
    What you are doing is not correct
    All comp codes under the Contrr Area must have same FYV and same Ch of accounts
    1. Go to IMG and assign same FYV to the 3rd comp code
    2. Go to IMG > FI (New) > Global Settings > Ledgers > Define and Activate Non-Leading Ledgers
    Here,  activate parallel ledger for this 3rd comp code and assign the other FYV in the parallel ledger
    Also maintain the Doc No ranges for parallel ledger because your FYV will be different between Main and Parallel ledger
    br, Ajay M

  • Company codes with different fiscal year variants in a controlling area

    Hi all,
    When I try to assign a company code with different fiscal year variant than controlling area I get error. It is ok so far.
    However, after assigning company with same fsv to controlling area the system lets me to change company code's fsv in company code global settings and I can even save it.
    So I wonder how it would be possible ? Why do I get just a warning instead of an error and save ?
    Thanks and regards.
    M.Yusuf Dogan

    Hi Bulut,
    There are 12 normal and 3 special periods in the fsv of the company code which i'm trying to assign. However, controlling area's fsv has 12 normal and 4 special periods.  I get an error message "KT297".
    Actually, my point is that if the company code's fsv is same with co's I can assign but the system lets me change cc's fsv after assignment.
    M. Yusuf Dogan

  • Set up controlling area in HCM

    Hello all,
    We are trying to get cost-centers from FI to HCM through an interface. For this I need to set-up controlling areas in HCM client. Can anyone help me with  the necessary procedure to set-up/configure a controlling area in HCM system.
    Thanks a ton in advance.

    Hi
    Setting up or defining of Cost centers and Controlling Areas are the functions of a FICO consultant and not HR. Ask the FICO consultant to create what you need and they will sit with you for a final conclusion and decide on what to do and what to create according to the business scenario.
    If you have the authorisation for defining goto SPRO - enterprise structure - Definition and there you define controling araes. (Look at the implecations on creation as they are linked in many places)
    R K

  • HP Laserjet M401A could not set different paper size and tray on printer properties

    Good morning all. I'm experiencing a issue setting custom paper size and tray in this printer properties. I would like to set up three different printers, on the same port, to print directly on a specific tray (without enter the printer properties and select the proper tray and size). I have this printer with the additional third tray. I have set up A4 in tray 1 (bypass), custom size in tray 2 and 3 on the printer. When i enter the printer PROPERTIES i want to set up set custom paper size in tray 2 and 3. No way.The only sizes i can see is 13x8, a4, a5, letter, legal, and so on (there are maybe 7 choices). So i choose NOT SPECIFIED. When i go on printer PREFERENCES, i can set up my custom paper size.But when i choose my custom paper size, the tray 2 and 3 go away and i can only choose bypass or tray 1.If i set up A5 (for example) the tray 2 and 3 re-appear. How is it possible? where i am wrong? Many thanks, any help would be appreciated.Cheers,Luca.

    I have done extensive research online and looked for relevant posts in other forums, plus I downloaded a LaserJet 4L service manual. The verdict: A common cause of this no-power problem is a faulty DC controller board, blown fuse(s) on it, or other circuitry glitch. I am sure that the paper tray is inserted correctly.
    So I decided to cut my losses (I'm not inclined to pull the printer apart to try to fix it--it's not worth my time) and tossed the printer. It's not cost-effective or time-effective to spend a lot of money or time to resuscitate old hardware, except perhaps as a learning exercise.
    I consider this thread now closed.

  • I have just brought 2 mini's for my boys for xmas.  1. can I connect them both to my existing Itunes account or do I need to set up something different. and 2. can they be used on their dads account as well as mine, or only one?

    I have just brought 2 mini's for my boys for xmas.  1. can I connect them both to my existing Itunes account or do I need to set up something different. and 2. can they be used on their dads account as well as mine, or only one?

    You can set them up with your Apple ID if you want to. You can also set them up with their dad's Apple ID. Depending on how old the boys are, you can even let then have their own Apple ID's. The one thing that you don't want to do is have them use more than one Apple ID on their iPads.
    If you want to be able to share purchased content, then setting them up with either your ID or your husband's (?) ID would be the way to go. If the boys share an ID with one of you, they can download content that you have already purchased without having to pay for it again.
    If you and have the financial wherewithal to allow them to purchase their own individual content, I would recommend letting them have their own Apple ID. This way, as they grow older and eventually move on, they will have their own accounts, their own purchases .... No ties needed to your ID or to dad's ID. FaceTime and Messages will be a little easier to set up if they have their own ID's and they can have their own iCloud accounts as well. However, they must be 13 years old in order to have an Apple ID and iTunes account. If they are under 13, then it's a no brainer you will have to use yours or their father's ID.
    Whatever you decide to do, just don't switch from one ID to another ID on the iPads. That gets confusing and they could end up locking themselves out of one of the ID's for 90 days if they download a past purchase using a different ID.

  • Can I use the same music file for two accounts to be able to set up two different iTunes accounts?

    I would like to set up two different Itunes accounts on my mac.  I would like to have different accounts for my wife and I so that our devices have different accounts/contacts/email and stuff but we would like to use the same music library.  Can I set the different itunes to go to the same file to see music?  Or could I copy the music file and give the copy to the second itunes account?  I could set it up and authorize the music like for another user?  Is any of this possible?

    Hello 19firedude
    Try moving the entire iTunes Media folder to the Shared folder on your Mac and then in iTunes preferences, change the location of that folder to line it up. Then all you have to do in another user is follow the second set of steps to get that shared properly. Check out the article below for more detailed instructions.
    iTunes: How to share music between different user accounts on a single computer
    http://support.apple.com/kb/HT1203
    Regards,
    -Norm G.

  • [Apache 2] Critical error mod_rewrite: Could not set permissions on rewrite

    Hi,
    Well I had a look around to this problem and it seems it is specific to mac os system on intel machines, so I send my post here.
    I had installed the apache 2 server from www.serverlogistics.com and it seems to start. However it is impossible to log into my local website with an error in my web browser "can't log to "localhost" server".
    By reading the logs I got in /Library/Apache2/logs/error_log (where there is also a httpd.pid file): [crit] (14)Bad address: mod_rewrite: Could not set permissions on rewriteloglock; check User and Group directives Configuration Failed
    So, I commented the line "LoadModule rewrite_module modules/mod_rewrite.so" in /Library/Apache2/conf/httpd.conf with no efffect at all.
    Then I don't know what to do.... any idea please ?
    NB : I did not configure or set any htaccess file in any directory.
    Denis

    denis_4l wrote:
    Hi,
    Well, I had tried several ways among others MAMP. With, MAMP, I experienced some problems running MySQL and or Apache server.
    If you'd like help, you need to describe the specific problems you're having. You're not giving people here much to go on in order to be able to help. Without knowing what you've already tried, and what the results were, it's impossible to say if you've just made a simple mistake or if you've truly hit upon something that won't work. The Apache logs are especially helpful, with lots of detailed information to help in troubleshooting.
    To say the true, I bought this Macbook because the system kernel is 100% compatible with Linux, and I was full of naives hopes, thinking that I will install/compile easily softwares that are usual under Linux world.....
    I certainly haven't had much problem compiling and installing software that's distributed as source code, though I haven't tried to compile Apache. While it's true that much of the software will compile, it's also true that you might have to make some small changes here and there to the source code to get it to work correctly. But you might also have to do the same thing to get them to compile on different Linux distributions. So OS X isn't that different in that respect.
    If you want to get Apache 2 running with MAMP, post back with specific information on what problems you had and I'll try to help. I've been hacking at Apache installations for many years now, so if I know the problems you're having, there's a good chance I've been through them, too.
    charlie

  • How could I set a fixed window for all resulution?

    because I design the website in MAC when I transfer to PC it
    change shape
    how could I set a fixed size window for all resulution?

    Using layers for page layout is just asking for trouble.
    Trouble with
    centering content, and trouble with expanding text.
    Use tables until you can manage a proper CSS layout scheme,
    i.e., NOT
    layers. Start here -
    http://www.projectseven.com/tutorials/css/qdmacfly/index.htm
    http://www.macromedia.com/devnet/mx/dreamweaver/css.html
    http://www.macromedia.com/devnet/dreamweaver/articles/tableless_layout_dw8.html
    http://www.macromedia.com/devnet/dreamweaver/articles/css_concepts.html
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Media Fusion" <[email protected]> wrote in
    message
    news:[email protected]...
    > What would you suggest then, and why not layers? I am
    just going off of
    > what I
    > know and I am completly open for correction or cretique
    on process,
    > thought
    > process etc...
    >
    >
    quote:
    Originally posted by:
    Newsgroup User
    > Ugh.
    >
    > Layers? Surely you jest?
    >
    > --
    > Murray --- ICQ 71997575
    > Adobe Community Expert
    > (If you *MUST* email me, don't LAUGH when you do so!)
    > ==================
    >
    http://www.dreamweavermx-templates.com
    - Template Triage!
    >
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    >
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    > ==================
    >
    >
    > "Media Fusion" <[email protected]>
    wrote in message
    > news:[email protected]...
    > > yes excatly, nothing should change when you bring
    the files from mac to
    > > pc, the
    > > only thing that may be a slight issue is how you
    coded the fonts for
    > > text.
    > > As
    > > long as you set it up with pretty universal fonts
    not much should
    > > change.
    > > I go
    > > cross platform all the time, code is code. If you
    want to really contain
    > > the
    > > positiong and location of your site design look in
    to using layers in
    > > combination with tables. That fixed my problem with
    how different
    > > browsers
    > >
    >
    >
    >
    >
    >
    >

  • Could Not Set Up Apple Pay

    Can't seem to setup apple pay. Have tried both in settings and passbook. I get the same error.
    "Could Not Set Up Apple Pay
    An error occurred while setting up Apple Pay"
    Anyone have any ideas why this is happening? I have re started the phone twice, nothing. Same error. Can't get pass the "Add Credit or Debit Card" link.
    Thanks!

    I have two different email addresses for my iCloud and iTunes accounts, and the email I used for my iCloud was never set up for iTunes. After I signed out my iTunes account and signed in using the same email as my iCloud account, I was finally able to set up Apple Pay. I can see this can be a common problem for many people like me, Apple needs to provide an update to fix this bug.

  • How can we copy an enhancement set to a different Business Role?

    Experts,
    How can we copy an enhancement set to a different Business Role?
    Currently we have an enhancement to a Business Role "SALES PRO."  How can i make the same enhancement set active for a different Business Role? ie. MARKETINGPRO.
    Thanks,

    Hi,
    it is recommended to have only one active enhancement set per client.
    For your businessrole you could use the role configuration key.
    In our system each businessrole has it´s own role configuration key. But we implemented also a BADI if no configuration is found use our company default role configuration key and only if there is also no configuration use SAP .
    Kind regards
    Manfred

  • Could I set-up CUA from sap 4.7 to sap NW04s

    Hi Gurus,
    Could I set-up CUA from sap 4.7 to sap NW04s?
    I mean, CUA system in version 4.7 and one of the child systems NW04s.
    Please let me know the possibility and any dependency?
    Regards,
    Surya

    In principle you can mix systems of different releases in one CUA landscape; and you can also freely choose any of them to be the CUA master.
    However, you should keep in mind that new features and thus potentially also new user master data attributes will be added with newer releases. Therefore it is generally advised that the CUA master system should have a newer release. Otherwise the CUA master system would not be capable of storing and providing user master data attributes which might be demanded by some CUA client systems.
    Cheers, Wolfgang

  • My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

    my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

    Hi,
    To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
    Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
    Give the datasource name, then the database name.
    You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
    There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
    It will be like this <service name> <portnumber>/tcp
    Hope this helps...
    best wishes,
    Nish

  • How do i set up two different ID accounts to one Mac

    I have a Mac book pro and was wondering how you set up two different user ID's to one Mac.
    I have logged out of itunes and set up two different libaries, when I log into one libary and log into Itunes all of my origional music is shown but when I log into the additional user ID and again into Itunes none of my purchases are shown.
    If i go onto my account i have authorised the Mac but in my account it says only one computer is authorised to play / download purchases.
    Any ideas on how to download my origional purchases?

    Move them from one library to the other, or click here and follow the instructions.
    (100046)

Maybe you are looking for