Could JMF share the webcam with other applications?

Greetings,
There is an applet which captures images from the webcam using JMF. While this applet is running, other applications can't capture images from the same webcam anymore.
Would it be possible to set JMF in such a way to allow webcam sharing.
Thank you.

Unlikely
When your app connects to the webcam it does so by requesting one of the several formats that the driver is capable of providing
The driver s/w then no longer accepts requests until your app finishes
So you have 2 options
1) Get hold of the Driver source code & see if you can modify it to provide a multiplexed (or buffered) multicast stream service to wich any application can connect to
2) You can build a Java Service that does the above, then write you app to make use of that service
The only problem will be what format to choose that suits all apps

Similar Messages

When I'm using a browser (like Safari), how can I shrink it and share my desktop with other applications?

I have an iMac, and after installing Yosemite (OS 10.10), all my browsers (like Safari) no longer share the screen with other applications, like Word or even Calculator. How can I shrink Safari (or any browser) and share my desktop with other applications?

Yes, mission control threw everything across the screen (which is way beyond anything I could figure out), but the real answer I needed came from Apple Tech Support, which I finally called, and I learned about the two arrows in the top righthand corner, when I held the cursor there, which turned blue and resized and released the browser from total domination of the screen. Those two, opposite-pointing arrows allowed me to shrink the browser and let other applications be seen on the desktop. But thank you for extending a helpful tip, which I can use another time.

When I'm using a browser (like Safari) in Yosemite, how can I shrink it and share my desktop with other applications?

I have an iMac, and after installing Yosemite (OS 10.10), all my browsers (like Safari) no longer share the screen with other applications, like Word or even Calculator. How can I shrink Safari (or any browser) and share my desktop with other applications?

When I'm using any browser (at the moment, it's Safari), I am unable to resize the window. The browser BECOMES my entire desktop. And if I open another application, suddenly the browser vanishes to the right, so I can only see the other app. AND my dock disappears into a solid black space below the screen, which I can penetrate with my curser (after dragging the curser back and forth above and below the black space until the dock eventually reappears. But if I select any app in the browser to open, then Safari vanishes instantly to the right of the screen. I've tried to resize Safari (and Firefox and Chrome) by moving the curser to the bottom right of the browser, but that old standby doesn't seem to work anymore. The browser takes up all of the screen, except for a small portion of the top, where my curser can reveal Safari's old menus, and the bottom of the screen, which is entirely black until I can locate my dock by dunking the curser up and down in the black ooze.
I really want the old convenience of my Mac, where several programs can open side by side, but Yosemite seems to have precluded that possibility. What can I do?

Sharing with others but only allow author and co-author to share the file with others

I have tested this option but have difficults to have the proper function.
If a co-author recieves a link to the document that the author has shared with him.
What is the mechanism that hinders this person to read that file that the co-author has send him.
I have been playing with myself in diffrent roles but running out of mail adresses and understanding.....
Please give an explanation.
regards

In the sharing dialog (where you enter the email addresses) there is a link at the bottom that says "More options". This is where you can adjust the re-sharing options. Default is "Everyone the file is shared with can share it with others (at their own role or lower). The other option is "Only let co-authors share this file with others."
After the file has already been shared you can change the sharing options by doing the following:
Select the file in the Acrobat.com organizer (files tab)
Select share file (either in the lower left of the window or select Share Document from the drop down menu)
Click on Change options at the bottom of the menu that slides up from bottom left
Co-authors have the same rights as an author and there is currently not a setting to prevent co-authors from sharing. If they do not need to have the same rights as an author, try changing them to a reviewer or reader and changing the share option to "Only let co-authors share this file with others."
You can find more information about the different roles here.
If I've misunderstood your question, please post again.

My ipod nano (3rd generation) won't sync to my computer anymore. I share the computer with other family members and there ipod's sync fine to their iTunes, but mine won't work. How do I fix it? :)

.

Why won't it sync anymore? Does iTunes still see the device? If so, are you getting any error message during the sync process? Need a bit more detail in order to assist you.
B-rock

MathScript Nugget #19: Sharing Data With Other Applications

In MathScript Nugget #18, we looked at ways to transfer data between MathSript and the rest of LabVIEW. In today's nugget, we'll see some of the different ways that MathScript can share data with programs besides LabVIEW.
The most common way to share data between programs is by reading and writing files. MathScript supports several file formats that are recognized by other programs. The ones we'll touch on in this nugget are MLV, MAT, CSV, TXT, TDM(S) and XLS.
The easiest way to bring data into MathScript is with the 'load' function. The help topic for this function does a great job of explaining it. The load function will bring in a group of variables that have been saved to a file earlier. The most common formats that load supports are:
MLV files created with MathScript save function
MAT files created with version 6.0 or earlier of The MathWorks, Inc. MATLAB® software
TDM and TDMS binary measurement files created in LabVIEW or DIAdem
The load and save functions are great for storing off a group of variables to be used again in a future session of MathScript. You can do the same thing using the Operate>>Load Data... and Operate>>Save Data... menu items in the MathScript Window. These support the same file formats as load and save.
The best formats to use if you want to share data with other applications are TXT, CSV, and XLS. MathScript has special funcitons to read and write each of these formats. The functions, such as fread_csv and fwrite_xls, are all members of the support class.
The last way to read and write data files with MathScript is to use a custom file format. MathScript supports common file operations like fread and fwrite. You can use these functions to create or import files of any binary or textual format.
There's one last way to move data out of MathScript without using files. You can copy data from the MathScript Window or MathScript Probe as tab-delimited text to your OS clipboard. You can then paste this text to a text editor or spreadsheet program.
Hopefully now you have an idea of the many ways to move data into and out of MathScript.
MATLAB® is a registered trademark of The MathWorks, Inc.
jattas
LabVIEW MathScript R&D
ps Check out more MathScript Nuggets!

TDM and TDMS are also excellent file formats to share your data with other applications. National Instrumenst offers free libraries and add-ins to access TDM and TDMS files with e.g. Excel, OpenOffice Calc or The MathWorks, Inc. MATLAB® software. Have a look at this page to
Find Resources for Reading and Writing TDMS Files in Third-Party Products

How can I save my fillable form so that when I share my form with other people they are able to save the fillable version of the form?

I made a fillable form in Adobe Live Cycle - The problem I'm having is that when I share the form with someone they are unable to save the fillable version of the form once information has been put in - I need them to be able to save the fillable form so that when we need to make changes in the future that we don't need to fill out the entire form again.

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session.
You can use "Firefox > History > Restore Previous Session" to get the previous session.<br />
There is also a "Restore Previous Session" button on the default <b>about:home</b> Home page.
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

After updating my Iphone 4 on iOS7, my microphone stopped working when someone is calling me(or when I call someone). But the mic works with other applications like Skype... Any ideas ? Thanks.

After updating my Iphone 4 on iOS7, my microphone stopped working when someone is calling me(or when I call someone). But the mic works with other applications like Skype...
Any ideas ? Thanks.

Hi Anis289,
Welcome to the Support Communities!
As a first step, I would suggest restarting and/or resetting the iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Here are some additional troubleshooting steps for sound on your iPhone:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Cheers,
- Judy

I want to share PDF documents with others. These documents have been edited (mostly highlights) by me. I want to share these documents without the changes I've made. How can I do this?

I want to share PDF documents with others. These documents have been edited (mostly highlights) by me using Preview. I want to share these documents without the changes I've made. How can I do this? Do I have to manually erase all of the changes I've made. The people I want to share it with also have macs.
Isaac

You can move the iTunes folder to a separate drive on your pc an then configure each account to use this drive / folder as iTunes library ... The problem is, that iTunes by default stores everything in your personal music folder which is separate for each user account in windows (and by default is on "C" drive).
I create a separate partition on every pc/laptop (and map a drive name) where I store music, videos and other mass data. This will also keep the "C" drive small, which is backed up from time to time and so my backup is also small.

Could not retrieve the document with the passed obsolete token.

Hi,
Issue is with the specific report not able to execute when the query is cancelled and getting an error when you are cancelling an already executing query.
Receiving an error message during running one of our report in the
following way:
- Run the Webi report
- Select the value for 8 prompts
- Click on cancel
- try to re-run by clicking on re-fresh and receive an error message.
The error message is the following:
"Could not retrieve the document with the passed obsolete token (Error: RWI 00323) (Error: INF)"
Till now we have made the following changes:
This might be caused by a storage token that identifies a document state, which is no longer available in the storage tokens stack.
In the webi.properties file, increased the value of storage tokens stack size.
1. Edit the webi.properties file found in the following location:
u2022 <Installed dir>\program files\businessobjects\BOenterprise115\Web services\en\dsws_webservice_boe\data\asemble\dsewsBobjJava\src\WEB-INF\classes\webi.properties.
2. Add or change the following variables:
u2022 WID_FAILOVER_SIZE (This sets the maximum number of tokens to keep in memory. It is 10 by default.)
u2022 WID_STORAGE_TOKEN_STACK_SIZE (this sets the maximum number of tokens stored on disk. It is 10 by default.)
u2022 Deleted cookies.
u2022 Add the Java Runtime Parameter value from following path:
Start - > Control Panel-> Java -> Java Applet Runtime Settings
Click on View.
Add the Java runtime Parameter value: Xmx200.
It is not a machine specific issue however it is intermittent.
Please advice.
Regards,
Pradnya Kokil

Hi Pradnya,
Following solutions might help you to resolve the issue.
Solution1:
To achieve optimum performance, the developer should limit the number of new windows that can be opened using the OpenDocument function, particularly if using it within the drill function.
If you must open a new window each time, you can increase the number of document instances available on the system by modifying parameters in the webi.properties file:
1. On the Business Objects server, navigate to the following directory:
C:\Program Files\Business Objects\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\WEB-INF\classes
2. Open the webi.properties file using a text editor.
3. Uncomment the FAILOVER_SIZE=10 line by removing the # from the beginning of the line.
4. After FAILOVER_SIZE, add the following:
STORAGE_TOKEN_STACK_SIZE=40
5. Save the file.
6. Restart the application server
Solution2:
Do not use Control Key + N or File New from Browser for invoking new instance of Browser
Avoid opening Infoview by Hyperlinks.
Alternatively, by setting logontoken.enabled property in web.xml for desktop.war, will stop users allowing using old token
Locate web.xml file in desktop.war file deployed on your application server
Locate the following string in web.xml:<param-name>logontoken.enabled</param-name>
Change the <param-value> for logontoken.enabled from true to false (forexample, <param-value>false</param-value>)
Save and close the file
Restart the web application server to apply the changes
Regards,
Sarbhjeet Kaur

Could not start the hyperion workspace-web application Error 1067

Hi,
I have installed hyperion from scratch in a distributed environment...everything was working fine.......i.e. shared services, workspace, essbase, sql server, and hfm. I was able to logon and navigate different options in the hyperion products...but essbase stopped working when I re-started all four servers ....?
(1) When I restarted all four servers and stopped and restarted all hyperion services as per giving sequence then everything works fine but essbase EAS console and workspace web console...i was getting error message " could not connect to administration server" whenever i try to connect EAS console to essbase then I went to services there I saw workspace agent and workspace web application service is down.
(2) as soon as I started those both services then my shared services automatically stopped but I was able to logon in Essbase console and workspace console but my shared services are down...
(3) as soon as I start shared service they started but my workspace agent and workspace web application automatically stopped...and when I try to start again workspace web application then I get this error "[ Could not start the hyperion workspace-web application services on local computer. Error 1067: the process terminated unexpectedly]"
I have been searching online and googling but have a hard luck to get some best solution for this...can some one help me or guide me to walk through with this issue...
Thank you very much in advance ...
Regards,
Safi

I solved this issue...It was with Hyperion Services those were stop responding some how.....but I stopped each service and restarted then those started working again...
Regards,
Safi

If I'm connected in wifi with my Macbook, can I share the internet with Iphone? Thanks

If I'm connected in wifi with my Macbook, can I share the internet with Iphone? Thanks

If you are asking about the Internet Sharing feature on the Mac, the answer would be that this option is not available for normal wireless, but it might work for BlueTooth. Might be worth a try that way.
However, if the Mac had an Ethernet Internet connection, then you could create your own "private" wireless network to allow wireless devices to connect.

The Fibre Channel Platform Registration Service could not register the platform with fabric

Hyper-V Cluster. HP StorageWorks 82E 8 Gb PCI-e Dual Port FC HBA.
Each 15 minutes, eventlog register a warning.
EventID: 2 Source:2
The Fibre Channel Platform Registration Service could not register the platform with fabric 10:00:00:05:1e:7f:74:7b.
I have teste the service. And it's started. Cluster storage validation report without failure.
Someone suggest any idea.
Thanks.

Hi,
What’s the OS version of your cluster node?
The Microsoft Fibre Channel Platform Registration Service registers the platform with all available Fibre Channel fabrics and maintains the registrations. A fabric is a network topology where devices are connected to each other
through one or more high-efficiency data paths. This service is used in support of storage area networks.
This service is installed by default on Windows Server 2008, and the service startup type is Manual.
You may try hotfix in KB 978790, and check the result.
For more information please refer to following MS articles:
The File Share Witness resource is in a failed state even though the File Share Witness directory is available, and quorum cannot be maintained in a Windows Server 2008 failover cluster
http://support.microsoft.com/kb/978790
cluster resources unresponsive
http://social.technet.microsoft.com/Forums/hu/winserverClustering/thread/886a9cb3-7723-4b64-8c15-602dadf5ced9
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

"Could not locate the bean with the ejb-name XYZ in weblogic-ejb-jar.xml

Hi,
Please someone help me on this...
I'm trying to deploy an application on WLS 8.1 SP4
on HPUX IA64 arch. From the ear file WLS is able to
deploy 3 jars but for the last two jars it's throwing
the below error:
Could not locate the bean with the ejb-name xyz in weblogic-ejb-jar.xml
But ejb with name xyz is defined in the the weblogic-ejb-jar.xml file and it's also present in the
META-INF/ejb-jar.xml file.
I have no clue what's going wrong.
Any help is appreciated.
Thanks
Mouli

oops! Pls ignore my previous mail. It was for a different problem.
FOr the original problem of "couldn ot locate the bean with the ejb-name XZY in weblogic-ejb-jar.xml":
This happens if you don't have the below files defined
for a JAR/EAR file:
weblogic-ejb-jar.xml and weblogic-cmp-rdbms-jar.xml (needed if you have any Datasource mapped)
These two are basic files required for any JAR/EAR file.
If you dont' have it already you can generate them using
$WLS_HOME/bin/startWLBuilder.sh GUI tool bundled along
with WLS (I used 8.1 SP4) to generate these files ! This tool is really helpful.
- Mouli

How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone

How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone. For 6months I had set up a network that shared the internet through bluetooth to my iPod 5th gen but i messed it up when i tried to add my iPhone 5s and i can't remember how to do it.

The following has instructions: OS X Mavericks: Share your Internet connection

Could JMF share the webcam with other applications?

Similar Messages

Maybe you are looking for