Could not connect to ESS when using vpn or remote connection to network.

Hi,
Our users could not connect directly to ESS when they are using vpn or dial-up. The ESS link would ask for user id and password. There is no problem when they are directly connected to the office network. The ESS page will display directly when they click on it. It will not ask for user id and password. We are using Single Sign-On.
thanks,
krbas

I have solved the problem.
The problem was solved by including the url of our server in the exception list of the IE proxy settings of VPN.
Thanks to me. :-D
Now.... How can I assign points to myself?

Similar Messages

"Could not complete scan" error when using Windows Fax and Scan

"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
Motorbike

You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Probem connecting a server when using VPN

Hi,
I am new to Linux. I installed a new Oracle Linux server and was able to connect to it from my laptop using putty when I am inside my office. I have static IP on the linux server and everything seems to work fine when I am in the office.
However, when I work from home using VPN, I am having problem connecting to the Linux server using putty. I got timed out.
How do I troubleshoot this issue?

Eski wrote:
I don't have any firewall on the server
So you think the only place for a firewall is on your server?
see this:
[root@poc2 network-scripts]# service iptables status
Firewall is stopped.
It's not a firewall issue. I beg to differ. You are going through a network that has multiple firewalls. You probably have a home router, and that probably has a firewall implementation. Your ISP most certainly has multiple firewalls, as does your company system at the other end of the VPN.
Where can I check next? (I don't have a network admin support. This is my POC proof-of-concept project.)If you are using a VPN, then you have a network admin somewhere at the other end of that VPN and it appears he/she is in your own company. What prevents you from talking to him? Certainly it's not because you are trying to secretly circumvent your company's security to do your POC project?
Edited by: EdStevens on May 18, 2013 3:33 PM

Could not resolve memory leak when using QuadArray BY_REFERENCE

Hi,
While working on my project I have to create large mesh (grid). To do it I am using QuadArray and using BY_REFERENCE mode.
After I close the module, the float array that is used as the coordinates array for above QuadArray geometry, is not freed. And if I open same module it takes additional same amount of memory. If I open that module for 3-4 times, memory goes piling up and causing OutOfMemoryError.
Even I have nullified the coordinate array explicitly on closing the module, the problem could not be resolved.
Can any body please help and give me some points where the problem may be rooted.
Regards,

I found the solution
if I set the coordinate array to null memory frees up.
The code line look like
g.setCoordRefFloat(null);Probably reference kept by geometry was not being freed.
cheers!

Not connected to internet when using vpn

Hi all - new to MACs and having a couple of problems ...... when I connect to internet using built in ethernet no problems .. when i connect with vpn(pptp) I gt te message connected to server but when i open safari and ty to connect to webpages i get the message that i am not connected to the internet - any help would be appreciated
Pete

on the internet configuration for your vpn connection goto the menu bar and choose connect menu then from the drop down choose 'options' and uncheck 'send all traffic over VPN connection'

Why not pop IE when using VPN

I use VPN to link a server machine in the OAF(JDeveloper 10).
But I run the HelloWorldPG.xml, +there are no IE page to pop to display.
And then throw a error message (connection timed out) in the consoles.
In the meantime, I have set "Specify Host Name" to VPN IP in the Embedded OC4J Server Perferences.
What's the reason, and how to solute it, Ths.
Edited by: Sumury on May 27, 2013 2:33 PM

Hi,
Sometimes the connection is very slow over VPN and hence connection times our before the Page is launched. Following are some of the options which could be explored:
* If the myclass file is already there, system would not recompile all the data and go directly to OC4J server initialization. At times this is enough.
* If step 1 is not enough, you can try logging into a system where the VPN is fast (through remote login) and then run the program there.
* This option is to find another instance in your local network and deploy the finalzied code in the final environment.
Regards
Sumit

I list books on Amazon when on IE my condition notes were always saved & I could pick any one but when using firefox they not saved how can I fix this?

I list books on Amazon when on IE my condition notes were always saved & I could pick any one but when using firefox they not saved how can I fix this?

Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Make sure that you aren't blocking cookies.
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

"The attempted operation failed. An object could not be found" error when double clicking on an ics file

Operation System: Windows 8 Pro
System Type: 64-bit Operating System
Office: MS Office Professional Plus 2013
I am getting "The attempted operation failed. An object could not be found" error when I double click on an .ics file to an appointment to my calender. My outlook.com account's data file is set as default and this error only occurs if
that is the default data file. I thought that maybe my profile is corrupted. So, I opened up a new profile with the below steps and only add my outlook.com account there:
1-) Open up the Control Panel and go to Mail section
2-) Click "Show Profiles"
3-) Click "Add" and give a name to your profile.
4-) Configure your outlook.com account (with Auto Account setup, not manual steps)
5-) Finally, set that profile to be used always.
Then, I opened up the Outlook 2013 and clicked on the .ics file to add that appointment but got the same error.
Is this a known issue or specific to me?
Thanks!

yes, I have the same problem.
The workaround of saving the ICS file and then importing it into the current calendar
works,
but the ICS calendar
displays in other section, NOT in the section of my old events.
why ??

Last night, I plugged in my nano to sync and could not pull up the summary page. It will connect and charge, but will not pop up as a "device" in left column. I can't sync. how can I fix this?

Last night I tried to sync my IPOD nano, and could not pull up the summary page. It would connect and charge the IPOD, but did not pop up as a "device" in the left column, so I could not click it and get to summary page and sync new music. Same laptop for a year, same IPOD, synced 3 days ago with no problem. Now all of a sudden, I can't sync. No message or other window pops up to tell me if something is wrong. How can I fix this?

Please authorize ADE 3 with same credentials that you used with older version of ADE

HT2188 I can hear caller but they can not hear me except when using speaker phone

I can hear caller but they can not hear me except when using speaker phone

First of all, make sure that your iPhone as the most recent iOS available. Check in "Settings>General>Software Update".
One other problem could be your microphone. Does it work for anything else other than a call?
Good-Luck!
kpower28
Please mark this as "solved my problem" or "helped me"!

Getting error message "Could not create work area" when I open Bridge CC.

I am getting an error message "Could not create work area" when I open Bridge CC.
I have reset my workspace. I have closed and opened Bridge CC. I have deleted the !!-$$$AdobeOutputModule.workspace file in /Library/Application Support/Adobe/Bridge CC/Workspaces folder.
I am not an expert computer user, so please explain in detailed steps like I am 5 years old. Thanks in advance for any help.

I am experiencing the same problem!
My mac is OS X Yosemite (10.10.1), Photoshop CC 2014.2.1, Bridge CC 6.1.0.115 and Camera Raw 8.7.0.309

I TUNE IN MY MAC MINI COULD NOT BE OPENED. WHEN I CLICK THE I TUNES ON THE DOCK, I GET A PROPMT SAYING THE, "THIS COPY OF ITUNES IS CORRUPTED OR NOT INSTALLED CORRECTLY. PLEASE RE-INSTALL ITUNES. -42037. WHAT I SHOULD DO PLEASE?

I TUNE IN MY MAC MINI COULD NOT BE OPENED. WHEN I CLICK THE I TUNES ON THE DOCK, I GET A PROPMT SAYING THE, "THIS COPY OF ITUNES IS CORRUPTED OR NOT INSTALLED CORRECTLY. PLEASE RE-INSTALL ITUNES. -42037. WHAT I SHOULD DO PLEASE? wasantharama

If I were you, I would reinstall itunes. BACKUP ALL YOUR ITUNES MEDIA TO AN EXTERNAL STORAGE DEVICE BEFORE DOING THIS PLEASE.

HT1473 iTunes message saying the song names for this cd could not be found online when it's iTunes store, What's up with that?

I just purchased The Very Best Of Eagles CD, Popped it into my drive so excited to own the copy but when I tired to copy it to my Library I get this message saying the song names for this cd could not be found online when it's in the iTunes store, What's up with that? Is there any way to get track information and artwork without Having to manually inter all the info?

iTunes gets track information from Gracenote's database, so iTunes must be able to reach gracenote.com and the CD must have been entered there by some purchaser already (all CD information in Gracenote is provided by we users). If these are common, commercially-distributed CDs, it may be that there is a firewall or privacy filter blocking access to gracenote.com. If these are unusual, independently-released or rare CDs, they just may not be in Gracenote yet. In the case of a custom CD where it's a compilation, Gracenote probably won't be able to identify them (it goes by complete albums, comparing the number and length of the tracks to try and figure out what album it is).
Hope this helps.

Why does the sync button not work in itunes when my ipod touch is connected

why does the sync button not work in itunes when my ipod touch is connected?

It's working for me in Acrobat XI:
I'd try logging into Acrobat.com from your browser, and log in with your Adobe ID. There may be a problem there:
workspaces.acrobat.com

Could not connect to ESS when using vpn or remote connection to network.

Similar Messages

Maybe you are looking for