Could not delete service error

When I start iTunes, it brings up a first message, saying 'The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?', with the options 'Yes' or 'No', I choose Yes as I need to use my iPod Touch and a second message, saying 'Could not delete service'. This issue is only since updating to iTunes 10.5.1 (specifically 10.5.1.42). I use an addon called TuneUp (www.tuneupmedia.com).

Same here with many past versions and the most recent one.
I always have to uninstall everything completely, restart and then install iTunes from scratch.

Similar Messages

Could not delete service

During install I receive the message "Could not delete service". What does it mean and how should I handle this predicament?
Attachments:
Capture.PNG ‏75 KB

Do you have any earlier version of the Nokia Suite installed ? If so, un-install that and then try re-installing the New verion.
You may also try the latest Beta version from HERE ...To download the installer, you need to log-in using the SAME credentials that you use on this Forum.
BTW, not sure what the message means ...

"A technical error during invocation : Could not invoke service reference" Error message while calling a service from BPM

Hi Experts,
We are facing a issue while calling a Automated activity from BPM process, the process gets suspended and the BPM logs says "Process XYZ suspended, A technical error during invocation: Could not invoke service reference name fdhueoegghejietyhsjk6886 Component name ABC " We have already checked the mapped service reference and provider system. Gone through the below link, but no help.
http://http://wiki.scn.sap.com/wiki/display/TechTSG/Sending+a+message+from+SAP+NetWeaver+BPM+process+to+PI+fails+via+automated+activity?original_fqdn=wiki.sdn.sap.com
Any pointers or suggestions to fix up this issue will be highly appreciated. Thanks in advance.
Regards,
Mohit Jaju

The details/ID in NWDS Service Reference must exactly match the SOA configuration. Sometimes it's possible you have changed the reference or the group itself and something changed to become mismatched.
It's possible they don't match - but the SG itself will show green in NWA since the service exists and responds on the target system. Does the ID listed in the error match what is shown in the NWDS project?
regards, Nick

Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]

I'm using Oracle Linux 6u6. While I'm installing openstack ( 2 node set up) using packstack, I'm getting this error:
Applying 10.245.33.37_cinder.pp
10.245.33.37_keystone.pp:                         [ ERROR ]
Applying Puppet manifests                         [ ERROR ]
ERROR : Error appeared during Puppet run: 10.245.33.37_keystone.pp
Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
You will find full trace in log /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
Please check log file /var/tmp/packstack/20150327-100335-ltC8Ic/openstack-setup.log for more information
Additional information:
* A new answerfile was created in: /root/packstack-answers-20150327-100336.txt
* Time synchronization installation was skipped. Please note that unsynchronized time on server instances might be problem for some OpenStack components.
* Did not create a cinder volume group, one already existed
* File /root/keystonerc_admin has been created on OpenStack client host 10.245.33.37. To use the command line tools you need to source the file.
* To access the OpenStack Dashboard browse to http://10.245.33.37/dashboard .
Please, find your login credentials stored in the keystonerc_admin in your home directory.
Packages:
[root@slcai461 ~]# rpm -qa|grep keystone
python-keystoneclient-0.9.0-5.el6.noarch
python-keystone-2014.1.3-2.el6.noarch
openstack-keystone-2014.1.3-2.el6.noarch
[root@slcai461 ~]# rpm -qa|grep packstack
openstack-packstack-puppet-2014.1.1-0.12.dev1068.0.4.el6.noarch
openstack-packstack-2014.1.1-0.12.dev1068.0.4.el6.noarch
Log :
[root@slcai461 ~]# cat /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
Warning: Config file /etc/puppet/hiera.yaml not found, using Hiera defaults
Warning: Scope(Class[Keystone]): The sql_connection parameter is deprecated, use database_connection instead.
Warning: Scope(Class[Keystone]): token_format parameter is deprecated. Use token_provider instead.
Warning: Scope(Class[Keystone::Endpoint]): The public_address parameter is deprecated, use public_url instead.
Warning: Scope(Class[Keystone::Endpoint]): The internal_address parameter is deprecated, use internal_url instead.
Warning: Scope(Class[Keystone::Endpoint]): The admin_address parameter is deprecated, use admin_url instead.
Warning: Scope(Class[Nova::Keystone::Auth]): The cinder parameter is deprecated and has no effect.
Notice: Compiled catalog for slcai461.us.oracle.com in environment production in 1.60 seconds
Warning: The package type's allow_virtual parameter will be changing its default value from false to true in a future release. If you do not want to allow virtual packages, please explicitly set allow_virtual to false.
   (at /usr/lib/ruby/site_ruby/1.8/puppet/type.rb:816:in `set_default')
Notice: /Stage[main]/Keystone/Keystone_config[DEFAULT/admin_token]/value: value changed '[old secret redacted]' to '[new secret redacted]'
Notice: /Stage[main]/Keystone/Keystone_config[database/connection]/value: value changed '[old secret redacted]' to '[new secret redacted]'
Notice: /Stage[main]/Keystone::Db::Sync/Exec[keystone-manage db_sync]: Triggered 'refresh' from 3 events
Notice: /Stage[main]/Keystone/Exec[keystone-manage pki_setup]: Triggered 'refresh' from 2 events
Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Wrapped exception:
Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Error: /Stage[main]/Keystone::Service/Service[keystone]/ensure: change from stopped to running failed: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Notice: /Stage[main]/Keystone::Service/Service[keystone]: Triggered 'refresh' from 5 events
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Skipping because of failed dependencies
Error: Could not prefetch keystone_endpoint provider 'keystone': Execution of '/usr/bin/keystone --os-endpoint http://127.0.0.1:35357/v2.0/ endpoint-list' returned 1: An unexpected error prevented the server from fulfilling your request. (HTTP 500)
Notice: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Skipping because of failed dependencies
Notice: /Stage[main]/Main/Keystone_service[cinder_v2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Main/Keystone_service[cinder_v2]: Skipping because of failed dependencies
Notice: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Skipping because of failed dependencies
Notice: Finished catalog run in 3.10 seconds
Please let me know how to fix this.

This problem connected with proxy-setings.
As the first steps you should try:
       1. export system env variable:
http_proxy=http://www-proxy.ru.oracle.com:80
https_proxy=https://www-proxy.ru.oracle.com:80
no_proxy=127.0.0.1,localhost
and you can also export
    export OS_TENANT_NAME=admin
    export OS_USERNAME=admin
    export OS_PASSWORD=root
    export OS_AUTH_URL=http://<conntroller_IP>:5000/v2.0/
2. and than restart mysqld, if it is running, stop iptables and repeat installation process from beginning with the currently generated answer file
if we are exporting variable OS_PASSWORD, its value should be the same as value for CONFIG_KEYSTONE_ADMIN_PW in the currently generated answer file.
This OS_PASSWORD will be written by packstack in the /root/keystonerc_admin file and will be used as admin's password for login to Openstack dashboard.

Time Machine Backup Error. Time machine could not delete the backup disk image .sparsebundle

Time Machine is giving an error message. Time Machine couldnt complete the backup. I am using the Seagate GoFlex Home. Error message states Time Machine could not delete the backup disk image "/volumes/Go Flex Home Backup/iMAc.sparsebundle". Does anybody have any ideas?

I have deleted all files in the Time Machine backup via Windows, Finder, and GoFlex UI.
I think this is your problem.. you need to follow the exact setup from seagate to get TM running again.. please read the manual... I do not have one but I do have another brand of NAS and setting up TM involves a fairly complex set of instructions.. because it is not a native Apple device.. your computer does not recognise it as TM capable.. you need to use the work around the manual will explain.

Deleting Duplicates creates "original file could not be found" error

I am not running iTunes 8.2.1.6 and trying to delete duplicates that were created as I tried to move my iTunes Library to other drives. Now I have many duplicates - sometimes 3-4 of the same song. If I delete them I begin to get "original file could not be found" error when trying to play the one version I kept.
Is there some magic to which one I should keep?

iTunes doesn't help you distinguish between duplicates that are two identical copies of the same file or two separate references to the one original file. If the later is the case and you delete any reference allowing the source file to be deleted then ALL other references to the file become invalid. You can either check the properties of each file before deleting and choose whether to keep or delete accordingly or use itunesremoveduplicates from Teridon's iTunes Scripts.
tt2

ORA-12154 TNS could not resolve service name error

Hi
I'm having trouble connecting to database throug sql*plus.I'm able to connect through TOAD but getting 'ORA-12154 TNS could not resolve service name error' when trying to login through sql*plus using same credentials .
I tried running sqlplus through command prompt,but when i enter the user-name i'm getting ORA-12203:TNS:unable to connect to destination.
Can someone help me with this error.
Thanks.

It would probably give you an idea where to start looking. You need to make sure that you have the correct .ora files needed for establishing connections. I don't know if your service desk just does the installation but no setup or if they also do the setup configuration. You can also try doing the setup on your own to check. You can use net easy config.

Error: "The workflow could not delete the list item"

Have set up 2 lists: Events and EventsArchive. They have all the same fields. I have created a workflow in SPD using an impersonation step (I have Full control of the site/site collection). Workflow is essentially this:
    If Curent Item:Expired
equals
Yes
       Copy item in Current Item to
EventsArchive
       then Delete item in
Current Item.
The item is copying over to the EventsArchive list just fine, but the "delete" part is not happening. Instead, I get the following error:
The workflow could not delete the list item. Make sure the list exists and the user has permissions to delete items in the list.
The list obviously exists (or I wouldn't be able to copy an item from it), and I have as much permissions as anyone can have, so I'm not sure where else to turn with this.
Thanks in advance for your help!

Hi,
To test the issue, I create a simple workflow without using Impersonation step:
It works.
Could you please create new lists to avoid custom settings and test the issue again?
Similar thread:
https://social.msdn.microsoft.com/Forums/office/en-US/3fa94026-4487-4e4c-a5b4-12a79d6ee6a2/workflow-delete-item-not-working?forum=sharepointcustomizationprevious
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

J2EE Server could not be started - Error -11113

HI,
     J2EE Server could not be started - Error -11113.
       My system configuration:
      Solution Manager 7.0
      Windows server 2003 32-bit
      ABAP Stack is working fine.
     1.After SGEN in client 001 all the users like J2EE_ADMIN,J2EE_Guest,Slddsuser,SAPJSF etc were deleted.
     2.I have manually create all the users and assigned the respective roles.
     3.Even now i face a same problem as JAVA Server (Server0) dies while starting framework.
Please find the specific problem in the log of DEV_SERVER0
[Thr 7968] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 7968] JLaunchRequestQueueInit: create pipe listener thread
[Thr 8104] JLaunchRequestFunc: Thread 8104 started as listener thread for np messages.
[Thr 6456] WaitSyncSemThread: Thread 6456 started as semaphore monitor thread.
[Thr 7968] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 7968] CPIC (version=700.2009.02.11)
[Thr 7968] [Node: server0] java home is set by profile parameter
     Java Home: C:\j2sdk1.4.2_13
[Thr 7968] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\SM2\DVEBMGS70\exe\jvmx.jar
[Thr 5636] Wed May 18 08:45:59 2011
[Thr 5636] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 5636] Wed May 18 08:46:00 2011
[Thr 5636] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 5636] JLaunchISetClusterId: set cluster id 701470150
[Thr 5636] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 5636] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 6748] Wed May 18 08:46:30 2011
[Thr 6748] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 6748] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 6748] JLaunchCloseProgram: good bye (exitcode = -11113)
This below log files belong to server0.log
     at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:194)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:156)
Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
     at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:80)
     at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.update(LoginModuleHelperImpl.java:415)
     at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.<init>(LoginModuleHelperImpl.java:84)
     at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:58)
     at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:147)
     ... 5 more
#1.5 #000BCDCBCF4F001F0000000C00001AA80004A38454DADAA1#1305688661484#/System/Server##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_31##0#0#Error#1#/System/Server#Plain###Core service security failed. J2EE Engine cannot be started.#
#1.5 #000BCDCBCF4F001F0000000E00001AA80004A38454DADE18#1305688661484#/System/Server/Critical##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_31##0#0#Fatal#1#com.sap.engine.core.Framework#Plain###Critical shutdown was invoked. Reason is: Core service security failed. J2EE Engine cannot be started.#
Kindly help me in this issue and do let me know if any informations are needed.
Regards
Gopinath M.L

Hi,
Which UME user you are talking about i checked in config tool where there is no user in UME.
Kindly advice how to create a UME User if not available to start the server.
Note: Http://servername;57000/ is says that dispatcher working but not connect to JAVA Server.
Regards
Gopinath M.L

To recipient Unknown could not be delivered [Error:80040919]

To All
I have unity 7.0 (2) running and the problem is that no voice mail is been received id mailbox.
In the event loggin I see the following:
Event Type:    Error
Event Source:    CiscoUnity_UMR
Event Category:    UMR Thread Error
Event ID:    113
Date:        6/14/2013
Time:        3:42:01 PM
User:        N/A
Computer:    VIPNLAP501
Description:
A message with the subject:
<Unknown>
to recipient <Unknown> could not be delivered [Error:80040919]. It was moved to the failed directory. This can occur for several reasons: the recipient mailbox may be disabled or inaccessible, Cisco Unity may be having trouble connecting with the partner server, or the Cisco Unity messaging component may not be properly configured. If this condition persists, contact Cisco TAC. 0x00000C94
And what I see is also that the is no sync on ldap, this last I have seen this bevore and solf the the problem but now I can not see where it is going wrong.
It is no unity connect.
Please help,
Thanks
Regards,
Jan Meeling

Hello Jan,
The PW (Permission Wizard) is found on the Tools Depot> Administration Tools> Permision Wizard. If you right click on it and select properties you will be able to see the version. If you do not have the latest vesion (v. 3.0.0.7) you should start by installing it.
Go to:
http://ciscounitytools.com/SiteList/AllDownloads/alldownloads.html
Under Title search for:
Permissions Wizard 5.0(1)+
Running the Permission Wizard is required with a Domain Admin account, usually the Unity Install account has this included, to verify, go to Start> Run> dsa.msc> Click on Find> Type Unity Install> Click on Member of tab.
Additionaly this utility does not involve any downtime to your environment. At the beginning of the Wizard confirm that the proper accounts are assigned to the services, i.e: Directory Services-> UnityDirSvc, for Message Store-> UnityMsgStore. When yo reach the point to select the Mail Stores make sure that all the proper or desired mailstores are included.
At the end if it fails for 1 item, and it is permissions to delete objects this can be expected.
To fully understand this tool and see screen shots of running the tool go to:
http://ciscounitytools.com/Applications/Unity/PermissionsWizard/Unity50/Help/PWHelp_ENU.htm
The MSCW (Message Store Configuration Wizard) is a tool used to partner and synchronize with your Exchange server and is found in Start>Control Panel> Programs> Add Remove Programs> Doble click on Message Store Configuration Wizard. Running this tool is service impacting, meaning it requires to stop Unity services.
At the end of the Wizard you are prompted for a last account, which is the Directory Service account, make sure you are using the proper one, i can't stress this enough.
It would also be good to ensure that your Unity System is able to communicate accordingly to your Domain Controllers and Global Catalog. You can check this by going to Tools Depot> Administration> DCGC Reconnect> Click on the DC tab hit Force Reconnect do the same in the GC tab (this is again NOT service impacting). After you do that go to Event viewer (eventvwr.msc)
One event will be seen with the Domain Controller:
The Cisco Unity service that monitors Active Directory (AvDSAD) completed a full
synchronization cycle with
Another will be seen with the Global Catalog:
...event global catalog (AvDSGlobalCatalog) completed a full synchronization cycle with ...
If you do not see a complete synchronization there might be issues in your network or to the DC GC's Unity is talking to and therefore not able to retrieve the proper information of the users.
If you run DBWalker does it give you any further insight?
It would be usefull if you could clarify whether this issue is
-for all users: mayor changes on either Unity or Exchange
-a set of users:random or specific to a mailstore
-single user: are there any differences in Exchange between the working users and the non-working one; is it disabled on AD?
Best regards,
David Noel Rojas Peck
Email: [email protected]
Mon, Wed, and Fri 12:00 pm to 9:00 pm ET, Tue and Thu 8:00 am to 5:00pm ET
Cisco Worldwide Contact link is below for further reference.
http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html

Could not delete from specified table?

hi all,
i'm getting this error could not delete from specified table when i execute a delete on dbf file via JDBC-ODBC bridge, when i execute an update table command i get operation must use an updatable query, but i'm not updating the query returned from select statement.
Does anyone have similar problem before??

Hi,
my code is below:
try {
conn=DriverManager.getConnectio("jdbc:odbc:sui","","");
stmt = conn.createStatement();
int r= stmt.executeUpdate("Update Alarms set ACK=True WHERE DT = { d '" + msgdate + "' } AND TM= '" + msgtime + "'");
System.out.println(r+" records updated in Alarms ");
stmt.close();
conn.close();
stmt=null;
conn=null;
catch (NullPointerException e) {System.out.println(e.getMessage());}
catch (SQLException e) {System.out.println(e.getMessage());}
I have an ODBC datasource called sui and a table called alarms, i need to write into the column Ack to true when DT equals msgdate and TM equals msgtime, the error returned is Operation must use an updatable query.
I believe the SQL has no problem because there is no SQL syntax error and i'm not updating any resultset returned from select query.
When i delete, i get could not delete from specified table. Anyone has any idea wh'at's wrong?

The Favorite Content Portlet could not be populated.Error Message

Hi all,
I am new in PORTAL, I made an Instant portlet which was working fine. But then started an error occuring when I view the Portal Page: "The Favorite Content Portlet could not be populated.Error Message." This error is show in a dialog box when ever I view page or navigate to other tabs(subpages) of portal.
When I diagnose I got that this error is in "Main Navigator". If I delete the Main Navigator from Portal this error does not occur. But without Navigator subpages(tabs) cannot be visible.
This is the case when I make new INSTANT PORTAL. Please Help urgent!!!!!!!!!!!!
Thanks,
Fahim

I strongly recommend upgrading to the 3.0.9 release (iAS
1.0.2.2) with the 3.0.9.8.2 patch (this patch should be
available for NT/2000 this week). Also, the database should be
running 8.1.7.1 (or later), as explained in the iAS release
notes.
Regards,
Jerry

ITunes cannot sync apps to the iPod because the apps installed on the iPod could not be determined error message

I've been getting the "iTunes cannot sync apps to the iPod because the apps installed on the iPod could not be determined" error message for a while. I have tried restoring my iPod but as soon as I try to sync it again (even with nothing changing in iTunes or on the iPod) I get the same error message. Whenever I want to add music to my iPod I have to delete everything and then wait hours for it to restore which is ridiculous. Anyone have any other suggestions for fixing this problem?
I'm using a 3rd generation iPod touch with 4.2.1 software and iTunes 10.5.3.3

The fact that there is so many discussions with no clear answer is the problem.
I went back and looked through all the different suggestions and and tried them all to make sure I didn't miss anything. What finally worked for me was making sure all apps were updated on the iPod and making sure all apps were updates in iTunes (under the Library>Apps tab NOT under devices) and then syncing.

Even after resets get "The backup disk image "/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle" could not be created (error 22)."

HELP! "The backup disk image “/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle” could not be created (error 22)."
TC estimates over 750GB for full backup.
Late 2010 MBA is connected wirelessly to
802.11n (1st gen) TC that is connected via ethernet hub built into house to motorola router using charter.com for internet.
I have had same problem for over 150 days and multiple reboots, restarts in proper order, firmware updates, unplugs with 5min plus gaps, bypassing the tc and using external 500gb WD mybook via usb to time capsule, replacement of the WD mybook to new 2TB Free Agent GoFlex drive, etc, etc, etc! Note: I originally named my MBA hard drive MacBeth, but at some point months ago, it said backup already existed and system automatically created MacBeth (2), worked for a while, then stopped again, despite trying nearly daily.
I gave up and started using Carbon Copy Clone daily for just the 128gb on internal SSD of my late 2011 11" MacBook Air, but need to get past these time capsule errors to back up the external disk! Due to lack of space in MBA, I had long ago transferred both itunes and iphoto and all imovie/fcpx files to a 1tb external disk (WD Passport) that I keep in my bag with MBA. It is partitioned with 150gb for cloning the MBA, and over 750gb for media/itunes/iphoto/etc.
Also, I have endured months of "your hard drive is full" messages and system lockups, applying the solution given to me by genious bar (deleting all aol.com outboxes/recovered messages/spam/trash under library/mail/V2/Mailboxes folders, empty trash, restart....watch recovered hard drive space mysteriously shrink next couple days to zero.....repeat)
Due to lack of space, I had not been able to do javascript and other system updates. Yesterday, I noticed even safari bookmark bar had mysteriously emptied (not disappeared, I can hide and show the space where the bar used to be - it is just blank area with no data except for eyelass-book-topsites icons), so I transferred a few large quicktime movie files recorded with isight camera to the external disk, and freed up 20 gbs for the first time!
This got my hopes up yesterday because after I completed all system/software updates, suddenly the bookmark bar showed up and I was able to start the time capsule backup! It took overnight preparing for backup, but finally started and progressed to 12gb of the 100gb+ needed (i guess the update where it left off months ago for the estimated 750gb for the full backup?), then I put system to sleep and took it with me (thus leaving the wireless time capsule network as I do daily fully expecting it to continue when I returned home in the evening.) But alas, upon return, back to the "Time Machine could not complete backup, The backup disk image ".....sparsebundle" could not be created (error 22)" Ugh! More reboots, unplugs, 5min gaps....still Ugh!
So the problem continues...please help! Here are my settings:
About this mac:
Mac OS X V. 10.7.5
processor 1.6 ghz intel core 2 duo, memory 4 4g 1067 MHz DDR3
software up to date!
Airport Utility:
V 6.2 (620.33)
both internet globe and TC show green dots in graphic, however internet occasionally shows yellow then goes to green, but still gets error 22. Suddenly TC showed explanation mark and says lost connection and asked if I wanted to 'forget', gave same errors, then mysteriously went back to green, but still got error 22!.
Internet:
connection: connected, displays router address, 2 dns server, and domain name: charter.com
Time Capsule:
shows network, ip address, serial number, version 7.6.3, status: (green dot) Setup over WAN,
wireless clients: phones, macbooks (including this MBA), printers, wii
If you need other settings to help me, just ask! I have read a few of the other solutions in forums, but trying not to erase disks, especially since it worked for a minute yesterday!

To step sideways.. why not just use CCC to backup the 750GB of the hard disk to the TC.
You need to understand this is going to be a super slow process and each time you stop it.. it is going to give issues. CCC will at least do a more reliable job of it than TM.
I would also say.. this is going to be tough without ethernet. You need to understand the backup speed over wireless can be 10GB per hour.. that makes 75hrs to backup the disk. The air needs to run non-stop doing that.. without you touching it.
I would get another external drive.. plug that into the MBA and if you really want to use TM.. make a backup one to the other.. but CCC will again do a better job and work faster. It will be much faster than over wireless.
I am trying to think of ways around the issue of just speed.. but plainly you have lots of other issues.. being the simple unreliablity of the TM to identify the TC.
If you want to make this work.. give yourself a weekend.
Load 5.6 utility into the MBA..
http://support.apple.com/kb/DL1482
Take the TC back to 7.5.2 firmware. It is a really old version and latest firmware does it no good at all.
Wipe its hard disk using erase and start over.. give it new names for everything.
So call it TC
Set the wireless to 5ghz and name it TC5ghz
Use WPA2 Personal security. Use a 10 character passkey non dictionary.
At 5ghz you should get 2x the speed as at 2.4ghz but the air will need to be right next to the TC..
(alternatively buy the USB to ethernet cord apple have available.. it is $30 in the apple store and do it over pseudoethernet. http://store.apple.com/au/product/MC704ZM/A/apple-usb-ethernet-adapter That is the wrong store but you get the idea. )
WIth a fully clean system.. now do a full reset of TM.
See A4 http://pondini.org/TM/Troubleshooting.html
Direct the TM to back to the TC.. and make sure the external hard disk is not excluded.
Of course the TC has to be 1TB version to fit that much data.. goes without saying right.
Even over pseudo - ethernet this will take many hours.. and you basically have to leave it to work.. do not touch it.. make sure the MBA cannot sleep though.. turn off sleep.. beforehand.

HT1218 ?My time machine could not complete back up. Says backup disk image"/volumes/data/name's iMac.sparsebundle" could not be accessed error 1??

Time Machine could not complete the backup.
The backup disk image "/Volumes/Data/Name's iMacsparsebundle" could not be accessed (error -1 )

I checked the pondini fixes and ended up doing the following - in case this could help someone else with OSX Lion and Time Capsule... http://pondini.org/TM/Troubleshooting.html
First, I downloaded and used Airport Utility 5.6 instead of 6.1 - BTW, I had to attempt download and installation THREE times before the program actually installed. Be persistant.
Pondini #5: It's possible some names (of all things!) may be a problem. See item C9. I had to re-name my Mac, Time Capsule, network, etc... to remove all apostrophes and spaces.
Pondini #7: If you have WD SmartWare installed on Lion, it's not compatible, per RoaringApps, and there are reports it can cause this problem as well. Use Western Digital's uninstaller, or delete the app from /Applications and the files com.wdc.WDDMservice.plist and com.wdc.WDSmartWareServer.plist from /Library/LaunchDaemons. There may also be a file in Library/Application Support.
I then had to shut down computer, unplug Time Capsule, unplug modem; plug everything in again, then reboot computer; then had to go to Apple- System Preferences- Network- and reselect my Time Capsule to connect to WiFi again.
Then opened Time Machine preferences again and attempted back up - it worked!

Could not delete service error

Similar Messages

Maybe you are looking for